Mount windows file server over vpn

I have a Windows(2003SP2) file server within some LAN with IP 192.168.10.10 and with shared folder structure like
/Sity/District/
I am authorised to connect to this LAN over VPN (it works) and to connect to /Sity, but I am authorized only to see and modify files within /District folder.
With the command 'smbclient -U username //192.168.10.10/Sity' in Terminal I can connect to the server and e.g. get all the files from /Sity/District/. However, neither mount_smbfs in Terminal nor Connect to Server in Finder can mount the share - error is
mount_smbfs: negotiate phase failed: syserr = Connection refused, Finder complain about the username and the password. The /etc/nsmb.conf has the following structure
[default]
minauth=none
Is there a way to mount such share?

Yes, it replies 'could not connect to the server because the name or password is not correct'.
Same for almost all combinations of smb://WORKGROUP;user:password@IP/Sity[/District]
I also tried different options for mount_smbfs like '-I' with no result. Error reads
mount_smbfs: negotiate phase failed: syserr = Connection refused
There is also no network browsing (mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.)
But the smbclient works and I can get the folder structure.

Similar Messages

  • Portal on Unix cannot mount Windows File server

    Hi Experts,
    We had installed a NW 7.0 portal onto HP-UNIX server and integrated it with MS AD server. Now, we are facing an issue that we cannot mount windows files server when we tried to configured it with TREX. Had anyone tried this function or it is the limitation? Is the following statement still correct or do we have workaround solutions?
    "If you are using the Microsoft Active Directory Service, you can only integrate documents into a Windows portal. The combination of Microsoft Active Directory Service and a UNIX portal is not supported."
    Best Regards

    Hi Tom,
    have a look at this link:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
    Your issue should work, but the prerequisite is for using the windows permissions:
    "If you are using Microsoft Active Directory Service, you have to operate the Windows domain in mixed mode". If it is running in Native mode you cannot use the windows permissions. Nevertheless integrating documents into KM should work. The KM uses its own permissions instead.
    Best regards,
    Denis

  • Query on integrating windows file server into SAP KM using WEBDAV

    hi
    I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
    Regards,
    Ganesh N

    Hi Ganesh,
    this should work in principle.
    However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
    In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
    Best regards,
    André

  • Problem while integrating windows file server into SAP KM using WEBDAV

    Hi
    I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
    <b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
    In the log i am getting the following
    ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
                           Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                           Right-click 'IDBSRV8' and choose 'Properties'.
                           Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                           Select 'Use any authentication protocol'.
                    ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
                           Please check the SPN by calling 'setspn -l IDBSRV8'.
                           If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
                           Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                           Right-click 'IDBSRV8' and choose 'Properties'.
                           Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                           Select 'Use any authentication protocol' and choose 'Add'.
                           Select 'Users or Computers' and enter IDBSRV8 as object name.
                           Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
    Can anybody please help me in this regard???
    Regards,
    Ganesh N
    Message was edited by:
            Ganesh Natarajan

    Hi Ganesh,
    this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
    The SSO22KerbMapModule works as follows.
    1. It receives a SAP Logon Ticket from the WebDAV request.
    2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
    3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
    So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute  that is specified in the ini-file .
    Best regards,
    Andre

  • Can I store referenced master files on a shared folder on a windows file server?

    I have a windows file server where I have setup shared folders that my Macbook can access. Is it a supported configuration to keep my referenced master files on the windows share?

    I hardly ever use the Bridge.  I mostly use the Bridges to work one groups of new image RAW to edit metadata and create ACR settings.  I don't use bridge features like collections or use the bridge to organize my image and I also don't use Lightroom.    I mostly use Photoshop and Window's File explorer with my Image files.  I have installed FastPictureViewer Codeg package to get thumbnails  for RAW and PSD files in a Window's dialog.   I don't like the delays introduced in workflows that are cause by the overhead requires for Bridge Cashes and Lighroom Databases.
    However for you with 50 users sharing assets on network drives I would think you would need a library system above and beyond Bridge and Lightroom. A library system that provides access and version processes so users don't step on each others work.
    If you want to use the bridge I do not believe it would be possible to use a shared cashed where multiple instances of the Bridge could concurrently maintain a common cache. I do not believe either Bridge or Lighroom design would have the locking protocols required for shared concurrent use.

  • Urgent: integrating windows file server into ep using KM.

    hi..
    can somebody give me detail steps of integrating windows file server into ep using KM.
    when i give password in the network path it is not accepting the password of the windows....
      Good answers will be rewarded points...
    bye....

    Hi,
       You can check:
    System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
    Root Directory can be:
    machine\sharedirectory
    and in CM-Global Services-Network Paths->create a new item
    in Network Path field:
    machine\sharedirectory
    enter your password
    user: domain\user
    Integrating Documents from a Windows System into KM
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
    Patricio.

  • Connect Mac to Windows 2012 Server via VPN

    Hello All,I'm having a bit of an issue connecting a Mac running Yosemite (OS 10.10) to my Windows 2012 Server via VPN. I'm able to connect all of my Windows 7 machines to the VPN using windows networking without any issues. I'm using my subdomain URL that points to my server that is used to provide access to the Remote Web Access portal on the the server. All Windows 7 computers connect right away and without any issue using their login.When I put the same information into the Mac it immediately denies the connection.Here are some of the details without revealing to much.Server = Windows 2012 R2Firewall = Sonicwall TZ400Connection I'm using for the Mac is pptp but, something tells me that I'm using the wrong protocol since I'm able to connect the Windows pc's using the https URL for the Remote Web Access portal.Thank you in advance for...
    This topic first appeared in the Spiceworks Community

    Hello All,I'm having a bit of an issue connecting a Mac running Yosemite (OS 10.10) to my Windows 2012 Server via VPN. I'm able to connect all of my Windows 7 machines to the VPN using windows networking without any issues. I'm using my subdomain URL that points to my server that is used to provide access to the Remote Web Access portal on the the server. All Windows 7 computers connect right away and without any issue using their login.When I put the same information into the Mac it immediately denies the connection.Here are some of the details without revealing to much.Server = Windows 2012 R2Firewall = Sonicwall TZ400Connection I'm using for the Mac is pptp but, something tells me that I'm using the wrong protocol since I'm able to connect the Windows pc's using the https URL for the Remote Web Access portal.Thank you in advance for...
    This topic first appeared in the Spiceworks Community

  • When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this.

    When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this?

    Look for a program called BlueHarvest. I'm not sure if it still works with Mountain Lion.
    I believe your file server can be set up to handle the metadata files, but I suppose that would depend on the Server software and your IT staff.

  • Can't Log In with Lync 2013 Windows 8 App over VPN

    Howdy,
    I've downloaded the Lync 2013 App to Windows 8.1.  When I type in my work email, I can't sign in.  I get that the server isn't available or doesn't support Lync.
    The error is attached.
    I can't find a forum for the Lync App itself so I'm hoping to be redirected or since this has to be an easy question, someone might answer it here.
    I'm logged in on our VPN and I'm working around this issue right now with RDP to my desktop and signing in to Lync 2010 there.  This is for the purpose of doing my class this next week from home and showing Yep, I'm really available over Lync. 
    What is really desired is to get Lync on my remote machine working but there's no real Settings page on the App.
    Apparently it does pick up the VPN and tries to sign me in:
    However, there's not much of a way to configure anything.  I can't find a "Settings" page. Tried uninstall/reinstall to see if I didn't fat finger something.
    Lync 2010 is set up on company laptops to work over VPN correctly from home so I can't imagine it's this hard.  I think the "oversimplified" approach of just putting in the email address and (I'm theorizing) letting Lync detect VPN or not,
    can I log in, etc. or whatever it does, this isn't working.  And of course, it's Encapsulated. :)
    OK, I have a work around, it's not a do or die issue here.  I'll RDP to my desktop, sign in and Lync will show me available.  I'll set my location as Home during the hours of the class.
    But ... it's always REALLY annoying when you KNOW it's a simple setup procedure and if that's just found ...
    Thanks for any help.
    Michael Durthaler

    Check that you configure requirement for Lync windows store App as exist in below link
    http://technet.microsoft.com/en-us/library/jj823129.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Migrate documents from the windows file server into km

    Hi All,
    I have around 100 GB of documents in a file server and i want to migrate the same data in to KM.
    I am sure that there should be some standard process to do this,can any one please help me out in solving this.
    Thanks
    Ajay

    Hi Ajay,
    what do you mean by migrate? You could use a Windows Filessystem KM-Repository to integrated these files directly into KM (http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm)
    Otherwise you could use WebDAV (http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm, http://help.sap.com/saphelp_nw70/helpdata/en/43/9600e5391e25dee10000000a1553f7/frameset.htm) or the Portal Drive (http://help.sap.com/saphelp_nw70/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm) to copy these files in a (for example) DB repository.
    Regards,
    Holger.

  • FSCT - Having Error "There were errors during running WordFileClose.dll scenario" when running the FSCT in controller & non-windows file server

    I encounter 2 errors in the controller when running FSCT.
    - "There were errors during running WordFileClose.dll scenario"  
    - "There were errors during running WordFileClose.dll scenario"  
    Does anyone has any ideas for this errors?
    I am using the following server to run the FSCT:
    - AD Server: Windows 2008 R2 SP1 x64
    - FSCT Controller: Windows 2008 R2 SP1 x64
    - Client: Windows 7 x64
    - File Server: Non-Windows Server (EMC Isilon)
    And the commands are as follows:
    > fsct prepare dc /users 10 /clients testing /password password
    > fsct prepare controller
    > fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
    > fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
    > fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
    fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFolders

    Dear all,
    The errors were:
    <Error>1264 DeviceIoControl 1{WINERR}</Error>
    <Error>Error executing scenario: WordFileOpen.dll</Error>
    <Error>943 DeviceIoControl 50{WINERR}</Error>
    <Error>Error executing scenario: WordFileClose.dll</Error>
    Do you have any idea about what the errors mean?
    Thanks,
    Rayson

  • Mac Lock Files on Windows File Server.

    Hi Pro,
    got some problem with Mac based design studio who have some weird issues with files locking on a Windows Server 2008 R2 server. After investigation, it is 100% a file locking issue. Some programs including preview, acrobat, indesign, finder or opening files (assuming locking them) and not releasing. Killing all the programs or remounting the share is working (releasing all lock files) but it's only a workaround not a fix. Do you any hints ? or Solutions ? all 10.7.3 Mac, using SMB protocol on a windows 2008 R2 File server.
    Thanks to all !!!

    yeah try this ... sorry french blog .. try google translate:
    http://clickpom.com/blog/mac-finder-lock-files-on-windows-server-smb-shared/
    this fix the issue for my client

  • Testing the windows file server documents in KM

    Hi all,
       I have configured WINDOWS as file server in KM.
       After configuring i should be able to share or access the docuemnts from the WINDOWS in KM
       How should i test WINDOWS documents in KM.ie., where can i find all the documents from WINDOWS in order to access it.
    Is it in the ROOT folder of the KM Content in Content administration or somewhere else?
    thanks in advance.
    Regards
    Sireesha.

    Hi,
      I have configured WINDOWS as file server in the following way.
      1.  Created a WINDOWS  system in the system land scape.
      2.  Configured servlet Engine User .
      3.  Created a Network path
      4.  Configured a File repository in the Content Management
      5.   User mapping is  done.
      Now my doubt is where should i go and check the WINDOWS documents or files after configuring it.
    Do v need to do anything else to get the all the files which are in WINDOWS.
    Pls guide me.
    Thanks in advance.
    Regards
    Sireesha.

  • File shares in EMC Isilon NAS not being accessible .........in windows file server

    Hi
    We have an odd issue in windows 2003 server where the users are not being able to access the shares in EMC Isilon NAS drives.
    Found that the KB 3002567 installed on last Tuesday March 10 2015, caused the issue and related to Data that resides on EMC Isilon clusters is unavailable to SMB/SMB2/SMB3 clients.
    Finally resorted to uninstall the particular patch from the Domain controllers of 2003 & 2008 and the shares are being accessible.
    Is there any alternative to this process of uninstallation of the patch KB 3002567 ......since this patch has to be uninstalled in pending DC's?
    Any help is greatly appreciated
    Thanks & Regards S.Swaminathan Live & let others live!!!

    In my own environment, I found the following registry value to be helpful:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters:RequireSecureNegotiate=2
    (DWORD)
    http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • Windows file server installation

    i have a 2k3 file server installed and connected to the mac pro with 3 users 2 of them are able to be accesed from the fileserver but one user is not able to access
    all the 3 users are able to connect to the machine without any prob

    Glad to hear the issue has been resolved.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for