Mount raw devices from one plarform to another?

Hi,
I would like to know if it is possible to mount raw devices from one platform on Tru Filesystem to another platform on HP-UX running ASM? I am asking that to know if we can save precious time avoiding copying the datafiles from our Tru64 server to our HP-UX server. If this can be made, the "only" work we would have to do is transporting tablespaces via Transportable Tablespace.
Thanks for your attention.

When I do File>Import the only two options I've are "Files" and "Show iPhoto Browser".
Hello Pedro,
what is your Aperture version on the iMac? The File menu should look like this in the current version 3.2.2. Do you only see two items, or are some options greyed out?
unfortunately I had erased all the files from the pendrive
Why? Not much space on the pendrive? erasing images is no good idea, if you are searching for missing master image files - next time you have any kind of trouble with unconnected masters, keep all existing copies of your images, until you have reconnected the versions safely and are dead sure where the original masters are stored. If you accidentally moved the masters, you may be erasing the only copy you still have.
Thus said, what is on on your pendrive right now? Do you still have the exported library there? If so, you may try the following:
I think you may have a permissions problem or formatting problem with the pendrive.
Is pendrive formatted MacOS X extended? If not, then reformat it (with DiskUtility) to MacOS X extended, if you want to use to to transfer images between Aperture Libraries. Pendrives usually come preformatted for Windows users, and Aperture does not recognize all formats, i.e. MS Dos (FAT) is not supported by Aperture. Reformatting will erase the drive, however.
Set the permissions on the drive to "ignore ownership on that volume": Select the pen drive in the Finder and then press (command)⌘-I to open the Get Info panel. At the bottom of the panel you should see a checkbox "Ignore Ownership on this Volume" (if your drive is MacOS extended). Set this flag.
Also check the permissions of the Aperture Library on this drive - you shoud have read-write permissions, and the perpissions of any enlosing folder.
Regards
Léonie

Similar Messages

  • How to insert records with LONG RAW columns from one table to another

    Does anybody know how to use subquery to insert records with columns of LONG RAW datatype from one table to another? Can I add a WHERE clause in the subquery statement? Thanks.

    Insert into ... Select statements are not supported for long or long raw. You will have to either use PL/SQL or convert your long raw to blobs.

  • Moving RAW files from one drive to another without loosing all your work in Lightroom

    I am posting this for two reasons, the first is I have been trying to figure out how to get my raw files off my hard drive & onto my external hardrive for ages, as my laptop is filling up & slowing down with the huge files my new camera captures. I have been researching this & have found it hard to find a clear answer to my particular problem using Windows 7 not a Mac.
    After loosing some files in Lightroom when I moved them within Explorer instead of Lightroom, & being unable to figure out how to add a new drive in the Library module in Lightroom to move them to, I wanted to make sure I got it right when I moved the lot of them. I finally figured out a way, it might be round about, but it got it done without any trouble.
    This is how I moved my files:
    In Windows Explorer I moved one folder which Lightroom uses, from my laptop to the drive I want to store them all on from now on.
    Then in Lightroom, under 'Library' (along the top, eg 'File' 'Edit' 'Library' etc) I selected 'Find missing photos' & led Lightroom to the new location. Now my external hd as well as my laptop hd was listed under 'Folders'  (on the Left hand side of the screen along with 'Navigator' 'Catalog' 'Folders' etc) in the Library module.
    After that it was simple. Just a matter of dragging & dropping from my C drive (laptop)to my G drive (external hd) while in Lightroom; Library module. This way Lightroom keeps track of where the files are stored & nothing is lost.
    From now on I will be importing raw files from my camera to my external hd & working on them all from there.
    If anyone has a simpler way please share it. I am very new at this & don't profess to be an expert. So any advice would be greatly appreciated
    The second reason for this post is that I'd like to know how to make sure that the adjustments made in Lightroom are stored on the external hd as well, incase anything happens to the laptop?
    Is exporting the catalogue what I need to do?
    Or can I back up the Lightroom adjustments to my external hd somehow?
    OR when I moved the raw files did this information move with them?
    I understand that my raw files are the original unaltered files & that the changes made in Lightroom are recorded seperately & applied in Lightroom itself..... Well, that's what I think I know about how it all works after a few months of using it, so please forgive me if I'm missing something & I'll be very happy to be enlightened if you'd be so kind
    Happy New Year to you all!

    All the adjustments are stored in the catalog (not in the file). So you want to back it up, and the external is a good place. In the catalog settings (Edit > Catalog Settings > General) there is an option to set a regular backup schedule, and you'll be asked where you want to put it.
    The backup is just a regular copy of the catalog, and you can simply launch Lightroom from that, by double-clicking it.
    The image files themselves should also be backed up of course, but that's outside Lightroom.

  • Transfering raw files from one computer to another after LightRoom selection

    Hello,
    I'm trying out lightroom and love it so far. One quick question. If my assistant makes a Collection for me to work on later, how can I get the RAW files from that collection to work them on a different computer. I looked at the export option but it's only JPGs or DNF, and I want the RAW files. Can she export the RAW files for me? How?
    Thank you in advance

    Thanks for your info. I'm a bit confused.
    Don, if she exports the XMP sidecards I still need to have all the original files on my machine, and then filter accordingly correct? I only want to bring to my machine the Good Files. I don't want to waste time with the bad ones.
    What do mean by letting her access both?
    Harrison, are you saying to export the whole collection as DNG files and burn it onto a CD or something so that I can bring it into my computer? I'm not sure what you mean by letting my assistant "import them into the library on her computer" did you mean "my" computer?
    Also right now I use bridge and I sort pictures by date created (multiple cameras) and then rename them with a prefix starting with 001. Can I do this in LightRoom.
    Thanks again for all your help.

  • How is it possible that my events in calender are not synced correctly on my devices from one day to another?

    Yesterday evening I was changing events in my calender of my ipad3, since then the syncing between ipad, iphone and Macs went weird! The changed items of yesterday are only on my ipad but not on the other devices anymore! What did I wrong? I did not change the calenders, just one repeat-event! Please help :-)

    Mike blessing wrote:
    You mean if I change the password, he will never spy on me again?
    There is no way i can answer that, there area a million ways one person can spy on another in this day and age.
    However if you were to wipe the phone and  set it up as new  plus change all your associated Apple passwords to ones your ex can;t guess, then I can say he couldnt 't tracking you through the phone. Wiping and reinitializing it would be the same as getting a new one so I don;t think you need to go through that expense.
    However assuming this post is real and you are experiencing the situation you describe you need to contact the authorities. There is no way anyone here can know the true seriousness of the situation and to be giving advice on this issue is wrong. We could be causing you to fell a false sense of safety. Because of that this will be my last post here.
    So please do what I recommended to the phone and then seek out the proper help.
    good luck
    regards

  • Can't see all devices from one AccessPoint to another? What is best setup to extend wireless coverage?

    We have just moved into a new apartment with concrete walls, hence WiFi signal is quite weak in the other end of the apartment.  Not all devices can see each other depending on which AP i am associated to.
    Basically I want to have any wired/wireless devices be able to see my NAS/Office based components and keep the LivingRoom tidier.  Only device in LivingRoom will be ISP components and AppleTV.
    Some additional notes on current setup
    - LivingRoom has the ISP issued Router/AccessPoint
    - the ISP Router/AP is currently setup as a) AccessPoint b) DHCP server and c) default gateway to get to the Internet
    - LivingRoom AP SSID is 'LivingRoom'
    - DHCP pool is on the 192.168.1.0/24 range
    - Default GW is 192.168.1.254
    - in the LivingRoom i am also using the Router/AP ethernet ports for AppleTV
    - connected to the Router/AP is a long Ethernet cable to the other end of the apartment in the Office
    - on other end of the long Ethernet cable is an Airport Extreme in the Office on the WAN port
    - the AirportExtreme is setup in 'Bridge' mode
    - Connected to the Office_AirportExtreme is a) a NAS device physically in the Office via Ethernet cable b) WebCam in BedRoom2 via WiFi
    - Office_AirportExtreme SSID is 'Office'
    - all devices confirmed are assigned an IP from the LivingRoom Router/AccessPoint and on the 192.168.1.0 pool
    - at this time in only have WebCam and NAS however Plex and Desktop coming shortly as we are still unpacking
    Issue
    a) When my laptop is associated to SSID 'Office' i can see the NAS and WebCam; able to PING and hit via HTTP
    b) When my laptop is associated to SSID 'LivingRoom' i CANNOT see the NAS/WebCam;  I am unable to hit the two devices behind the Office_AirportExtreme via PING/HTTP and I am able to surf the Internet, however cannot see the NAS/WebCam
    Question
    a) is there some other config on the Office_AirportExtreme that must be done to disable any Firewall type capabilities that is limiting the ability for devices on other side of the Office_AirportExtreme from seeing the devices behing the Office_AirportExtreme?
    b) is this ideal config?
    c) is it typical to have different SSID?  would like to get to just single SSID for the apt, however not sure if there will be conflict i'm not aware of.
    Totally open to any suggestions on others that have done this before to avoid reinventing the wheel...
    See pic below... 
    Thx -Ray

    Note that after additional poking around and disabling Wi-Fi all together confirmed that when wired to either the ISP Router/AP or the Office_AE, i am able to see both NAS and WebCam behind the Office_AE. 
    The issue seems to be with the ISP Router/AP where by there is a difference in behavior when connected via Wi-Fi vs Wired.  All is well with the AirportExtreme from what i can gather.
    i'm just going to pickup a separate Wi-Fi access point to provide coverage for the LivingRoom area instead of trying to figure this out further.  
    FYI.  I am in Singapore using SingTel Fiber service and the ISP Router/AP i am using is Aztech DSL7000GRV(S)

  • How do I change my devices from one computer to another

    Hello,
    I have my devices on an iTunes account in my laptop.  I purchased a new Desktop PC and wish to switch iTune accounts to sync my devices in my desktop PC.  I also have Mobile me.
    George

    geosnz wrote:
    I transfer all from my laptop into a Flash Drive
    you can also use your LAN.
    then res-install all into new PC?
    nothing to re-install (except, perhaps, the iTunes application). copy it over and launch iTunes - everything will be there.
    Will they all be lost or corrupeted in some way or lost.
    no.

  • How do I move a quick collection of RAW files from one computer to another?

    I will be traveling this weekend I will have all of my pics backed up on my laptop. I will be culling on the flight home. What's the easiest way to move that quick collection to my desktop when I return home? Thank you in advance.

    Export the quick collection as a catalog and then port it as same

  • When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?

    When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?
    I don't mean the ability to see what tabs are open on another device (I know how to do this). But if I am at work and find something that I want to read at home, it would be helpful to 'send' the tab to my home PC so that when I return home, it will automatically open that tab for me.

    Can anyone help?

  • Copy Long raw from one table to another.

    Hi
    I am trying to copy data from one table to another. Source has one Long Raw column. There are about million rows in source table. And I am using Oracle 8.1.5. Whenever I execute the copy command, I get the following error message: Can someone help me?
    SQL> set long 64000000
    SQL> set copycommit 1
    SQL> set arraysize 100
    SQL> COPY to test/test@testfix CREATE resume_bkup1 using select * from resume;
    Array fetch/bind size is 100. (arraysize is 100)
    Will commit after every array bind. (copycommit is 1)
    Maximum long size is 64000000. (long is 64000000)
    ERROR:
    ORA-01084: invalid argument in OCI call
    SQL>
    Thanks
    V Prakash

    insert into emp_personal(emp_no, emp_pic) select emp_no, emp_pic from emp_personal_old where empno = '10059'
    Read the documentation as suggested by sol.beach.
    And fix your front-end to use supported datatypes.

  • Can i transfer everything from one ipad to another so both have exactly the same things

    Can i transfer everything from one ipad to another so both have exactly the same things?

    Yes. Copy your apps and other iTunes purchases/downloads to your computer's iTunes via File > Transfer Purchases (File > Devices > Transfer Purchases if you have iTunes 11 on your computer), then backup up the first iPad and restore that backup onto the second iPad.
    Backups and restores : http://support.apple.com/kb/HT4079
    Things that aren't included in a backup include the contents of the Music and Videos apps (but they should be on your computer's iTunes) and photos that were synced from a computer. Also you will need to enter your passwords (email, wifi, website) on the second iPad - they won't be restored onto a different device, only back onto the device that the backup came from.

  • HT5035 How do I transfer credit from one account to another?

    How do I transfer credit from one account to another.  I have 2 IDs because we have a lot of devices.  I want to transfer credit from one Apple ID to another Apple ID.

    You don't.
    (72323)

  • How can I send stuff from one iPhone to another via Bluetooth?

    How can I send stuff from one iPhone to another via Bluetooth?

    There are some apps that will let you send photos from one iOS device to another over BT.

  • How do I move my itunes account from one country to another?

    How do I move my itunes account from one country to another?  I set up my itunes account in the United States and now I live in England.  I would like to transfer my purchases from my US account to my British account and then download them onto my new ipod.  I have uninstalled and reinstalled Itunes and I have updated my Windows 7 operating system.  I have tried to get in touch with apple and the advisor said he could not help me.  Ideas? 

    Before you change the country, note the following:
    - you must use any remaining store credit on your account
    - download all purchased content
    - ensure you have no current rentals(if you do, you'll have to wait for them to expire)
    - provide a new payment(such as a credit or debit card) associated with a valid billing address in the UK or an iTunes Gift Card purchased in the UK
    - content purchased from the iTunes Store is country-specific. If you wish to upgrade any of your iTunes Store content to iTunes Plus, you'll need to do this before you change countries. The content you purchased while your account was set to the previous country will not be eligible for upgrade once you've changed countries.
    - after you change countries, you will no longer receive application update notifications in iTunes for the apps you purchased in your original country. However, you'll still receive update notifications on your iOS device for any applications installed on it. In addition, you'll be able to download previously purchased applications again for free if they are available on your new country's store. You will not be charged and the download will not appear on your Purchased page. If a previously purchased application is not available in your new country, you will not be able to download it again for free.
    - If you have an iTunes Match subscription, you can't change countries until the subscription has expired.
    - If you have purchased a Season Pass, you cannot change the country associated with your account until that season is done airing and the last episode of the season has been added to the iTunes Store.
    Taking the above into consideration, here's how to change your country:
    1. Open iTunes and click Sign In.
    2. Enter your iTunes Store account name and password, then click Account Info.
    3. On the Apple Account Information page, click Change Country or Region.
    4. Enter the updated information and save your changes.

  • Ipod will not update from library after transfer from one PC to another?!?

    I recently transfered my itunes library from one PC to another using the ipod hard drive and according to the directions listed on this site. All went smooth and roughly 12GB of music transferred. After all music was successfully transfered to the library on the new PC I reconnected my ipod via USB hub and the dialog box popped up asking if I now want to associate my ipod with this new computer. I replied Yes.
    As expected the program then deleted all 3000 songs off of my ipod and was supposed to then upload all the songs from my library (all songs were checked) back onto my ipod. For some reason all that happens is it says "update complete" and no songs transfer. I now have 3000+ songs in my library and ZERO on my ipod! I've checked all the default settings to be sure it is set to automatically update, all songs are checked and the box is checked to update checked songs, etc. I've shut down and restarted my PC and even tried several different USB hubs. Also, if relevant, when I connect my ipod the computer itunes recognizes it and it shows up on the itunes screen, but just for a few seconds. After it says it has successfully updated my ipod (I wish...) the little tab which shows "Chris' ipod" then disappears and itunes acts like it doesn't even know a device is connected.
    I'm lost - I'd really appreciate any feedback anyone can provide. Thank you in advance!
    Chris
    20GB click wheel   Windows XP  

    I recently transfered my itunes library from one PC
    to another using the ipod hard drive and according to
    the directions listed on this site. All went smooth
    and roughly 12GB of music transferred. After all
    music was successfully transfered to the library on
    the new PC I reconnected my ipod via USB hub and the
    dialog box popped up asking if I now want to
    associate my ipod with this new computer. I replied
    Yes.
    As expected the program then deleted all 3000 songs
    off of my ipod and was supposed to then upload all
    the songs from my library (all songs were checked)
    back onto my ipod. For some reason all that happens
    is it says "update complete" and no songs transfer. I
    now have 3000+ songs in my library and ZERO on my
    ipod! I've checked all the default settings to be
    sure it is set to automatically update, all songs are
    checked and the box is checked to update checked
    songs, etc. I've shut down and restarted my PC and
    even tried several different USB hubs. Also, if
    relevant, when I connect my ipod the computer itunes
    recognizes it and it shows up on the itunes screen,
    but just for a few seconds. After it says it has
    successfully updated my ipod (I wish...) the little
    tab which shows "Chris' ipod" then disappears and
    itunes acts like it doesn't even know a device is
    connected.
    I'm lost - I'd really appreciate any feedback anyone
    can provide. Thank you in advance!
    Chris
    20GB click wheel  
    Windows XP  
    In iTunes Preferences, did you update the iTunes Library to the new location? In other words, are you pointing to the correct location on the new harddrive for your iTunes Library?
    Lisa

Maybe you are looking for