Mountain Lion Image Capture won't recognize my Canon MP600 Scanner

I'm not sure when it happened as I don't use my scanner all that much but at some point in the last month or so Image Capture can'is no longer able to see my scanner. It's a multi function Canon MP600 printer/scanner. I can still print but no go on scanning. I checked out the Canon site for drivers/updates but there are none. System Report sees the MP600 and like I said, I can print just not scan. I'm running 10.8.2.
Any ideas or help is greatly appreciated.
Joe

This might have been my fix, too. I did as this instructed; however, after installing v.2.11 from Apple's site and deleting the printer, then adding it back again (I also unplugged and replugged the printer), nothing changed.
I then did as "noseyp" below suggested and at the Canon site added the scanner driver for Mac OS 10.7. That process (after I bypassed my security roadblock), required a computer restart.
So was is it v.2.11 installation (plus the restart) that made the difference? Or was it the 10.7 scanner driver? I won't know.
I'd suggest to anyone to do as "legendarybc" suggested, but then do restart your computer. If that doesn't work, then add the 10.7 scanner driver from:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp600#Overview

Similar Messages

Mountain Lion Image Capture won't recognize my Canon MP800 Scanner

My MP800 is able to print from my new iMac but it is not even recognized for scanning. Is this something that will be corrected soon? It's a bummer to have this perfectly good all-in-one printer/scanner from Canon and now it won't scan. Anyone have any suggestions? I already downloaded all the Canon drivers that are available for Mountain Lion. Still nothing.
I also tried using Preview ... same story.
Another writer had this concern with his Canon MP600.

Assuming you downloaded and installed these from the Canon website:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp990?selectedName=DriversAndSoftware#
Drivers
Sort byMost Recent Post Date
Most Popular Downloads
Most Relevant Downloads
Largest File Size
A > Z by File Description
Z > A by File Description
File Description
Date
Size
MP990 series CUPS Printer Driver Ver. 10.67.1.0...
08/03/12
11.89 MB
MP990 series Scanner Driver Ver. 15.5.1b (OS X ...
08/03/12
13.90 MB
ICA Driver Ver. 1.11.0n (OS X 10.6/10.7/10.8)
07/11/12
7.14 MB
Then I would recommend you perform the following:
Your Model apparently needs to use Apple's "Print & Scan" which is found in Applications>System Preferences>"Print & Scan". There you will follow the following instructions from the HP Support site to Scan, for instance:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu (# ), and then click System Preferences .
Click Print & Scan (# ).
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.Figure 4: Example of the Show Details scanning screen#
Change any scan settings as necessary, and then click Scan .NOTE: Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
Hope this helps

Image Capture won't recognize camera under other user log in

Image Capture won't recognize cameras under another other users log in on the same computer even though it works perfectly under the main user log in. Can some body hep me pleeze? What am I doing wrong or how can I let my daughter use her digital camera under her log in?
Power Mac G-5 Dual 1.8 Mac OS X (10.3.9) 80gbMaindrive,250gbSeagate/1gb ram/128mb vram

Hi G-Man,
It's probably something in the Preferences folder; Users/herusername/Library/Preferences. Start by removing com.apple.ImageCaptureApp.plist and trying again. If that doesn't do it drag the entire Preference folder to the desktop, log out and back in. Launch it again and if it works you can either reset preferences for all System Preferences and apps or drag the preferences files a group at a time back to the new Preference folder in Library and test Image Capture each time. That way you can narrow it down to the one offending preference file.
John

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

To use Image Capture you need an ICA driver for your scanner. Checking the Fujitsu web site for drivers for the iX500 I only see a ScanSnap manager for OS X. No mention of an ICA driver. So you may need to contact your local Fujitsu support.

Image Capture does not recognize my Canon Pixma MP150 printer

Image Capture does not recognize my Canon Pixma MP150 printer since I upgraded to Mavericks.

To scan with Image Capture you need an ICA driver. Looking through the CanonDevices list in the /Library/Image Capture folder I cannot see an entry for the MP150. And I checked Canon Australia's web site and there is no ICA driver for the MP150. There is a scanner driver and MP Navigator for OS X 10.7. You may be able to install and use the driver and application on 10.9, although you will have to get past Gatekeeper to install both items as they are not digitally signed. To do this, you can hold down the Control key and click on the installer. A pop-up menu will appear and you can select Open. You will then be able to install the driver and then the application. If they do install then see if you can open MP Navigator and scan from the MP150.

Image capture won't recognize Canoscan lide 700f

Hello. I have OS X, v. 10.6.7 I have been using Image Capture to run the Canoscan lide 700f scanner. Then, it stopped recognizing the scanner. Image capture is opened and says "no camera or scanner attached." The scanner is operational. The MAC sees the printer in systems preferences > hardware > print and fax. Any ideas on what I can do to get this scanner recognized by Image Capture again? Thanks for your help.

I had the problem with the same scanner and Lion. When the Mac would go to sleep, Image Capture would not recognize the scanner after it woke up. Had to unplug and replug the USB connector to get it to start correctly. I was blaming it on the scanner driver, but I accidently discovered that if I opened Adobe Photoshop Elements 6, all of a sudden the scanner would respond to an attempt to import from the scanner (to Elements). After that, Image Capture could talk to it just fine. So it appears that it is an Image Capture problem and not an issue with the Cannon driver.

In Mountain Lion Image Capture only recognizes Canon SLR camera under root user

Being a school of fine arts we are using Canon 5D MKII cameras for use in Dragon Frame stopmotion.
In OS X 10.8.4 the camera shows up in System Information > USB but is not recognized in Image Capture (and Dragon Frame) when the user is logged in as a network- or standard user.
Using an local admin account the camera is sometimes recognized ('fuzzy logic') and is always recognized when logging in as a root user.
In Snow Leopard this problem does not exist but a rollback to Snow is not an option because Adobe CS 6 Premiere does not function well under 10.6.8.
The root user 'solution' suggests that it is permission related.
We found this problem on all our iMacs and we tried PRAM zapping and different cameras and cables.
Does anyone know a solution to this problem?
Barth Visser
System Administrator School of Fine Arts ArtEZ
The Netherlands

Have you tried repairing permissions in Disk Utility?

Image Capture doesn't recognize my Canon device camera (it has before). I made a copy of the Image Capture app by mistake. What do I do?

My Macbook doesn't have iPhoto installed. ?? I don't know why, because it used to be installed.
I have been able to download photos from my camera using Image Capture, but now Image Capture doesn't show my camera in the Devices window. It did yesterday.
Ideally, I would like to install iPhoto again, but how do I do it without having to purchase the app again?
This might also be relevant:
I wanted to add an Image Capture icon to my dock, but I inadvertently made a copy of the app (called Image Capture copy). When I tried to erase the copy, I couldn't. Image Capture copy is in my Trash and the Image Capture app is in my Applications folder. I tried opening the app from both the Trash version and the app version, but it doesn't help.
Please help!
Sue

Use the disks that came with your Mac to do a custom install of the software you need, i.e. iPhoto. The disk should look like #4 in this screenshot:

IPhoto and Image Capture won't recognize jpegs

Ok, yes I know this has been discussed, but I feel the solutions in previous threads were work arounds, not solutions to the actual problem.
I have a Kodak digital camera, and a MacBook pro (with the software up to date). I'm using iPhoto '09. I've used this combination for 3+ years without a problem. In the past when I plugged in my camera, iPhoto recognized the camera, and recognized the photographs, and imported them without a problem. Today when I plugged in the camera, it iPhoto recognized the camera, however it cannot recognize the jpegs on the camera, it gives the error "format not recognized." I have not (intentionally) changed any settings on the camera or iPhoto. What could have changed to make this combination work once before, but now no more?
-Randy

In your first post you say:
Ok, yes I know this has been discussed, but I feel the solutions in previous threads were work arounds, not solutions to the actual problem.
Correct. They are workarounds. There is no current solution.
IPhoto menu -> Provide iPhoto Feedback

Image Capture doesn't recognize SD card

In Tiger I would pop in my SD card into a reader in my pcmcia slot and image capture would read it as a device and I could then use it to embed color profiles etc. as it downloaded to the correct folder.
Leopard's Image Capture won't recognize the card as a device. It will mount and I can pull from it like a flash drive in the finder window, but I would love to use Image Capture again.
Anybody know what happened?

Geoff Cleary wrote:
I have filed a bug report with Apple.
I spoke on the phone with an Apple Developer Connection representative and have communicated with Apple via e-mail on a couple occasions now about this issue. They have had me follow some troubleshooting procedures and send them the results.
The bug report is still considered open, so they must be working on fixing the problem. Otherwise I would think they would have close the bug report by now. Maybe we'll see a fix in 10.5.2?
Also, I noticed the following interesting phenomenon: I made a disk image of my SD card and then ejected SD card. Upon mounting the disk image of the SD card, iPhoto launched, just as it used to under Mac OS X Tiger when I inserted my SD card. Intriguing!

Image capture does not recognize Canon Scanner

I have two Canon Scanners, a Canoscan 8800F and a Canoscan LiDE 60. Image Capture does not recognize either of these. Both worked with Mountain Lion.

This user found some success acutally using *older* drivers. While that sounds odd, it might be worth a try: https://discussions.apple.com/message/23759017#23759017
I used to have a LIDE 60 - it is a great little machine. Good luck!

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Image Capture will not recognize my Epson Workforce 615

Image Capture will not recognize my Epson Workforce 615. It would not recognize my HP 4280 either.
I can print but I cannot scan using Image Capture. Scanning through Epson scan or HPScan Pro works.
What am I doing wrong? I have searched all over the net for an answer and there does not seem to be a solution. Only other people searching for the same answer.
And no I do not want to use VueScan.
Thanks!

Thank you for your quick reply. I ran all of the updates and the software is current.
Image Capture recognizes the printer/scanner via USB but not WIFI.

Image Capture doesn't recognize iPhone and Camera anymore

Image Capture doesn't recognize my iPhone or my Fujifilm camera. I am pretty sure this happened after updating to Safari 4.0.2 and having to restart which I did today. Yesterday I was able to to browse through my devices.

I'm adding that iTunes has no problem reading the iPhone.

IPhoto and/or Image Capture do not recognize iPhone 3G and/or 4

SYSTEM DETAILS:
Operating System: Snow Leopard - 10.6.6
iTunes 10 - 10.1.1 (4)
iPhoto '09 - v8.1.2 (424)
Image Capture - 6.0.1 (428)
iPhone (3G and 4) - iOS 4.2.1
OPEN USER ACCOUNT 1:
When connecting iPhones to Mac the following actions take place:
iTunes auto-opens
iPhoto auto-opens
iTunes begins synchronization
iPhoto recognizes iPhone and any existing photos on iPhone
Manually launching Image Capture recognizes iPhone and any existing photos on iPhone
OPEN USER ACCOUNT 2:
iTunes auto-opens
iPhoto DOES NOT auto-open
iTunes begins synchronization
iPhoto DOES NOT recognize iPhone
Manually launching Image Capture DOES NOT recognize iPhone. Image Captures gives following message: "No camera or scanner connected."
INTERNET SEARCH RESULTS:
Internet search results discuss restoring iPhone to factory defaults - Tried this - did not work
Internet search results discuss powering off/on iPhone - Tried this - did not work
Internet search results discuss deleting ~/Users/username/Library/Preferences/com.apple.iPhoto.plist - Tried this - did not work
ANALYSIS:
Based on this information, this is an issue isolated to the User Account #2. Recreating User Account #2 is not an option.
Any suggestions on how to reenable ability to transfer photos from iPhone to iPhoto and/or Image Capture appreciated.
Thanks.

I am having the identical error. I have an iPhone 4 and 2 macs, the phone is managed from an old G5 PowerMac and images are saved from it to Aperture for photos and videos go to iPhoto 11. The Mac is running 10.5.8. I last appear to have downloaded movies from iPhone4 to mac in December , the oldest video being 10 Dec 2010.
This week I was going to back up a handful of images on the phone but after connecting it to the mac, something that happens several times a week to sync to itunes for app updates etc I found it did not list for import options in iPhoto nor in Aperture. I looked at Image Capture and that tells me no device is connected.
I have no problems taking images off the phone using a MBP which has 10.6 and Image Capture recognises the phone.
I have tried the following after reading through all the discussions on the topic of which there appear to be many with this problem.
Restore the iphone then update settings from archive. - did nothing
Closed apps reconnected iPhone started apps... - did nothing
Switched phone off then on then connected to mac then opened apps - nothing
This Mac seems happy to communicate t othe phone though iTunes but appears to have lost the way when it comes to getting images off the iPhone. Any help keenly appreciated.
regards
Adrian

Mountain Lion Image Capture won't recognize my Canon MP600 Scanner

Similar Messages

Maybe you are looking for