Mountain lion update will not go away

The update for Java OS X 2013-004 and Thunderbolt Firmware Update 1.2.  I have updated it 3 times and when restarted it still shows up in my updates and will not go away.  How do I fix this.

Thunderbolt Firmware Update 1.2: Keeps reappearing

Similar Messages

  • Mountain Lion installer will not let me choose my Lion Partition as an install location

    Mountain Lion installer will not let me choose my Lion Partition as an install location.
    Any ideas why?

    Again, why will the Mountain Lion installer not allow me to select my Lion partition as the location for the install?
    Good question. That's the main way it's supposed to be installed. You shouldn't even need to choose a partition. You purchase Mountain Lion through the App Store, it downloads to the Applications folder and automatically begins the installation on the drive where Lion or Snow Leopard resides as soon as the download is complete.

  • After installing Mountain Lion, contacts will not sync

    After installing Mountain Lion, contacts will not sync to iphone 3G

    I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

  • I had to reformat my early 2008 MacBook and have now lost Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

    Help please!
    I had to reformat my early 2008 MacBook and have now lost my pre-installed Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good condition but now useless to me.

    ^ hahahahahahaha^
    from da uk

  • Mountain Lion Network will not connect

    Mountain Lion Network will not connect to adobe.com on my WiFi network.
    While my iPad and iPhone will connect using my WiFi network.
    I have tried to connect using 8 different browsers that I have and get the same results.

    eth0 Link encap:Ethernet HWaddr 5C:AF:04:82:2D:3A
    inet6 addr: fe80::5eaf:4ff:fe82:2d3a/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:12126 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7487 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:11150781 (10.6 Mb) TX bytes:1005897 (982.3 Kb)
    Interrupt:21 Memory:febe0000-fec00000

  • LR4 4.2 (Mac Mountain Lion OS) will not import of CF card

    My LR4 has stopped importing from my CF card (it will import from other SD and hard drive formats, but not the CF card).
    I have tried other readers, as well as creating a brand new catalog (while importing old catalog), then tried to import from CF card to new catalog and it still hangs in the import window.  The import bar does not move and no photo thumbnails show up. 
    Work arounds that work on the same machine with the same hardware:  I can open LR3 and import photo's to the hard drive, then I can log into LR4 and import from hard drive and just "add" the LR3 imported photo's to my LR4 Catalog.  This is the only way I can get LR4 to import the photo's from my CF card.  Like I said, the reader is not the issue, the card is not the issue, it's LR4!  This is frustrating and I have no reason why it stopped.  I haven't installed any new programs or removed any programs in a long time and yes it did work well after mountain lion install. 
    I have a late 2011 IMAC with mountain lion installed, 16 gig RAM and 3.4 Sandy Bridge CPU.  Help, thanks
    -Ry
    [email protected]
    PS.  Ideally I want to remove my LR3 and all it's catalogs as I move into 2013 but now I am afraid too because it's my only saving grace right now.  I have seperate catalogs from 2000 thru 2012 in each version of LR so as you can imagine my hard drive is getting a bit full.  My 2012 has nearly 13.5k photo's in it.. hoping that's not the issue.

    Jesse,
    Check this out and see if it helps : http://chadthompson.me/2012/07/26/a-mountain-lion-ate-my-jdeveloper/
    -Arun
    Edit : And this : https://blogs.oracle.com/shay/entry/installing_jdeveloper_on_mac_os

  • OSX Mountain Lion "Messages" will not let me sign in...

    I cannot for the life of me get messages to work on the new OSX mountain lion.  I keep getting this alert when trying to sign in:
    "COULD NOT SIGN INTO iMESSAGE. The server encountered an error processing registration.  Please try again later."
    Any ideas?  I have restarted both my macbook and macpro, reset my apple ID password... no love.

    I have spent over 40 hour walking through this issue with Apple senior tier engineering support with Apple for Mountain Lion and Developer support, plus the Apple store genius bar and their high level connection, Getting no where trying to resolve same issue it seems.  The only thing I can get to work is AIM to video chat or share screens.  Messages accounts have added 5 other account .mac accounts and I can not sign into any of them or remove any of them either.  Over time I have had a .mac address that was made into a mobile me address that was then converted into a .mac email again and became a cloud account. And I have a developer account that has a separate name that works with iTunes connect.  When I try to manage accounts to change the password of one it corrupts the the password of the other. When I try the change emails of one it says it is in use by the other.
    There are 2 accounts for the iTunes and App Store. 
    Messages is choking on my 2 accounts and there is a definite unresolved problem with the cloud in regard to them it seems.

  • Mountain Lion - mail will not allow me to add to iphoto

    I downloaded Mountain lion and I saw that there was an iphoto library problem, but all my photos are there.  However, when people are sending me photos, I can no longer use the "add to iphoto", it will allow me to drag photo into iphoto.

    That is right - it is a bug - report to Apple and work around until an upgrade resolves it
    LN

  • HT203421 Mac AppStore Updates will not go away after installing them

    I've updated them countless times to try and get rid of them, I've tried the majority of "solutions" others have had, and it is not working. Been going on for about 2 months. Currently running OS X 10.9.1, although the issue happened on 10.9 as well. My computer is the 2013 MacBook Air. It's getting really frustrating :/

    What you are seeing is normal and we are all seeing the same thing. I have read that the updates will disappear after a couple of weeks and that seems to be what I am seeing now on my iPad.

  • Mountain lion download will not resume

    Finally figured out how to get the program to downlaod but my connection in africa is super slow am trying to downlaod it in increments, downloaded a bit yesterday, came back today to continue but no matter how many times i click resume in the task bar or in the purchases window nothing happens and still says "paused". frustrating.

    If you properly pause the download, it should be able to resume without any problem.
    When I downloaded Mountain Lion, I paused and resumed hours later without any problem. But when it reached 95% of the download, my internet connection dropped for like 1 minute, and when it came back, the download restarted from zero.
    So as long as the internet connection is not dropping during the download, you should be able to resume.

  • After installing mountain lion facebook will not load on iMac

    Any helpers Please !!

    I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

  • Two times Mountain Lion Update was not succesfull

    I use e MacMini, one year old, with max workingspace, each time, i use the update information, the update ended with the notice, installation not succesfull
    or so......, now i'm not shure, is the installatin correct or not? This to updates was been successful on a MacBook Pro...
    What the **** is the different by my Mac Mini?
    Please give me an advice!
    bernix

    Also, before intalling the update... Make sure to repair you user permissions. Go to Finder> Applications> Utilities> Disk Utilities and look for the Disk Utility Application. You can also call up Launchpad and start typing with your Keyboard "Disk Utility". Once you open the application, click the Macintosh HD in the sidebar and then move to the First Aid tab. Click the option labeled "Repair Disk Permissions" and let the process work until it is finished. After that, reboot your computer and then proceed to open the OS X 10.8.2 Combo Installer that you downloaded from the link I gave you in the post above.
    Hope that helps!

  • After mountain lion update SMTP not working

    Hello all, so, I've updated my mac mini and I have a lot of problems, one of them is the SMTP service no working, so I can recieve mails but I can't send them. Here are the last lines of the mail log.
    Sep 19 07:22:04 orbit83.com postfix/trivial-rewrite[403]: warning: virtual_alias_domains lookup failure
    Sep 19 07:24:10 orbit83.com postfix/trivial-rewrite[455]: error: open database /etc/postfix/virtual_users.db: No such file or directory
    Sep 19 07:24:10 orbit83.com postfix/trivial-rewrite[455]: error: open database /etc/postfix/virtual_domains.db: No such file or directory
    Sep 19 07:24:10 orbit83.com postfix/trivial-rewrite[455]: warning: hash:/etc/postfix/virtual_users is unavailable. open database /etc/postfix/virtual_users.db: No such file or directory
    Sep 19 07:24:10 orbit83.com postfix/trivial-rewrite[455]: warning: hash:/etc/postfix/virtual_users: table lookup problem
    Sep 19 07:24:10 orbit83.com postfix/trivial-rewrite[455]: warning: virtual_alias_domains lookup failure
    Sep 19 07:29:38 orbit83.com postfix/smtpd[756]: error: open database /etc/postfix/virtual_users.db: No such file or directory
    Sep 19 07:30:55 orbit83.com mail_groups[806]: sleeping for: 1 hour(s)
    Sep 19 07:32:26 orbit83.com postfix/smtpd[856]: error: open database /etc/postfix/virtual_users.db: No such file or directory
    Sep 19 07:41:50 orbit83.com postfix/smtpd[1138]: error: open database /etc/postfix/virtual_users.db: No such file or directory
    When using the mail.app in my laptop it always tells me to check my smtp details and using the mail in my iphone it says: "The recipent xx was rejected by the server"
    If you need more details please let me know.

    Hi no real idea on this, but many Network connectivity issues have been solved by this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Mountain lion download will not start

    Hi
    I commenced a download of ML last night, but my internet connection was broken about 1/3 into the download.
    On trying to recommence, I am getting 'waiting' status on the ML icon in Launch Pad.  I have restarted my iMac, and attempted a recommencement of the download with no luck.
    Can anyone suggest a strategy please? 
    Regards - Stan

    Use your current Time Machine to restore your entire OS, or recent bootclone.
    if non of the above
    Restart hold ing the Command and R keys down
    Recovery http://support.apple.com/kb/HT4718
    reinstall your Lion
    and try again

  • Mountain Lion AirPlay will not recognizing Apple TV after sleep

    AirPlay mirroring using my MacBook Air works great; however, after the MacBook Air awakes from sleep the Apple TV icon in the menu bar is gone and I have to restart.
    Any ideas?

    Solved.
    I should have turned off ipv6 feature from the mac. It solved the problem.

Maybe you are looking for

  • How do you boot from an external drive when internal drive is dead?

    The internal drive is dead, but I have a complete dupolicate on my fire-wire external drive. I think I remember reading that there is a combination of keys to press down when starting to allow one to choose which drive to use as a startup volume. As

  • Do i need a network card to install and run a local java web server

    Friends, Do i need a network card in my computer to install and run a local Java Web Server or any Web Server.

  • Default csv format

    IN Apex the default format for csv file type is 'Microsoft Office Excel Comma Separated Values File. IS there a way to change it to CSV (Comma delimited) (*.csv) The first one is the only option showing in Apex, the second option is what you get if y

  • My j2me program hangs --need help

    hi.my program hangs whenever i run my midlet and i get a message like this Warning: To avoid potential deadlock, operations that may block, such as networking, should be performed in a different thread than the commandAction() handler. below is my co

  • Displaying Variables in Header?

    Any suggestions for how to show variables in the header? For my applications they are some items I would always like to display. I tried putting #P2_PERSON_ID# in the template header area, but this was not interpreted. Thanks! -Erik