Mountain Lion Network will not connect

Mountain Lion Network will not connect to adobe.com on my WiFi network.
While my iPad and iPhone will connect using my WiFi network.
I have tried to connect using 8 different browsers that I have and get the same results.

eth0 Link encap:Ethernet HWaddr 5C:AF:04:82:2D:3A
inet6 addr: fe80::5eaf:4ff:fe82:2d3a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12126 errors:0 dropped:0 overruns:0 frame:0
TX packets:7487 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11150781 (10.6 Mb) TX bytes:1005897 (982.3 Kb)
Interrupt:21 Memory:febe0000-fec00000

Similar Messages

After installing Mountain Lion, contacts will not sync

After installing Mountain Lion, contacts will not sync to iphone 3G

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

Mountain Lion installer will not let me choose my Lion Partition as an install location

Mountain Lion installer will not let me choose my Lion Partition as an install location.
Any ideas why?

Again, why will the Mountain Lion installer not allow me to select my Lion partition as the location for the install?
Good question. That's the main way it's supposed to be installed. You shouldn't even need to choose a partition. You purchase Mountain Lion through the App Store, it downloads to the Applications folder and automatically begins the installation on the drive where Lion or Snow Leopard resides as soon as the download is complete.

I had to reformat my early 2008 MacBook and have now lost Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

Help please!
I had to reformat my early 2008 MacBook and have now lost my pre-installed Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

^ hahahahahahaha^
from da uk

After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxx

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

Selected Wi-Fi Network will not connect

I have selected a Wi-Fi network in my home, entered the password and it shows as selected; but it will not connect. Help

One frequent suggestion is to check that your router has the latest firmware. Another is to test your wifi at a public wifi location like a coffee shop and such. If it works there, then you'll know it's your router. And no, just because your router works with other computers doesn't mean it will work with the iPad.

My airport network will not connect to to the internet via my modem. My host computer is a hp running windows xp. I have had great connection for 3 years. Then suddenly can not connect. Please can you assist

My airport will not connect to the internet via my modem. Worked for 3 years. Suddenly stopped. Main host computer is hp running windows xp.
When trying to connect windows states connection was cancelled. I have had hp checked by compputer repair and still have same problem?

The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

Guest network will not connect to Internet

My Airport Extreme guest network is not connected to the Internet. The main network is fine. And all of it worked yesterday and before.

If everything was working before, there may have been an interuption of service on the network, so devices may be out of sequence.
Suggest that you power cycle the entire network as follows:
Power everyhing down....all devices...order is not important
Wait a few minutes
Start the modem first and let it run a few moments by itself
Start the AirPort Extreme and let it run a minute
Start other devices one at a time about a minute apart until everything is powered back up
Check the network for proper operation

Wifi printing after Mountain Lion upgrade, "printer not connected" error

I have Canon MP610 printer. Was getting error message "Looking for printer" or "Printer not connected" after upgrading to Mountain Lion 10.8. Printing works fine when I directly plug in USB cord to MacBook Pro to print. However, on the wifi network, no luck. Today I have upgraded Canon's latest driver, reset the printer system, deleted printers from system icon in System Preferences, added new printer back in..... Nothing.
I have reset Time Capsule, where my printer USB is currently plugged into.
Nothing.
Please advise what to try next...??

AirPort Utility 5.6 is available at AirPort Service and Support.
5.6 doesn't work with Mountain Lion, so am I stuck?
I already had AirPort Utility 5.6 on a Lion machine and upgraded to Mountain Lion with no issues. AirPort Utiliy 5.6 works fine as does AirPort Utility 6.1.
But, I did not try to download and install AirPort Utility 5.6 since it was already on the Mac.
Please try again and report on your results.
AirPort Utility 5.6 for Mac OS X Lion

OSX Mountain Lion "Messages" will not let me sign in...

I cannot for the life of me get messages to work on the new OSX mountain lion. I keep getting this alert when trying to sign in:
"COULD NOT SIGN INTO iMESSAGE. The server encountered an error processing registration. Please try again later."
Any ideas? I have restarted both my macbook and macpro, reset my apple ID password... no love.

I have spent over 40 hour walking through this issue with Apple senior tier engineering support with Apple for Mountain Lion and Developer support, plus the Apple store genius bar and their high level connection, Getting no where trying to resolve same issue it seems. The only thing I can get to work is AIM to video chat or share screens. Messages accounts have added 5 other account .mac accounts and I can not sign into any of them or remove any of them either. Over time I have had a .mac address that was made into a mobile me address that was then converted into a .mac email again and became a cloud account. And I have a developer account that has a separate name that works with iTunes connect. When I try to manage accounts to change the password of one it corrupts the the password of the other. When I try the change emails of one it says it is in use by the other.
There are 2 accounts for the iTunes and App Store.
Messages is choking on my 2 accounts and there is a definite unresolved problem with the cloud in regard to them it seems.

LR4 4.2 (Mac Mountain Lion OS) will not import of CF card

My LR4 has stopped importing from my CF card (it will import from other SD and hard drive formats, but not the CF card).
I have tried other readers, as well as creating a brand new catalog (while importing old catalog), then tried to import from CF card to new catalog and it still hangs in the import window. The import bar does not move and no photo thumbnails show up.
Work arounds that work on the same machine with the same hardware: I can open LR3 and import photo's to the hard drive, then I can log into LR4 and import from hard drive and just "add" the LR3 imported photo's to my LR4 Catalog. This is the only way I can get LR4 to import the photo's from my CF card. Like I said, the reader is not the issue, the card is not the issue, it's LR4! This is frustrating and I have no reason why it stopped. I haven't installed any new programs or removed any programs in a long time and yes it did work well after mountain lion install.
I have a late 2011 IMAC with mountain lion installed, 16 gig RAM and 3.4 Sandy Bridge CPU. Help, thanks
-Ry
[email protected]
PS. Ideally I want to remove my LR3 and all it's catalogs as I move into 2013 but now I am afraid too because it's my only saving grace right now. I have seperate catalogs from 2000 thru 2012 in each version of LR so as you can imagine my hard drive is getting a bit full. My 2012 has nearly 13.5k photo's in it.. hoping that's not the issue.

Jesse,
Check this out and see if it helps : http://chadthompson.me/2012/07/26/a-mountain-lion-ate-my-jdeveloper/
-Arun
Edit : And this : https://blogs.oracle.com/shay/entry/installing_jdeveloper_on_mac_os

After installing mountain lion facebook will not load on iMac

Any helpers Please !!

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

Mountain lion download will not resume

Finally figured out how to get the program to downlaod but my connection in africa is super slow am trying to downlaod it in increments, downloaded a bit yesterday, came back today to continue but no matter how many times i click resume in the task bar or in the purchases window nothing happens and still says "paused". frustrating.

If you properly pause the download, it should be able to resume without any problem.
When I downloaded Mountain Lion, I paused and resumed hours later without any problem. But when it reached 95% of the download, my internet connection dropped for like 1 minute, and when it came back, the download restarted from zero.
So as long as the internet connection is not dropping during the download, you should be able to resume.

Mountain Lion - mail will not allow me to add to iphoto

I downloaded Mountain lion and I saw that there was an iphoto library problem, but all my photos are there. However, when people are sending me photos, I can no longer use the "add to iphoto", it will allow me to drag photo into iphoto.

That is right - it is a bug - report to Apple and work around until an upgrade resolves it
LN

Mountain Lion Network will not connect

Similar Messages

Maybe you are looking for