Mountain lion not dowloading- Error message

Hi,
I've been trying to upgrade my OS X from Snow Leapord to Mountain Lion from past few days. Whenver ML gets downloads upto 4.33 gb or near it, i get a message that says download can not be continued due to an error.  It has happened twice so far. Can anyone help me out with this problem
Regards?

No it is definitely not the internet connection. IDK what is happening. Whenever I reach near the complete file size it gives an error. Just now i found some articles , which says that i should delete -
com.apple.appstore in /var/folders/
Also I am not sure if apple stores here (In India) allows you to come with a pocket drive to get it installed. Have to check that out.

Similar Messages

  • Does OS X Mountain Lion not include MPI (Message Passing Interface)?

    Hi,
    Does OS X Mountain Lion not include MPI (Message Passing Interface) as Lion did? I need that to compile CUDA 5.0 examples.
    I'm running Mountain Lion 10.8 without any updates yet.

    I take this statment from the link I posted
    Note: Unlike most UNIX-based operating systems, OS X does not use a preallocated disk partition for the backing store. Instead, it uses all of the available space on the machine’s boot partition.
    to basically mean it's limited only by the disk space.
    There is also this:
    Both OS X and iOS include a fully-integrated virtual memory system that you cannot turn off; it is always on. Both systems also provide up to 4 gigabytes of addressable space per 32-bit process. In addition, OS X provides approximately 18 exabytes of addressable space for 64-bit processes. Even for computers that have 4 or more gigabytes of RAM available, the system rarely dedicates this much RAM to a single process.
    To give processes access to their entire 4 gigabyte or 18 exabyte address space, OS X uses the hard disk to hold data that is not currently in use. As memory gets full, sections of memory that are not being used are written to disk to make room for data that is needed now. The portion of the disk that stores the unused data is known as the backing store because it provides the backup storage for main memory.

  • My computer keeps restarting on osx mountain lion with this error message:

    Interval Since Last Panic Report:  104 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    08869DB0-7F78-4C11-90A9-1D35FC7DBFC6
    Fri Jul 13 12:38:41 2012
    panic(cpu 4 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f823d59b1, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000008, CR3: 0x000000002495e04e, CR4: 0x00000000001606e0
    RAX: 0xffffff7f823d5a84, RBX: 0x0000000000000077, RCX: 0x0000000000000000, RDX: 0x00000000000f6e6f
    RSP: 0xffffff80f1ab39b0, RBP: 0xffffff80f1ab39c0, RSI: 0xffffff8027c7f800, RDI: 0xffffff802672d000
    R8:  0x0000000000000075, R9:  0xffffff7f8242f380, R10: 0xffffff80f1ab392c, R11: 0xffffff80f1ab3930
    R12: 0xffffff8017a9f188, R13: 0xffffff802672d000, R14: 0xffffff80d39d0000, R15: 0xffffff802672d000
    RFL: 0x0000000000010282, RIP: 0xffffff7f823d59b1, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000000000008, Error code: 0x0000000000000002, Faulting CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80f1ab3660 : 0xffffff8000220792
    0xffffff80f1ab36e0 : 0xffffff80002c4794
    0xffffff80f1ab3890 : 0xffffff80002da55d
    0xffffff80f1ab38b0 : 0xffffff7f823d59b1
    0xffffff80f1ab39c0 : 0xffffff7f823d9f7d
    0xffffff80f1ab3b00 : 0xffffff7f823d6ed4
    0xffffff80f1ab3b60 : 0xffffff800065593e
    0xffffff80f1ab3b80 : 0xffffff800065621a
    0xffffff80f1ab3be0 : 0xffffff80006569bb
    0xffffff80f1ab3d20 : 0xffffff80002a3f08
    0xffffff80f1ab3e20 : 0xffffff8000223096
    0xffffff80f1ab3e50 : 0xffffff80002148a9
    0xffffff80f1ab3eb0 : 0xffffff800021bbd8
    0xffffff80f1ab3f10 : 0xffffff80002af140
    0xffffff80f1ab3fb0 : 0xffffff80002dab5e
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelHD4000Graphics(7.2.8)[6B02D782-A79F-399C-81FD-353EBF F2AB81]@0xffffff7f823cd000->0xffffff7f82433fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[C0404427-3360-36B4-B483-3C9F0C54A3CA]@0xffffff 7f80829000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[474FE7E9-5C79-3AA4-830F-262DF4B6B544]@0xff ffff7f8088d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[EF26EBCF-7CF9-3FC7-B9AD-6C0C27B89B2B]@0 xffffff7f80854000
    BSD process name corresponding to current thread: Google Chrome He
    Mac OS version:
    11E2620
    Kernel version:
    Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
    Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 914746831561
    last loaded kext at 10232972675: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f824f1000, size 28672)
    last unloaded kext at 511123964876: com.apple.iokit.IOEthernetAVBController          1.0.1b1 (addr 0xffffff7f818db000, size 20480)
    loaded kexts:
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.ApplePlatformEnabler          2.0.5d3
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AppleHDA          2.2.3f13
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMikeyDriver          2.2.3f13
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleIntelHD4000Graphics          7.2.8
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.7f2
    com.apple.GeForce          7.2.8
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.32
    com.apple.driver.AppleMuxControl          3.1.32
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.2.8
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.7f2
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.0.4
    com.apple.driver.AirPort.Brcm4331          560.7.21
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.0.7
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleAHCIPort          2.3.0
    com.apple.driver.AppleUSBEHCI          5.0.7
    com.apple.driver.AppleUSBXHCI          1.0.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.3
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.DspFuncLib          2.2.3f13
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.AppleHDAController          2.2.3f13
    com.apple.iokit.IOHDAFamily          2.2.3f13
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleGraphicsControl          3.1.32
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.nvidia.nvGK100hal          7.2.8
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.NVDAResman          7.2.8
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.7f2
    com.apple.iokit.IOBluetoothFamily          4.0.7f2
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.4
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.4
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.0.7
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.0.7
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.5
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro10,1, BootROM MBP101.00EE.B00, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f28
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.21)
    Bluetooth: Version 4.0.7f2, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM256E, 251 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 6

    Welcome to Apple Communities
    Open > http://codykrieger.com/downloads/gfxCardStatus-2.2.1.zip Select the NVIDIA GeForce GT 650M and see if the kernel panic ocurrs. If not, it's a driver issue

  • Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Welcome to Apple Support Communities
    Press Shift key on boot and purchase OS X 10.8

  • I have just installed Mountain Lion and received a message that "speech Synthesis Server.app could not be opened because it is damaged or incomplete", please advise me what to do now.

    I have just installed Mountain Lion and received a message "speech synthesis server.app could not be opened because it is damaged or incomplete", please can you advise me what to do next? Thanks

    Something went wrong with your upgrade.
    Back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it.

  • Have lion on 5 year old 20" mac desktop. tried to download and received a message mountain lion not compatible with this computer. anyone else have this problem?

    have lion 10.7.4 up graded from tiger 10.5.8. tried to download mountain lion but received a message that mountain lion is not compatible with my computer. anyone have this problem or suggestion?

    It's actually not the chip... it's the drivers for the video card. this is what my friend who does IT work said.
    "The drivers for your Mac's video card are not 64bit compatible even though the computer itself is. Mountain Lion has done away with all 32bit OS components so it only runs on full 64bit MAcs now"
    So even though I updated my video card to a newer version and my computer itself is 64bit... apple didn't create a driver for it that was 64 bit. My hardware is fine for this update and the chip can handle it. It can handle all my 64 bit programs just fine. It's apple forcing me to update and buy a new expensive computer. So much for long lasting computer... they last long but they won't be supported very long.
    Why not release a version of mountain lion that supports 32 bit graphics alongside the 64 bit? Wasn't that what grand central was going to accomplish? This is rubbish.

  • Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

    i upgraded to Lion and now itune upgrade will not install (error message appears)

    iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

    Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

    Try following the instructions here: [[Firefox hangs]]

  • "Firefox is already running but is not responding" error message and recent firefox update

    "Firefox is already running but is not responding" error message is continuously popping up after the recent firefox update. I have nearly exhausted every possible solution to the problem as seen from the support page for this error message. I know someone who has the same issue on their computer and it also started right after the recent big update. Does the update have anything to do with this reoccurring issue? Is anyone else having this problem? Any other ideas on how to fix it? It would be great to get some help.

    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.
    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

  • "Not Found" Error Message Problem

    Hi All!
    I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
    Some Specs that might be helpful:
    FCP HD 4.5
    Dual 2 GHz PowerPC G5
    2.5 Gigs DDR SDRAM
    Raid 1 with 134.6 Gigs Available Space
    SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
    A Few JPGs of Photoshop Titles
    I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
    Emily

    They were originally on a PC. That quite possibly could be it.
    I just checked all the titles again and they are all RGB.
    Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
    I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
    I was just hoping that someone might have had this problem and knew what to do.
    Thanks for your help!

  • TS1544 "keychain not found" error messages pop up all the time, please help!

    Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
    Verification started
    Checking keychain configuration for Lee (user ID=501)
    Home directory is /Users/Lee
    Checked login keychain
    Error: login keychain not found
    Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
    Checked default keychain
    Checked keychain search list
    Problems were found; you should choose the Repair option to fix them
    Verification failed
    Can anyone help?
    Thanks

    Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time  Machine backup.

  • AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

    AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
    Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
      http://support.apple.com/kb/HT4700
    I have a W2K3  server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
    Any help greatly appreciated,
    Cheers,
    Ian

    This may work for you:
    http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

  • Package does not exist error-message

    When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
    I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
    Has anyone encountered this or any ideas?
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.util.* ;
    import java.io.* ;
    import java.sql.* ;
    import com.ericsson.snf.mps.mppapi.mtlr.*;
    The error messages come from the 'import com.ericsson.snf.........' statement.
    I am trying to integrate ericsson software, into my application.
    Thanks,
    java-mobile-user

    That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

  • In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost.

    In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.

    Welcome to the support forums.
    Please ask this question in the Mac App Store forum where they can better assist you.

Maybe you are looking for