Mountain Lion 10.8 Server 2.21 Postgresql don't start

I hope someone can help.
I want to use native postgresql server. but I can not start the service!
sh-3.2 # serveradmin stop postgres
postgres: state = "STOPPED"
sh-3.2 # serveradmin start postgres
postgres: error = "CANNOT_START_SERVICE_TIMEOUT_ERR"
postgres: dataDirHasBeenInitialized = yes
postgres: PG_VERSION = "9.2.1"
postgres: datadir = "/ Library / Server / PostgreSQL / Date"
postgres: postgresIsResponding = no
postgres: dataDirIsDirectory = yes
postgres: PGserverVersion = 0
postgres: dataDirExists = yes
postgres: setStateVersion = 1
postgres: state = "RUNNING"
NEW DIRECTORY postgresql lion server
/Libray/Server/PostgreSQL For Server Services/
any idea? tnx ..

start postgres service failed: Apple Support Communities
postgres_server not running properly...: Apple Support Communities

Similar Messages

My computer does not start download osx mountain lion what should I do, My computer does not start download osx mountain lion what should I do

My computer does not start download osx mountain lion what should I do, My computer does not start download osx mountain lion what should I do

What's installed on your computer? If you don't have Snow Leopard 10.6.6 or later then you cannot get Lion. If you already have Lion installed then you cannot re-download from the App Store until you have reinstalled Snow Leopard.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT4569 In case of lost internet connection during mountain lion download from app store, do i have to start over?

In case of lost internet connection during mountain lion download from app store, do i have to start over?

How do I speed this up. I have a fast internet connection but this is obviously not right.
The speed of the downlaod is dependant on the speed of your Internet connection. "I have a fast Internet connection...," doesn't actually mean anything unless you provide some numbers.
I have a cable Internet connection with 32 Mbps download speeds, but if you have DSL, you would probably be limited to 1.5 Mbps. Some would call both of these connections "fast," but obviously one is faster than the other.
What is the speed of your Internet connection?? Don't say, "fast."
Test it here: http://www.dslreports.com/speedtest?flash=1

I brought a macbook air 11 inch mid 2013 since i have updated mountain lion it shuts down automatically I have done SMC reset still I have the same issue... any suggestions??/

I brought a macbook air 11 inch mid 2013 since i have updated mountain lion it shuts down automatically I have done SMC reset still I have the same issue... any suggestions??/

the thing is that when i did the clean install they did check with a hardware test first and nothing was wrong, i guess it was a false-positive, is there anything in the kernel report from which i can say it's either hardware or software related

Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up

I would like to have your kind support..Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up.

My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
Next, run Disk Utility and ask it to repair the hard drive.

I have install mountain lion with my gift card, but i don''t

i have install mountain lion with my gift card, but i don''t

It would be easier to just fix whatever is making your machine slow.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

My Mountain lion download paused, how do I get it to start again?

My Mountain lion download paused, how do I get it to start again?

Go to App Store > Purchases and select Resume button next to Mountain Lion. Had the same problem and just fixed it moments ago with the help of (mende1)

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Mountain Lion - Connect FTP Server

I have never been able to connect Finder to my FTP server since upgrading to Mountain Lion. I can connect with Firezilla, other FTP apps and Console but when attempting to connect in Finder (GO > Connect to Server), the connect attempt window just spins and eventually shakes it's head like a bad password, which works with other FTP apps. How is everyone mounting FTP sites in Finder? Not?

Hello,
I have yet to setup this up but it does not make any sense to me as to why the admin would have to login to the local computer to get updated. This defeats the whole point in my opinion. You can try giving the network user admin rights of the computer and see if it works.
1. Login as the network user.
2. Open System preferences and go to users and groups.
3. Check the box "Allow user to administer this computer"
You may have to restart and then test it to see.
The only other thing I can think of trying on the local side is joining the computer to server if you already have not done this.
Thanks,
ebrind

Create a bootable Mountain Lion OS X Server installer ?

With Lion and Lion Server it was possible to create a Lion Server installer just bij adding a ServerVersion.plist file in the folder CoreServices.
Adding that enabled the normally greyed-out 'Customize'-button that installed the Server.app and ServerEssentails.pkg (nevertheless an internet connection was still required).
I don't go in details here too much but is a similar procedure possible for Mountain Lion ? To install OS X Server in one row ?

Not that I am aware of. If you find a way please disclose.
I fear that this is no longer possible and the reason I say this is that we have already gotten a few BTO mini Servers arriving with Mountain Lion + Server.app installed. However, if you erase the drive and perform and Internet restore you no longer get Mountain Lion + Server.app installed. You get Mountain Lion and then need to go to the App Store, associate the device with an Apple ID which grants you access to Server.app for download.

After installing Mountain Lion, why screen server does not detect photos from iPhoto?

After installing Mountain Lion, why the screen server does not detect photos from iPhoto?

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
1) After starting up, I get the usual gray screen with Apple logo.
2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
3) I follow this instruction, but get the same dialogue box over and over agin.
Any ideas?
Thanks and best wishes.

If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Ever since I downloaded OS X Mountain Lion I get and error message that says my start up disk is full.

I downloaded Mountain Lion about a week or so ago. Ever since then I have constantlly been getting this very annyoing message saying:
"Your Mac OS X startup disk has no more space available for application memory"
And makes me force quit safari, mail, and anythin else I have open. If you guys are having the same issue please let me know. Also if you know any way to get rid of this stupid thing please help me!
Thank you!

Your hard drive is too full. You need to delete some stuff. You should have at least around 10% of the total hard drive capacity free.
See Where did my Disk Space go?

If I upgrade to mountain lion can I uninstall it if I don't like it

If I upgrade from Lion to Mountain Lion and I don't like Mountain Lion, can I uninstall Mountain Lion and be asured that my IOS Lion will function and be ok?

You can't uninstall an OS. You can only erase and re-install the previous OS. You would also need a backup of your previous data.

Mountain Lion 10.8 Server 2.21 Postgresql don't start

Similar Messages

Maybe you are looking for