Mountain Lion extremly slow on Macbook Pro

Upgraded from Snow Leopard to OS X Mountain Lion yesterday and Having god awful performance issues.  the wheel of death is always running.
After Upgrading everything runs so slow. every app is very slow. I have deleted apps I dont need, Ran a disk Utility verify and repair, turned off all notifications.
reset memory by holding down apple, function p and r keys. 
what else can i do. 

Look at Thomas A Reed's Understanding Upgrade Nightmares article http://www.reedcorner.net/understanding-upgrade-nightmares/ and make sure all apps are compatible with Mountain Lion by using www.roaringapps.com. Using both of these you should be able to diagnose your individual problem and get i fixed.

Similar Messages

  • Since I installed Mountain Lion on my new MacBook Pro Retina (august 9) I have severely problems with Safari / Internet / loading webpages. Have had Apple Support

    Restarted the MacBook ... Same problems!!! Even worse now!!! PLEASE APPLE ... solve the problems with Mountain Lion!!!

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro
    Oh, and try the Safari forum instead.
    https://discussions.apple.com/community/mac_os/safari
    You are talking to end users, not "Apple"
    Go back to :Lion maybe until Moutain Lion has had more time to get optimized and ironed out.

  • While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

    While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

    The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
    Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
    If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
    Good luck,
    Clinton

  • Download mountain lion free on my macbook pro with retina display

    How can I download mountain lion free on my macbook pro with retina display since I bought it after June 11th?

    I should add I am trying to upgrade it from UK and it seems it is only doabla in USA.

  • Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    What kind of noise?
    The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
    Allan

  • Is mountain lion build 12C2034 for macbook pro 13 retina available?

    is mountain lion build 12C2034 for macbook pro 13 retina available?

    kurstelle wrote:
    can i make a dmg file right after download? its really really long when using recovery and my ml from the regular macbook pro is not compatible with the retina and im not sure why it works well with other macs except for this one.  thanks so much. having a headache now on how to make it work.
    As you can only get OS X from Internet Recovery, you can't get the OS X Mountain Lion stored on the HDD and make a bootable volume with it. Also, you can't install the OS X version you have on your other Mac because the hardware of this MacBook Pro with Retina display isn't compatible with that OS X version.
    In your case, reinstall OS X and see what happens. If you can't reinstall OS X, take the computer to an Apple Store because you can't do anything with that MacBook Pro now

  • Is OS X Mountain Lion free with the Macbook Pro with Retina Display?

    Is OS X Mountain Lion free with the Macbook Pro with Retina Display?

    You scroll down the page and hit the appropriate button/link:

  • I all ready pay but do i have to pay again mountain lion for my second macbook pro

    do i have to pay again mountain lion for my second macbook pro

    Welcome to the Apple Support Communities
    When you purchase OS X Mountain Lion, you can install it for free in all your Macs as many times as you want. The same applies to all the content you purchase in the App Store, Mac App Store, iTunes Store and iBookstore

  • Its been more than 24 hours and i have not received the claim of mountain lion for my new macbook pro.

    its more than 24 hours and i havent received the claim of mountain lion for my new macbook pro

    Brace yourself - I've been waiting over 48 hours and Apple claims it will take up to 72 hours. After that, God only knows! Oh yeah, if you get your code there's a chance someone's already used it too!

  • Can I upgrade to Mountain Lion with my 2008 MAcbook Pro?

    I have a 2008 MAcbook pro 10.6.8 , 2,5 GHz Intel duel core, 4 GB MHz 17 Inch.    It works fine but I am about to receive a new iPhone 5 and want to use iCloud. Is my computer compatible with doing this? ANd what will be different if I do? Will my computer be faster or slower or stay the same?? I also have a older version of Word for MAc (2008 or 2009) , I dont think it will work anymore if I upgrade. Thanks for your help!
    d

    You are using 10.6.8, so you can sync the iPhone 5 with your computer in this version. However, if you want to use iCloud, you have to upgrade. In this case, you can upgrade to Lion and Mountain Lion. OS X Mountain Lion needs a Mid/Late 2007 or newer MacBook Pro. Read > http://www.apple.com/osx/specs
    First, open the App Store and purchase OS X Mountain Lion. While it's been downloaded, make a backup of your data with Time Machine or Carbon Copy Cloner, and check that your applications are compatible > http://www.roaringapps.com
    When the download finishes, the OS X Mountain Lion installer will show up, so follow the steps to upgrade to Mountain Lion. After upgrading, open System Preferences > iCloud, and follow its steps to set up iCloud on your MacBook Pro.
    Microsoft Office 2008 and 2011 works in Mountain Lion, but if you have 2008, you should update it to the most recent version before upgrading to OS X Mountain Lion

  • Mountain Lion on mid-2009 MacBook Pro spinning beachball is becoming frequent

    I have a mid 2009 MacBook Pro 2.53 GHZ 4 GB ram and more and more I am getting the spinning beachball. When verifying permissions it says Est time 1 minute for close to 5 minutes, My TM drive won't repair.  The machine is just much slower. I have a new hard drive and I replaced the battery because it was giving me a battery error. Is this all the result of running Mountain Lion? I have had it for several months and it just seems to be getting worse.

    Surprised there hasn't been anyone else experiencing this issue.
    I have seen this on 2 new MBP 2.3mhz i5's with the Intel HD 3000 384mb graphics, Lion 10.7.3 & 10.7.4.
    Also with the latest Lion firmware for the late 2011 MBP's that addresses compatibility and stability issues.
    Hopefully there is a fix soon because the painting on my locked screen to login is getting annoying

  • Mountain Lion on 2008 Unibody MacBook Pro?

    I am currently running OSX Lion on a late 2008 unibody macbook pro that has been upgraded to 8GB of RAM.  It runs perfectly and I am a little woried that upgrading to OSX Mountain Lion might make things run slower or less smoothly.
    Is anybody running Mountain Lion on a system similar to mine?  Is it slower?  Faster?  The same?
    Thanks in advance,
    ---Tim

    Correct. You can partition the drive and create a separate volume that has about 300 GBs, then clone to this partition. Here's how it's done:
    To resize the drive do the following:
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • How do I load mountain lion on my second macbook pro

    I have installed Mountain Lion on one of my macbook Pros and would like to install it on another machine.  How do I do that?

    Welcome to Apple Communities
    In the second MacBook, open App Store > Purchases and download OS X

  • How do I Reinstall Mountain Lion on a used Macbook Pro?

    So I just recently purchased a 2011 Macbook Pro off of Craigslist.  A friend picked it up for me, installed an extra copy of Windows 8 he had for me under my name, and made sure the OSX Mountain Lion side worked fine.  Somehow, after the first time I restarted OSX it would no longer boot up, but Windows worked fine.  So I booted up in the recovery partition, reformatted the OSX partition, and attempted to install Mountain Lion.
    The problem is that I don't have it listed under my Apple I.D. as purchased, which makes sense because the last Macbook I bought came with Leopard.  I tried to buy it on the Windows side through iTunes, but I'm not able.  So my question is can I just buy Mountain Lion on someone else's Mac through the App store under my I.D., and will I then be able to reinstall Mountain Lion through the recovery partition?
    Or will I have to resort to resetting my Macbook Pro to factory defaults, losing the copy of Windows 8 I was given, and reverting back to the original OS, which I'm guessing is Lion?

    Well, you need to log in to the App Store on a Mac, using your AppleID, and purchase Mountain Lion. Then, on the konked out Mac's Recovery Partition you'll be able to sign in with the same AppleID and download the ML installer you are now eligible to use.

  • Mavericks extremely slow on MacBook Pro Mid-2010

    Hi all,
    Since i installed Mavericks its been impossible to work on my Mac. I've already done a clean install and no signs of improve.
    I use Eclipse IDE to work, and its extremly slow now. Even can have some video playing on Youtube without some cuts when working.
    What should i do? Downgrade to ML? Sell this laptop? Buy new RAM?
    I've attached below the EtreCheck.... i don't know if theres something on my OS that may be causing this.
    PS: ....and the OS already indexed all the files.
    Big thanks for any help given.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 22:23:30
    Disk Information:
              Hitachi HTS545025B9SA02 disk0 : (250,06 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 249,2 GB (211,39 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Microsoft Microsoft® Nano Transceiver v2.0
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
    Launch Agents:
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
    User Login Items:
              iTunesHelper
              Dropbox
              uTorrent
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins::
              FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
              Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              Default Browser: Version: 537 - SDK 10.9
    Bad Fonts:
              None
    Old applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          mds
                   3%          STS
                   2%          EtreCheck
                   1%          WindowServer
                   0%          DashboardClient
    Top Processes by Memory:
              479 MB          STS
              123 MB          softwareupdated
              106 MB          Safari
              86 MB          Finder
              61 MB          Skype
    Virtual Memory Statistics:
              91 MB          Free RAM
              1.23 GB          Active RAM
              1.14 GB          Inactive RAM
              502 MB          Wired RAM
              5.31 GB          Page-ins
              1.18 GB          Page-outs
    Best,
    Paulo Seixas    

    First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Maybe you are looking for

  • Cry for help: a decent network profile manager

    Am I the only one that finds the default arch linux network profile management a bit.. lacking? Maybe I just don't have it set up right, but it only works for my ethernet connection and connecting to non-encrypted wireless networks. Problem is, I run

  • How to remove duplicates from a large external library

    I recently had a big HD snafu the result of which left me with 95,000 tunes, 53,000 of which should be there...the rest are duplicates.  I've tried Dupin but it's not working...I think the job is just too big.  Does anyone have any recommendations to

  • Produce XML file with a given DTD

    I have only installed XSU, and I was hopping to use pl/sql package XMLGEN to generate XML with a given DTD and a sql query. I can't find input parameter for DTD. Well it seems logical as both DTD and SQL are for defining the XML output file. How can

  • Naming Buttons - Problem with using Captivate 7 Buttons to Open URL or File

    After spending too much time troubleshooting a button problem, I discovered the importance of naming each item in a Captivate project. For some reason I have yet to figure out, publishing to SWF from Captivate causes buttons to function arbitrarily.

  • Help me to tackle Errors in Maintenance Workbench

    Hi all, We r in a middle of an implementation project. In eAM Maintenance Workbench,while updating a scheduled work. Errors occur. 1.FRM-40735:ON UPDATE trigger raised unhandled exception ORA-04062 2.ORA-04062: Signature of package "APPS:EAM_WORKORDE