Mounting Brackets for WLC526

I ordered a WLC526 for a customer. Howevever, it didn't come with brackets to mount it into a standard 19" rack.
I called our distributer support. They said that it's intended to be a desktop unit. However, it has screw holes on the side of it.
Does anyone have a part number for brackets to mount the WLC526 into the rack?
Thanks,
Ben

Thanks alot.
Those part numbers are actually for the asa, but i hear they will work on the WLC526. The actual part number for the UC500 rack mounts is ACS-UC500RM-19=.
I found that the "UC500" part number quite a bit less expensive than the ASA part number.
Thanks,
Ben

Similar Messages

Rrack mounting brackets for Cisco switch SF300-48P ?

Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

You might be able to get them through Cisco support. Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

Wall mount bracket for AIR-ANT5160V-R

Hi all,
I am looking for a wall mount bracket reference, for these 2 models of antennas :
- AIR-ANT5160V-R
- AIR-ANT2506
Something like that :
I was not able to find any reference in cisco product list. Does anyone have an idea ?
Thank you

Hi Scott,
Thanks for your reply.
The picture I am showing is an example of what I have seen.
I am going to deploy lots of wireless sites, that's why I am looking for a reference of wall mount bracket I could buy to deploy easily the outdoor antennas.
It seems this accessory is not part of Cisco's product list ?
Regards

Are there any wall mount brackets for the new iMac 27" 5k?

I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008. I just purchased the new iMac 27inch 5k computer. It would be great to be able to use this computer with the wall mount. The ones that are available (VESA) from the apple store and say they will work with some older iMacs. My question is are there any available for the iMac I purchased? Thanks.

Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
iMac (Late 2012 and later): VESA mount compatibility - Apple Support

Wall mounting bracket for 20in IMAC G5

Anyone know what specific model will fit the 20in IMAC to mount on my wall??? and do I need to buy anything other than the bracket...

Hi Moliver2K9,
Here's a discussion thread that you might want to join:
http://discussions.apple.com/thread.jspa?threadID=262230&tstart=0
Cheers!
Karl

Car Mounting Bracket for N82

As title.
Any thoughts?
Thanks

CR-99.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Qosmio G10-100: Installing second HDD & obtaining mounting bracket

I'd like to install a second hard drive. Any instructions or general tips on how to do so would be greatly appreciated.
I'm looking at purchasing a HITACHI T7K500 Desktar 2.5" - 320 GB Interface: SATA 3.0 GB/s serial & ATA Ultra 133 parallel. Is this compatible??
I need help obtaining a mounting bracket for this upgrade or even information relating to the compatible brackets?
Thx in advance,

Thx again the site i was purchasing the drive from (pixmania) had incorrectly labled the Desckstar as 2.5". The travelstar is the one i need, i notice that there is a new 160GTB ATA (parralle) travelstar coming out:
Hitachi-HGST, Travelstar 5K160 HTS541616J9AT00 0A28419
Type ATA IDE-Ultra/100
Capacity 160gb
Would this be compatible???
Does anybody know where i can get a nounting bracket for this upgrade??

SF 300 Series rack mount brackets

I have misplaced the rack mount brackets for a SF 300-24P switch. I have searched online to try and find replacements. Anyone have a clue as to were I could find some?

Dave,
Please open a case with Cisco Support and they will be able to help you.
Thanks,
Ivor

Lost mounting bracket

I recently bought an MSI motherboard RS480M2-IL, but have lost the mounting bracket for the CPU fan. Is there anyway to buy just the bracket from somewhere, or do any CPU fans ship with their own bracket?
Thank you in advance for any replies.

No, but u don't need a mounting bracket, just the backplane, which is hellish to remove cus it's glued to the board. Which is a blessing 4 some ppl, cus u won't be able to use it.
I have this HSF:
http://www.newegg.com/Product/Product.asp?Item=N82E16835185114
It's dead cheap, really quiet, and really cool,on all fronts an improvement on the Zalman 7000-AlCU i head be4.
Vapochill looks nice to, heard that fan is quite noisy though, but can easilly be replaced.

Mounting Brackets (SG 200-26P & SF 300-24P)

Looking for mounting brackets for the SG 200-26P & SF 300-24P. Lost the originals and can't seem to find a new set anywhere online.

I don't think this could be ordered as a spare.
Look if you could find something similar in a local market, following are the measurements:

Universal Adapter Bracket for M55 8808

I have a Lenovo ThinkCentre M55 8808 desktop, and its hard drive died about two months ago. Fortunately, I had access to an old HP laptop that had some other parts gone bad, but still had a good hard drive. The problem is that the laptop drive is a 3.5" inch drive, while the drive that went bad was a 5.25" drive, so I need an adapter. The parts manual available online for my PC lists the "Universal Adapter Bracket 5.25 to 3.5-inch (all models)", FRU# 32P4743 for this purpose. However, this part seems very scarce. I only saw it for sale online at one or two places I never heard of for $30 or more, which is more than I would like to pay for it.
Does anyone know of a place where this part can be obtained affordably or of a different part that might work? I tried getting a CMS Products Universal Mounting Kit from Staples, but had to return it because it wouldn't fit.
Thank you.
- RJ
USA
Solved!
Go to Solution.

Thank you.
We bought something similar to the 2nd item you linked to.
Since that item's Description included the statement:
**NOTE** This bracket is only for side mounted hard drives. **NOTE**
we felt more comfortable ordering a BYTECC BRACKET-25350 2.5" Mounting Bracket Universal Adaptor For 3.5" Hard Drive.
The eBay listing showed a picture of a 2.5" drive mounted in the bracket,
and the manufacturer's listing for it included the statement:
Universal Mounting screw holes for variety computer cases, rack mounted PC.
That bracket works.

Dv7-3160us - Mounting kit for 2nd Hard Drive

Hello,
Sorry if the answer is posted elsewhere. I have looked and cannot find one specifically for my model.
I have a dv7-3160us, which has the secondary drive bay.
I have a second WD 500GB SATA bare drive.
Where can I find information on obtaining both a mounting bracket and the appropriate cable to mount this bare drive in the secondary drive bay?
I was on the phone with HP tech supp, and even after almost 30 minutes of trying to explain what I needed he still didn't have a clue and kept telling me it ALREADY had a 500GB hard drive in it...... :-) Enough of that.
Any help appreciated.
wp
This question was solved.
View Solution.

Never mind. Found it finally.
http://newmodeus.com/shop/index.php?main_page=product_info&products_id=222

Nokia CK-200 Mounting Bracket

I have recently taken delivery of a CK-200 carkit and unfortunately my son has managed to drop the mounting bracket and then stand on it.
Can anyone tell me where i can obtain a replacement please as i have been unable to locate one on the web.
Thanks
Rus

I have emailed Nokia customer support directly and I have been informed that i should contact Carphone Warehouse who will be able to assist me by obtaining the part. I have been to both of the suggested branches and have been told exactly the same thing 'Carphone warehouse do not stock the CK-200 and will not obtain parts for it'.
I am thoroughly disappointed with the service offered me by Nokia Customer support with regard to this matter.
Where does this leave me....other than with a Car Kit that frankly i may as well put in the bin and go and purchase a Parrot.
Any help would be greatly appreciated.

2nd HDD Bracket for SFF P300?

I recently purchased a Thinkstation P300 SFF machine that came configured with a 3.5" 1TB primary HDD.
I would now like to add a second 3.5" hard disk drive, but I need a bracket to install it into. That should be simple, right?
Unfortunately, after multiple calls to Lenovo sales and tech support...nobody can find a part number for this hard drive bracket. I've tried to order it twice - once they sent me a 2.5" HDD bracket that fits in my P300, but won't fit my 3.5" HDD. The second time, they sent me a 3.5" HDD bracket, but the bracket was for the tower version, not the SFF version of the P300.
According to the system specs and hardware manuals, the SFF P300 will accomodate TWO 3.5" HDD's.
It should not take this much trouble to add a second HDD to a "workstation" class machine.
Can anyone help? Is there a part number for this thing? Is anyone there?
Solved!
Go to Solution.

1. Yes, my P300 came with a DVD/RW. I think it is standard height. The bracket holding the ODD is 1/2" taller than the bracket holding the primary HDD.
2. Yes...the front panel includes a card reader, plus microphone input, headphone output, and 2 USB 3.0 slots.
It appears to me that there is room in the case for the 2nd HDD - it looks like the bracket for drive #2 has room to be installed against drive #1 (the bracket should allow them to connect together without screws, per the hardware manual).
I can post photos of the inside and outside of the unit, if that would help.
The unit I purchased was from CDW...here's the URL for it on their site.
Oh...and I will need a "bracket kit", including SATA data and power cables. There are only two SATA power cables on the motherboard, and those are both already taken up, so I will need some sort of power cable splitter in order to power both HDD's.
I suspect that this is an issue on your end...I've contacted both Sales and Support, multiple times, and neither one has been able to find me the bracket kit that I need.
I'm getting ready to return the P300 to CDW, because if I can't install a 2nd HDD, it's not useful to me. I would prefer to keep it, but not in its present state.
Thanks.

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

Mounting Brackets for WLC526

Similar Messages

Maybe you are looking for