Mountain Lion and AirPlay Mirroring
Mountain Lion not detecting my Apple TV on the same network, the AirPlay Mirroring menu item does not appear in the menu bar.
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Does your iMac meet the above requirement?
Hope this helps
Similar Messages
-
Does mountain lion support airplay mirroring
I am trying to get netflix on apple TV and have had 2 stories aout airplay. 1 is you cannot use airplay from the imac outside the itune app if you have a core dual processor? Secondly you need mountain lion to use airplay outside of itunes. Reason being I am trying to get netflix onto the big screen using apple tv and am in an area netflix is not in yet. Before i go to mountain lion from snow leopard i wanted to ensure i could do it on the imac i have. otherwise the choice is a cable or a new imac!!!
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer. -
Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen.
Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%& !!!!
Back again to mini display to hdmi cable.
could you help me????It is stated that mirroring requires recent hardware (2011 or later)
http://support.apple.com/kb/ht5404
However you can still use 3rd party solutions like Airparrot which do it via software -
I purchased Apple TV yesterday strictly to mirror my desktop to my TV. Now I find out my desktop is not supported? How can I mirror my iMac to my Apple TV? I am running Mountain Lion and the iMac is a 2.8 GHz with intel core 2 duo from early 2008.
Thanks for your help!You cannot officially do this Apple's way as they do not support your computer for Airplay.
There is a software solution called Airparrot that you may want to demo:
http://airparrot.com
Some people are pleased with it othes not so much.
AC -
Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?
How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.
-
I am thinking of upgrading my Macbook pro software to Mountain lion, and I just wanted to know if the airplay function is really all its cracked up to be?
For example can I stream videos from VLC to my apple tv?
Thanks team!!
RYour question asked.....
Can either of these three connect to the existing router (which is not an Apple router and cannot be changed) wireless?
So we understood that you wanted to connect to the existing router using wireless.
If you can run an Ethernet cable from one of the LAN <-> ports on your existing router to the other house, then you could connect one of the Apple routers that way.
Compare the Apple routers here to find one that might meet your requirements:
http://www.apple.com/compare-wifi-models/ -
I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??
stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.
-
I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?
http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards. -
I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP
Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office. -
Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.
Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X. -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
I just have just downloaded Mountain lion and I wanted to listen to music on my computer screen with my HDMI cable plug into my back of my screen and I wanted to talk to dictation on my regular standard iPhone headphone and I was wondering if it's all possible change your settings Mac Mini to set it so you can listen to those both like your headphones and use the mic in your headphones and there's no settings that would change in the Mac Mini so do there is a flaw in this system or I am just really really really really dumb.
You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
I upgraded to Mountain Lion and now I can't use any of my software!
What a disaster and huge mistake. Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs. I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work! I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me. I never used Time Machine. Is there any way on earth I can revert back to my old operating software??? Please help. And if you haven't upgraded yet and are thinking about it. BEWARE - and don't do it. I've been reading that Mountain Lion isn't working with Microsoft applications either. Omy...I haven't even checked that.
and of course no one at Apple support can or will help melunaulu wrote:
It's not my Microsoft that I use much or am worried about. I can't run AutoCAD. and I can't update AutoCAD either. When I try to mount an update just to get it working, it says it can't run the DMG file. Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads. ***? and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***?
So basically I can't use ANY of the programs I ran before. And yes I have googled desperately all day. Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did. And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it! It's a complete disaster and I don't have the money or time to purchase and or reinstall everything. I am just screwed.
No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
And please .... Start Backing Things Up, you could lose it all without one, work included.
Maybe you are looking for
-
Entering special language characters in JSF
I am using JDeveloper 10.1.3.3 to develop a JSF/ADF application. My database is using the AL32UTF8 character set. If the following is entered into an af:inputText field.... Podmiotowi w 2 okresie leczenia proszę ... when the record is saved it change
-
I am new to form building and have been working on an interactive form to submit OR Surgical booking requests from the physician offices to the surgical scheduling office. I have run into a few roadblocks and have not found my answers on the help men
-
Losing video in Premiere Elements 10
I have been using a trial version of Premiere Elements 9 and decided to go ahead and purchase version 10. The installation went smoothly, and I activated with my serial number. My problem is that I'm getting sound but no video - the video pane is b
-
Hi Quick question. The javadocs isnt clear on this: This is "getClip()" from "AudioSystem" getClip public static Clip getClip() throws LineUnavailableException Obtains a clip that can be used for playing back an audio file or an a
-
LOCK_SGA stop restarting database
Hi, Yesterday I had LOCK_SGA in memory but when I restart the database it doesn't restart when I am trying to start manually(by sql prompt) it say's "ORACLE SHARED REALM MEMORY ALREADY EXIST" when I am checking detail of this error it says "start new