Mountain Lion - Using multiple Airport Express for music

I've been using Airfoil to play non-iTunes audio to the three Airport Express units in my house, but the audio quality is lacking. I was happy to see that Mountain Lion (I am using 10.8.4 on my Macbook Pro) will stream non-iTunes audio to AE units, but only one at a time.
Does anyone know how to get Mountain Lion to stearm audio to multiple AE units in sync?
I see there is an app called "Airwaves" designed to do this, but users have very mixed experiences. Is there perhaps a better app out there?
Any suggestions would be appreciated. Thanks.

Sorry - I led you astray unnecessary in my last posted message. The reference I provided was for setting up a remote base station. That is not applicable to your situation, so please ignore.
In your case, you want to use the Airport Utility to configure each Airport Express so that it "join" (and not "extends") your existing wireless network.
What I suggest you do is:
1. get each Airport Express into a known default state by doing a factory default reset per these instructions. Hold down the reset button for 10-15 seconds, until you see four green flashes in rapid succession
2. put all Airport Express devices, and the wireless Mac you are using to configure the Airport Expresses, into the same room as the wireless router you are using
3. configure one Airport Express at a time, and as I said above use the Airport Utility to configure each Airport Express to "join" the existing wireless network - ie select your Airport Express device as shown in the Airport Utility, click the "Continue" button (not the Manual setup button), and follow the instructions. The name of the wireless network you are joining is the same as the name of the wireless network your existing wireless router is creating. Make sure you also specify the same security protocol (WEP/WPA) and wireless network password as your Mac requires to connect to your existing wireless network.

Similar Messages

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

Love airport express for music throughout the house but it goes dead from time to time

Airport Express for music just goes dead
is there a quick fix to this

You don't really want 2 wireless networks. After you get the Linksys set up, you will want to configure the AirPort Express (AX) to join the wireless network created by the Linksys base station. You will then have one wireless network that provides Internet and wireless music streaming.
Use the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode to configure the AX.

I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

You can just unplug the express and use the Uverse wireless or ethernet directly to it.

HT3728 I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

Using Multiple Airport Express units to play Music to Multiple Sound System

Goal
- play music on my iMac and in one other sound system(I'am aware of the one
system limit )
- I have multiple Airport Express units(3) for different sound systems and wish
to select the room using iTunes.
Reality
if I reset all the airport express units in the house(3) I can initially see the units. On going through the setup I'am able to configure each unit to be part of my wireless network and get the airport express to power cycle. However after this process only the last AE unit is visable via itunes. If I use the airport utility it can find no units when scanning. If I power cycle one of the non visible units it becomes visable but I cannot play music to the unit and trashes the connectivity to the one working AE unit.
What am I doing wrong ?

Sorry - I led you astray unnecessary in my last posted message. The reference I provided was for setting up a remote base station. That is not applicable to your situation, so please ignore.
In your case, you want to use the Airport Utility to configure each Airport Express so that it "join" (and not "extends") your existing wireless network.
What I suggest you do is:
1. get each Airport Express into a known default state by doing a factory default reset per these instructions. Hold down the reset button for 10-15 seconds, until you see four green flashes in rapid succession
2. put all Airport Express devices, and the wireless Mac you are using to configure the Airport Expresses, into the same room as the wireless router you are using
3. configure one Airport Express at a time, and as I said above use the Airport Utility to configure each Airport Express to "join" the existing wireless network - ie select your Airport Express device as shown in the Airport Utility, click the "Continue" button (not the Manual setup button), and follow the instructions. The name of the wireless network you are joining is the same as the name of the wireless network your existing wireless router is creating. Make sure you also specify the same security protocol (WEP/WPA) and wireless network password as your Mac requires to connect to your existing wireless network.

Connection problems when I use multiple Airport Expresses

I have one Mac that I use to stream music to multiple Airport Express's. Its seems that when I connect to 3 expresses things work fine. If I connect to 4 the sound cuts out on all speakers.
Is 3 the limit or am I doing something wrong?

Yes you can but....
With the apex in the ceiling you may get a signal loss from your main wireless system. To be able to do what you want in a whole home sound system they all need to be on the main wireless system. You also have to plug them in to a wall outlet which may be an issue with your fire regulations with them inside the walls/ceiling. With airplay you have some limitation also. If she has an ios device and likes say pandora she can only do it to one set of speakers/APex. Only itunes from a computer can do multiple/house party sound. I have 2 APex in my house and love them all. If your main wifi is out of range for some of the new APex's you can run 1 cat5/6 (APex is 10/100) and make a new network and bridge the rest to it. As long as your new wire is connected to your main network you will stay on the same network.
So now you get sound and a roaming wifi through out the house. (that's what I did but not in the ceiling.)
Sonus are good but $$$. by then rewire!

Time capsule and Airport Express for music and internet

Hello! I have a time capsule and an airport express. I use the time capsule for back up, extra space (music) and internet connection. Then I use the airport express to play my music wirelessly (it is attached to my speakers via an amp). This set-up used to work fine but not any more... I can play music via the
Airport Express but then I won't have internet, or I have an internet connection via my Time Capsule but then the Airport Express has to be removed. It seems like the Airport Express overrules the Time Capsule when it comes to internet connection, and obviously (as there is no ethernet cable connected to it) that doesn't work. But somehow I can't select the Time Capsule network any more. What am I doing wrong, what happened? I have spent hours searching the internet to find the solution but so far no good. Please help! Thanking you very much!

just leave the TC on it is designed for that.

Using multiple airport expresses to supply music to stereo

I currently have an airport express plugged into my router via ethernet to distribute a wireless network. I want to add another airport express in the lounge room to connect to my stereo. Will this work?

Yes.

Just want to use my Airport Express for airtunes

I have a 2WIRE DSL wireless router/modem that is working just fine. I'm trying to add an Airport Express just to play Airtunes thru my home theater - not to extend my 2WIRE signal. Every time I try to set the AE up it fails on restart. Any one?

Let's double-check the steps necessary to configure your AirPort Express Base Station (AX) to join your 2WIRE wireless network for iTunes streaming.
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing 2WIRE's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Airport Express for music streaming, but not Internet?

I currently connect my PowerMac G5 to the Internet via a direct connection. How do I setup the A/E to stream music from my PowerMac G5 (Airport equipped), without disrupting the existing Ethernet connection?

If you want your G5 to be on the Internet AND stream music at the same time, the AirPort Express (AX) must be connected to your Internet source. The G5 can not use the Ethernet connection for Internet and the AirPort connection for streaming music at the same time.
If you have a wired router but do not have a wireless router, you could connect both the G5 and AX to the wired router.
If you do not have a router of any kind (other than the AX), you could connect AX to the ISP connection and then have the G5 wirelessly connect to the AX.
OR you could connect a wireless router to the ISP connection and then have the G5 and AX wirelessly connect to the router. Alternatively the G5 could be connected to the wireless router via Ethernet.

New AppleTV or Airport Express for music streaming to Receiver

Hello,
I am wondering if it would be better to get a new AppleTV for streaming music to my AV Receiver than my my trusty Airport Express (n). I have always used ethernet cable to link the AExp to the computer and an optical cable for the audio link to the Onkyo 875 AV Receiver.
I was recommending the AExp to a friend yesterday and had say "Hold On!" as I was not sure if the AExp was the best choice anymore, given that the new ATV costs the same price and does video too via HDMI. My main interest is audio, but video is a welcome bonus. All my music is in Apple Lossless format.
Appreciate some feedback to help decide on the best solution.
Regards, Jim.

JimSix wrote:
I don't think the audio quality can be worse (esp. from Apple Lossless), perhaps only better if you are running a HDMI cable from the ATV to the AV Receivers input port (I hope this is the case! Anyone know for sure?). The receiver should have a good DAC, but I believe the ATV (and AE) would use it's own DAC.
I must say the AE has been a wonderful device and people are still amazed after all these years that ALL my music that resides on the computer can be played wirelessly (wired in my case with a 20m long ethernet cable) from our HiFi speakers.
Trust me, the DAC on the AE is nowhere near the quality of CD. All of my Apple Lossless was getting converted with the AE DAC and going to my analog receiver. It sounded tinny, all the mid-range and upper range seemed to be compressed or something, and there was no bass response. Seriously, with a mediocre analog receiver and some affordable but good speakers, you can get incredible sound from a CD. But the AE sounded horrible compared to that. That's why I got rid of the analog receiver and bought a receiver with a DAC. However... the quality hasn't even improved that much, even with using the toslink and comparing to simple 1/8" jack to RCA. I'm pretty disappointed.
This is why I want to know if the AppleTV is literally going to have a better DAC than the AE. That's the only way I can see it sounding better. Either that or getting a separate DAC (because I can't afford a nice digital receiver, they're just too expensive).

Using the USP Port on Airport Express for Something Other Than a Printer

Can you use the Airport Express for, let's say, making a thumbdrive wireless? Or perhaps a wired keyboard wireless?
Will that work?
If not, is there a device that will make a USB product wireless?

You may want to invesitgate the Keyspan USB Server.
http://www.keyspan.com/products/usb/server/
iFelix

HT1515 multiple airport express output to amp

can i use multiple airport express's as ap's and have only the one near my amp output my streaming music through the amp from anywhere on that network even if it is connecting to one of the other airport express ap's?

can i use multiple airport express's as ap's
If by "ap's" you mean Wireless Access Points, then the answer is yes.
and have only the one near my amp output my streaming music through the amp from anywhere on that network
Yes.
even if it is connecting to one of the other airport express ap's?
It would matter how they are interconnected. If you are referring to a "roaming" or "extended" network, then again the answer is yes.

How can I see all devices using my airport express?

Is there any way to see all devices using my airport express for wifi connection?

Open Macinotsh HD > Applications > Utilities > AriPort Utility
Select the AirPort Express and click on Manual Setup
Click directly on the word Wireless Clients about 2/3 of the way down the page to see the MAC Address of each connected device along with the IP address that has been assigned.
You will need to do a bit of experimenation to be able to identify which device is which based on the MAC address.
Disconnect all but one device and note the MAC address. You now know that product that is.
Turn that one off and connect another. You now know what that device is, etc.
If you have 4 wireless devices...and you see 5 connected devices.....you may have an unwanted guest.

Mountain Lion - Using multiple Airport Express for music

Similar Messages

Maybe you are looking for