Mountain? Leopard? I don´t know...
Hi,
since years I have a mac book pro 4 GB 1067 Mhz DDR3. No problems, all is chilly.
Now I want to update my Mac OS X Version 10.5.8, mainly because of firefox. Which product do I have to buy at apple shop?
I want to have the best result, if possible without between steps - easy results, that what I wish...
I only use my mac for private.
Greetings from Germany!
Daniela
Daniela91522 wrote:
Which product do I have to buy at apple shop?
You'll need to clone your present 10.5 configuration to a external drive using Carbon Copy Cloner, then move your users files to a external storage drive (not TimeMachine), disconnect any drives, then perform the 10.6.3 upgrade + software update using the white retail disk from Apple.
Hoping all goes well, you should be fine and can return your users files from the storage drive.
If not you hold option key and boot off the 10.5 clone, then figure out what to do next to fix your machine.
I don't advise 10.5 era machines be upgraded past 10.6.8. it's just too expensive in replacing software (no PPC apps!) and 10.7-10.8 will slow down your machine drastically and require 4GB of RAM or more.
Firefox is supported on 10.6.8, as well as Flash etc.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok
Similar Messages
-
I have a makbook pro, running with Leopard (10.5.8). I know that I missed both Lion and Snow Leopard and want to know the best way to upgrade. Do I need to buy both in addition to Mountain Lion? Will my computer even run Mountain Lion? I need step by step instructions because everyone I talk to just says "Just upgrade it" Thanks.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I have an older MacBook Pro Core Duo, I don't know if it is uprgradeable to OS X Mountain lion is it possible to tell via the S/n??? I'm already at Snow Leo. 10.6.8. I'd like to be able to completely bypass OS X Lion. Any one have any input that might shed light on my situation? Thanks in advance for your input.
Your MacBook can not be upgraded to Lion or Mountain Lion. Snow Leopard is the highest possible for that model.
-
I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes so I am unable to use computer at all.
Please confirm exactly what Mac this is, and what 'recent update' you installed.
-
Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?
HI GalaxieMusique,
I'm french too, but I'm going to write this post in english so that everyone may understand it
I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
In regards with quicktime, you can download QuickTime 7 here:
http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
Sorry for the english, we french people can make mistakes sometimes
If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess.... -
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I want to update my iMac to OS x 10.7 from 10.6.8 and I don't know if Snow Leopard is installed on my iMac. I don't know how to look in the hard drive to find out. How am I notified when anyone posts an advice?
Once you purchase and download Lion you may want to do the following before installing:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion. -
I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphonThis is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy -
I just got a macbook pro as a gift and i wanted to upgrade to mountain lion for free but i don't know where the laptop was brought? can anyone help me?
No one here would have any information as to where the MacBook Pro was purchased.
Contact the person who gifted the Mac.
Apple - See if you qualify for a free OS X Mountain Lion upgrade. -
How come I cannot download Minecraft? it says: Minecraft 1 is damaged and can't be opened, move to trash. I don't know but, I think it is because I have Mountain Lion. Please help me.
Make certain you have updated to the absolute latest Java from the official Java site, then try the download again.
YESTERDAY, 2 Feb 2013, new version of Java 7 was released by Oracle.
If you are running 10.7 or later get it ONLY from here, NOT from third parties:
http://www.java.com/en/download/index.jsp -
Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?
If it is plugged into a USB hub (or the spare keyboard port), try connecting it to a direct USB port.
Also, try doing this Reset procedure, while it is connect to power.
http://support.apple.com/kb/HT1320
NOTE: A new iPod nano is 6th gen. -
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
VIRUS in my Mac BOOK .. When I bought my mac book 6 months ago, everything was perfect.. but then when I open some webpage..it comes a lot of ads or pages unsafe .. that before it didn't appear.. I don't know if have to download a anti virus program.HELP
Not a virus, but it is malware: The Safe Mac » Search Results » adware removal.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
Hi, I have been trying to update many things on my 2009 white macbook. Everytime I do it tells me I need a different version. I don't know what versions I need or even where to begin or if I need to purchase new hardware? It says my version is 10.5.8. I have tried downloading 10.6 but not sure what to do. Everyone else seems to be updating there's and mine is way behind however it still tells me I have no software updates...Any suggestions?
You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was based on Power PC code and was written to be able to run on both Power PC and Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture. -
I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is still $29. You must have at least a model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
I want to update my OS from X10.6.8 to the next level but I don't know what that is. Can someone tell me the next version to us? Thanks.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Maybe you are looking for
-
Hi, im getting a strange output on parts 3 and 4 of my program, they are the same, when they should be different. Here is the output: Laboratory 3 written by me.. Frog: Position = 6, hops = 100, max position = 11, min position = -1, number home = 8 -
-
Upgrade Snow Leopard 10.6.2 to Snow Leopard Server 10.6
Hi, I'm trying to upgrade one existing Mac with SL (10.6.2) to SLServer. SLS was bought 2 months ago and I guess it's still the original 10.6. When I try to install it over the updated Snow Leopard it will fail with an error indicating that it is an
-
Prolong backlit time display in iPod Classic
Gentlefolk; The display on my iPod Classic defaults to current time and battery status. Perfect. But, to see the time, when I touch a control, the backlight comes on, then the song title displays, when all I really want to do is see the time. Is ther
-
We got stuck with an oracle ADF error in eclipse, but there is no support, just tell us is this a bug or we have to change the technology : Oracle ADF EAR 11.1.1 requires EAR 5.0 ?? Thanks
-
How to import ear files into nwds
Hi, i have some ear files how can i import then into NWDS. Thanks shikore Edited by: kishore shikore on Feb 10, 2010 5:18 AM