Mount a TFTP Server

Hi
I need to launch a tftp server in my box. Anyone can provide me an explanation on how to do this.
Did some research, installed the tftp-hpa, but can't connect to localhost. Any advice?

There are somethings that you need to do to make your tftp server work.
1. To allow others to connect to tftp server, add this line to /etc/hosts.allow file:
in.tftpd:ALL
2. By default, tftp server does not allow your to upload file, so you need to modify the /etc/rc.d/tftpd script so that it will allow you to upload file. It will look like this:
start)
    stat_busy "Starting TFTPD"
    [ -z "$PID" ] && /usr/sbin/in.tftpd -l -s -c /var/tftpboot
3. Change the /var/tftpboot attribute so it allows other to upload file:
#chmod 777 /var/tftpboot
You need to manage your server because it will open a hole to others to upload files to your servers. You can control it by using /etc/hosts.allow file or using iptables.
Cheers.

Similar Messages

  • ASA 5505 Backup Config to TFTP Server

    Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message. Thanks in advance.

    What kind of error message did you get?
    ciscoasa# write net ?  WORD  IP address of tftp server and file name :. Place IPv6        address within square brackets. 

  • How to Setup Windows TFTP Server in Windows 2008 R2

    Hi,
    Can anyone please let me know, how to install TFTP Server in Windows 2008 R2.
    I installed Windows Deployment Service to get TFTP (got this info in some forum), but I did not see TFTP Service in the Service Manager.
    I am a newbie so plz let me know the steps in details.
    Thanks in advance.

    James, WDS ships with a TFTP server as part of the suite of services that are required to boot from the network. The information you've posted above is not correct.
    Hi Aaron,
    Thanks for your clarification. Towards the WDS TFTP Server, we could find the following statement below:
    You use the Windows Deployment Services Trivial File Transfer Protocol (TFTP) server to download the files that are needed to do a network boot using the Pre-Boot Execution Environment (PXE).
    From:
    WDS TFTP Server
    I understand that the we could select Deployment Server and Transport Server during the WDS setup processing. However, neoraghav would like to install TFTP server from the Server Manger towards the Windows Server 2008 R2. I noticed the statement as followed:
    The TFTP client is optional software, and marked as deprecated on Windows Vista® and later versions of the Windows operating system. A TFTP server is no longer provided by Microsoft for similar security issues.
    From:
    Trivial File Transfer Protocol (TFTP) Overview
    I should make my reply as clear as possible. Sorry for confusion. :-(
    Regards,
    James
    James Xiong
    TechNet Community Support

  • Portal on Unix cannot mount Windows File server

    Hi Experts,
    We had installed a NW 7.0 portal onto HP-UNIX server and integrated it with MS AD server. Now, we are facing an issue that we cannot mount windows files server when we tried to configured it with TREX. Had anyone tried this function or it is the limitation? Is the following statement still correct or do we have workaround solutions?
    "If you are using the Microsoft Active Directory Service, you can only integrate documents into a Windows portal. The combination of Microsoft Active Directory Service and a UNIX portal is not supported."
    Best Regards

    Hi Tom,
    have a look at this link:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
    Your issue should work, but the prerequisite is for using the windows permissions:
    "If you are using Microsoft Active Directory Service, you have to operate the Windows domain in mixed mode". If it is running in Native mode you cannot use the windows permissions. Nevertheless integrating documents into KM should work. The KM uses its own permissions instead.
    Best regards,
    Denis

  • How to configure logs to be sent for TFTP server !?

    hi
    I want to let the router or the switch to sends the log to TFTP server, how can I do that !?
    including things like debug commands results
    thanks,

    You want to send the logs to the Syslog server..right? Use the logging command to do it.
    logging x.x.x.x is the command.
    Use the logging trap command to set the level of logging.
    Router(config)#logging trap ?
      <0-7>          Logging severity level
      alerts         Immediate action needed           (severity=1)
      critical       Critical conditions               (severity=2)
      debugging      Debugging messages                (severity=7)
      emergencies    System is unusable                (severity=0)
      errors         Error conditions                  (severity=3)
      informational  Informational messages            (severity=6)
      notifications  Normal but significant conditions (severity=5)
      warnings       Warning conditions                (severity=4)
      <cr>
    CF

  • Change default block size on tftp server

    Is there a way to change the default block size on the tftp server so that it defaults to 1024 instead of 512
    I am aware that the client can accomplish this by:
    tftp> tsize
    tftp> blkzise 1024
    but I don't want the client to have to enter these additional commands.

    Were you ever able to get an answer on this? I have the same question.

  • Replacing a TFTP server in a cluster

    Replacing a TFTP server in a cluster and with everything else being the same minus the MAC address on the NIC, are there any issues I could possibly run into here?
    Thank you for the help the server is an MCS7845H2.

    No issues, MAC address is irrelevant on TFTP as it only matters on the Pub, simply install CUCM on the new server assigning the same IP and hostname and then restore from backup.

  • Send the Configuration via TFTP server to New Router/Switch

    Dears,
    I need to apply a policy that for any new router or switch installation, specific configuration will be sent to these devices through one centralized TFTP server which comply with our configuration and rules, this is to avoid any miss configuration from the team and control the junior network Engineer to add any wrong configuration that can effect the network, is this possible? And how?

    Dears,
    I
    need to apply a policy that for any new router or switch installation,
    specific configuration will be sent to these devices through one
    centralized TFTP server which comply with our configuration and rules,
    this is to avoid any miss configuration from the team and control the
    junior network Engineer to add any wrong configuration that can effect
    the network, is this possible? And how?
    Hi,
    I dont think is there any mechanism but yes to secure you can configure on router that tftp source interface for tftp server cofniguration upload and download into router or on server.
    Hope to Help !!
    Ganesh.H

  • Jabber-config.xml no longer UTF-8 after TFTP Server upload?

    I have a good jabber-config.xml I edited in Notepad++ and saved (UTF-8) and I upload it to TFTP via CMPlatform on CCM 9.1.2.11900-12.  I've done this in the past a lot with 8.6.2, never had any issues.
    I then restart CUCM TFTP services and download;
    C:\>tftp 10.7.8.3 GET jabber-config.xml
    Transfer successful: 2390 bytes in 1 second(s), 2390 bytes/s
    I then open up my downloaded jabber-config.xml in Notepad++ and it says the file format is UCS-2 Litle Indian and not UTF-8 and looks like the attached photo.  Greek.  I tried in Notepad++ to convert.
    I then setup a different test PC with Windows XP, etc. Same issue, also note that plain notepad sees the same problem.   Why is the jabber-config.xml file getting corrupted by the TFTP server?

    ChojinDSL wrote:Do you have a firewall running on that server?
    Are your clients also using systemd?
    Yes I do have a firewall, iptables, and it's the same configuration from before the migration to systemd.  Also note that I can access the shares when explicitly defining the path whether that's in a File Manager, cli or other so access isn't being blocked.  For lack of a better explanation the whole thing gives the appearance that although the Share is active it's just not broadcasting it's existence like it should be.
    I have two PC's, both Arch, one with Openbox and one running KDE that I have migrated to systemd.  Both can access the Share when the path is explicitly defined but don't see it when trying to just browse for the the Share.  I have a Xoom tablet, running Android Jelly Bean, that exhibits the same behavior.  I also have two media players, one an older WD LiveTV Plus model the other a newer WD LiveTV model, neither of which can see the share and browsing is the only option for those devices.  So I've got a pretty good assortment of devices and operating systems that could see the share when browsing previously but can not see the same share by browsing since the migration to systemd on the file server.
    Thank you.

  • ITL file is missing on my CUCM TFTP server

    Hello,
    I have a problem on my CUCM cluster : the ITL.tlv files on the TFTP server (on all CUCM are missing).
    When i check the file with the URL : CUCM_IP:6970/ConfigFileCacheList.txt i don't see the ITL.tlv the is just :
    SEPDefault.cnf 17 1
    MTPDefault.cnf 17 0
    CFBDefault.cnf 17 0
    SAADefault.cnf 17 1
    SDADefault.cnf 17 1
    lddefault.cfg 55 1
    gkdefault.cfg 55 1
    SIPDefault.cnf 827 1
    XMLDefault.cnf.xml.sgn 8148 7
    DefaultFP0000000000-c7a6c673-7479-46b0-839e-014d3d093963.xml.sgn 1863 1
    CFBHW-TR.cnf.xml 2893 1
    SEP123456789012.cnf.xml 7381 1
    SEP0CD996911C3D.cnf.xml.sgn
    I try to regenerate certificate on all CUCM, it's not OK.
    CUCM version : 8.5.1.15900-4
    I have 1 publisher and 2 subscriber.
    Can you help me please ?
    Best regards.

    Yes all CUCM and phones are impacted.
    There are big problem on my phone, when i restart IPphone, there are :time problem, Softkey problem, URL button, ect... .
    All phone are registered on my CUCM SUbscriber1, when i execture show itl, i had a message error, i correct the issue by execute the command 'set web-security' and now when i exectue show itl i have : "The ITL file was verified successfully.".
    But i have 6 records :(on my subscriber01)
    TVS
    TVS
    CAPF
    TVS
    System Administrator Security Token
    TFTP
    TVS service is running on all CUCM.
    I already tried to restart all services and the problem persists

  • Add tftp server settings to dhcp

    I have a cisco 3750g that I use to hand out DHCP addresses. I also have a pxe server I'd like to be able to use. How would I add the next-server and the pxelinux file to the dhcp?
    Thank you!

    In your DHCP pool, you can define both the TFTP server and the boot file using the following format:
    ip dhcp pool DHCP_Pool_LAN
    next-server x.x.x.x
    bootfile pxelinux.0
    Just replace x.x.x.x with the address of your TFTP server.

  • Copy all files in Flash to FTP or TFTP server

    Is their a way to copy all the files at once in a router's flash to a FTP or TFTP server? Thanks.

    No. On a switch you can create a tar file containing all the files and upload that one file but on routers you can only extract them. You will have to write some sort of wrapper with a chat script to do this. Sorry I don't have better news.
    HTH pls rate!

  • TFTP Server on 10.4.7

    I am trying to get the TFTP server to work on my new intel mac. It seems to be running, but whenever I try to put a file or get a file it returns Transfer timed out. Any clues?

    Welcome to the Forum!
    Not sure if TFTP is the standard (built-in) ftp server, but, when you go to System Preferences and select "Sharing", under the Services tab, is "FTP Accss" checked? I think that is the way you enable FTP. If you've done this, then you should be able to ftp to the machine from other machines in your local network. Do you ftp to an ip address? Can you give a bit of more information?
    Thanks,
    Alfredo

  • Dumping mount point one server to another server same configration

    We are trying to dump the mount point one server to another server same configration.If we copy all things from current server to newserver on same mount point /file system,same directory.I am doing this activities first time.Is it anybody clear my question?
    1.I don't need to install oracle and database
    2.what parameter I have to set for that?
    Oracle 10g
    OS:Solaris 5.10

    Oracle instances are physically disconnected from Oracle databases.
    The instance determines the database to open based on initialization parameters (init.ora and spfile) and environment variables: ORACLE_SID.
    The docs are at http://tahiti.oracle.com.
    You need to read the docs and understand the full scope of the issue. A couple of quick paragraphs in a forum is not what you need. Also consider asking your manager to hire a consultant to help you with the project and provide you with some mentoring.

  • Cisco Prime TFTP Server Question

    Our organization recently installed Cisco Prime 1.3 on a Linux box.  I am used to using the older WCS which also had a built in TFTP server.  The old WCS was installed on a Windows Box and thus I was able to navigate to the TFTP server using Windows Explorer and the UNC path.  However, I cannot seem to access the TFTP server on the new Prime 1.3 server via that method.  I have verified that the TFTP and FTP servers are both enabled in Prime server settings and I have also verified that I can access the FTP port via a PC on the network and that the WLCs on the network are sucessfully backing up to the Prime TFTP server each night. 
    How can I access the TFTP server to retrieve these WLC backups if needed?  

    you need to enable root access.  then you can scp the files out of the directory easily enough.
    from cli
    root_enable
    follow prompts
    root
    psswd - set password
    should be abel to ssh as root at that point, if you can want to say it's /localdisk/tftp, or just ls /localdisk
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

Maybe you are looking for