Mountain lion VPN server not responding

Hi guys. I've been trying to setup my VPN on mountain lion ever since I bought it but with no joy at all! I've followed numerous guides but always get the error
"The L2TP server did not respond"
Having looked at the logs I get the message
"PPTP plugin: unable to bind socket to port 1723 - err = Address already in use
Unable to initialise VPN plugin"
Does anyone have any ideas please
Thank you in advance
Mark

Your L2tp and pptp address range should should be out of the range of each other and outside of the scope of any dhcp or existing fixed IP addresses
The correct ports need to be forwarded to your server if you're behind a NAT device
The correct ports need to be open on any firewall your running
If your connecting via domain name, the domain name has to resolve to your IP address from the Internet
If your connecting via IP address you'll need a fix external IP address

Similar Messages

  • Mountain Lion VPN server "IPCP maximum config-requests exceeded" error

    I have OS-X Server running on Mountain Lion 10.8.4  I had to reinstall the system due to a hard drive failure and ever since reinstalling OS-X server the VPN service has been driving me mad. Every so often without any obviosu reason the service starts failing and comes up with a "IPCP: Maximum Config-Requests exceeded" error. On the client side it looks like Connecting >> Authenticating >> "You have ben disconnected" message. It seems like this happens every time you restart the machine (so after a fresh restart I can NEVER log in at all and get this error) and switching the VPN service off and back on again in Server app gets rid of the problem every time. Then the problem comes back sometimes after a few minutes, sometimes ater a few hours or days even. I have the exact same settings as I did before where it ran without fault for months and would be back up and running after power failures and automatic restarts. I have not found one single thread anywhere where someone could explain what this is and the best solution I have seen so far was to write a script to turn the VPN server off and back on all the time. Could someone PLEASE help me here. Ay help at geting rid of this problem would b very much appreciated!

    VPN not working:
    vpn:vpnHost = "XX.XXX.XXX.XX"
    vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
    vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains = _empty_array
    vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
    vpn:Servers:com.apple.ppp.pptp:enabled = yes
    vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
    vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
    vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
    vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
    vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
    vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
    vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
    vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
    vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
    vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
    vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.240"
    vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
    vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
    vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
    vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
    vpn:Servers:com.apple.ppp.l2tp:enabled = yes
    vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
    vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
    vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
    vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
    vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
    vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
    vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
    vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
    vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = <>
    vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.225"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.239"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
    vpn:Servers:com.apple.ppp.l2tp:L2TP:IPSecSharedSecretValue = "xxxxxxxxxx"
    VPN working:
    vpn:vpnHost = "xx.xxx.xxx.xx"
    vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
    vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains = _empty_array
    vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
    vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
    vpn:Servers:com.apple.ppp.pptp:enabled = yes
    vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
    vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
    vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
    vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
    vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
    vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
    vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
    vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
    vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
    vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
    vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
    vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.240"
    vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
    vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
    vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
    vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
    vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
    vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
    vpn:Servers:com.apple.ppp.l2tp:enabled = yes
    vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
    vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
    vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
    vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
    vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
    vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
    vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
    vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
    vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
    vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
    vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
    vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
    vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = <>
    vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.225"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.239"
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
    vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
    vpn:Servers:com.apple.ppp.l2tp:L2TP:IPSecSharedSecretValue = "xxxxxxxxxx"

  • Mountain Lion calendar and notes sync problems with exchange server via WLAN

    After upgrading to Mountain Lion calendar and notes do not sync anymore with my exchange server via WLAN. There are no syncing problems via ethernet if WLAN is deactivated. Mail works fine with both connection types. Similar problems known? Solutions?
    Thanks for any ideas.

    Exact same issue ... cropped up in the past 2 weeks. Constantly syncing and re syncing. Watching calendar events show up and disappear. Tried all the normal stuff including deleting and re setting up the entire acct ... no luck. It built out the whole calendar correctly ( from what I could tell) and then started to sync again and appointments randomly appeared and disappeared .....

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • When emailing from iPhoto I keep on getting 'server not responded' message.

    Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
    Thank you.

    Marius,
    set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
    iPhoto > Preferences > General
              Email Photos using: Mail
    This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
    For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
    Regards
    Léonie

  • Since I updated to Mountain Lion I can not activate Facetime

    Since I updated to Mountain Lion I can not activate Facetime.  Keep getting "The server encountered an error processing registration. Please try again later."

    Back up all data.
    Take the steps suggested in this support article:
    FaceTime, Game Center, Messages: "There was an error processing registration" when signing in
    Sign out of iMessage:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    Then sign back in with your verified credentials.
    If you get the same error, try resetting the NVRAM.

  • Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

    I could help.
    When exporting to Encore or Premiere, the program block.
    In the Activity Monitor shows me these two errors:
    Adobe QT32 Server (Not Responding)
    PPro Headless (Not Responding)
    Technical Specifications:
    MAC OS X 10.9.5
    Adobe Suite CS6
    graphics card: AJA KONA LHi
    Can you help me please
    Thank You

    Have you checked out this post from Adobe?  I know it says for After Effects but it definitely applies to Premiere too.  We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

  • Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

    Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser.  I have tried restore option also.  This is happening with both Wlan and Data con. too
    Please help...

    I do not really know much about this kind of problem, but i may be your internet connection.
    If you are on your own #G network then:
    Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
    Then wait patiently until you get a good connection and then try again.
    If you are on a nearby Wi-Fi connection then:
    Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
    If all else fails, then you need to contact your provider for assistance.
    Sprint:888-211-4727
    AT&T:?
    Verizon:?

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

    Hello -
    I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
    Thank you for your help.

    Hi Mike603,
    Please refer to the following help document on error " Remote Server not responding".
    http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
    Hope this helps.
    Please let me know in case of any problem.
    Regards,
    Sumit Singh

  • TS4006 Phone deactivated  -  My iphone 5 has on its' own de-activated itself.  It requires my apple id and password to re-activate.  Upon this command, I press next, to which it says: server not responding.  Rendering my phone useless...please help

    Iphone de-activated itself  -  it won't accept the ID and password as it says:  server not responding, rendering the phone useless...please help

    i'm in the same situation. waiting for an answer.

  • I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

    I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
    at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
    Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
    I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • HT204032 I purchased my Macbook Pro in November 2011 and just installed mountain lion but do not have the power nap option.. anyone know why?

    I purchased my Macbook Pro in November 2011 and just installed mountain lion but do not have the power nap option.. anyone know why?

    It is for the MacBook with built in flash storage.
    http://www.apple.com/osx/whats-new/features.html#powernap
    4. Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update.

  • Exchange Server not responding - please try later

    Hi there
    Can anyone please help with my E75.
    I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
    Until a couple of days ago!!!
    Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
    I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
    My problem is that I don’t know where to start.
    Is the problem to do with:-
    My phone?
    Its settings?
    Orange’s servers?
    My work’s servers?
    Nokia’s servers?
    I’m confused – please help.
    Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
    Thanks in advance
    Ian

    hi
    as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
    Yahoo! Search Search:
    Welcome, ksatcw[Sign Out, My Account]
    • Messenger Home -
    • Help
    • Go Back to Yahoo! Messenger
    Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
    Is my “Use Proxies – Enable HTTP Proxy” setting the reason why I can’t sign into the Yahoo! Messenger Beta?
    Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. We’ll get this resolved as soon as possible.
    Email this page Print this page
    Was this article helpful?
    Yes
    No
    Contact Customer Care Click to contact Customer Care for further assistance.
    Top Questions
    • Questions about the closure of Yahoo! Messenger version 5.6?
    • Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
    • How do I install Yahoo! Messenger?
    • How do I configure my firewall/proxy server?
    Yahoo! Messenger crashes when I launch it.
    but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

  • Mail server not responding. Need help how to verify my account

    Mail server not responding. Need help how to verify my account

    There are instructions on this page for how to create a new account without giving credit card details (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
    Unless an account is created via those instructions then credit card details will need to be entered on it before the account can be used.

Maybe you are looking for

  • I need to synchronize color space between Bridge and PSCS3

    Hi-- The only CS3 programs I am running are Bridge and PS. I like to work in Adobe RGB and maintain all my files in that color space. Consequently, I set that color space in PSCS3 (in Edit/Color Settings). However, for some reason I can't nail down,

  • Problems while installing Adobe CS4 on LION ?

    I was trying to install CS4 after I upgraded to LION and the drive does not recognize the DVD anymore.

  • Getting error message while running forms(Forms11g) using port 8888

    Hi , I am facing one issue while running forms.By using http://localhost:9001 forms are working fine. When i use http://localhost:8888 it is showing Internet explorer can not display this page. It seems it has some issue while installing forms 11g de

  • REP 1202 Error

    I am getting REP 1202 REP-1202: ID attribute of rw:id tag is not unique. REP-1202: ORACLE logon not specified. we are using rwservlet with authentication using key map /cgicmd.dat config. the problem is that we are getting only for certain users this

  • Sudden loss of audio in all browsers

    I've tried watching some tutorials within the last few days, and cannot hear the audio. I've tried in Safari and Firefox, both are mute when playing tutorials. This is a pretty new G5 dual-core Power PC, lots of RAM, and today I upgraded FLASH to it'