Mountain Lion and external monitor

Hi, Im running my MBP with a external EIZO monitor with 1600 x 1200. Before I upgraded to ML this worked just fine. But when i upgraded to ML my external monitor wont show the resulution properly. "1600x1200" is selected but the screen is still squeezed with black bars over and under it.

May also want to upgrade to 10.8.2 as well. One of the focus areas on that upgrade was graphics.

Similar Messages

I upgraded my imac to OS Mountain Lion and now the Seagate Goflex external HDD is not recognised

I upgraded the iMac to Mountain Lion and it does not recognize the Seagate Goflex External HDD that I was working from earlier. I do not want to buy a special program since the Goflex HDD was working on both mac and Windows without any problems before the upgrade. The Goflex HDD is still working on my Macbook pro so there is no problem in the HDD. Is there something that needs to be activated... Please help

A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc. It was an all or nothing deal. But selecting all would cause the error.
So I had read the other forum posts about the "&" symbol being the cause of the problem. I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference. I found one album with the "&". I edited that one. Still would not work. So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild. Finally we created a whole new library and reimported my master photos from my original one. Using this option would allow me to now check off that radio button in iTunes. BUT... I now lost all of my albums and events and would need to rebuid them. I was not happy. They agreed and we set up time to talk this week.
So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
Quality control is not up to par with Apple these days.

I downloaded mountain lion and my audio does not work

I Downloaded mountain lion and my audio input does not work. I am tryig to use it with Articulate.
I rebooted twice, I ahve taken out the external mic
I have looked in Utilities and see if the setting are muted but all ok
I have looked in Activity monitor
Please help
Brett

Take each of the following steps that you haven't already tried.
1. If anything is plugged into the audio-out (headphone) port, unplug it.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. You may need to darken the room for this step. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

I think I finished installing Mountain Lion, and am at the "log in" page with my name and the Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro

I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I loaded mountain lion and now my computer can't handle video or load iTunes

I loaded mountain lion and now my computer can't handle video or load itunes

4 GB ram
2.4 GH processor
I have 3 topics in the activity monitor running at 9995 Mb real memory
loginwindow = 952 mb
systemUIServer = 950 mb
usereventagent = 940mb
has mountain lion just ate up my ram in operations

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5. I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files. Is there a known procedure to do this? Any tips or feedback?

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5.
I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files.
Is there a known procedure to do this? Any tips or feedback?

1. Make a backup, open App Store and purchase Mountain Lion. When its download finishes, close the installer and open Lion Diskmaker to create a bootable USB drive with Mountain Lion.
2. Press Option key while your Mac is starting, select the external drive and open Disk Utility.
3. Select Macintosh HD in the sidebar and erase the drive.
4. Close the window and install Mountain Lion

HT4889 Used migration assistant to move from Lion to Mountain Lion and an entire user account did not move over.

The user name (account) was the same on the source and the new computer. Is this why the data could not move over? I did not see this user account in the list of users presented by migration assistant. Thought it was default so that is why it wasn't shown. I can move the data over manually, but this was a surprise. Any feedback on why this happened?

I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs.

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process.

I upgraded to Mountain Lion and now my computer keeps freezing. How to fix?

I upgraded to Mountain Lion and nowmy computer keeps freezing. How do I fix this?

I know you have 10.8.4. I'm asking you to download and install a Combo updater. This is not the same updater used through the App Store when you simply upgraded from 10.8.3. And, before you do that I suggest you do this:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

If you've installed the Mac OS X Mountain Lion and want to restore your MacBook to factory settings, what do you do?

Havinig a lot of problems with my MacBook since I've upgraded to the Mac OS X Mountain Lion program. Can someone tell me if it's possible to reset my computer back to factory settings?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

I've upgraded to mountain lion and now cannot use microsoft office--what happened?

I've upgraded to ox Mountain Lion and now cannot use any of my Microsoft office software. What happened?

It appears that you upgraded your computer to Mountain Lion and were using Microsoft Office 2004. In the short term, if you need to open and modify Word files, go to the file in the Finder and Control-Click on it. A menu will come up: go to Open With... and select TextEdit. This should allow you to open, modify and save the file for the short term.
You can do the same trick to open Microsoft Excel files in Preview and print them; but I do not think you can modify them in this way.
Workarounds for Microsoft Office 2004 since upgrading to Mountain Lion:
1. Upgrade to Microsoft Office 2011. This version works in Mountain Lion. However some of your legacy 2004 files may convert badly.
2. Restore the version of OS X that you were using before Mountain Lion.
3. Partition your hard drive and/or attach an external hard drive and install Snow Leopard on it and use the 'dual-boot' method of booting into Mountain Lion when you need it and booting into Snow Leopard when you need to run your PowerPC applications such as Microsoft Office 2004.
4. The method I use, which allows me to run my PowerPC applications concurrently with Lion: I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Looking to move data from OSX 9 to Mountain Lion using external hard drive?

Looking to move data from OSX 9 to Mountain Lion using external hard drive?

Thanks. I'd like to get rid of this OSX 9 after retrieving a few files. If I wanted to erase it's hard drive before I do so, would powering off then on again and immediately start tapping the F10 button do the trick as it does with a PC?

Mountain Lion and Lion very slow on Macbook 13' 2010 Middle

The problem is the Mountain Lion and Lion very very slow, but Snow Leopard was fast.
The Lion bit faster, the Mountain Lion is much slower.
Animations are choppy and slow, but sometimes fast, but mostly random stuttering. If i have multiple windows opened, the Misson Control is very slow and useless. I think the system UI framerate is low (about 10-15 FPS)
Overall, the system response is very slow, and lagging.
I tried to clean dinstall several times, but this didn't help me.
I know that the new system is slower on older machines, but it would not be so necessary. This Machine is good machine, and i think this is enought for Mountain Lion. Will Apple fix this slow issue soon (maybe 10.8.3), or stay in this state?
At current state of the system is unusable due to the slowness.
Or is it a non official solution to fix this?
Thanks for your answers.

How much RAM do you have installed? 4 GB RAM is generally recommended as a reasonable minimum since kernel_task (part of system) consumes up to 1 GB; my browser consumes another 500 MB or so. So, if you like to multi-task and have several things open, then you will need to increase your RAM. This problem will not be fixed; I sent in a bug report and the reply was that this is how it is intended - 64 bit addressing consumes far more resources than 32 bit (Snow Leopard).
You'll need to look at your processes in Activity Monitor, quit some apps while working on others that are CPU intensive, and increase the RAM if possible.

I download OSX mountain Lion and my mac is very slow.Any idea why?

After downloading mountain lion my mac gets slow...any idea why?

Try this:
Boot into Safe Mode then reboot normally. Do the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Does this help? If not, then you should reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Recently purchased Mountain Lion and now 40% of my Big Fish games don't work, any ideas?

Recently purchased Mountain Lion and now several of my Big Fish games don't work, any ideas?
Mystery Case Files Return to Ravenhurst and MCF 13th Skull to name a couple
I have contacted Big Fish games and tried all the suggestion still to no avail.....

If you "recently purchased Mavericks" without upgraded your hardware (MBP), then your MBP is still capable of running whichever flavor of OS X that you previously were able to run these 40% of Big Fish games.
In that case, partition your hard drive or add an external drive and install that flavor of OS X (Snow Leopard or Lion) there and "dual-boot" your MBP into the alternative OS X when you want to play those games using Startup Manager in the System Preferences before Restart.

Mountain Lion and external monitor

Similar Messages

Maybe you are looking for