Mountain Lion - Cannot download additional components???

My MacPRO (2008) was running like clock work, but recently a gremlin has appeared. I have been on this forum before and so far all information has been really useful. The mac would start up and shutdown in one motion. I didn't even have enough time to bypass or boot from an alternate drive so it was off to the mac centre to find the cause. Weirdly enough they found nothing wrong and it was good to go. I decided this might be an opportunity to rebuild from scratch and so my 4 drives I zeroed the data and tried to reload Mac OSX 10.8. It starts all well and good before stopping after a few minutes and flagging a problem "cannot download additional components". What is causing this and how do i get around the problem. I would take it back to service centre but have lost confidence in there competency since everytime I take it there it comes out worse than it went in.

Did you get to the point where you have downloaded the entire package from AppStore?
Save the ESD package and prepare an install disk and do a clean install.
Usually - there was one person recently here but cannot find buried in a thread, they had 10.8.2 and the installer is 10.8.3.
What are you running now?
As for the original problem, for which no problem was found... are you using an SSD to boot the system?
How to do clean install of Mountain is same as was for Lion, with how to clone a system.
Make sure you have 8GB flash drive, or even a small (16-32GB) partition (yes, you can setup an installer to run from hard disk drives to do a clean install to another drive or partition).
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
http://support.apple.com/kb/HT4718
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
Worse case and probably the easiest is to reload a clean OS
PS: CNET links are down, even cnet.com won't load.

Similar Messages

  • When reinstalling os x, why do I get a message saying it cannot download additional components?

    My MacBook Pro recently began acting weird. The Application window kept closing on its own. I couldn't launch several applications. I could no longer access my e-mail from my mac and everything is taking much longer than normal to load. I ran MacKeeper, but it found nothing unusual. I then went to the Disk Utility and tried the repair option. It also found nothing unusual. After that, I erased a partition and attempted to reinstall Mac OS X. Each time I tried, it began downloading but eventually said that it was unable to download additional components needed to reinstall OS X. Any idea why?
    Any support and/or suggestions as to how I can fix this would be GREATLY appreciated!
    Thanks...  

    EDIT:
    After posting I see this question has the tag of "windows". I don't know if this applies to the Windows version or not.
    The only time I see this message is if I download something, trash it, AND empty the trash. If I don't empty the trash, it finds it there. It will find it wherever I move it to, unless it is was in the trash and emptied.
    Using Finder, is the downloaded file in your Downloads folder?
    Maybe if you go to Safari/Preferences/General and change the location for downloads to something else then change it back to Downloads it might correct it.

  • Apple mail in mountain lion cannot download many attachment (corrupt)

    I have the same problem on all my macs, and also my friends. That includes:
    - MacBook Pro 17"
    - MacBook Pro 13"
    - MacBook 13"
    The problem is that almost every email attachment is corrupt. It means it can in most cases not be opened, except for photos and then they just show some grey area where it's not loaded.
    - that all attachment can perfectly be opened on all my iOS devices. 2x iPhone 4, 1x iPad1, 1x iPad2, ipad4, 2x iPhone5
    - the problem accures with many files types, but PDF, excel, png, jpg, doc, igs are some I have tried.
    I think the problem comes from slow or irregular internet speed. Obviously that should not be an issue and isnt with any other mail program.
    This problem is so bad that I'm thinking of switching the mail app as its basically useless. I tried thunderbird and all attachments were loading properly. But it had other issues.
    I found a solution that works around this to at least work. Its still not solving it, but at LEAST i can get the mails attachments and work with them, rather than having to forward the mail from my iphone.
    http://www.macobserver.com/tmo/answers/how_to_fix_corrupted_imap_attachments_in_ apple_mail/
    Basically 2 solutions: I prefer option 2, as it can be done fast and each time the issue happens.
    1) click the mailbox that has the issues
    go to Mailbox in the status and click "Rebuild"
    This will re-download all mails. its a bit overkill, but it works.
    I've tried this and it also does not download the mails correct. In the end it just shuffles which mails are loaded this time.
    2) create a new mailbox inside the main IMAP mailbox account
    move or copy the message with the broken attachment there
    now do option 1) only for this mailbox
    then move the repaired message back.
    Same this still not guarantee the attachment.
    Such a stupid issue!!!!!

    Dear All,
    its driving me mental!!! Its now almost every mail attachment that does not load correct! there must be something that can be done.
    I also am not the only one.
    Please help.
    Martin

  • Downloading additional components for fresh reinstall of lion but does not restart when done

    i've attempted to reinstall a fresh copy of lion because ever since i had lion, my dmg files wont open, software would not update and many other problems. So i tried reinstall and i waited hours for them to download additional components. the bar is completely blue (completed) but it would not restart. do i restart it manually?

    Manually shut it down.
    I would then first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these  procedures don't solve the problems.
    Hope this helps

  • Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hi
    Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
    The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
    A reinstall should leave all your own personal data and programs in place.
    Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
    Message was edited by: softwater

  • Downloading Additional Components

    Folks trying to install Mountain Lion and encountering a screen saying "Downloading Additional Components..." , be aware that this is often a RAM problem. What has happened is that the installer cannot locate the AppStore version and has fallen back to hard-coded and is looking to Apple servers to provide install data. I don't fully understand why faulty RAM causes this, but it's almost always the villian. The solution is simple, albeit a pain in the neck. Temporarily replace the factory RAM into your computer, finish the install, then upgrade the RAM again keeping in mind that you'd probably be better off buying new RAM, particularly if you have been experiencing kernel panics or components crashing (such as Silverlight while watching Netflix). Hope this helps !!!

    Maybe you created a bootable disk of Recovery instead of Mountain Lion, so it will download OS X instead of installing it from the USB disk. To create a bootable OS X disk, open App Store > Purchases, download Mountain Lion and install Lion Diskmaker > http://blog.gete.net/lion-diskmaker-us/

  • Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?, Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?

    After an hour or two of the installation process, with reamining time registering only 7 minutes, a box appears on screen with the message:
    "Can't download additional components needed to installl OS X". I can't get beyond that poiint.  I had not trouble installing Lion yesterday, but three attempts to install Mountain Lion hand up at this same point.  What can I do about it?  (I'm installing to a Mac Mini that I bought in 2012. I have 110 GB free out of 249.67GB.  I have VMWare Fusion installed and that allocates 69.55 to Windows.)

    Try resetting the App Store.
    App Store Reset       Learned from Old Toad

  • Why does "downloading additional components" take 36 hours?

    Hi there,
    I'm about to go on the road for 6 weeks so am trying to install Mavericks onto a USB stick so I can have a bootable drive with a bunch of trouble shooting tools installed.
    But when I try to install Mavericks (restart then Command R) the stage "Downloading additional components" says it will take 36 hours. I tried restarting the process and doing a clean erase of the drive using the installer's Disk Utility and this has dropped it to 8 hours but over the past 20mins it's climbed to 14 hours?
    Frankly, I don't understand why I can't just use the 5gb Mavericks installer I've already downloaded - but I can't because the installer states Mavericks can't be installed on this Machine (I think because it's already installed).
    Does anyone know how to install the OS onto a disk quickly? I really don't understand all these new restrictions.
    Any pointers in the right direction would be much appreciated.
    Cheers
    Ben

    prik67 wrote:
    i formatted the Hard Drive from Disk Utility in order to Re-install OSX Lion...The download time first shown was like 53 hours and then after like 10 minutes it went down to 10 hours...i am pretty sure thst the internet connection i have is very fast, so why does downloading OSX Lion take so long?
    It's about 4GB, from memory, and the download speed can be affected from things like site traffic or variations in speed from your own ISP. But in general, it IS a very large download. Also never put your trust in a computer telling you how much time is left to download. As you can see, it recalculates everything more often and more quickly than the Tax Department! (Oh, and don't watch it. You know the old saying)
    Cheers
    Pete

  • Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

    Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
    iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

    Hello jst84,
    The following article may be helpful in getting your purchase to complete.
    Mac App Store: "An unknown error occurred (100)" when purchasing
    http://support.apple.com/kb/TS3637
    Cheers,
    Allen

  • Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?

    Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?
    Context is that my other computers are not mobile and I do not have broadband worth troubling for a 4GB download - so will go to Apple Store with MacBook Pro for first download.

    The easiest way is to download the installer but do not open it.
    Next, make a copy of it and store it where it won't get lost.
    Then take one of the copies and place into the applications directory and open it to begin the installer.
    This has saved me the trouble of ever having to download the installer twice, plus you can mess around with the installer and try different options without having to worry about not having a clean install file if needed.
    Best wishes

  • Its about 6h that osx mountain lion is downloading why?

    hi,
    Its about 6h that osx mountain lion is downloading with out any progress.Can U tell me Y?What if i shot down or lose my connection?

    Go to the Purchases Tab in App Store and make sure it is not Paused. If it is, click on Resume.

  • Mountain Lion is downloading, how can I tell where it is downloading to and how much has downloaded?

    Mountain Lion is downloading, how can I tell where it is downloading to and how much has downloaded?

    In the "purchases" tab in the App Store you'll see a progress report. 
    Also once it completes downloading the installer will auto-launch.
    Once you get Mountain Lion installed, if you have the Downloads folder in your dock you will get a progress indicator in the dock while it's downloading :-)

  • Mountain lion stopped downloading/intalling after 53mb

    Mountain lion stopped downloading after 53mb, just shows "53.25 MB of 4.34 GB - Calculating..." in purchases in the app store
    tried pausing and starting again as well as restarting the computer and the app store, when you restart the computer app starts downloading from the beginning but stops again in the same place, does not download any further than before :/
    Please Help!

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • If I pause the download of Mountain lion the download resumes from the beginning...how can I resume the download from where I have paused?

    f I pause the download of Mountain lion the download resumes from the beginning...how can I resume the download from where I have paused? can anyone please help??

    Thanks for your prompt reply...but is there no solution to it...since the file download is almost 4.34gb..its a long download..internet is bound to go down for a while in such a long download..and whenever the net goes down for a minute or two I pause the download and restart..but everytime I restart it starts from the beginning...i believe for the earlier version i.e. Lion pause function was enabled and download used to begin from I have paused...I then successfully downloaded lion on the same internet network I now use at my home..Please help if you can or ne1 can..Many Thanks!!!

  • HT202159 Mountain Lion upgrade download stopped, now it states in purchased apps that 'an error has occured' and resume button is blank & will not work

    Mountain Lion upgrade download stopped, now it states in purchased apps that 'an error has occured' and resume button is blank & will not work. Tried to re download, but it states code has already been used

    Danielle...
    From the App Store menu bar top of your screen click Store > Check for Unfinished Downloads
    If that doesn't help, disable anti virus software and turn off the Firewall in System Preferences > Security & Privacy.
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband (high speed internet) access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

Maybe you are looking for

  • First flexunit test is always failing with Error Error #1009: Cannot access a property or method of

    Hi, I have flexunit project which I am trying to run on linux server. 1. I have Tests project. 2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone fla

  • Inserting Fillable forms into PDFs converted from word

    I need some help with inserting a fillable form I created in Live Cycle.  When I go to insert the form into a file that was originally created in word and saved as a PDF,I receive a message (see below) I need to be able to find a way to insert the fi

  • DECODE query help

    SELECT * FROM MYTABLE IS: DOC_ID          STATUS  PKG     NOS     AMOUNT IN1439324     GEN     BX     5     513 IN1439324     GEN     CT     2     756 IN1439324     EXP     BX     1     770 IN1439324     EXP     CT     1     1134 IN1439999     GEN   

  • Unable to see partition?

    I stopped the partition in the middle. I rebooted and repaired the disk, it was okay. I am unable to see the partition but it takes space. How do I remove it? Please help...

  • Installing Oracle EBS 11i (11.5.10.2) on Redhat 5.1 - 64 bit

    Hi DBAs, Is it possible that I can install theOracle 11i (11.5.10.2) on Redhat 5.1 kernal 2.6.18.12x 64 Bit in single instance mode? If so , can you provide me the list of required RPMs or any metalink reference note. I am following the Note ID 28745