Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....
Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...
I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson
Similar Messages
-
unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print
I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist. -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Upgradead to v4, now cannot open Inbox in tiscali email and msg says"you have undefined emails in your Inbox". Also have lost contacts in tiscali. Reverted back to v3.6.16 and all works OK-msg then says "you have 5 emails in your Inbox" and can use normally. Can use my tiscali account OK with ie. Gliche somewhere with v4 and tiscali!! Please help.
When I start translating a text with''' Im Translator''', I get this message:
'''Exc in ev handl: TypeError: this.oRoot.enable is not a function''' -
I can't make any in-app purchases anymore on my IPad. Customer support says its a problem with terms and agreements and they can't help me since they don' t know what it is. I can still buy on my PC and my old iPad just not my new one. I used to be able to buy but not anymore. Can anyone help me?
Click here and request assistance.
(80403) -
When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?
Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed. -
PLEASE HELP ME OUT;(
even though this is not for flash, use the solutions - Error 213:19 | Problem has occurred with the licensing of this product
-
When I put the censor on an English word pressing simultaneously the Ctrl and right click (as exactly I acted before installing the new edition of Firebox 4) in order to translate from English to Greek the Babylon Machine dont work
With the previous edition I had no a such a problem Please Help ThanksTry the WhiteSmoke Translator. It is completely compatible with all text-base programs and browsers and works directly from inside our WhiteSmoke 2011 interface allowing you to edit your text in addition to just translating it! You can download a free trial here and see for yourself:
http://www.whitesmoke.com/landing_flash/writerLp4.html?d=4&a=136&r=3266 -
I am having problems in Finding/Downloading Firmware for a Portable Storage Device (Vosonic VP2160). It has been suggested that I download Firmware Version 1.18, but that wont work.
I have noted some where else that there is a Downgrade Firmware Version 1.07 but I am having great difficulty in sourcing it from Vosonic.
Any suggestions out there?
Thanks in anticipation,
Robluca wrote:
Hi krazyshane,
try to add this directive in Section "Device":
Option "DRI" "true"
This got it! Thanks!
Shane -
Problem with discdrive and installing snow leopard
Frustration and desperation has settled in! Lets see if i can get some good help from fellow Apple users!
Ok this is the problem:
A few days ago my computer started to crash almost all programs on my MacBook. I would try to get get into Safari for example and it would SLOWLY start up and then after a few seconds into the prgram it give me the error message "This application Safari quit unexpectedly. Mac OS X and other applications are NOT affected. Click to reopen..." Well again it does that with almost all my programs!
So i took it to the Genius Bar in Munich Germany! (im currently here for business) There the representative of apple actually took my MacBook to the back, checked it for any HD damage and looked at it "under the hub", however couldnt find anything wrong with it physically. So he suggested to backup my HD just reinstall Mac OS X again. I asked him for the new Snow Leopard since i didnt have my startup CD there!
Well im at home now and trying to install the System. However everytime i put the CD in it TRIES to start it up (up to 3 times) and then ejects it. Sometimes even it DOES load it up but then it would tell me to install the new system i would have to restart the computer and when i do that the same problem (3 upstart attempts then ejection) happens!!
Now can anyone tell me why this is happening?! On a side note i also tried insert another DVD and CD and BOTH work just fine! I had a similar problem with a previous DVD b4 but the problem was irratic.. meaning sometimes it worked sometimes it doesnt! Any suggestions or do i need a new Discdrive?!If your MacBook is under warranty have them check the DVD drive. They replaced my DVD drive because it was doing the same thing. Try the following and see if it helps.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM -
My iMac says I have 10.6.8 operating system now. Problem is I do not know if that is 'Lion' or 'Snow Leopard' ... and I wish to upgrade to 'Mountain Lion'
That is Snow Leopard.
Upgrading to Snow Leopard, Lion, or Mountain Lion
Upgrading to Snow Leopard
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Before upgrading check that you computer meets the minimum requirements:
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Upgrading to Lion
First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Before upgrading check that you computer meets the minimum requirements:
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
-
just bought lion, can't install, says S.M.A.R.T error!!, just bought lion, can't install, says S.M.A.R.T error!!
Please join this thread. If we consolidate our issues (since they appear to be the same) think we will get more attention: https://discussions.apple.com/thread/3190026
-
Best way to format my 16GB flash drive for Mac and PC transferring large power point files?
best way to format my 16GB flash drive for Mac and PC transferring large power point files?
format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details. -
will internet recovery work on my mid 2010 MBP with yosemite and the firmare internet recovery update designed for OS lion
Yes, it does. The point is can your computer use full Internet Recovery with the firmware update or not. If not then you have to begin with the Snow Leopard DVD that came with your computer and do an Erase and Install.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
However, if you can use full Internet Recovery:
Install Yosemite, Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
Maybe you are looking for
-
How do I contact Firefox and other browsers to give my website clearance after it has been hacked and determined not safe? Currently, my website www.balancingchanges.com comes up with a WOT warning. I have not made any changes to my site for nearly 2
-
Financial Reporting 9.1.3 - Modifying Email Body text of cmd line scheduled
I would like to add text to the body of the command line scheduled email that is sent out using Financial Reporting. Ideally I would like to suppress the text that is automatically added to the body of the email by Financial Reporting as well. I have
-
PhotoCD images in Photoshop CS6 or CC
How do you open PhotoCD images in Photoshop CS6 or CC?
-
SOA Composite Application Deployment Failed
I have created a composite SOA application and trying to deploy it on WLS. I have created a connection to the Application Server MyAppServerConnection. I right click the project name and point to Deploy, it gives the webservice name "validationForCC"
-
I was wondering if anyone knew if Ableton could be run as a rewire slave through garageband as an instrument. I have done it with pro tools but i am unsure how to set the I/O settings to the corresponding channels between programs. Thanks, KappaSunsh