Mounted DVD image region different to inserted DVD region

Hello,
My DVD is set to 'Region 4' to play Australian DVD's. I created an image of a DVD using the 'DVD/CD Master' image format in order to make a backup DVD.
Issue: When I open it in the standard DVD player software, I'm prompted to change FROM 'Region 1' (which I never chose.) If I re-insert the DVD, it plays without a hitch.
I don't want to start changing regions unless I have to. Can anyone make an informative suggestion?
Thanks,
Carlo

What Király has said is correct so you shouldn't get this message. My guess is that the software you used for creating the backup automatically designated it as region 1 (USA). Why you have to re-insert it to get it to play I don't know.
One proviso to what we've said is that if you bought your Mac overseas the Australian legislation won't apply and you would be caught in the zone change limitations.
Neville

Similar Messages

Windows 7 under bootcamp won't mount dvds

Windows 7 under bootcamp will no longer mount DVD disks, whether data ROMs or movies. Audio CDs work fine, don't have any CD-ROMs to test with.
As far as I can tell this happened after upgrade to OS X 10.9.5. Computer is a 2010-vintage iMac, 21.5" with 8 GB RAM and 500 GB hard drive. Previously had Bootcamp 3.2 but upgraded to 4.0 and see the same thing.
When I insert a DVD 1 of 2 things happens:
- spins for a few 10's of seconds then the computer ejects it
- DVD-RW comes up in Windows Explorer, but when I click on it only thing that shows is "desktop.ini" and right-click menu options are only to format or burn something to the disk. I.e., is seen as a blank DVD RW even though it's a commercial DVD.
Most post on similar issues are for cases where the drive doesn't show up at all, but that's not the problem I'm having.
Would appreciate any help on this; it's not acceptable to have such SW issues on a computer that still otherwise works fine. Apple wants to charge me $$ for even an online chat session since it's out of warranty, and I don't want to lug to the store.

if it works in OS X then I would ask here Boot Camp
if the issue is also in OS X then likely it's a hardware defect with the optical drive

Installed MediaCentral--now P'Book won't mount DVDs

Hi there,
Just installed the latest version of MediaCentral (http://www.equinux.com/us/products/mediacentral/index.html) a few hours ago. Unfortunately, I now cannot get my PowerBook to mount DVD volumes. Apple's DVD Player does indeed start up on its own when I insert a DVD (as I have it configured to), but the volume just doesn't appear on the desktop.
I can only surmise that MediaCentral is responsible in view of the proximity in time. I trashed the plist files for both DVD Player and MediaCentral, but there's no change.
Please help! Would be happy to provide more background info, if needed.
Thanks very much for your time,
Nate
PowerBook G4 Mac OS X (10.4.5) 1.67 GHz, 1 GB RAM

Hi, Nate.
The best place to get help with your question is to report it to the MediaCentral folks. See the contact link on their support page. I don't mean to send you somewhere else, but it's their app, they get paid for it, they should support it.
You may simply want to uninstall MediaCentral. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

10.5.6 Update Killed ability to mount DVDs

I updated to 10.5.6 and I can not mount any DVDs even on my external DVD drive. I can Mount Cds and bootcamp can mount DVDs and CDs. Any Ideas I relly can not afford to do a reinstall at this time.\
Thank you

Sorry I can't help, but I understand as I have the same problem

It would be sweet if CMD+DELETE would eject mounted/dvd drives from desktop

As a title already says...It would be sweet if CMD+DELETE would eject mounted/dvd drives from desktop

http://www.apple.com/feedback/macosx.html
You can probably create another keyboard shortcut to eject a disk, if you wish.
Regards.

Create a Multiple ISO mounted DVD

I've seen this done before, where there are several iso's on a DVD and when the DVD loads it will mount every ISO. I really think this is a useful way of condensing several cds or just organizing everything together on one DVD. I was wondering how can I accomplish this?
I already have one DVD that has this, how can I copy this DVD? I tried in toast and it wouldn't copy the DVD. It gave me the error, "unable to mount DVD because it is in use by another application." The only application that was running was toast. Thank you.

Found answer some where else

MacBook won't mount DVDs

My MacBook has suddenly stopped mounting DVDs. The drive will spin up, but the DVD never shows up in the Finder or in other apps (DVD Player, etc.). I've reinstalled (archive and install) the system software AND updated to the latest system (10.4.7 at this point), and still no luck.
Any ideas?
Thanks,
Steven
MacBook Mac OS X (10.4.7) 2.0Ghz Core Duo; 2GB RAM; 80 GB hard drive

Can it play a CD? Run the system profiler utility. See if it can find your drive and what it says about it. I'd suggest contacting applecare.

Mounting iso image

how do I mount an iso image?
I tried :
mount -o loop -t iso9660 ~/Desktop/adobe.iso /mnt
but it gives an error like " No such file or directory" .
I also tried burning the image to CD and inserted it doesn't recognize it.

Kate--
If you want to do it from Terminal, look at hdid:
<pre class="command">hdid image.iso</pre>
I tried it on an ISO I made to burn a DVD-Audio disc and it mounted. It mounts at /Volumes, if that's okay.
And, taking Malcom's advice, if I double-click it, the image mounts on my Desktop...
charlie

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

Image to have mounted .ISO image?

I'd like to use a mounted ISO image (a live image on DVD). I was able to create the VBox image, of course, and if I created a disk it was okay to import, but after import the ISO is no longer mounted. Where does the template live? Is it something I can edit the file on to re-add the ISO before cloning?

This use case has not been covered with VDI 3. We expect more or less to import a ready to go image, that can be directly used as desktop or replicated as template. The mounting of the DVD will disappear after import. Something to work on for a later release.
-Dirk

Mount loop image with name

Peace be upon you all !
when mounting an image (*.iso for example) by this command :
mount -o loop image.iso
or
mount -o loop image.iso /mount_point/
in dolphin file manager in the corner of Devices the name of the mounted image is "Loop Device"
WHAT I NEED is that the name showed there becomes the name of the image
Last edited by fuhrer (2013-11-08 14:25:27)

ewaller wrote:
fuhrer wrote:where r u guys ???
We are here.
Please don't bump.
I had seen your thread and had no idea how to do what you are trying to do. Apparently, others were in the same boat. These are active forums, so I know that if someone had an answer, or a suggestion, they would have chimed in. Perhaps if you would tell us what more you have learned, why you think you can do this, have you seen it on other distributions or environments, or is it just a good idea?
thanks man ...
actually i didn't see this in any other dist but in Windows (something like daemon tools) ,actually i wanted to use "Tell me More " and it needs the DVD to be mounted , this can be normal if it's alone but when you have several ISOs mounted it'll be so hard to choose since the in the file manager "dolphin" is the same (mean: "Loop Device")

PS CS5 Image Display Differs From Used ICC Profile In Win 7

Hi,
on my Windows 7 Ultimate x64 machine, I just calibrated my Dell SP2309W monitor using an i1DisplayPro and basICColor 5, creating a ICC v2 profile (I am aware of the problems under Windows with ICC v4 profiles).
It created the ICC profile and applied it to be used by Windows. I double checked under COLOR MANAGEMENT that the new ICC profile is being used. Although I can see that the new ICC is being used (desktop appearance changes), there are a few issues I am experiencing:
(1.) Windows Photo Viewer
The thumbnails in Windpows Explorer look fine (they DO use the new ICC profile), when I double click a jpeg and open the image it DOES NOT use the new ICC profile. When I click the PLAY SLIDESHOW button (starting the slideshow) in the opened image in Windows Photo Viewer, the images DO use the new ICC profile.
(2.) Internet Browsers
All current internet browser (Firefox, IE, Safari and Chrome) DO use the new ICC profile and display the image correctly.
(3.) Photoshop CS 5
When I open the same image - that Windows Photo Viewer does not correctly displays (according to the new ICC profile) - in Photoshop CS5, I get the same image display that Windows Photo Viewer gives me (when not thumbnail or not in slideshow mode) - it appears to be the sRGB display.
My color settings in PS CS5 are: North America General Purpose 2 > sRGB IEC 61966-2.1.
When I go to View > Proof Setup > Monitor RGB I get the image display using the new ICC profile.
Why does the image look different in PS than my calibrated monitor should output ?
I was under the impression (please correct me if I am wrong), that the sole purpose for calibrating my monitor was to get a uniform display across (ICC aware) applications. Even when one applies different color spaces to a document in PS, I thought the output on my calibrated screen done by the graphic card should always be according to my calibration and the settings in the ICC profile being used.
What Am I doing wrong or what am I misunderstanding ?
Any help or input is appreciated !
Thanks.
- M

Hello,
A note on monitor calibration: calibrating your monitor will not guarentee that every application will display color correctly, it's more of a step along the pipeline, and for the preview part of a color workflow it's the last step. Here's how color translation follows for an ICC workflow when previewing to a monitor:
Image Color Numbers > Document Tag or Workspace Profile > Monitor Profile
For non-color managed applications, if the original document is or isn't tagged with a color profile it will be translated directly to the monitor profile anyway. This is the equivalent in Photoshop of selecting "Monitor" in soft proofing. Selecting monitor in softproofing will bypass the tagged or workspace profile to translate colors directly through the monitor profile.
For most automatic color managed applications (like Firefox), the image will be translated through the tagged profile and then sent through the monitor profile. If the image is untagged or the profile is unrecognized, the colors get sent directly to the monitor profile.
For Photoshop, a tagged document will have its profile respected and then sent to the monitor. An untagged document will be assigned the workspace profile, which acts like a temporary document profile, and then gets sent to the monitor. This is often why users will notice Photoshop behaves differently from other applications. It's usually a case of the workspace coming into play. By default the workspace profile is set to sRGB. You can change this in Edit > Color Settings.
The purpose of the workspace is originally for printing workflows, as a way of keeping consistant color translations when dealing with both tagged and untagged documents. For web output workflows it can be useful for viewing everything through sRGB, which is typical of the average monitor output (not so with newer wide-gamut monitors, another source of confusion...) combined with the fact that originally most web browsers were not color managed. Hence viewing everything through sRGB is pretty close to what most monitors see and what untagged/unmanaged docs will look like.
Monitor calibration is useful only because it brings your monitor output to a "known state". In traditional workflows the monitor was always a middle-man, a preview device which was useful for getting an idea of what the printed output would look like before you print it. Since print colorspaces are often smaller than display spaces, it's feasible and useful to narrow down the monitor/display space and calibrate it to a known state, so that even if it doesn't totally match the print, you'll get used to its differences/limitations and they'll be consistent so long as the calibration is maintained.
For web output, your final output is often another user's computer monitor, which can have any form of behavior (most standard monitors are pretty close to sRGB, or use sRGB as an operating system workspace (default monitor profile). Wide gamuts behave differently, but I'm not sure if there's a particular ICC space that they closely match, or if different wide-gamuts are even that close to each other in their display color spaces.
Hope this helps!

How can i show images from different folders in image gallery

Hi All,
         i have downloaded and executed photo viewer image gallery application.
          in that we r showing images sequentially what we have defined in xml file.
         but i want show images randomly or i want show images from different gallary.
Can any one help me.
thanks
Raghu.

WaqarLFC7 wrote:
On Windows:
Ctrl + click on the songs you want to group - then right click and click get info and it will ask you if you want to get info for multiple items click YES then under album name it whatever you want and them songs will be grouped into 1 album.
Mac:
Same procedure but hit SHIFT instead of CTRL.
Actually, it's right click or ctrl click, same as windows.

How can i export a series of images in different aspect ratios to the same height

How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
Thanks

Yes, you can but there is a trick to it.
In the Export Dialog under <Image Sizing> select Widdth & Height.
Then enter 750 pixels for Height.
Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
When you then export all image will have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

How to save an image in different format

i want to save an image in different format (as .jpg ,.gif, .tiff, .png, .bmp) using save dialog box , where format should come in drop box menu "Save as type" in save dialoge box.what to do.???????plz any one suggest me .........

alok_raj wrote:
i want to save an image in different format (as .jpg ,.gif, .tiff, .png, .bmp) using save dialog box , where format should come in drop box menu "Save as type" in save dialoge box.what to do.???????plz any one suggest me .........1) Spell words properly. That word is 'please'.
2) Fix your sticky keyboard for the '?' and '.' keys. Only one of those characters is generally needed to denote a question or the end of a sentence. Two or more often denotes a dweeb.
I might come back to your question later, assuming I can actually bare looking at that mess long enough to figure out what you want.

Mounted DVD image region different to inserted DVD region

Similar Messages

Maybe you are looking for