Mounting external HD internally within os x. possible?

I just picked up a maxter 500gb external drive and i have no probs but.I have the external drive like 7 feet away and all the wires a routed in the desk.
Basically i have everything connected well firewire from mac to maxter.So when i eject mounted disc thats fine but say i want to mount it again is there a way i can do it within os x, cause the easiest way iv'e found (for my situation) was unplugging/plugging the firewire back in.
Any thoughts Thanks-J.

The correct partition scheme for a bootable drive, internal or external, is GUID.
CCC may not be hung on the winvista.hdd. It is your virtual machine and you say it is 23GB. CCC reports progress on number of files, not size, so it appears not to be doing anything while copying the winvista.hdd file. I would leave it longer than half an hour.
I use CCC to clone my MacBook Pro internal drive which has both Vista and XP virtual machines and CCC has no problem with them, but it does take a while. Also of course if you just start Vista and shut it down again, it will appear to CCC as a modified file and the whole 23 Gb will get copied again. Some people exclude VMs from the clone for this reason. Depends on your working habits.
Also don't do CCC with Vista suspended, shut it down.

Similar Messages

  • Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command   S, I get a looping "cannot mount errno = 19" message.

    Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
    Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
    When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
    When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
    When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
    When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
    When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
    When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
    I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

    It's a false report and should be ignored.
    I would not rely on TT as I've already said earlier even before Grant posted similar advice.
    I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
    Drive Partition and Format
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer.  Proceed with reinstalling OS X.
    5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Prob creating ABAP Proxy-Interface use external and interna msg definition

    Hi,
    I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
    Details of the error message:
    Message no. SPRX122
    Diagnosis
    In a message interface you can use messages from different sources:
    Message types and fault message types edited in the Enterprise Services Repository
    Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
    In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
    System Response
    The interface cannot be generated.
    Procedure
    Change the interface definition accordingly in the Enterprise Services Repository.
    p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
    Any help would be highly appreciated.
    - julius

    Hi Arvind,
    For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
    I couldnt find the above document in the service market place. Any hint to find it?
    Thanks.
    - julius

  • Clone a Mac Partition to an External Drive from within Windows 7 Bootcamp?

    Anyone know if it is possible to clone the mac os x partition to an external drive from within Windows 7 bootcamp? I (like a few others) had a problem with the latest 10.6.3 update and I cannot boot into the mac partition but I can access it via bootcamp so I was thinking about trying to clone it to an external drive and then boot from the new clone and see if that works.
    Appreciate your comments.

    setup a 30GB partition on an external drive, along with a partition of 150% the size of your Mac OS X volume -- or larger.
    Install OS X to 30GB.
    While booted from DVD, before you install, you'll need to go to Utility Menu => Disk Utility to do the partitoning. While there, in DU see if you can repair your system.
    And where is your TimeMachine or clone backup? The "Step #1: Backup before beginning your Boot Camp project."?
    No way to backup or clone from within Windows, though you may be able to write to NTFS backup volume, UNLESS you bought MacDrive8 which allows read AND write to HFS+ from within Windows.

  • External or internal storage

    oh man, a coupla things. Just got the 2.66 MacPro. Have perused many of these topics concerning boot drives (the WD 150 Raptor not set up as a RAID is what I'm leaning towards) and yet I still have questions! As mentioned I'm setting up with 3 gigs of Ram (2x1gb on top of the supplied 1 gb by apple) and the afore mentioned 150 Raptor SATA drive for the boot disk. Now my question concerns storage. I have many Adobe related files that are extensive. Should I use the Seagate HD apple supplied as storage and then get a nice size external drive to back-up? Should I get another large internal drive, like a Maxtor 300 gb and use that and then back up on the apple drive? I guess I'd like to optimize my system but I still feel somewhat daunted by all the options. Any advice would be greatly appreciated! Oh yeah. I've also read Migration Assistant is NOT the way to go. How do I get itunes and internet settings transferred from G4 to new Mac Pro? No more questions, I'll try to promise!
    Thanks, Jeff

    I am not using SR Performance to rate drives based on
    games or desktop use in Windows, but raw transfer,
    heat, and other basics, and they hold true when
    looked at with ZoneBench and QuickBench.
    Actually, this statement is false. The raw transfer rates do not apply to the Mac Pro SATA bus. In addition, QuickBench data on a Mac Pro is usually totally different than the PC data. The performance results of a PC on storagereview.com usually do not apply to a Mac Pro. If you are lucky, they might be close. The internal Mac Pro SATA bus impacts HD performance just about as much as the HD does. Finding a HD that works well with the internal SATA bus is the only way to optimize Mac Pro storage performance.
    I enjoy reading the storagereview articles too but when I buy based on that data many times I have problems.
    For instance, I saw the review data on the Hitachi T7K500 and I thought it might be a good hard drive for the Mac Pro based on the storagereview.com results. Wrong! Ned is totally correct these reviews don't apply at all to the Mac Pro.
    The Hitachi T7K500 works well on a host adapter but the firmware does not work correctly on the internal Mac Pro SATA bus. During my tests, the Hitachi T7K500 was never able to exceed a read speed of 50MB/sec. or a write speed of 60MB/sec. while mounted on the internal SATA bus of the Apple Mac Pro. Mount the T7K500 on a SATA host adapter and performance is over 70MB/sec. I contacted Hitachi and they had not tested it on a Mac. They are now looking at the issue in their labs.
    The Maxline Pro 500GB is another example. It will always provide lower DiskTester scores than the Maxline III 7V300F0 when it has less than 120GB on the hard drive. The storagereview article rates the 500GB faster. Only Mac Pro readers that have tested it or read the AMUG review learn the difference between these models.
    Bottom line is that anyone that buys a HD for a Mac Pro based on Storage Review articles takes a gamble. Users are much safer buying hard drives that have been tested on a Macintosh. Unless you actually test the hard drive on a Macintosh its hard to know what the real performance will be.
    The Apple Mac Pro internal SATA bus is frankly quite fussy about which hard drives work well with it. First it was Seagate 7200.10 compatibility issues now it's Hitachi. With few of the HD manufacturers doing any Mac performance testing its a crap shoot as to what Mac Pro third party HD performance will be.
    Buy Mac Pro drives based on Storage Review articles at your own risk.

  • OS refuses to mount external USB flash drive. Says a piece of OS software is missing.

    OS refuses to mount external USB flash drive. Says a piece of OS software is missing. The flash drive (thumb drive) usually lights up but does not go through the flashing on/off that was tyjpical when first inserting it.
    I tried an external hard drive and got the same results; that is, no result, as if it wasn't connected. No icon appears on the desktop and no device shows up in the sidebar. It (10.6.8, Mac Pro Duo) had worked perfectly before this, of course.

    Hmmmmm,,,,
    Disconnected all peripherals. Did a Safe Mode startup and that worked fine. Very limited features, of course.
    Started up with the Snow Leopart (10.6.3) disk. Used disk utility to verify permissions and ran disk repair on all three internal HDs. No repairs needed.
    Ran Drive Genius and did the same things, as a double-check.
    Plugged in the flash drive (thumb drive) and it came up fine (still operating the OS from the Sno-Leop disk). 
    I wanted to re-start with the disk and bring up the Apple Hardware Test as you suggested. I had lots of kernal panics on a previous machine, a G4 desktop, and has used that at that time (with a 10.2 or 10.4 disk). thought I remembered that you hold the D key down when starting up from the disk and it would open the hardware test, but either I remember wrong or it works different in 10.6 because it was just a normal startup.
    How do I get to the Hardware Test on the 10.6 Snow Leopard disk?
    Restarted without the disk and the Mac Pro desktop still showed the gray screen with what Apple calls the "prohibitory" sign, the circle with the diagonal line in it.
    I decided to load the OS disk onto HD 3 and designate that as the startup disk, which I did and it works fine. The USB flash drive loads properly, opens, etc. just as it should. I haven't yet plugged in the peripherals (scanner, printer, second DVD/CD recorder, tablet, an external drive, or connected to ethernet yet. Will do those one at a time and see if any of them casued a problem.)
    Am I right in thinking:
    A) HD One might have bad sections. I didn't defrag with Drive Genius (26% fragged) or look for bad blocks, which I'll probably do tonight.
    or B) the OS has been slightly corrupted and may need reloading
    or C) I have a virus or conflict (though I haven't added anything new lately). I do have the ButtonManager loading problem for Mac. which is talked about on MacRumors site, etc. but the timing of its appearance and this problem don't match.
    Apologies for being so wordy; want to get all information that may be helpful. I appreciate your interest.

  • Can you Launch External Applications From Within InDesign Ebook?

    Hi all,
    I was wondering if it is possible to open an external application from within an ebook (created with InDesign) e.g. click on a link and have an external ssh client open up for instance?
    Thanks in advance for any advice.
    Regards,
    RG

    It's possible to include hyperlinks in an InDesign file and export them in an EPUB file. Since I'm not familiar with working with SSH clients (in fact, I just had to Google it to have a clue what you're talking about), is this something that can be invoked in a standard URL format? If so, you could probably include it.
    The next issue is whether the link would work. The link couldn't be used directly in any eBook reader I know of, but at least the iBook on an iPad or iPhone would switch to to Safari to let you follow a URL to its destination. But I don't think that's possible on most eBooks.

  • Yosemite cannot mount external disks

    Since I upgraded to Yosemite my IMAC does not mount external disks, even the bright new one I bought
    I have also a Macbook Air that I upgraded to Yosemite and these same external disks can be mounted on the Macbook Air.
    I have searched on the Apple support community and on the internet and quite some people whom upgraded to Yosemite have the same problem.
    I checked the USB specs on both the IMAC and the MACbook Air
    IMAC :
         Hostcontroller : builtin userinterface
         OS hostcontroller : AppleUSBEHCI
         PCI- code : 0x3b34
         PCI revision code : 0x0006
         PCI factory code : 0x8086
         Busnb : 0Xfd
    MACBook Air:
         Hostcontroller : builtin userinterface
         OS hostcontroller : AppleUSBEHCI
         PCI- code : 0x0d9d
         PCI revision code: 0x00a2
         PCI factory code : 0x10de
         Bus Nb : 0x24
    Needless to say that I need the data stored on the external disks.
    Thks for helping me out.

    I have read that if you turn Spotlight off you will have no problems. Open Spotlight, choose "privacy", click the "+" at the lower left and add what you do not Spotlight to search. Worked for me. I have 2 internal Seagates formatted OS X journaled in an external case.

  • External product configurator within a CRM-ERP LORD2 scenario?

    Is it possible to use an external product configurator within a CRM-ERP LORD2 scenario?
    My customer has a running webshop with an own configuration UI (java based) which is connected through badis with the ECC.
    And now we implemented in SAP CRM the ERP Quotation.
    Instead of rebuilding the varionatfunctions ord attributes seting the customer thinks about to intgrate the existing "konfigurator" of his web shop.
    Is there anyone who knows the interface
    Basic Functions -> Product Configuration -> Settings for External Configurators.
    more detailed.
    Where can I find an Interface declaration?
    Is the planned approached in general a valid way (from your point of view).
    thanks,
    Dirk

    Hi Stuart,
    You have to notice that in order to user R/3 BOM in CRM,
    you have to download object BOM (tcode R3AC1).
    But downloading object BOM into CRM only possible if
    your R/3 is Retail scenario (unfortunetly mine is not).
    Next thing I am going to test is, create Knowledge Base
    in R/3 (choosing the type = BOM). after that in CRM
    download using standard configurable object SCE.
    If this successfull, we can see the configurable in
    the Material Master CRM.
    I am going to try this in couple days, please try it
    first and let me know the result.
    Hope this give you some information.
    Cheers,
    Gun.

  • Mounting external tables - ORA-03113 caused when trying to select from

    We're having trouble trying to select from a mounted external table on Oracle 9.2.0.1.0. Each time a procedure containing the simple select statment is executed (within sqlplus) it causes the following error:
    ORA-03113: end-of-file on communication channel
    Initially we thought it was because we were using sqlplus 8.1.7 but when switching to 9.2.0 the error still occurs. We can do a desc and select count(*) on it though.
    Is this a know bug? Is there a work around?
    Jo

    We're having trouble trying to select from a mounted external table on Oracle 9.2.0.1.0. Each time a procedure containing the simple select statment is executed (within sqlplus) it causes the following error:
    ORA-03113: end-of-file on communication channel
    Initially we thought it was because we were using sqlplus 8.1.7 but when switching to 9.2.0 the error still occurs. We can do a desc and select count(*) on it though.
    Is this a know bug? Is there a work around?
    Jo

  • Mounting external tables - ORA-03113 caused when trying to select

    We're having trouble trying to select from a mounted external table on Oracle 9.2.0.1.0. Each time a procedure containing a simple select statement is executed (within sqlplus) it causes the following error:
    ORA-03113: end-of-file on communication channel
    Initially we thought it was because we were using sqlplus 8.1.7 but when switching to 9.2.0 the error still occurs. We can do a desc and select count(*) on it though.
    Is this a know bug? Is there a work around?
    Jo

    We're having trouble trying to select from a mounted external table on Oracle 9.2.0.1.0. Each time a procedure containing a simple select statement is executed (within sqlplus) it causes the following error:
    ORA-03113: end-of-file on communication channel
    Initially we thought it was because we were using sqlplus 8.1.7 but when switching to 9.2.0 the error still occurs. We can do a desc and select count(*) on it though.
    Is this a know bug? Is there a work around?
    Jo

  • External and internal mikes are not automatically switching over either recording or on voice calls

    My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
    Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
    1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
       Using the sound recorder if I start recording the sound with external  mike  and in-between  recording if I  switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound  up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
       But if I start the recording with inbuilt mike and in between recording  if I plug in  the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
       So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
    2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
    To resolve the issue I have tried following steps with no luck:
    1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
    2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
    3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
    3. I have updated the BIOS(Insyde F.65, 12/02/2010).
    4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

    Sounds like you need to upgrade to the iPhone 5s
    The 5s has Touch ID
    You can unlock your phone with your finger instead of typing in a key code
    No swiping to unlock either, just touch the home button
    You can enrol multiple fingers as well
    Here is a video of it in action
    http://www.apple.com/iphone-5s/videos/#video-touch
    Or wait and see what iPhone 6 has to offer
    That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
    And when you lower the phone turn it back on again
    Not sure about the phone locking when your on a call doesn't sound right

  • What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

    What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

    Its worth confirming what free space you have on your drive: 
    go to:   Apple Menu > About this Mac >  More Info > Storage
    The bar chart shows how much free space there is on the drive:
    Please realise that partitioning does not create extra space so this wont help you.
    If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

  • How to call Operating System commands / external programs from within APEX

    Hi,
    Can someone please suggest how to call Operating Systems commands / external programs from within APEX?
    E.g. say I need to run a SQL script on a particular database. SQL script, database name, userid & password everything is available in a table in Oracle. I want to build a utility in APEX where by when I click a button APEX should run the following
    c:\oracle\bin\sqlplusw.exe userud/password@database @script_name.sql
    Any pointers will be greatly appreciated.
    Thanks & Regards,

    Hi Guys,
    I have reviewed the option of using scheduler and javascript and they do satisfy my requirements PARTIALLY. Any calls to operating system commands through these features will be made on the server where APEX is installed.
    However, here what I am looking at is to call operating systems programs on client machine. For example in my APEX application I have constructed the following strings of commands that needs to be run to execute a change request.
    sqlplusw.exe user/password@database @script1.sql
    sqlplusw.exe user/password@database @script2.sql
    sqlplusw.exe user/password@database @script3.sql
    sqlplusw.exe user/password@database @script4.sql
    What I want is to have a button/link on the APEX screen along with these lines so that when I click that link/button this entire line of command gets executed in the same way it would get executed if I copy and paste this command in the command window of windows.
    Believe me, if I am able to achieve what I intend to do, it is going to save a lot of our DBAs time and effort.
    Any help will be greatly appreciated.
    Thanks & Regards,

  • External FXML file within AnchorPane/BorderPane/Pane

    I need to load a FXML file into a panel (AnchorPane, BorderPane, Pane, etc) but I had some problems.
    Initially I tried to load my external FXML file within AnchorPane the following manner:
    package signa;
    import java.net.URL;
    import java.util.ResourceBundle;
    import javafx.event.ActionEvent;
    import javafx.fxml.FXML;
    import javafx.fxml.Initializable;
    import javafx.scene.Parent;
    import javafx.scene.control.Button;
    import javafx.scene.control.Label;
    import javafx.scene.layout.AnchorPane;
    import javafx.scene.layout.BorderPane;
    import javafx.scene.layout.HBox;
    public class Estructura_GeneralController {
        /*ignore this section
        @FXML Button modalidadButton;
        @FXML Button closeButton;
        @FXML Button chatButton;
        @FXML Button helpButton;
        @FXML HBox herramientas;
        @FXML Button latLonBtn;
        @FXML Button utmBtn;
        @FXML AnchorPane paneles;
        @FXML Button agregarUnidadBtn;
        @FXML Button derrotasBtn;
        @FXML Button editarUnidadBtn;
        @FXML Button marcadoresBtn;
        @FXML Button organizacionTareasBtn;
        @FXML Button nuevoPlanBtn;
        @FXML Button patronesBtn;
        @FXML Parent agregarUnidadPanel;
        @FXML Parent derrotasPanel;
        @FXML Parent editarUnidadPanel;
        @FXML Parent marcadoresPanel;
        @FXML Parent organizacionTareasPanel;
        @FXML Parent nuevoPlanPanel;
        @FXML Parent patronesPanel;
        public void switchPane(ActionEvent event) {
              Object eventSource = event.getSource();
              if (eventSource == agregarUnidadBtn) {
    //               paneles.setCenter(agregarUnidadPanel);//.addAll(pane1);
                            paneles.setLeftAnchor(agregarUnidadPanel, null);
                            paneles.getChildren().addAll(agregarUnidadPanel);
              } else if (eventSource == derrotasBtn) {
                   paneles.setLeftAnchor(derrotasPanel, null);
                            paneles.getChildren().addAll(derrotasPanel);
              } else if (eventSource == editarUnidadBtn) {
                   paneles.setLeftAnchor(editarUnidadPanel, null);
                            paneles.getChildren().addAll(editarUnidadPanel);
              } else if (eventSource == marcadoresBtn) {
                   paneles.setLeftAnchor(marcadoresPanel, null);
                            paneles.getChildren().addAll(marcadoresPanel);
              }else if (eventSource == organizacionTareasBtn) {
                   paneles.setLeftAnchor(organizacionTareasPanel, null);
                            paneles.getChildren().addAll(organizacionTareasPanel);
              }else if (eventSource == nuevoPlanBtn) {
                   paneles.setLeftAnchor(nuevoPlanPanel, null);
                            paneles.getChildren().addAll(nuevoPlanPanel);
              }else if (eventSource == patronesBtn) {
                   paneles.setLeftAnchor(patronesPanel, null);
                            paneles.getChildren().addAll(patronesPanel);
    }Now, in the FXML file:
    //All this is within a AnchorPane
                      <AnchorPane fx:id="paneles" minHeight="0.0" minWidth="0.0" styleClass="anchorpane">
                      <prefHeight>
                        <Long fx:value="851" />
                      </prefHeight>
                      <prefWidth>
                        <Long fx:value="426" />
                      </prefWidth>
                      <stylesheets>
                        <URL value="@SIGNA.css" />
                      </stylesheets>
                      <fx:define>
                             <fx:include source="Panel_AgregarUnidades.fxml" fx:id="agregarUnidadPanel"/>
                      </fx:define>
                      <fx:define>
                             <fx:include source="Panel_Derrotas.fxml" fx:id="derrotasPanel"/>
                      </fx:define>
                      <fx:define>
                             <fx:include source="Panel_EditarUnidades.fxml" fx:id="editarUnidadPanel"/>
                      </fx:define>
                      <fx:define>
                             <fx:include source="Panel_Marcadores.fxml" fx:id="marcadoresPanel"/>
                      </fx:define>
                      <fx:define>
                            <fx:include source="Panel_OrganizacionTareas.fxml" fx:id="organizacionTareasPanel"/>
                      </fx:define>
                      <fx:define>
                            <fx:include source="Panel_NuevoPlan.fxml" fx:id="nuevoPlanPanel"/>
                      </fx:define>
                      <fx:define>
                            <fx:include source="Panel_PatronesPanel.fxml" fx:id="patronesPanel"/>
                      </fx:define>
                    </AnchorPane>
                    //With these buttons try to load the external panels
                    <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="160.0" prefWidth="100.0" styleClass="anchorpane, Vbox">
                      <children>
                        <Button fx:id="agregarUnidadBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="12.0" mnemonicParsing="false" onAction="#switchPane" prefWidth="88.0" text="${'Agregar' + '\n' + 'Unidades'}" />
                        <Button id="derrotasPanel" fx:id="derrotasBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="57.0" mnemonicParsing="false" onAction="#switchPane" prefHeight="37.0" prefWidth="88.0" text="Derrotas" />
                        <Button fx:id="editarUnidadBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="102.0" mnemonicParsing="false" onAction="#switchPane" prefWidth="88.0" text="${'Editar' + '\n' + 'Unidades'}" />
                        <Button fx:id="marcadoresBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="147.0" mnemonicParsing="false" onAction="#switchPane" prefHeight="37.0" prefWidth="88.0" text="Marcadores" />
                        <Button fx:id="organizacionTareasBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="192.0" mnemonicParsing="false" onAction="#switchPane" prefWidth="88.0" text="${'Organización' + '\n' + 'de Tareas'}" />
                        <Button fx:id="nuevoPlanBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="237.0" mnemonicParsing="false" onAction="#switchPane" prefWidth="88.0" text="${'Nuevo' + '\n' + 'Plan'}" />
                        <Button fx:id="patronesBtn" contentDisplay="CENTER" layoutX="5.0" layoutY="282.0" mnemonicParsing="false" onAction="#switchPane" prefHeight="37.0" prefWidth="88.0" text="Patrones" />
                      </children>In this way I managed to load the external FXML file but but gives me an exception.
    WARNING: com.sun.javafx.css.StyleHelper calculateValue caught:
    java.lang.IllegalArgumentException: No enum constant javafx.geometry.Pos.left
    furthermore if I press a button pressed previously, I have another problem of exception.
    java.lang.RuntimeException: java.lang.reflect.InvocationTargetException*
    Caused by: java.lang.reflect.InvocationTargetException
    *Caused by: java.lang.IllegalArgumentException: Children: duplicate children added: parent = AnchorPane[id=paneles, styleClass=anchorpane]*
    I also tried a slightly changing BordePane controller code:
    public void switchPane(ActionEvent event) {
              Object eventSource = event.getSource();
              if (eventSource == agregarUnidadBtn) {
                   paneles.setCenter(agregarUnidadPanel);
                            paneles.getChildren().addAll(agregarUnidadPanel);
              } Now obviously the variable "paneles" is a BorderPane.
    however the result is the same only without having the problem of the second exception I had with the AnchorPane
    I attached a picture to have some idea
    Thank you very much any help and I ask an apology for the bad English.
    http://img42.imageshack.us/img42/5770/panelssigna.png
    http://img17.imageshack.us/img17/117/examplepanelagregarunid.png
    Edited by: biochemistry43 on 11/12/2012 12:55 PM

    This is the only part in my CSS file where the word left
    .table-view .column-header .label{
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
        -fx-text-fill: white;
        -fx-alignment: left;
    }This is the only part in my CSS file where the word left
    If I suppress the error goes away which is great and I am happy but ... I do not understand why ... Why does that matter?
    If I put the word left (without quotes) returns the error and if I put it back (with quotes), however get the error.
    This is all my CSS code:
    .theme {
            master-color: gray;
        -fx-border-width: 1px;
    /*    -fx-border-color: rgb(30,30,30);*/
        -fx-background-color: rgb(50,50,50);
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
    *.split-pane {
        -fx-padding: 0;
        -fx-border-width: 0;
    *.anchorpane {
        -fx-background-color: rgb(50,50,50);
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.4) , 5, 0.0 , 0 , 1 );
        /*-fx-background-insets: 0,1,4,5,6;*/
        -fx-background-radius: 9,8,5,4,3;   
        -fx-padding: 3 11 3 11;
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
        -fx-border: 1px;
        -fx-border-color: rgb(30,30,30);
    .borderpane {
        -fx-background-color: rgb(50,50,50);
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.4) , 5, 0.0 , 0 , 1 );
        /*-fx-background-insets: 0,1,4,5,6;*/
        -fx-background-radius: 9,8,5,4,3;   
        -fx-padding: 3 11 3 11;
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
        -fx-border: 1px;
        -fx-border-color: rgb(30,30,30);
    /*Layouts menores*/
    *.Hbox {
    -fx-background-color: rgb(80,80,80);
    -fx-background-radius: 10px;
    -fx-border-width: 2px;
    -fx-border-color: rgb(110,110,110);
    -fx-border-radius: 10px;
    -fx-padding: 5px;
    -fx-spacing: 5px;
    *.Vbox {
    -fx-background-color: rgb(80,80,80);
    -fx-background-radius: 10px;
    -fx-border-width: 2px;
    -fx-border-color: rgb(110,110,110);
    -fx-border-radius: 10px;
    -fx-padding: 5px;
    .frame {
        -fx-background-color: rgb(80, 80, 80);
        -fx-padding: 2px;
        -fx-border-width: 2px;
        -fx-border-color: rgb(110, 110, 110) ;
    .display-frame {
        -fx-border-color: rgb(230, 230, 230);
        -fx-border-radius: 10px;
        -fx-border-width: 2px;
        -fx-padding: 2px;
        -fx-background-color: linear-gradient(#505050 5%, #505050 60%, #404040 80%);
    /*botones*/
    .toggle-button{
        min-width: 25px;
         max-width: 80px;
         min-height: 18px;
         max-height: 19px;
        -fx-border-radius:10px;
        -fx-padding: 5; /*espacio entre los bordes del boton*/
        -fx-background-radius: 10px;
        -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
        -fx-text-fill: white ;
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
    .toggle-button:hover {
        -fx-effect: dropshadow( three-pass-box , #808080  , 5, 0.6 , 0 , 0);
    .toggle-button:selected {
        -fx-background-color: rgb(130,130,130);
        -fx-text-fill: white;
        -fx-border-insets: 0;
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    /*.menu-item {
        -fx-background-color: gray;
    .button {
         min-width: 25px;
         max-width: 80px;
         min-height: 18px;
         max-height: 19px;
        -fx-border-radius:10px;
        -fx-padding: 5; /*espacio entre los bordes del boton*/
        -fx-background-radius: 10px;
        -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
        -fx-text-fill: white ;
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
    .button:hover {
       -fx-effect: dropshadow( three-pass-box , #808080  , 5, 0.6 , 0 , 0);
    .button:pressed {
    /*    -fx-border-color:rgb(0, 225, 255);*/
    /*    -fx-border-width: 2px;*/
        -fx-background-color: rgb(130,130,130);
        -fx-text-fill: white;
        -fx-border-insets: 0;
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    #nvoPlanBtn:focused, #openPlanBtn:focused, #savePlanBtn:focused, #closePlanBtn:focused,
    #addUnitsBtn:focused, #editUnitsBtn:focused, #tareasBtn:focused, #marcadoresBtn:focused, #derrotasBtn:focused,
    #patronesBtn:focused, #metOCBtn:focused {
        -fx-background-color: rgb(130,130,130);
        -fx-text-fill: white;
        -fx-border-insets: 0;
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    .etiquetas-botones {
        -fx-text-fill: white;
        -fx-font-style: italic;
    #newButton:pressed, #openButton:pressed, #saveButton:pressed, #saveAsButton:pressed, #layersButton:pressed,
    #zoomInButton:pressed, #zoomOutButton:pressed, #zoomMexicoButton:pressed, #zoomMundoButton:pressed, #zoomBoxButton:pressed,
    #panViewButton:pressed, #selectButton:pressed, #pointButton:pressed, #poliLineButton:pressed{
        -fx-background-color: rgb(130,130,130);
        -fx-text-fill: white;
        -fx-border-insets: 0;
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    .split-pane .split-pane-divider {
        -fx-background-color: rgb(50,50,50);
        -fx-border-color: rgb(50,50,50);
        -fx-minor-tick-visible: false;
    #newButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/file_new.png");
    /*    -fx-background-color: transparent;*/
    #openButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/abrir.png");
    /*    -fx-background-color: transparent;*/
    #saveButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/guardar.png");
    /*    -fx-background-color: transparent;*/
    #saveAsButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/guardar_como.png");
    /*    -fx-background-color: transparent;*/
    #layersButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/Layers.png");
    /*    -fx-background-color: transparent;*/
    #zoomInButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/Zoom_In.png");
    /*    -fx-background-color: transparent;*/
    #zoomOutButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/Zoom_Out.png");
    /*    -fx-background-color: transparent;*/
    #zoomMexicoButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/mexico.png");
    /*    -fx-background-color: transparent;*/
    #zoomMundoButton{
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/mundo.png");
    /*    -fx-background-color: transparent;*/
    #zoomBoxButton{
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/zoom-box.png");
    /*    -fx-background-color: transparent;*/
    #panViewButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/pan.png");
    /*    -fx-background-color: transparent;*/
    #selectButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/pointer.png");
    /*    -fx-background-color: transparent;*/
    #pointButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/punto.png");
    /*    -fx-background-color: transparent;*/
    #poliLineButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/polilinea.png");
    /*    -fx-background-color: transparent;*/
    #shapeButton {
    /*    -fx-text-fill: null;*/
        -fx-graphic: url("../signa/img/poligono.png");
    /*    -fx-background-color: transparent;*/
    #closeButton {
        -fx-text-fill: null;
        -fx-graphic: url("../signa/img/close.png");
        -fx-background-color: transparent;
    #closeButton:hover{
        -fx-effect: dropshadow( three-pass-box , red  , 5, 0.6 , 0 , 0);
    #closeButton:pressed{
        -fx-effect: dropshadow( three-pass-box , aqua  , 5, 0.6 , 0 , 0);
    #helpButton {
        -fx-text-fill: null;
        -fx-graphic: url("../signa/img/Help_Icon.png");
        -fx-background-color: transparent;
    #chatButton {
        -fx-text-fill: null;
        -fx-graphic: url("../signa/img/chat.png");
        -fx-background-color: transparent;
    /*.menu-button {
         min-width: 25px;
         max-width: 80px;
         min-height: 18px;
         max-height: 19px;
        -fx-text-fill:white;
        -fx-border-radius:10px;
        -fx-padding: 5; espacio entre los bordes del boton
        -fx-background-radius: 10px;
        -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
        -fx-text-fill: aliceblue;
    .menu-item:hover {
         -fx-blend-mode: darken;
    .label{
        -fx-font-weight: bold;
    .label.headPaneLabel{
        -fx-font-size:20px;
        -fx-font-family: "Calibri";
        -fx-text-fill: rgb(234,254,254);
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
    .label.contentLabel {
        -fx-font-size:11px;
        -fx-font-family:"Calibri";
        -fx-font-style: normal ;
        -fx-text-fill: rgb(234,254,254);
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);  
    .label-name {
        -fx-text-fill: rgb(0, 225, 255);
        -fx-font-size: 36px;
        -fx-font-weight: bold;
    .label-unit-station {
        -fx-text-fill: rgb(0, 225, 255);
        -fx-font-size: 17px;
        -fx-font-weight: bold;
    .label-date-timeUTC-gps {
        -fx-text-fill: rgb(0, 225, 255);
        -fx-font-size: 14px;
        -fx-font-weight: bold;
    .label-cog-sog-hdg {
        -fx-text-fill: rgb(0, 225, 255);
        -fx-font-size: 16px;
        -fx-font-weight: bold;
    .label-long-lat {
        -fx-text-fill: rgb(0, 225, 255);
        -fx-font-size: 22px;
        -fx-font-weight: bold;
    /*radiobuttons*/
    .radio-button {
        -fx-text-fill: rgb(234,254,254);
        -fx-border: transparent;
    .radio-button:pressed .dot {
        -fx-background-color: black;
    .radio-button:hover .radio {
        -fx-effect: dropshadow( three-pass-box , #00FFFF , 3, 0.0 , 0 , 1);      
    .radio-button:focused .radio{
      -fx-effect: dropshadow( three-pass-box , #00FFFF , 3, 0.0 , 0 , 1);
    .separator {
        -fx-background-color: rgb(234,254,254);
        -fx-border-style: none;
        -fx-border-width: 0px;
    .text-field {
        -fx-border-width: 1px;
        -fx-border-color: rgb(130,130,130);
        -fx-border-radius: 5px;
        -fx-background-radius: 5px;
        -fx-background-color: rgb(50,50,50);
        -fx-text-fill: white;
    .choice-box {
        -fx-border-width: 1px;
        -fx-border-color: rgb(130, 130, 130);
        -fx-border-radius: 5px;
        -fx-text-fill: white;
        -fx-background-radius: 5px;
        -fx-background-color: rgb(50,50,50);
    .table-view {
        -fx-background-color: rgb(70,70,70);
        -fx-text-fill: white;
        -fx-border-style: solid;
        -fx-border-color: transparent;
    /*    -fx-border-insets: 0 1 1 0, 0 0 0 0;*/
        -fx-border-width: 0.083333em, 0.083333em;
    .table-view .column-header{
        -fx-border-style: solid;
        -fx-border-color: rgb(130, 130, 130);
        -fx-border-radius: 5px;
        -fx-background-radius: 5px;
        -fx-border-insets: 0 1 1 0, 0 0 0 0;
        -fx-border-width: 0.083333em, 0.083333em;
    .table-view .column-header .label{
        -fx-font-size: 11px;
        -fx-font-family: "Calibri";
        -fx-text-fill: white;
    /*    -fx-alignment: "left";*/
    .table-view .column-header-background {
        -fx-background-radius: 5px;
        -fx-font-family: "Calibri";
        -fx-background-color:  rgb(50,50,50);
    .table-view .column-header-background .filler{
        -fx-background-color: rgb(50,50,50);
        -fx-border-color: rgb(50,50,50);
    .table-row-cell {
        -fx-background-color: rgb(100,100,100);
        -fx-background-insets: 0, 0 0 1 0;
        -fx-padding: 0.0em;
    .table-row-cell:selected {
        -fx-background-color: dimgrey;
        -fx-background-insets: 0, 0 0 1 0;
        -fx-padding: 0.0em;
    /*.table-cell {
        -fx-font-style: bold;
        -fx-text-fill: black;
    .table view .table-cell:selected{
        -fx-text-fill: white;
    /*.table-row-cell:odd {
        -fx-background-color: #414141;
        -fx-background-insets: 0, 0 0 1 0;
        -fx-padding: 0.0em;  0
        -fx-text-fill: white;
    .scroll-bar .track{
        -fx-background-color: rgb(130,130,130);
        -fx-border-width: 1px;
        -fx-border-color: gray;
    .scroll-bar .track:pressed{
        -fx-background-color: white;
    .scroll-bar .thumb{
        -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
    .scroll-bar .thumb:hover{
        -fx-effect: dropshadow( three-pass-box , #808080  , 5, 0.6 , 0 , 0);
    .scroll-bar .thumb:pressed{
       -fx-background-color: rgb(130,130,130);
       -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    .scroll-bar .decrement-button{
       -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
    .scroll-bar .decrement-button:hover {
          -fx-effect: dropshadow( three-pass-box , #808080  , 5, 0.6 , 0 , 0);
    .scroll-bar .decrement-button:pressed{
        -fx-background-color: rgb(130,130,130);
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    .scroll-bar .decrement-button .decrement-arrow{
        -fx-background-color: gray;
        -fx-border-color: transparent;
        -fx-border-width: 0px;
    .scroll-bar .decrement-button .decrement-arrow:pressed{
        -fx-background-color: white;   
    .scroll-bar .increment-button{
        -fx-background-color:
            #090a0c,
            linear-gradient(#404040 0%, #404040 5%, #303030 60%)
            radial-gradient(center 50% 0%, radius 100%, rgba(114,131,148,0.9), rgba(255,255,255,0));
        -fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 3, 0.0 , 0 , 1);
    .scroll-bar .increment-button:hover{
         -fx-effect: dropshadow( three-pass-box , #808080  , 5, 0.6 , 0 , 0);
    .scroll-bar .increment-button:pressed{
        -fx-background-color: rgb(130,130,130);
        -fx-effect: dropshadow( three-pass-box , rgba(0, 225, 255,1) , 5, 0.3 , 0 , 0);
    .scroll-bar .increment-button .increment-arrow{
        -fx-background-color: gray;
        -fx-border-color: transparent;
        -fx-border-width: 0px;
    .scroll-bar .increment-button .increment-arrow:pressed{
        -fx-background-color: white;
    .scroll-pane .corner{
        -fx-background-color: transparent;
    .tab-pane{
        -fx-tab-max-height: 12pt;
    .tab-pane .tab-content-area{
       -fx-background-color: rgb(80, 80, 80);
       -fx-padding: 2px;
       -fx-border-width: 2px;
       -fx-border-color: rgb(110, 110, 110) ;
    .tab-pane .tab-header-area .tab{
        -fx-background-color: rgb(60, 60, 60);
        -fx-background-radius: 4px;
        -fx-border-width: 2px;
        -fx-border-color: #707070;
        -fx-border-radius: 4px;
        -fx-padding: 0 0 0 0;
    .tab-pane .tab-header-area .tab:hover{
        -fx-border-color:  linear-gradient(#909090 60%, #909090 5%, #909090 0%);
    .tab-pane .tab-header-area .tab:selected{
        -fx-border-color:  linear-gradient(#00FFFF 60%, #00FFFF 5%, #00FFFF 0%);
        -fx-background-color: rgb(130,130,130);
        -fx-text-fill: white;
        -fx-border-insets: 0;
    .tab-pane .tab-header-area .tab-header-background {
        -fx-background-color:transparent;
    .tab-pane .tab-header-area .tab .tab-label{
        -fx-text-fill: white;
         -fx-font-size: 11px;
        -fx-font-family: "Calibri";
        -fx-alignment: center;
    }Edited by: biochemistry43 on 13/12/2012 09:06 AM

Maybe you are looking for

  • Media Manager does not work

    I have an 8700C.  I installed Blackberry Desktop Manager V4.6.0.12 and I have V4.2.1.96 (Platform 2.3.0.79) OS installed on my device.  When I go into the Media icon in Desktop Manager I have a split screen with Media Manager on the left and Blackber

  • Initial upload of Stock in WM without creation Transfer order

    Hi All, I want perform intial stock upload (movement type 561) in a Plant and Storage Location. The Storage location is WM activated. So I need to post 561 movement in IM i need then manual move the stock from Interium Bin to normal bin through Tcode

  • Is it possible to add a link to another form on a form?

    I'm using Adobe Standard 6.0.3 and am rendering the forms using FormServer. I just need to be able to click on a button and go to a URL in a separate browser. I've tried this with xfa.host.gotoURL, but couldn't get it to open in the separate browser.

  • Aperture photos not showing up in iPad sync window in iTunes

    Many of my projects and albums show up as empty or only partially there when I select them to sync to my iPad in iTunes. All of the projects and albums are there but most of them appear as empty when I check them. I have tried several things includin

  • JPEG, TIFF or PSD?

    When Preparing images in PS for use in a PrPro DVD, what file format is best to "save as" in PS? Thank you Michael