Mounting folders within a network share ... please help!

Hi,
I am trying to mount a folder that is one level deep in the share using the following item within an applescript:
Mount Volume “SMB://server/share/folder”
The share is located on a windows server and I am trying to mount to the users folder within that share. Does anyone know if there is a way to do this? when i use the above command the volume gets mapped at the share instead of the folder. i have tried this with the latest 10.3 and 10.4 versions with no luck.
thanks
Scott
G4 Mac OS X (10.3.9)

Scott
I can only supply some info:
Windows side:
http://www.windowsnetworking.com/j_helmig/win2k.htm
including windows 2000 server
Mac side:
http://homepage.mac.com/william_white/smbdoc.html
http://www.joelshoemaker.com/computer/mac/wxpfs.html
second with forum to ask,perhaps

Similar Messages

I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs mem

I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset

I can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi

i can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi.

i switched off all the security settings and all the firewalls.
i m unable to install any of the app on the ipad
so i saw the apple support and it said to update the older version of my ipad.
and niether am i able to download the update nor am i able to download any app and install it in my ipad2
i also tried to download an .ipsw file (ios5 update) from torrentz bt i am also unable to install from that as itunes rjects that file and gives an error. and also tries to delete that file. plz anyone help urgently.

Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
[email protected]

Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime). If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

Why is it that I can't receive the email to reset my security questions and answers.. My email information is all accurate but I'm not receiving the email and I've even checked spam and junk folders.. Can someone please help me please???

Why is it that I can't receive the email to reset my security questions and answers.. My email information is all accurate but I'm not receiving the email and I've even checked spam and junk folders.. Can someone please help me

Are you able to receive any mail at all? If not, make sure that all of your information for mail is accurate in settings again. if you still have nothing, go to your email through safari. (example: www.yahoo.com) If you do not see the emails here either, it is a problem with the password reset server not your mail app.

I just transfer the new software to my iphone 4 and now it has no network. Please help me

I just transfer the new software to my iphone 4 and now it has no network. Please help me

I don't know what really happened and why and how it 'came back to normal again' but thank you so much you guys. I'm new at this, as you may seen, and i'm portuguese, and my english is terrible. you reallyyyyy helped me, i has just almost having an heart attack. This was my b-day gift and here in portugal apple stuff are very expensive (at least for me)

I need to know how to download all photos AND videos from 2 "libraries" within Adobe Revel. Please help.

I was quite angered last night when I posted the first time, so lets try this again:
Here is my setup: I have adobe Revel on my Mac and iOS devices and it has worked quite well to be honest until I recently realized my photos and videos are basically trapped within the software. There is no way (that I am aware) to export all photos/videos or any kind of tool to pull the raw data out of the app and put it into say iPhoto or Lightroom.
Since I am not a fan of this sort of lock-in, (something I despise and encourage companies never to do), I am sadly going to cancel my Revel account once I get this sorted and store my photos elsewhere. This is a huge missed opportunity for Adobe, as the money is not an issue - its simply that the quality of service I need just doesn't seem to be there for this product.
So here is what I am trying to achieve: I simply want every one of my photos and videos to store on my hard drive like the old days. I don't care about folders or hirarcy or any kind of organization - I can do that with the metadata later. I simply want all of my things.
My hang up is in that I have already tried methods like "Show package contents" in the photos/adobe revel route and that works to an extent, but is incredibly cumbersome as I have to sift through all of the many folders. If that were the worst of it, I might be ok. But what is truly alarming and making this difficult is that I don't know where on earth the videos in Revel are actually stored. They show up in the application and I could export them one by one but I literally have hundreds. I can't find the actual files on my Mac anywhere.
Is there anyone at all who can help with this? The goal is to make this transition fairly easy and I feel that Adobe has very intentionally made it very difficult to consider leaving. I spend >$50/month on Adobe services and I am a little in shock this application seems so poorly designed for anything other than just dropping your photos into it. Please, please help if you can. I would be so grateful as Adobe customer service doesn't seem to know or care much about supporting this product.

Hi KDT
Yeah. I agree, if you are used to a situation where "it's on the cloud AND synced down to your hard disk where you can get it" Revel is not exactly that. There were legacy decisions behind that - most not as sinister as you might think but I won't bore you with those details. AND yes you are correct. We currently don't have any way for you to wholesale download everything at once. So you aren't missing anything. Until we provide that mechanism I can provide some guidance.
I'm going to assume you have the current version of Revel on your Mac which is 2.0.
The easiest thing for you to do will be to export your files manually. You can actually select a range of files and export. So it's not a one by one thing.
You'll have to decide how best to perform the selection based on your photography habits. If you tend to take batches of files surrounding specific dates. You could do it by date. In the date view (In the applications upper right "Showing: Dates"). If you look at the end of a date row you'll see a small grid. If you click that grid you are taking into a grid view of just that date. If you select all and file>export you'll export the contents of that date.
The other option is remaining in Grid view (In the applications upper right "Showing:Grid") and perform a shift+selection where you select your first file, move down the desired range and while holding shift you select a second file (standard multi-select stuff).
One thing to keep in mind as you do this. You'll notice when you export you can export original or 'current version'. Export original does just that. Exports unedited original versions of your images as they were uploaded to us. When you export the current version of an image we'll export a rendition of the edited image. This "current version" image is not the original and in most cases will be a rendition that is not the same size as the original. So keep that in mind as you proceed.
Not ideal, I fully realize, but I do hope it gets you closer to having your images back on your hard disk as you desire.
As for your subscription. Assure you have checked your iOS Appstore subscription settings and set Revel to not auto-renew. Unfortunately for a pro-rated refund on the subscription balance you no longer desire you'll need to work with Apple as they hold the purse strings for Appstore purchases. Refunds haven't been a problem in the past so you should have no issue.
Hope this helps.
Jason

Power Spike Threw My Network? PLEASE HELP!!!

Tuesday night we had a power spike that seems to have killed my network. I wanted to know has this happened tpo anyone else and if so how did you fix it. My problem is this,my ISP is Mediacom, I have a 10 MB connection, a Linksys WRT54GS V7 firmware 7.50.2 and I cannot get anything to connect to my wireless network. My pc that is wired into my router is fine. Getting good connection. I also have a Playstation 3 that connects wireless, Xbox 360 that connects wireless through a Linksys WGA54G, a pc that connects trough a Belkin wireless desktop card, and a Nintendo Wii that also connects wireless. Now Tuesday during the day everything was connected and fine. Wednesday I woke up to find that everything on my network had reset themselves and would no longer connect to the existing network. So I tried to reset everything on a new network. I couldn't get anything to connect. I replaced my router with the same model number and upgraded the firmware to v7.50.2. I called Mediacom and they reset my internet connection saying that my "modem was getting too many signals form my electronics and not my router"(?). Everything came up fine only to go down after about 5 mins (right after I tried to connect my PS3). Afterwards I called Mediacom back had them reset my connection and only tried my pc. It would connect but it would say little or no connectivity. Called Linksys support and a nice lady named Marie told me to change my from TKIP to AES change my channel to 11 and so forth and so on. It worked for about 5 mins and went down again. I called them back and again they changed my channel and lower my MTU. This time it would work but it was incredibly slow. Now I have no idea what to do and am quickly coming to my wit's end. Please help.
Message Edited by pugnacious_apbt on 09-13-2007 02:25 PM

I dunno dude. This is killing me. Mediacom won't help me because they don't support in home networks. I have never had a problem before now. I had the original router for almost a year. Power spikes are quite common throughout this area and it was always fine. Now all of a sudden I have this. I dunno what to do. I need all the help that I can get. I have never had a problem with any of my Linksys products. Just run the CD and plug in everything and I'm online. Simple. Lately I have seen more of my admin screen than I had ever hoped to.

Hi I am using outlook on windows xp and want to sync my email folders but cant do it please help

Hi I have gmail as my email provider to open in outlook but when I sync my
I Pad to it my folders dont transfer and the mail is all mixed up the new mail goes into my trash, it is all mixed up, could someone please help me with this.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

Problems with mount and unmount of network shares

Hi,
I use an Apple script to mount four network shares during startup of an OS 10.4.4 Powerbook. Unfortunately it seems that Tiger can't always mount them all. Sometimes it only mounts three of them, but pressing Command + K indicates that the fourth is already mounted because it's grayed out. How come I can't see it on neither the desktop nor the favorites list in a Finder window then?
I have a Tiger installation at home with Ciscos VPN Client 4.8 installed. I use that VPN client to gain access to the company's network. When the connection is established, I mount a share (with AFP over TCP/IP) on the company's server running Win2003 and ExtremeZ-IP.
When I close down Ciscos VPN Client, the mounted network share doesn't unmount automatically, and if I forget to toss that network drive in the trash before closing down or restarting my Mac, it hangs. Why can't it just unmount that drive automatically when the VPN connection is gone?
Regards
Thomas G. Madsen
Powermac G5 (2 x 1.8 Ghz) Mac OS X (10.4.4)

This may happens because broadcasts do not go through an IPSec tunnel.
Browsing Network Neighborhood is a function of the Microsoft browsing service. Any problems are usually because the PC or master browsers do not function properly. Network Neighborhood is officially not supported. However, it works if configured correctly. Browsing Network Neighborhood works by obtaining the browse list from either a master or backup browser. This list is obtained locally on your LAN by using NetBIOS Broadcasts to locate domain browsers.
Inorder to resove this :
Make sure you have NetBIOS over TCP enabled on the adapter that you use to connect to the domain.
Refer this related links:
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_tech_note09186a0080194b4a.shtml

Zyxel AG 225H & Mac Networking Challenge PLEASE HELP

Hello, trying to help a friend join network already established at her house. Office is about 200 yards from Linksys router, Zyxel AG 225H "reads" network from office location, so far so good. Following instructions, downloaded Mac drivers fm Zyxel site, loaded Zyxel unit into USB port but have been unable to proceed beyond the Zyxel scanning for networks to join (which it seems to do endlessly). AG 225H is supposed to act as adaptor enabling iMac to join wireless network. But it's not clear what the next steps are. Instructions with Zyxel are poor, their tech support not available again until Monday..
anyone have experience and can please help with suggestions? It's not clear if I need to do active configurations on the iMac in order to activate network.
My friend only has 9Gb (!!) of free hard drive space on iMac which I think could not be helping?
thank you
iMac Mac OS X (10.3.9) Zyxel AG225H, 768 Mb SDRAM, 800 Mhz PowerPC G4, 60 Gb Hard Drive

I hate to tell you 200 yards is a out of range for this connection the only way I am aware you can do this is to either run a cable or do the below to extend the range.
http://docs.info.apple.com/article.html?artnum=107454
This the reason it scans continuous and can't connect, it's out of range.
Don

I think someone HACKED into my Network..please help!

Hi,
I have a Powerbook, 4 years old,never had any trouble with network changes or losing control with settings.
Recently I was logged into Messenger and was disconnected with the message *+"you were disconnected because you were logged in at another device or terminal"+*. Which was very odd. I logged out and logged in again and it came up again shortly thereafter. Then I went into my System Preferences/Network and when it popped up a message said "Your network settings have been changed by another application". This definitely didn't smell right.
I'm the only one who controls the network settings,it's a home/internet network. I use a Mac Airport Base Station.
Please help with any insight or suggestions on how to change my settings back or what to do. Thank you.

BGreg wrote:
Yes, a closed network doesn't broadcast the name (SSID) of the network.
If you want to be absolutely sure somebody can't get into your network, enable the mac address control, which will only allow the defined systems to use your network.
Actually, the only setting that really matters is WPA.
The WPA layer is the most hack-proof security method, so if a hacker is good enough to get through WPA, no other layers will stop them. The hidden SSID can easily be sniffed out of the air and then accessed, and the MAC address filter can be evaded by, again, simply sniffing the transmissions and then cloning the MAC address of the client machine that's obviously allowed in, so that the router thinks the hacker's machine is your machine.
With WPA the one thing you have to do is use a password that isn't in any dictionary, since the only attack WPA is vulnerable to is a dictionary attack. If you can avoid that through the intelligent choice of a password, WPA is pretty solid, especially WPA2.

I am having some serious wireless networking issues - please help!

I had a working wireless network setup in my home until the laptop was dropped and the hard drive needed to be replaced. The network consists of the laptop, desktop and wireless printer. I am now unable to get my wireless network up and running again. Is there anybody that can walk me through this. Right now I have the laptop hardwired to the cable modem so I am able to use the internet.
Please help!!!!!!

1. Go to Wireless. Set using Manual Config.
    Mode = Mixed
    SSID = Create your own SSID
    Channel = 9
    Broadcast = Enabled
2.Go to Wireless Security
    Security = WPA Personal
    Passphrase = Type your 8 character long password
3. Go to Security. Disable Block/Filter WAN Request
4. Check if you are still online wired.
5. Connect your laptop to the wireless network
Regards,
Lord Maxthor

Wont let me into itunes store due to network settings, please help!

I previously had no problems with the store and have regularly purchased from it. Since going wireless I can no longer get in and now when I try through modem it doesn't work either.
I have flushed the DNS settings as advised, but, no joy. If anyone has any ideas please help me.

Try these;
1 - http://docs.info.apple.com/article.html?artnum=302182
2 - http://docs.info.apple.com/article.html?artnum=304082
3 - http://docs.info.apple.com/article.html?artnum=93434
4 - Check the firewall on your broadband router/modem.

Mounting folders within a network share ... please help!

Similar Messages

Maybe you are looking for