Mount poinst not compatible for language DVD;s in configuration pgase.

Dear all,
I have an starnge issue. we are in process upgrading system from ECC 5.0 to ECC 60. EHP4 sr1 SP03.
So, as part of plan i have used language DVD's 51036904_1 to 8 & run till cheks phase successfully , however we found some errors recurring errors & decided to run from starting .
Ttherefore we have rectified & started re-run from initalization & i have given the mount points properly in extraction phase. & finished successfully with out any issues.
Now i configuration phase i am aked to enter mount point of DVD's again.. the follwoing is the message in configuration phase.
please enter mount points for the dvd's required for the upgrade.
Enter atleast mount point for the DVd titled "Language DVD for the product ERP and languge DE"
i feel strage as i wrked with same media earlier on the same system with out any issues till the end of checks phase..
media used - 51036904_1 to 8 for languages.
Hope some one understand my entire issue & please advice me on this.
-rahul
Edited by: Rahul on Jul 20, 2009 9:23 PM
Edited by: Rahul on Jul 20, 2009 9:25 PM
Edited by: Rahul on Jul 20, 2009 9:28 PM

Hi Rahul,
Copy the content of the media to local disk and try.
Regards
Ashok Dalai

Similar Messages

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

Error message :PurchOrder : Unit of measure PC not defined for language ES,

Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
Shaiek

Hi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Hello sir this is anshul from india i am using i phone 4 16gb and my i phone is hanging on daily basis with my views i am thinking may be ios 7.1 is not compatible for the i phone 4 and if it can be possible my software can be degrade kindly tell me as oo

HELLO APPLE SUPPORT THIS IS ANSHUL FROM INDIA AND ONE THING I WANNA KNOW HOW CAN WE DEGRADE THE SOFTWARE OF I PHONE BCZ I AM USING IOS 7.1 BUT IT IS NOT COMPATIBLE FOR THE APPLE 4 16GB SO IWANNA DEGARDE IT KIINDLY TELL ME AS SOON AS POSSIBLE

Hi anu,
Apple provides no downgrade path for the iOS. You need to check your setting and do some troubleshooting (do a search of this forum for suggestions). I have an iPhone 4, and I am running iOS 7.1.1 with no issues.
Cheers,
GB

It says the application not compatible for this ipod

it says the application is not compatible for my i touch

How can I find apps that will work on this older Ipod touch? I can't even find a section that only applies to Ipod touch games.

Are the Ideapad Series not compatible for upgradation to Win 7?

Is IDEAPAD S 10-2 not compatible for upgradation to Windows 7?
It's not listed in the compatible group list by Lenovo but Lenovo advises to run the Upgrade Advisor.
My machine was built in Jul 09. Lenovo site says systems built after Oct 09 support Windows7. As such, is this system not compatible?

Hi did you see this that answer your quest...
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Windows-7-Official-Drivers-are-released-the-wa...
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7
Windows 7 Driver Help
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Forefront Endpoint not compatible for Windows 8

Forefront Endpoint is not compatible for Windows 8.
What else does Microsoft offer as an antivirus
for Windows 8 Machines?
Or do they have a version compatible for Windows 8?

Hi,
Here it is our official answer for that:
http://blogs.technet.com/b/mmpc/archive/2013/10/09/our-commitment-to-microsoft-antimalware.aspx
You can understand more from this :
Goodbye Microsoft Security Essentials: Microsoft Now Recommends You Use a Third-Party Antivirus
Tarek Majdalani | MS Forefront Edge Security MVP |
http://www.elmajdal.net

Warning: Action and Event are not compatible for LinktoAction type

Hi,
I get a warning message "Action and event are not compatible" for the action associated with the type LinkToAction. The Action method "ShowDetails" has the parameters wdEvent (default) and IWDNodeElement.
Can anybody please suggest what causes this warning?
Regards
Sagar

Sagar,
Unfortunately, it is impossible to remove this warning completely. However, you may safely ignore it.
What you can do is copy text of warning (or part of text), then click "Filter" icon on Tasks view in IDE and set filter to hide these warnings. I do this for annoying "UI element has no lable text"
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Why is the a505 series not compatible for the windows 10 upgrade

Why is the a505 series not compatible for the windows 10 upgrade. It does not show up in the system available for the upgrade.

Nobody said that it wasn't compatible. Microsoft makes that determination. Toshiba, however, has chosen not to write new utilities and drivers for it for Windows 10.

I have a power mac OSX version 10.5 but firefox says my system is not compatible for firefox 4 download. What else can I use?

My main problem is that I cannot seem to download flashplayer 10.1. Adobe says to try downloading another browser such as firefox. I click on that and it says firefox 4 is not compatible with my computer. HELP

For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
Or use Firefox 3.6.17: http://www.mozilla.com/en-US/firefox/all-older.html

We purchased infinity blade and when we try to sync it on our itouch 3rd gen it says not compatible for this ipod

We purchased an app called infinity blade and when trying to sync it to our 3rd gen ipod touch a message pops up on computer the it is not compatible to this ipod?

Let me guess; you bought an iPod Touch that was labeled as an iPod Touch 3rd gen 8 gigabyte. first off that doesn't exist, apple resold the 2nd gen 8gb when the 3rd gen came out, as it would be a cheaper option for people. the 2nd gen is severely slower than the 3rd gen, and so infinity blade can not run on it, as many current games cannot as they are too powerful and barley work on a 3rd gen already, playing choppily and they lag a ton. Check to make sure the app requirments in the side of iTunes store says your device can work. Many stores labeled the re-release or the 2nd gen, which included the then current update which would have cost money for older devices, as a 3rd gen for some reason, even though Apple did not. If you do not believe me, check on apple for the list of iPod's that exist, labeled "Which iPod do I have?" also, you can check to see if you can update to iOS 5.0.1, the current iOS version, which can only be put on 3rd gen iPod touches and above, without a hack, as there is no more that can be put on older devices, as the new features require a faster CPU and more RAM, again, not enough in a 2nd or lower.

Mount poinst not compatible for language DVD;s in configuration pgase.

Similar Messages

Maybe you are looking for