Mounting 2013 21.5 inch imac
Is there any way to mount my imac to a wall. I dont want to buy the one with it already fitted though because i already have the imac and cant return it.
base 2013 21.5 inch model
I just checked further and read at OWC (macsales.com) that although the 21" is pretty much sealed, they found the RAM not actually soldered, but the screen has to be pried off (it is glued on) and the logic board removed. So, it may be doable, but it is not easy and most likely not worth the money as Apple charges far more for RAM than third parties, so the cost would most likely be a bit prohibitive.
Similar Messages
-
Spinning beach ball woes on 27 inch iMac
We have a mid 2010 27 inch iMac (and also a late 2010 13 inch MacBook Air, from which I am writing this post). About 6 months ago it was starting to get spinning beach balls, which I attributed to not having updated the OS (then 10.7). Having upgraded the Air to Mavericks with success, I also upgraded the iMac to Mavericks, and the beach balls got much, much worse, rendering the thing nearly unusable. I cannot for the life of me figure out what the issue is, particularly because the Air, which is about the same vintage, is working great under the same setup. Can someone who has not been staring at this problem for 6 months help?
Here's what I've got:
As I mentioned, mid 2010 27-inch iMac, 1TB hard drive, about half-full, backing up to a 2 TB Time Capsule.
We have two wifi networks to cover the whole house; one is integrated with the cable company's provided router and sits in the basement, and the other is the Time Capsule hooked up to the cable company's VoIP router upstairs. Because you cannot use the Time Capsule to extend an existing network if it is not an Apple network, I resorted to setting each wifi network up independently (separately connected to ethernet). My Air navigates this just fine, as do our iPads/iPhones, and I don't notice a speed difference between the two networks (assuming I have equally good reception wherever I am).
Notably, the Time Capsule seems to randomly stop broadcasting wifi every now and then (at intervals of a few days to a couple weeks), which requires a restart to get it working again. (This could be totally unrelated.)
The iMac was at 10.7 when the beach balls started; upgrading to Mavericks made the slowness/beachballs worse. As I noted, Mavericks did not cause any trouble with the Air.
The beach balls seem to coincide with a complete stall in everything the computer is doing. After the stall ends, the computer can be fairly speedy, so it's as if it pauses for several seconds to a minute or so to think very hard, and then goes back to its business.
There is usually a slight improvement if I shut down and boot up again, but it gums up pretty quickly.
Here's what I've done:
Started with 4GB RAM; added another 8 (total 12) after this all started. Equally bad before and after.
Stared at Activity Monitor and Console for long periods of time while watching for beach balls to try to detect a pattern.
In Activity Monitor, memory pressure is fine (esp. now that I added 8 GB), no swap used. The two worst offenders under CPU usage seem to be kernel_task or WindowServer, but they are not always monopolizing the CPU at the times when it is stalled.
In Console, the main two patterns seemed to be a frequent WindowServer "updates forcibly disabled" error, and what seemed like a constant browsing for wifi connections even though the computer was already connected to wifi. However, I couldn't figure out what either of these meant or what might be done to fix them.
Used disk utility, repaired permissions, verified disk, etc. - everything was ok, although some permissions were repaired.
Used third-party utilities, Onyx and iDefrag, to try to verify disk and clean things up. No significant problems detected, and no improvement.
Various other methods of cleaning up -- eliminating old software or files that aren't being used, emptying trash, taking extra files off the desktop, etc. In particular, having read that Mail might have issues handling Google accounts, I eliminated a heavily-used Google account from Mail and got a separate, lighter-weight third-party app to handle that account. That did seem improve things at first, but we seem to be back to slowness and beach balls again.
Final, last-ditch effort: backed up and then erased hard drive and (after another Disk Utility verify - still fine) did a clean install of Mavericks.
It took several attempts to download the installer using the Time Capsule network (kept stalling); switched to the other (non-Apple) wifi network and it downloaded and installed fine.
However, after the clean install, although it was not nearly as slow as before, amazingly, I still had spinning beach balls and hanging without having installed anything other than the OS.
I made several attempts to get into the backup to selectively reinstall files. Could not mount backup using Time Capsule -- option-clicking and selecting "Browse Other Backups" did not actually get me to the other backup. Using Migration Assistant, could not get the backup to load, or the loading was taking an inordinately long period of time, so I gave up. (Also, every time I tried to quit Migration Assistant to try to discover the problem with the backup loading, it hung and I had to hard-restart.)
So, since the clean install did not seem to fix the problem, and I was starting to worry about not being able to get to my backup, I have gone back to just restoring from the Time Capsule. It's telling me this will take over 200 hours.
The one thing I haven't tried is shutting down the computer, lugging it upstairs, and connecting it to Time Capsule via ethernet, at least for the restoration. I will do this if I leave the computer overnight and it's still not done in the morning.
I've done much searching of these discussion boards, and tried everything that seemed like a possible culprit. What am I missing? (Other than ditching this computer and buying a different one?)We have a mid 2010 27 inch iMac (and also a late 2010 13 inch MacBook Air, from which I am writing this post). About 6 months ago it was starting to get spinning beach balls, which I attributed to not having updated the OS (then 10.7). Having upgraded the Air to Mavericks with success, I also upgraded the iMac to Mavericks, and the beach balls got much, much worse, rendering the thing nearly unusable. I cannot for the life of me figure out what the issue is, particularly because the Air, which is about the same vintage, is working great under the same setup. Can someone who has not been staring at this problem for 6 months help?
Here's what I've got:
As I mentioned, mid 2010 27-inch iMac, 1TB hard drive, about half-full, backing up to a 2 TB Time Capsule.
We have two wifi networks to cover the whole house; one is integrated with the cable company's provided router and sits in the basement, and the other is the Time Capsule hooked up to the cable company's VoIP router upstairs. Because you cannot use the Time Capsule to extend an existing network if it is not an Apple network, I resorted to setting each wifi network up independently (separately connected to ethernet). My Air navigates this just fine, as do our iPads/iPhones, and I don't notice a speed difference between the two networks (assuming I have equally good reception wherever I am).
Notably, the Time Capsule seems to randomly stop broadcasting wifi every now and then (at intervals of a few days to a couple weeks), which requires a restart to get it working again. (This could be totally unrelated.)
The iMac was at 10.7 when the beach balls started; upgrading to Mavericks made the slowness/beachballs worse. As I noted, Mavericks did not cause any trouble with the Air.
The beach balls seem to coincide with a complete stall in everything the computer is doing. After the stall ends, the computer can be fairly speedy, so it's as if it pauses for several seconds to a minute or so to think very hard, and then goes back to its business.
There is usually a slight improvement if I shut down and boot up again, but it gums up pretty quickly.
Here's what I've done:
Started with 4GB RAM; added another 8 (total 12) after this all started. Equally bad before and after.
Stared at Activity Monitor and Console for long periods of time while watching for beach balls to try to detect a pattern.
In Activity Monitor, memory pressure is fine (esp. now that I added 8 GB), no swap used. The two worst offenders under CPU usage seem to be kernel_task or WindowServer, but they are not always monopolizing the CPU at the times when it is stalled.
In Console, the main two patterns seemed to be a frequent WindowServer "updates forcibly disabled" error, and what seemed like a constant browsing for wifi connections even though the computer was already connected to wifi. However, I couldn't figure out what either of these meant or what might be done to fix them.
Used disk utility, repaired permissions, verified disk, etc. - everything was ok, although some permissions were repaired.
Used third-party utilities, Onyx and iDefrag, to try to verify disk and clean things up. No significant problems detected, and no improvement.
Various other methods of cleaning up -- eliminating old software or files that aren't being used, emptying trash, taking extra files off the desktop, etc. In particular, having read that Mail might have issues handling Google accounts, I eliminated a heavily-used Google account from Mail and got a separate, lighter-weight third-party app to handle that account. That did seem improve things at first, but we seem to be back to slowness and beach balls again.
Final, last-ditch effort: backed up and then erased hard drive and (after another Disk Utility verify - still fine) did a clean install of Mavericks.
It took several attempts to download the installer using the Time Capsule network (kept stalling); switched to the other (non-Apple) wifi network and it downloaded and installed fine.
However, after the clean install, although it was not nearly as slow as before, amazingly, I still had spinning beach balls and hanging without having installed anything other than the OS.
I made several attempts to get into the backup to selectively reinstall files. Could not mount backup using Time Capsule -- option-clicking and selecting "Browse Other Backups" did not actually get me to the other backup. Using Migration Assistant, could not get the backup to load, or the loading was taking an inordinately long period of time, so I gave up. (Also, every time I tried to quit Migration Assistant to try to discover the problem with the backup loading, it hung and I had to hard-restart.)
So, since the clean install did not seem to fix the problem, and I was starting to worry about not being able to get to my backup, I have gone back to just restoring from the Time Capsule. It's telling me this will take over 200 hours.
The one thing I haven't tried is shutting down the computer, lugging it upstairs, and connecting it to Time Capsule via ethernet, at least for the restoration. I will do this if I leave the computer overnight and it's still not done in the morning.
I've done much searching of these discussion boards, and tried everything that seemed like a possible culprit. What am I missing? (Other than ditching this computer and buying a different one?) -
27 inch imac's hard drive has failed.
Hi guys my 27 inch imac's hard drive has failed and I need to replace it. it was a seagate 1tb ST31000528AS. Any suggestions what to replace it with.
No worries,
Any SSD should work I recommend either OWC or Crucial SSDs, but you will still need an aftermarket optical drive temp sensor or the software to slow the fans down.
I recommend:
For software: http://exirion.net/ssdfanctrl/
Temperature sensor:http://www.ebay.com/itm/Apple-iMac-21-5-A1311-Mid-2010-Optical-Drive-Temp-Sensor -Cable-922-9624-/151521177860?
You will also need a bracket to mount it on-http://eshop.macsales.com/item/Newer+Technology/ADPTADRV/
iFixit guide: https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Rep lacement/1634
You will just need to swap out the HDD bracket with the above one mentioned.
Good Luck
PS: If you are interested in installing it in the 3rd SATA slot or replace the optical drive with an SSD please say so -
HT3924 using a 24 inch imac as a monitor
Can I use a 24 inch (early 2009) Imac as an additional display with the latest (2013) Imac??
Welcome to the Apple Support Communities
Only 27-inch iMacs and Mid 2011 and newer iMacs can be used as a monitor. However, you can use ScreenRecycler to use your 24-inch iMac as a monitor, but it works through the network, so it will be slow -
Can the 21.5-inch iMac height be reduced to 44.4cm by tilting screen?
Can the 21.5-inch iMac height be reduced to 44.4cm by tilting screen backwards? The spec. height is 45.0cm, my desk opening is 44.5cm...
You might want to go for a Configure to Order version that has a Vesa Mount on the back and then use a short wall or desk mounting arm.
see > iMac – Buy iMac with Built-in VESA Mount Adapter - Apple Store (U.S.) -
How do I use an external monitor with 21.5 inch iMac?
I have a brand new 21.5 inch iMac and am trying to hook it up with an older 20 inch Mac cinema via Thunderport. Do I need a special cable. I saw none at my local Apple store. or will it work at all?
Use a Mini DisplayPort adapter for that monitor type.
(59966) -
Hi there,
I'm trying to work out if there is any way that I can use my late 2009 21.5 inch iMac (running OS X 10.6.8; mindisplay port) as an external or second monitor when connected to my early 2011 13" MacBook Pro (OS X 10.6.8; thunderbolt).
From what I've read online, I gather that I cannot simply connect the two with a minidisplay port to thunderbolt cable, as the iMac does not support target display mode. I know I can 'share screens', but this doesn't give me much of an improvement on size compared to just using my MacBook.
Are there any other potential work arounds I might have missed? Any suggestions (or even conclusive answers to suggest I'm wasting my time by continuing to think about it!) would be much appreciated.
Many thanks!Sorry but no, you are asking about Target Display Mode and the 2009/2010 21.5" iMacs did not support that, only the 27" iMacs did. You can read up on TDM in Apple's Target Display Mode: Frequently Asked Questions (FAQ)
-
2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.
You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV. -
What cable do I need to connect my 27 inch iMac to my Cinema Display
What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?
It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
Good luck,
Clinton -
I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?
Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway? -
How can I connect an external monitor to the new 27 inch iMac?
I have an old PC monitor that I want to connect to my new 27 inch iMac, it's the latest edition, the one that doesn't have any mini display ports.
All I have are four USB 2.0 ports and two Thunderbolt ports. No mini display port of any kind. So is there an adapter for me? My old monitor can use either VGA or HDMI and I'm not really fussed which one I use. A link would be most helpful, surley that are more people with the same problem.If the monitor supports vga and hdmi you probably what to use the digital hdmi over the analog vga. You need a mini-displayport to HDMI adapter. For this application mini-displayport will work when plugged into a thunderbolt connection (TB is sort of a superset of mini-displayport, the plugs and sockets are physically compatible).
Here's examples of each kind of adapter:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
Mini DisplayPort | Thunderbolt to VGA Adapter -
My G RAID thunderbolt drive mounted just fine onto my iMac this morning. I copied some files from another drive onto the RAID drive, ejected it, and worked on another project for a few hours. When I went to mount the RAID drive again so I could work on the project associated with the drive (I'm a freelance video editor) it would not mount. I've tried everything. It boots up perfectly fine, the drive seems to have no hardware problems. It shows up on Disk Utility and in System Information but is listed as not mounted. I've verified it on Disk Utility and it tells me everything with the drive is fine. I've tried all the various restarting my iMac, ejecting and reconnecting the drive, shutting down the whole system and starting it back up, relaunching Finder, and nothing works. Starting to panic because this is a client's drive, I have no idea what the issue is, it worked perfectly fine only hours ago, nothing happened to it in the meantime, and I fear continuously connecting and ejecting it because I don't know what the state is with the data and if this is only going to further aggravate the problem. I've been up and down Apple and g-raid forums and can't get a straight answer anywhere. I need to know that the data is safe, the drive is undamaged, and how to get it to mount on my iMac. Can anyone out there help me with this??
welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
JeanThe other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
Jean -
Leopard in the very latest 21 inch iMac
Hi all,
can I use Snow Leopard in the very latest 21 inch iMac - I have some old imaging apps that I cannot replce
Message was edited by: getegete wrote:
Hi all,
can I use Snow Leopard in the very latest 21 inch iMac - I have some old imaging apps that I cannot replce
Old imaging apps running in Snow Leopard Server installed in Parallels for use in Mavericks:
[click on images to enlarge]
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564 -
This Lion wireless issue has become more than just an irritation, so much so, my wife has resorted to sitting in front of a 27 inch imac with a 300 dollar Walmart Windows computer to get the bills paid and use the web. And yes, there is not a fix out there I haven't tried over the last year or so, some worked and some didn't, but all were temporary at best. Same issue with my Macair, I wonder if its a hardware issue, like the video card in my 2006 MBP, it went out after the warrenty and then I found out there was a calss action suit going on over it, unfortunately Apple wouldn't cover it and wanted 7oo bucks to fix it, sold that as parts.
While i really like me Macs, I own three, I may have to bow out and stick with LINUX, that has yet to let me down, anyone know if Mountain will fix this issue? or are we all just waiting for defective WiFi cards to fail at our own expense, PS, got three Macs for sale.Sounds like you're getting kernel panics, which are usually, but not always, caused by hardware problems, with memory being one of the regular culprits.
First thing I would do is to get our your original OS X disks, insert the first one (should say 'AHT version x.x' in small print on the label - if not, find the one that does), and reboot holding the Alt key down. Choose the Apple hardware test, and when prompted, choose the extended test. If you have either of the TechTool programs, they can do similar testing. Does that identify any hardware issues?
Next, I'd download rember from http://www.kelleycomputing.net/rember/ . This is a memory testing program that you can set to run overnight. Does it come up with any errors? If so, try resetting your memory card(s) by removing and putting back into the computer. Rerun memory test.
This FAQ will provide other details: http://www.thexlab.com/faqs/kernelpanics.html
Maybe you are looking for
-
Is there a way to save Pages documents so they can be opened with MS Word?
Hi, I have been a PC user my whole life, but just recently purchased a Mac. I bought an iMac and absolutely love it! I'm still trying to figure everything out though. I just purchased iWork 09, but it hasn't arrived yet, so I'm using the trial versio
-
The Creative Zen Touch Movement: Active Creative Us
Who out there wants a skin for their Creative Zen Touch? Who is tired of the monopoly that Vaja cases has and forces you to buy their horrific case for 70 Big Ones? Who is tired of the Creative Case that is included and is extremely bulky and doesnt
-
My apple id is not working on iphone 5
I have just brought iphone 5s. and it is not accepting my apple I.D I have singed into my laptop and it works fine. I have tried my friends ID, but still is not accepting. and including my e-mail as well. What should i do????
-
I had a balance of 16.34 on my iTunes account I added a credit card on the account and then removed it and now my balance is gone how do I get that back?
-
What steps do we need to follow for Performance tuning of Planning?