Mountain Lion install interrupted intentionally--now what?

I was installing ML on my imac this morning and had to quit because of a scheduled power shut off. I selected the backup drive for the startup.
Now when I get power again, how do I resume the install to the imac? Do I have to start over, and if so, how? thanks

Thanks. I booted up from my backup and repaired the HD with Disk Utility. When I restarted, the install started over again automatically and all went well.

Similar Messages

Mountain Lion install failed and now can't access HD

Currently on a Early 2011 high-end Macbook Pro running Snow Leopard.
I downloaded and then went to install Mountain Lion, everything was fine and it began to restart for the install after the initial loading thing. However, when it came to install it gave me an error that roughly said the drive is damaged and can't be repaired, telling me to click restart and try installing again. I did this, (taking slightly longer and the colour of the background became more yellow at one point) but instead of the logon pane it went to OSX Utilities.
On Disk Utility, it said Macintosh HD was unmounted. Below that, under 'disk1' Mac OS X Install ESD appears and then below that under 'disk2' Mac OS X Base System is shown. I tried to mount the HD but it didn't work, and when I tried to repair the disk it said it couldn't be repaired and that I should back up my files. I do think my files are still present, I was able to access them on the Burn pane through the finder window. I then tried to reboot using the Macintosh HD startup disk but that then said it didn't have enough information to do so.
This person's problem (https://discussions.apple.com/thread/3192437) seemed almost identical to mine, however I have files I need and cannot afford to lose them. What do you suggest I do to retrieve my files? That is what I am solely concerned for right now. I backed up the most important files earlier, but I really do not want to lose everything.

Whatever you do, DO NOT REFORMAT THE DRIVE. You can just get a small <500Gb EXTERNAL bus powered drive, dismantle it and follow the instructions above. If you already have one then that's even better.
The drive I'm showing here is the drive that used to be inside of my computer. It took apart an old 320Gb seagate drive. The connections on these drives are all universally interchangeable. They just add some circuits and a USB (or other) interface. I would just get the cheapest drive that you can get that is for laptops and looks simple to take apart. (This is almost exactly the drive that I did this too http://www.amazon.com/Seagate-FreeAgent-Portable-External-ST903203FAA2E1-RK/dp/B 001FWIE0K/ref=sr_1_56?ie=UTF8&qid=1343340447&sr=8-56&keywords=seagate+external+h ard+drive)
The "old internal" drive should still be able to allow you to install ML on the "new" drive as long as you tell it to. It sounds complicated, but it's really not once you get in there and start doing it. It was actually quite easy.

Why can't i access the app store after Mountain Lion install?

Why can't i access the app store after Mountain Lion install?

Hi There,
What happens when you try to access it? You've not given a lot of information for people to help you.

I just download mountain lion to my mac, now microsoft office suite doesn't work....it says 'you can't open the application 'microsoft word' because PowerPC applications are no longer supported. What does this mean and what do I have to do to fix it??

I just download mountain lion to my mac, now microsoft office suite doesn't work....it says 'you can't open the application 'microsoft word' because PowerPC applications are no longer supported. What does this mean and what do I have to do to fix it?? HELP!!

Install Snow Leopard on another boot partition, or upgrade Microsoft Office to a newer version, or use any number of better alternatives. Some of them are free.
Consider
LibreOffice (donation-supported)
NeoOffice ($10)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

My mountain lion was interrupted during download it says..... "The product distribution file could not be verified. It may be damaged or was not signed." what to do pls help

My mountain lion was interrupted during download it says..... "The product distribution file could not be verified. It may be damaged or was not signed." what to do pls help

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Post the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?

Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open  > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version

I downloaded OS X Mountain Lion last night and now my Logic Express program doesn't work. What do I do now?

I downloaded Os X Mountain Lion last night and now my Logic Express doesn't work. What do I do now?
Thanks

Upgrade to Logic Express 9.1.7; it's the mimimum version required for Mountain Lion.
http://support.apple.com/kb/HT5421

HT1529 I have the new mountain lion OS and every now and again my screen zooms in. i can't work out what I'm doing to make this happen

I have the new mountain lion OS and every now and again when I'm working with the mouse the screen zooms in. How does this happen and how can I reverse it

You are double tapping with 1 finger.
System Preferences > Mouse > Point & Click > Smart Zoom.

Durin Mountain lion install, Mac loops endlesslu as pert of restart

During Mountain Lion install, the Mac loops forever on restart. Download seemed to go ok, albeit very slow, bt now it is trying to restart continuously. What can I do from here? Thank you.

I am assuming that it was Lion Recovery that allowed me to do that.
Yes.
I do have antivirus installed, so I guess my next step would be to disable that and turn off the firewall, then try the install again. That will have to happen another day, as I have to work on other things. Thank you!
Ok. Keep us posted ... you're welcome

I am presently downloading mountain lion. When it finishes, what is the procedure?

I am presently downloading mountain lion. When it finishes, what is the procedure?

My recommendation:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
Once you finish making the flash drive test it by restarting from it:
Boot Using OPTION key:
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager appears.
Select the disk icon for the USB flash drive.
Click on the arrow button below the icon.
Now install Mountain Lion from the flash drive.
If you are not interested in doing all of the above, then just click on the Install button when the Mountain Lion application automatically opens on your computer after it downloads.

Mountain Lion install results in blank gray screen.

I recently downloaded and installed Mountain Lion on my wife's late-2007 iMac. Unfortunately, each time, after the installer finishes and reboots, the computer sticks at a blank gray screen where normally the Apple logo would appear while things boot in the background. I have tried restoring from Time Capsule and re-downloading then reinstalling, but it produces the same result.
With the gray screen problem present, I've tried a Safe Boot, holding down Option to select a disk to boot from (nothing comes up when I do this, just the mouse cursor), and resetting the PRAM/NVRAM. I haven't really been able to find anyone else having this particular issue. The hard drive in the iMac is a little over a year old as we had to replace the old one. And from what my wife read, the late-2007 iMacs are Mountain Lion compatible.

saw this in another thread about a macbook pro slowing up after OSX Mountain Lion install:
the mac owner had mentioned his mac going very slow, and was told it could take several days for the new OSX to sort things out. Perhaps this explains my issue and perhaps yours.
"Yes this can be the case, even slow shutdowns and startups. But Hardisk space can also be a factor. Anything below the 10Gig mark of space left can cause extreme slowdowns."

Can't open pics in Preview since Mountain Lion install

Hi - I use Preview to open my iPhoto pics and then save them at a smaller resolution for using on my web pages, blogs, emails etc. It's a bit cumbersome but it works. Now, since I upgraded to Mountain Lion on my MacBook (so it will sync documents with my iPad) blow me - I find I can't open files in Preview! I get a box headed 'icloud for Preview.' The text then says: 'You can move your existing documents to icloud by dragging them here from the finder or other apps.' There's then an option to cancel, and a greyed-out box saying Open, but of course I can't open anything! It means, really, that I have lost the ability to edit my pictures with Preview. Is this right? And is there anything I can do about it? Also, I notice my iPhoto icon has disappeared from my Finder so I can't open iPhoto from there. It's all happened since the Mountain Lion install. Can anyone help, please?

I don't know about your Preview problem and I am interested to see responses about it.
When you say no iPhoto in Finder. Do you mean iPhoto is not listed in the Applications folder? If you do a Finder search on iPhoto is it found. Mine is in "Bobs HD>Applications

Mountain lion install disk

i want to make a mountain lion installer disc on a 16gb flash drive for my new macbook air with 10.8.4 already on it (as anybody would), but when i try to option-click the buy button at the app store it says "we could not complete your purchase osx mountain lion is not compatible with this computer". As it's a new computer, this implies an issue--does anyone know what it might be? --BTW following david pogue's mountain lion bk instructions, p 796 here--he also mentions that apple used to sell installer disks with 'lion', but stopped--[wish they hadn't]. i'm off to buy a hard drive so i can archive the whole lot & do it that way--but honestly, apple folks!
thanks

The Mid 2013 MacBook Air includes a special 10.8.4 build that can't be downloaded from the Mac App Store, so this is the reason why you see a message telling you that Mountain Lion is not compatible with your MacBook Air.
This also means that you can't create a Mountain Lion install USB drive until Apple launches a new OS X update, like 10.8.5, so all Macs will be using the same version and you will be able to download OS X. Anyway, in a new Mac, it's possible that you can only get OS X Mountain Lion from OS X Recovery, preventing you from creating an install USB drive.
What you can do is to use Recovery Disk Assistant > http://support.apple.com/kb/HT4848 Note that this won't include the installer, so OS X will have to be downloaded from Internet

Mountain lion install crashes-corrupted download

Twice now, after lengthy downloads to my 27" IMac running 10.6.8. the mountain lion install crashed in the early stages with the same error message that the download is corrupted. please delete the install package from the application folder and repeat the download. After the second try, I decided to try downloading Lion which I purchased early this year but never downloaded.
Any suggestions?

The installation could not be completed because errors were found on your drive. Boot up again while holding down the option key and the select Recovery partition. From there, open Disk Utility and first verify and then, if needed, repair the disk "Macintosh HD". If your drive is 'fixable' this will repair any errors.
Clinton

After Mountain Lion install, my iMac powers off instead of just going to sleep. Help? Thanks.

After I installed Mountain Lion on my 2009 iMac, it will power off after I don't use it a while. It used to just go to sleep, I'd shake the mouse, and it would come back up. Now it powers off and I have to power it back up every time.
My Macbook has NOT had this problem since Mountain Lion install. It is fine.

Do these resets to clear errant commands:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Mountain Lion install interrupted intentionally--now what?

Similar Messages

Maybe you are looking for