Mountain Lion cannot reboot after I used windows 7 with bootcamp
I go to bootcamp partition and run windows 7 without any problems.
Then I restart and try to use Mountain Lion on an encrypted partition. It keeps rebooting.
Then I keep trying until I can go back to mountain lion. I don't know what I do that makes it work. I keep shuting it down and trying again, safe mode whatever.
Once I finally get Mountain Lion to start, it appers to be working perfectly.
The error when I can finally use mountain lion again is this:
Interval Since Last Panic Report: 214700 sec
Panics Since Last Report: 2
Anonymous UUID: 0DB82237-2402-D8D5-1417-B0952197DE8E
Mon Dec 24 12:43:41 2012
panic(cpu 0 caller 0xffffff80130b7bd5): Kernel trap at 0xffffff801302e906, type 12=stack bounds, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8085a1e000, CR3: 0x0000000015d48000, CR4: 0x0000000000000660
RAX: 0x36583b85c59a0096, RBX: 0xffffff801e1b6000, RCX: 0x0000000009000000, RDX: 0xffffff807f9b8078
RSP: 0xffffff808b1dbe40, RBP: 0x01ffff808b1dbeb0, RSI: 0xffffff807f9b8068, RDI: 0x0000000000000000
R8: 0xffffff80136bec60, R9: 0x0000000000000000, R10: 0xffffff801e0422b0, R11: 0xffffff801367de88
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff801e1b8000, R15: 0x0000000000000000
RFL: 0x0000000000010046, RIP: 0xffffff801302e906, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff8085a1e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808b1dbae0 : 0xffffff801301d626
0xffffff808b1dbb50 : 0xffffff80130b7bd5
0xffffff808b1dbd20 : 0xffffff80130ce4ed
0xffffff808b1dbd40 : 0xffffff801302e906
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x1ffff808b1dbeb0
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000012e00000
Kernel text base: 0xffffff8013000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 1349189652
last loaded kext at 314691811: com.apple.driver.XsanFilter 404 (addr 0xffffff7f94d27000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2
You can install Windows in BootCamp (it will be a fresh installation) and you can remove the existing VM installation. Windows will run faster in Boot Camp than it will in a VM (parallels is a VM).
Please note that MacBook Pro's have 2 ram slots, and they will both be occupied with a 2G chip in a standard configuraton, there will be nowhere to install the other 4G that is in the mail. Return it and order 2 x 4G chips and remove the 2 x 2G chips already fitted.
Similar Messages
-
Overheating while using Windows XP with Bootcamp
Hi,
I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later.
I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overheating when using Windows on Bootcamp (especially on the left side of the keyboard). Until now, the system doesn't crash but the overheating is a big problem for typing. This problem does not appear while I work on Snow Leopard.
Please, I would appreciate any help. I installed "SMCFanControl" but it only works under OS X (where there is not the problem). It doesn't control the fan on Windows under Bootcamp. Also, for this, I installed "SpeedFan" but it doesn't recognize the fans.
Thanks in advance.A little solution that has helped me.
install both
Notebook Hardware Control (NHC)
http://www.pbus-167.com/nhc/nhc.htm#anchor_download
Notebook Hardware Control has a Max Battery setting when you right click on it's icon in the notification section on the task bar (lower right). Make sure to apply this setting.
and as suggested by Kappy
Input Remapper
http://www.softpedia.com/get/System/OS-Enhancements/Input-Remapper.shtml
This program allows you to adjust your fan speed without having to restart from Mac OS. Which is nice because with SMC if you close your macbook while running XP it will turn the fans off. Therefore you have to restart in Mac OS to turn the fan speeds back up.
The combination of the two has kept my cpu in the 65c range while heavy gaming and 45c at idle.
I have tried a lot of the ridiculous things that have been mentioned in both this thread and others. This solution has been an incredible relief because I certainly didn't want to get up every so often to run to the freezer or play over the air conditioner for several hours. I hope you have as much luck as I did.
My Mac is a late 2009 Macbook pro and I'm running XP in bootcamp.
Message was edited by: ensigne -
I've upgraded my internet to a shaw 250 Mbps plan. Using their speed test I'm getting over 200 Mbps on this mini, running windows 7 on bootcamp.
When running moutain lion, I'm getting exacty 100 mbps. solid, looks like it's being limited.
Network utility app shows link speed of 1Gbit/s zero errors or collisions.
Network is cable modem wired into airport extreme (5th generation), then wired to the mini; all cables cat6.
Is there something in Mountain Lion that limits the ethernet bandwidth to 100 Mbps?
And how do I turn it off so I can get the 200+ the hardware can clearly do?
Thanksoh, btw.
I get exactly the same max download speed of 100 (102.?) Mbit/s using wireless; which shows as a 450 Mbit/s link speed.
So I seem to have the same limit to all my network connections. -
Reboot failure from cancelling windows setup with bootcamp!
I tried to run bootcamp. During the setup process, there was an error message so I decided to quit the setup. Now my computer will not reboot correctly and I'm freaking out. Are there any key functions that I can use to reboot? All I see is a black screen with a blinking line that looks like the underscore...I am just switching from windows to mac, so this is all brand new to me
Ok NOW I was able to get my windows xp cd to eject. Now my computer is prompting me to install Leopard again? And when I get to the Select a Destination box, NOTHING appears/ Can someone help me please! I am so fed up with this thing!
-
After I installed OS X Mountain Lion system, I can't use my Safari to log into my online banking and some other websites which require passwords. Can some one please help?
It could be browser incompatibility or something else. When you say you can't log in, what happens? Is the bank website generating an error saying you're not using a supported browser? Does the login form for your bank account display as usual, but once you submit the form to log in it doesn't work? Give me a specific step-by-step of what you're doing, such as...
1. I load bankofamerica.com
2. I type in my login
3. When I submit, the page does nothing
Obviously that may not be your issue, but giving us details like that will help us come to a quicker conclusion. -
Mountain Lion - cannot copy and paste in finder
Hey,
I've only just noticed this today and I've done a search but can't find anything so far to help me. I upgraded from lion to mountain lion the day after it was released, not fresh install, upgrade. Basically... I cannot copy files using either cmd+c / cmd+v or using the finder edit->copy / edit-> paste menu. They aren't greyed out. Everytime I try I get the error "The operation can't be completed because you don't have permission to access some of the items.".
This will happen even with a newly created folder. I can delete files. I can create files. I can drag files in finder without issue but I cannot copy and paste. I'm guessing there are permission issues going on but I don't know where to start.
Repairing permissions didn't help (I kinda didn't think it would given it only works on system files but thought it worth a go).
This is an example of the file permissions assigned to a screen grab on my desktop:
-rw-r--r--@ 1 jackwestbrook staff
64257 1 May 19:48 Screen Shot 2012-05-01 at 19.48.27.png
Even if I blow it wide open with chmod 777 I still can't copy it...
-rwxrwxrwx@ 1 jackwestbrook staff
64257 1 May 19:48 Screen Shot 2012-05-01 at 19.48.27.png
These are the permissions assigned to my desktop:
drwxr--r--+ 19 jackwestbrook staff
646 19 Aug 18:24 Desktop
Can anyone offer me some advice on where to start with sorting out this issue?
Cheers,
JackHey, I was really loathed to try reinstalling the OS and something told me that I'd I can drag and drop but not copy and paste there had to be something interfering with the clipboard.
I disabled Alfred and its clipboard history feature (http://www.alfredapp.com/) and rebooted. Amazingly this fixed my issue. I'm going to email the author in the morning to give them a heads up about this.
Thanks to both of you for taking the time to offer me advice.
John Guo - nice tip, wasn't aware of that!
Ta,
J -
How do I get a copy of the Mountain Lion OS that I can use to recover?
How do I make a disc image of my Mac Mini HD that id bootable and has the operating system with all the programs, settings and data. If I need to replace a defective hard drive it would be good to have an image on a USB flash drive to restore previous settings and the operating system -- Mountain Lion, 10.8.1. I have been told that TimeMachine does not make a true disc image. I want a "hard copy" of the operating system that does not require an internet connection.
Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
Get yourself a spare hard drive freshly erased or with a freshly erased partition of around 8 GBs or more.
Boot to your Recovery HD. Select Reinstall Lion from the main menu.
From the beginning screen select your spare partition/drive as the target destination then begin the download.
At the end of the download you will observe an Install button for you to click. Now this is important - as soon as that gadget appears you must abort the installation process. There are only two reliable ways to do this quickly: a. yank the cable for the drive from the computer; b. pull the power on the computer - shut it down quickly.
This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process. -
Mountain Lion isn't letting me use the App Store, Can someone help me?
I thought that mountain lion will be a very useful software upgrade. After I downloaded Mountain Lion, I can't connect to the App Store and I can't turn dictation on. Can someone please help me?
I am having the same problem. There is a glitch with the app store, that non-admins cannot connect to the app store. Try using the admin account overwise i'm not sure on that one.
I have no clue for dictation is it all faded out? That is how mine is, it is probably just a problem with the new software and they will release an upadte for that but if the app store is not working how can we receive the new release?
You'd of thought that apple would of run tests or something to see what happens when you download mountian lion. If i find anything i will keep you informed. -
My Mountain Lion mac crashes after resuming from sleep
Hello
My Mountain Lion mac crashes after resuming from sleep every time I use it
It happens every time the mac resumes from sleep and it started like a week ago
I remember installing the new updates for flash? and xquartz and nothing else.
I have also had microsoft word installed on my mac for about 1 weeks before this problem started so might be related to that
Please share with me any tips on how to fix this because I am really annoyed of losing stuff after each time my mac resumes from sleepI have an iMac bought may -11, and it worked fine with Snow Leopard.
About a week ago I bought and installed Mountain Lion 10.8.2. Everything went fine, and all software worked ok. iPhoto had some problems, but after installing update the system prompted to do, it has worked ok.
The propblem occurs now and then, when computer is waked up from sleep. The Desktop occurs, but no software starts, not even System Tools untlil rebooting the computer. Of course, I can not reboot the computer from "Apple menu", but holding the power button down.
This is very embarassing! OsX Mountain Lion has turned out to be a very big disappointment. I installed id because of iCloud (i have a new iPad, too with iOs 6 installed).
Can anyone help me? Is there any other way to solve the problem than re-installing good old Snow Leopard?
I would not like to do that, I bought Mac because I was bored in re-installing and recovering!
Thank you -
I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded. -
I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.
I tried rebooting. It didn't change anything.
-
I cannot open the store (using Windows 7). Every time I try there is a blockpage.
I cannot open the store (using Windows 7). Every time I try there is a blockpage.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have just upgraded to mountain lion and now can not use iphoto how do I get to my photos?
iPhoto just has a no entry sign on it after up dating to mountain lion how do I now use iPhoto please?
Hi Anitra,
Did you updated from OSX Lion to Mountain Lion? And iPhoto was installed on your Mac? Then iPhoto and the Library must still be on your Mac.
Go to finder and slect 'Applications'. iPhoto must be in that folder. Open iPhoto. See what happens. Are all your pictures/events displayed?
If not, please reply and we will try to locate the iPhoto Library. -
HP Deskjet 1000 Printer - J110a cannot print in color using WIndows 8
J110a cannot print in color using WIndows 8. The printer will only print in black and white even though it works fine on a PC with Windows 7. I installed the latest drivers from the HP web-site.
Hey @KC1964,
Welcome to the HP Support Forums!
I understand that since installing your HP Deskjet 1000 Printer on your Windows 8 computer you have not been able to print in colour. Because you are able to print fine from a Windows 7 computer we know that this issue is not being caused by your printer. I would like to assist you today with resolving this issue. I'm thinking that your machine is either experiencing a driver conflict or a setting issue within the Windows 8 computer. Please follow the steps below.
Step 1: Check Settings:
Open your Start screen by selecting the Windows button on the bottom left hand corner of your computer screen or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl button
Once the Start screen opens type Devices and Printers
Click on Devices and Printers
In the Devices and Printers folder right click on your HP Deskjet
Select Printing Preferences
In the Preferences window select the Advanced button on the bottom right
Look for the Greyscale or Print Black Only and make sure they are disabled
If all settings are correct, yet the issue persists, please proceed to the next step.
Step 2: Try Alternate Driver:
To confirm if this issue is specific to the Deskjet 1000 driver I am going to have you load an alternate driver on your machine.
Open your Start screen by selecting the Windows button on the bottom left hand corner of your computer screen or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl button
Once the Start screen opens type Devices and Printers
In the Devices and Printers folder right click on your Deskjet 1000 and left click on Printer Properties
Left click on the Advanced tab
Left click on New Driver
When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
Select HP as the Manufacturer on the left
Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
After selecting Deskjet 9800 hit next to complete the New Driver Wizard
Under the Printer Properties window select 'Apply' but don't hit OK
Select the General tab
Rename your printer back to HP Deskjet 1000
Hit OK
Lastly, right click on your Deskjet 1000 one more time and left click on Printing Preferences
Left click on the Paper/Quality tab
Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
Click Apply and OK
Now that the new driver is added in, please test printing in colour again.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
HT201303 Mountain lion was downloading after two hr.s stopped down load and bar disappeared.
Was downloading mountain lion and stopped.after an hr. And half.
Sigrid Oliveto wrote:
the small windows that appear with the Command/Space mode have nothing to do with the subject ----
That's the Spotlight window, where you can search everything. It has something to do with the subject.
As I told you, if you have an external drive connected to the iMac, disconnect it. Apart from that, restart the Mac, open App Store > Purchases, and see if you can download OS X Mountain Lion again
Maybe you are looking for
-
My os is windows 8.1. I use firefox. I play facebooks farmville 2. It keeps asking me to install the new 3d flash player which is already installed. I've followed your steps and nothing has worked. I cannot play farmville 2 on firefox because of
-
Oracle Cached Prepared Statement
We recently upgraded from WL 8.1 SP3 to WL 9.2 and in the process updated the JDBC Driver for Oracle from 10.2.0.1 to 10.2.0.2. After we went live we started seeing issue in one table. The table contains some special character which is not suppose to
-
Latest Solaris 9 and 10 versions
Hi guys, Got a simple question: what are latest versions (releases) of Solaris 9 and 10? I'm asking this cause : -according to oracle.com and wikipedia.com, the latest version of Solaris 10 is Solaris 10 8/11; but http://wesunsolve.net/bundles states
-
Scramble layout when split a large matrix report in separate PDF page
Dear All, I have large matrix report, and set the destype=cache, desformat=PDF, width=11, height=8.5 (at Main Section property). This report running well and resulted PDF file. But the problem is in the layout, i got a scramble layout and sometimes t
-
Accessing User Name in a JAVA application from a PKI certificate
Our JAVA application needs to verify the username from a PKI certificate. Is there any way to access this information. We are developing using Oracle JDeveloper, Oracle App Server and db. Thanks,