Mounting local filesystem - FAIL (yet the fs still mounts...) [SOLVED]
After modifying my time/date setup (setting the hardware clock to UTC, and using a custom timezone file) I started to get a [FAIL] message during boot (after the system had resynched to drive times to the system time), and shutdown.
@ boot time
Mounting local filesystem
Ext3-fs: barriers not enabled
kjournal starting. Commit interval 5 seconds
Ext3-fs (sda4): using internal journal
Ext3-fs (sda4): mounted filesystem with ordered data mode
[FAIL]
@ shutdown
Unmounting Filesystem [FAIL]
Nothing seems to be negatively affected, and the boot and shutdown processes continue without even pausing, and sda4 (my /home directory) certainly seems to by mounted (since I'm using it now).
I've run fsck at boot a couple times, but the drives keep coming back clean. I've tried using my old timezone setup, but the fail message persists. I've successfully unmounted and mounted sda4 as Root, trying to generate an error message of some kind, but all I get is a successfully unmounted, or mounted, drive. I've unmounted sda4 priod to shutdown as well, but the message persists.
The only place in the logs the [FAIL] message shows up is in /var/log/boot:
Mounting local filesystem [BUSY] [FAIL]
I'm at a loss. I would like to fix this, if only to be sure that it's not a symptom of a larger problem. At the very least, I'd like to know what is causing it.
Last edited by uxrs75 (2011-08-02 06:40:31)
You interpret correctly, Logicien. BIOS is set to UTC; HARDWARECLOCK="UTC". Time and date are a-ok.
I ran mkinitcpio -p kernel26, but the message persists. I also tried using the live cd, and mounting each of the drives in turn. All of them mounted successfully, with no error messages. To verify that it is sda4, I commented the sda4 line out in fstab, and rebooted the machine. I got:
Mounting Local Filesystems [FAIL]
but none of the Ext3-fs stuff, and the boot process continued successfully. I'm wondering if it's something else.
I'll try adding quiet to the kernel boot line later this evening and see what that brings about.
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="PST"
KEYMAP="uk"
CONSOLEFONT="ter-116n.psf.gz"
#CONSOLEMAP="8859-1"
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="darkstar"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network !netfs crond alsa mpd)
fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#none /proc/bus/usb usbfs auto,busgid=101,busmode=0775,devgid=101,devmode=0664 0 0
/dev/sr0 /media/sr0 auto ro,users,noauto,unhide 0 0
/dev/sr1 /media/sr1 auto ro,users,noauto,unhide 0 0
#/dev/sda1 /boot ext2 defaults 0 1
#/dev/sda2 swap swap defaults 0 0
#/dev/sda3 / ext3 defaults 0 1
#/dev/sda4 /home ext3 defaults 0 1
UUID=597bd99a-173b-4b23-947d-b8a50859bcdd /boot ext2 defaults 0 1
UUID=a51a3b55-7c5c-45bb-96eb-79cfd1a77f54 swap swap defaults 0 0
UUID=c6ecf0fe-d2c4-4743-b639-1550295b65c6 / ext3 defaults 0 1
UUID=ff7030b8-890a-4673-bd1c-f502ca5efb2b /home ext3 defaults 0 1
/dev/sdb1 /media/sdb1 auto noauto,owner,users 0 0
/dev/sdb1 /media/sdb1 auto noauto,owner,users 0 0
/dev/sdc1 /media/sdc1 auto noauto,owner,users 0 0
/dev/sdd1 /media/sdd1 auto noauto,owner,users 0 0
/dev/sde1 /media/sde1 auto noauto,owner,users 0 0
/dev/sdf1 /media/sdf1 auto noauto,owner,users 0 0
fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 1 208844 104422 83 Linux
/dev/sda2 208845 738989 265072+ 82 Linux swap / Solaris
/dev/sda3 738990 103153364 51207187+ 83 Linux
/dev/sda4 103153365 976768064 436807350 83 Linux
dumpe2fs -h /dev/sda1
dumpe2fs 1.41.14 (22-Dec-2010)
Filesystem volume name: <none>
Last mounted on: <not available>
Filesystem UUID: 597bd99a-173b-4b23-947d-b8a50859bcdd
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: ext_attr resize_inode dir_index filetype sparse_super
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: not clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 26208
Block count: 104420
Reserved block count: 5221
Free blocks: 84721
Free inodes: 26177
First block: 1
Block size: 1024
Fragment size: 1024
Reserved GDT blocks: 256
Blocks per group: 8192
Fragments per group: 8192
Inodes per group: 2016
Inode blocks per group: 252
Filesystem created: Fri Apr 30 20:35:47 2010
Last mount time: Thu Aug 19 05:44:48 2010
Last write time: Mon Aug 1 13:58:14 2011
Mount count: 8
Maximum mount count: 23
Last checked: Mon Aug 1 07:23:24 2011
Check interval: 15552000 (6 months)
Next check after: Sat Jan 28 07:23:24 2012
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 128
Default directory hash: half_md4
Directory Hash Seed: f5f22ff8-0cb1-4c30-a172-ead082f0ad8a
dumpe2fs -h /dev/sda3
dumpe2fs 1.41.14 (22-Dec-2010)
Filesystem volume name: <none>
Last mounted on: <not available>
Filesystem UUID: c6ecf0fe-d2c4-4743-b639-1550295b65c6
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 3203072
Block count: 12801796
Reserved block count: 640089
Free blocks: 10487133
Free inodes: 3000642
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 1020
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 8192
Inode blocks per group: 512
Filesystem created: Fri Apr 30 20:35:51 2010
Last mount time: Mon Aug 1 13:58:14 2011
Last write time: Mon Aug 1 07:22:14 2011
Mount count: 8
Maximum mount count: 23
Last checked: Mon Aug 1 07:22:14 2011
Check interval: 15552000 (6 months)
Next check after: Sat Jan 28 07:22:14 2012
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Journal inode: 8
First orphan inode: 262152
Default directory hash: half_md4
Directory Hash Seed: 08e3f2db-7bb4-41fc-9364-9a9f637951ff
Journal backup: inode blocks
Journal features: journal_incompat_revoke
Journal size: 128M
Journal length: 32768
Journal sequence: 0x0007df4e
Journal start: 1
dumpe2fs -h /dev/sda4
dumpe2fs 1.41.14 (22-Dec-2010)
Filesystem volume name: <none>
Last mounted on: <not available>
Filesystem UUID: ff7030b8-890a-4673-bd1c-f502ca5efb2b
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 27303936
Block count: 109201837
Reserved block count: 5460091
Free blocks: 80860937
Free inodes: 27074933
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 997
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 8192
Inode blocks per group: 512
Filesystem created: Fri Apr 30 20:36:07 2010
Last mount time: Mon Aug 1 13:58:14 2011
Last write time: Mon Aug 1 13:58:14 2011
Mount count: 8
Maximum mount count: 25
Last checked: Mon Aug 1 07:23:25 2011
Check interval: 15552000 (6 months)
Next check after: Sat Jan 28 07:23:25 2012
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Journal inode: 8
Default directory hash: half_md4
Directory Hash Seed: e8dbb219-f7fe-4878-96b6-9137361ce1e2
Journal backup: inode blocks
Journal features: journal_incompat_revoke
Journal size: 128M
Journal length: 32768
Journal sequence: 0x0011b560
Journal start: 1
Last edited by uxrs75 (2011-08-02 06:19:11)
Similar Messages
-
When i try to sync my iphone 5c to my itunes it says my computer is not authorized. I've gone through the authorize steps and restarted my computer. It says "already authorized," yet the phone still won't sync saying, "computer unauthorized."
Click here and follow the instructions.
(91121) -
I have set form fields as User required and yet the form still prints/save when empty.
I have set form fields as User required and yet the form still prints/save when empty. I also have an email button on the form but that works correctly by not allowing the user to email the form with the required fields empty.
What script do I need to additionally restrict both printing and saving if the required fields are empty?
You would think that just setting that option would restrict those functions the same as it does for the email button.
Please be specific with your response if you are gracious enough to offer one. I have been searching the forum all morning for the answer to this and I really didn't understand any of the solutions offered to others enough to use those in my own form.
The required fields are:
Social (social security number)
Name
Headquarters
Residence
The next question I have is if there is a way to make individual signature fields mandatory if they are digital signatures?
In other words, I don't want the individual to be able to email the form to the next person if he/she hasn't applied their digital signature.Saving can always be done, even when mandatory fields are empty. This is by design. And that is correct. Suppose you have a big form and 2 people need to fill it out. How can you fill out a first part and then send it to the second person without saving.
Same for printing. Same for your signature fields.
What I would do, is to put a "watermark" on the form that you show on preSave and prePrint if the form is incomplete. Just a static text on your form. Then the user will see that they need to do more. Also, on preSave and prePrint, you can show a warning popup to tell the user about the missing fields. You can then still cancel their action if the user decides not to save/print anyway. -
My macbook pro is already authorized, but a purchased song from iTunes keeps stating that my computer is not authorized to play it. I enter my apple ID and password, upon which a window confirms that my computer is already authorized. Yet the song still won't play and continues to state that my computer is not authorized.
If you live in a country in which you are allowed to re-download purchased music delete the track from the library and the HDD and re-download it.
-
why since i have upgraded iphone to io7 and upgraded itunes to the latest version that when i sync my iphone 5 with playlists the playlist are emplty yet the content still resides in itunes thgis is ******* me off as i have to use a playlist tomorrow
problem fixed when i updated iTunes with the latest update 11.1.1.11
-
hi, when i plug my iPod mini into my lap top nothing shows up on my screen but yet the device still charges? help
Hello rkguy71,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Have a nice day,
Mario -
Loading Modules and Mounting Local Filesystems failed during boot
Hi all,
since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
[gianluca@gianluca-laptop ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
[ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
[ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 7bb8d000 00040
[ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1092MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba60
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506587
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2185 pages used for memmap
[ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8109824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
[ 0.000000] Hardware name: Aspire 1810TZ
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
[ 0.000000] Call Trace:
[ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
[ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
[ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
[ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
[ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
[ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
[ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
[ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
[ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
[ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
[ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
[ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.656 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003415] Security Framework initialized
[ 0.003422] AppArmor: AppArmor disabled by boot time parameter
[ 0.003458] Mount-cache hash table entries: 512
[ 0.003763] Initializing cgroup subsys ns
[ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003772] Initializing cgroup subsys cpuacct
[ 0.003793] Initializing cgroup subsys memory
[ 0.003809] Initializing cgroup subsys devices
[ 0.003813] Initializing cgroup subsys freezer
[ 0.003816] Initializing cgroup subsys net_cls
[ 0.003819] Initializing cgroup subsys blkio
[ 0.003876] CPU: Physical Processor ID: 0
[ 0.003879] CPU: Processor Core ID: 0
[ 0.003883] mce: CPU supports 6 MCE banks
[ 0.003894] CPU0: Thermal monitoring enabled (TM2)
[ 0.003899] using mwait in idle threads.
[ 0.005672] ACPI: Core revision 20110316
[ 0.016682] ftrace: allocating 15225 entries in 30 pages
[ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
[ 0.100017] Booting Node 0, Processors #1
[ 0.100021] smpboot cpu 1: start_ip = 9a000
[ 0.006666] Initializing CPU#1
[ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203327] Brought up 2 CPUs
[ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
[ 0.204780] devtmpfs: initialized
[ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
[ 0.206812] print_constraints: dummy:
[ 0.206898] NET: Registered protocol family 16
[ 0.207056] ACPI: bus type pci registered
[ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.207209] PCI: Using MMCONFIG for extended config space
[ 0.207212] PCI: Using configuration type 1 for base access
[ 0.207951] bio: create slab <bio-0> at 0
[ 0.211250] ACPI: EC: Look up EC in DSDT
[ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.218783] ACPI: Dynamic OEM Table Load:
[ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.219702] ACPI: Dynamic OEM Table Load:
[ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.237838] ACPI: Dynamic OEM Table Load:
[ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.247515] ACPI: Dynamic OEM Table Load:
[ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.257074] ACPI: Interpreter enabled
[ 0.257081] ACPI: (supports S0 S3 S4 S5)
[ 0.257124] ACPI: Using IOAPIC for interrupt routing
[ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.265982] ACPI: No dock devices found.
[ 0.265985] HEST: Table not found.
[ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.267613] DMAR: Forcing write-buffer flush capability
[ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
[ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
[ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.296698] pci 0000:00:1a.7: PME# disabled
[ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.296852] pci 0000:00:1b.0: PME# disabled
[ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.296974] pci 0000:00:1c.0: PME# disabled
[ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.297105] pci 0000:00:1c.3: PME# disabled
[ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
[ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.328828] pci 0000:00:1d.7: PME# disabled
[ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
[ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
[ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
[ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.329274] pci 0000:00:1f.2: PME# disabled
[ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
[ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
[ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
[ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.329653] pci 0000:01:00.0: PME# disabled
[ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
[ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
[ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.333671] pci 0000:02:00.0: PME# disabled
[ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.340186] pci_bus 0000:00: on NUMA node 0
[ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.349232] vgaarb: loaded
[ 0.349386] PCI: Using ACPI for IRQ routing
[ 0.349389] PCI: pci_cache_line_size set to 64 bytes
[ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
[ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
[ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
[ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.349695] NetLabel: Initializing
[ 0.349698] NetLabel: domain hash size = 128
[ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.349720] NetLabel: unlabeled traffic allowed by default
[ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.359999] Switching to clocksource hpet
[ 0.363178] Switched to NOHz mode on CPU #0
[ 0.363276] Switched to NOHz mode on CPU #1
[ 0.370116] pnp: PnP ACPI init
[ 0.370143] ACPI: bus type pnp registered
[ 0.370722] pnp 00:00: [bus 00-ff]
[ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.371140] pnp 00:01: [io 0x002e-0x002f]
[ 0.371144] pnp 00:01: [io 0x004e-0x004f]
[ 0.371148] pnp 00:01: [io 0x164e-0x164f]
[ 0.371151] pnp 00:01: [io 0x0061]
[ 0.371154] pnp 00:01: [io 0x0070]
[ 0.371157] pnp 00:01: [io 0x0080]
[ 0.371160] pnp 00:01: [io 0x0092]
[ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.371167] pnp 00:01: [io 0x0063]
[ 0.371170] pnp 00:01: [io 0x0065]
[ 0.371173] pnp 00:01: [io 0x0067]
[ 0.371176] pnp 00:01: [io 0x0600-0x060f]
[ 0.371180] pnp 00:01: [io 0x0610]
[ 0.371183] pnp 00:01: [io 0x0800-0x080f]
[ 0.371186] pnp 00:01: [io 0x0810-0x0817]
[ 0.371190] pnp 00:01: [io 0x0820-0x0823]
[ 0.371193] pnp 00:01: [io 0x0400-0x047f]
[ 0.371196] pnp 00:01: [io 0x0500-0x053f]
[ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.371377] system 00:01: [io 0x0610] has been reserved
[ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371471] pnp 00:02: [io 0x0000-0x001f]
[ 0.371474] pnp 00:02: [io 0x0081-0x0091]
[ 0.371478] pnp 00:02: [io 0x0093-0x009f]
[ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
[ 0.371485] pnp 00:02: [dma 4]
[ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371576] pnp 00:03: [io 0x0070-0x0077]
[ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371735] pnp 00:04: [irq 0 disabled]
[ 0.371750] pnp 00:04: [irq 8]
[ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371828] pnp 00:05: [io 0x00f0]
[ 0.371835] pnp 00:05: [irq 13]
[ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.371991] pnp 00:07: [io 0x0060]
[ 0.371995] pnp 00:07: [io 0x0064]
[ 0.372003] pnp 00:07: [irq 1]
[ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372090] pnp 00:08: [irq 12]
[ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
[ 0.372300] pnp: PnP ACPI: found 9 devices
[ 0.372303] ACPI: ACPI bus type pnp unregistered
[ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
[ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
[ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
[ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
[ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
[ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.410023] NET: Registered protocol family 2
[ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411366] TCP reno registered
[ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411559] NET: Registered protocol family 1
[ 0.411580] pci 0000:00:02.0: Boot video device
[ 0.440052] PCI: CLS 64 bytes, default 64
[ 0.440120] Unpacking initramfs...
[ 0.493687] Freeing initrd memory: 1728k freed
[ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.494439] Simple Boot Flag at 0x44 set to 0x1
[ 0.494754] apm: BIOS not found.
[ 0.494943] audit: initializing netlink socket (disabled)
[ 0.494958] type=2000 audit(1312551622.493:1): initialized
[ 0.495391] highmem bounce pool size: 64 pages
[ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.498715] VFS: Disk quotas dquot_6.5.2
[ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.499018] msgmni has been set to 1714
[ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499357] io scheduler noop registered
[ 0.499361] io scheduler deadline registered
[ 0.499380] io scheduler cfq registered (default)
[ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 0.500070] intel_idle: MWAIT substates: 0x22220
[ 0.500074] intel_idle: does not run on family 6 model 23
[ 0.500082] ERST: Table is not found!
[ 0.500103] isapnp: Scanning for PnP cards...
[ 0.857044] isapnp: No Plug & Play device found
[ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
[ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.072099] mousedev: PS/2 mouse device common for all mice
[ 1.072185] rtc_cmos 00:03: RTC can wake from S4
[ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.086887] cpuidle: using governor ladder
[ 1.086890] cpuidle: using governor menu
[ 1.087261] TCP cubic registered
[ 1.087265] NET: Registered protocol family 17
[ 1.087276] Registering the dns_resolver key type
[ 1.087307] Using IPI No-Shortcut mode
[ 1.087437] PM: Hibernation image not present or could not be loaded.
[ 1.087445] registered taskstats version 1
[ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
[ 1.088039] Initializing network drop monitor service
[ 1.088128] Freeing unused kernel memory: 512k freed
[ 1.088469] Write protecting the kernel text: 3380k
[ 1.088507] Write protecting the kernel read-only data: 1028k
[ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106227] udevd[54]: starting version 171
[ 1.236052] SCSI subsystem initialized
[ 1.269724] libata version 3.00 loaded.
[ 1.282619] ahci 0000:00:1f.2: version 3.0
[ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.282767] ahci: SSS flag set, parallel bus scan disabled
[ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
[ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.301035] scsi0 : ahci
[ 1.301194] scsi1 : ahci
[ 1.301318] scsi2 : ahci
[ 1.301438] scsi3 : ahci
[ 1.301557] scsi4 : ahci
[ 1.301679] scsi5 : ahci
[ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
[ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
[ 1.301782] ata3: DUMMY
[ 1.301784] ata4: DUMMY
[ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
[ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
[ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
[ 1.496717] Switching to clocksource tsc
[ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.788946] ata1.00: configured for UDMA/133
[ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
[ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.798506] sda: sda1 sda2 sda3 sda4
[ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.653828] udevd[228]: starting version 173
[ 4.958869] ACPI: acpi_idle registered with cpuidle
[ 4.959125] Monitor-Mwait will be used to enter C-1 state
[ 4.959159] Monitor-Mwait will be used to enter C-2 state
[ 4.959167] Marking TSC unstable due to TSC halts in idle
[ 4.959208] Switching to clocksource hpet
[ 5.052561] fuse init (API version 7.16)
[ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
[ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
[ 5.377790] Linux agpgart interface v0.103
[ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
[ 5.389644] wmi: Mapper loaded
[ 5.390172] iTCO_vendor_support: vendor-support=0
[ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.532424] ACPI: Power Button [PWRB]
[ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
[ 5.554953] ACPI: Lid Switch [LID0]
[ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.555072] ACPI: Sleep Button [SLPB]
[ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.555173] ACPI: Power Button [PWRF]
[ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
[ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.602755] usbcore: registered new interface driver usbfs
[ 5.602793] usbcore: registered new interface driver hub
[ 5.606733] usbcore: registered new device driver usb
[ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.691336] hub 1-0:1.0: USB hub found
[ 5.691345] hub 1-0:1.0: 2 ports detected
[ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
[ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.723603] hub 2-0:1.0: USB hub found
[ 5.723610] hub 2-0:1.0: 6 ports detected
[ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 5.814571] hub 3-0:1.0: USB hub found
[ 5.814580] hub 3-0:1.0: 2 ports detected
[ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 5.824221] hub 4-0:1.0: USB hub found
[ 5.824230] hub 4-0:1.0: 2 ports detected
[ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 5.836988] hub 5-0:1.0: USB hub found
[ 5.836995] hub 5-0:1.0: 2 ports detected
[ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 5.846997] hub 6-0:1.0: USB hub found
[ 5.847004] hub 6-0:1.0: 2 ports detected
[ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.909784] [drm] Initialized drm 1.1.0 20060810
[ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
[ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.022599] i915 0000:00:02.0: setting latency timer to 64
[ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
[ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
[ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
[ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.071626] [drm] Driver supports precise vblank timestamp query.
[ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
[ 6.236889] Registered led device: phy0-led
[ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 6.507822] Linux media interface: v0.10
[ 6.580021] Linux video capture interface: v2.00
[ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 6.608368] usbcore: registered new interface driver uvcvideo
[ 6.608371] USB Video Class driver (v1.0.0)
[ 6.624890] fbcon: inteldrmfb (fb0) is primary device
[ 6.671041] Console: switching to colour frame buffer device 170x48
[ 6.678170] fb0: inteldrmfb frame buffer device
[ 6.678173] drm: registered panic notifier
[ 6.679734] acpi device:03: registered as cooling_device2
[ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.802470] hda_codec: ALC269: BIOS auto-probing.
[ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
[ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
[ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
[ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
[ 12.647209] /dev/vmci[905]: Module vmci: initialized
[ 12.827251] ppdev: user-space parallel port driver
[ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
[ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 13.786521] /dev/vmnet: port on hub 1 successfully opened
[ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
[ 13.801452] /dev/vmnet: port on hub 1 successfully opened
[ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
[ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 13.854720] /dev/vmnet: port on hub 8 successfully opened
[ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
[ 13.915881] /dev/vmnet: port on hub 8 successfully opened
[ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
[ 13.936317] /dev/vmnet: port on hub 8 successfully opened
[ 38.702663] NET: Registered protocol family 10
[ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
[ 48.976756] vmnet8: no IPv6 routers present
[ 49.523376] vmnet1: no IPv6 routers present
[ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 105.127031] wlan0: authenticated
[ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 105.140396] wlan0: associated
[ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 105.447150] /dev/vmnet: port on hub 0 successfully opened
[ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
[ 105.447181] bridge-wlan0: up
[ 105.448675] bridge-wlan0: attached
[ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
[ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
[ 107.423712] bridge-wlan0: disabling the bridge
[ 107.440034] bridge-wlan0: down
[ 107.440043] bridge-wlan0: detached
[ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.440157] /dev/vmnet: port on hub 0 successfully opened
[ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
[ 107.440177] bridge-wlan0: up
[ 107.440182] bridge-wlan0: attached
[ 107.860411] bridge-wlan0: disabling the bridge
[ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 107.872071] wlan0: authenticated
[ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 107.875417] wlan0: associated
[ 107.876696] bridge-wlan0: down
[ 107.876705] bridge-wlan0: detached
[ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.904409] /dev/vmnet: port on hub 0 successfully opened
[ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
[ 107.904428] bridge-wlan0: up
[ 107.905917] bridge-wlan0: attached
[ 118.910106] wlan0: no IPv6 routers present
This is the output of /var/log/boot
Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: Starting VMware services:
Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
What could be the problem?
ThanksWed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
Wed Aug 10 08:49:15 2011: Starting VMware services:
Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
Ok, I still have that fail during the 'Mounting Local Filesystems'.
If there isn't the swap partition it should be something else from my fstab..
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
But I can't find anything that looks unusual into my /etc/fstab -
The screen on my iPhone 5 is blank yet the phone still works. What's the issue?
I think a recent downpour has caused some issues with my iPhone 5....
The phone (inc' speaker/microphone) still works but the screen doesn't light up. When I shine a torch on it I can see that it is still displaying everything, but it doesn't light up. As my phone is out of warranty (and in the UK) what needs to be replaced in order to resolve the issue? Would it just be the the screen and digitizer or the mainboard?
Thanks for your time.diesel
I tried that one first but no joy.
paul
TVM. I think I'm just going to have to shell out for a new screen and see. I'll reply afterwards with results.
Thanks guys. -
Import.py runs fine locally, but fails on the remote server
I have the following import.py file (from The Definitive Guide to SOA Oracle Service Bus), which I am calling from an ANT script. It runs fine when I include the parameters for the server running on my machine, but when I change the params to our test server, it connects to the server, but can't create a session. I will include the output of both runs as well. The test server runs on a cluster. Does that make a difference?
LOCAL OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
local.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : local.import.properties
[java] Connecting to t3://localhost:7001 with userid weblogic ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'alsb_domain'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : t3://localhost:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884174250
[java] finding service...
[java] creating session...
[java] return SessionMBean...
[java] SessionMBean started session
[java] ALSBConfiguration MBean found [MBeanServerInvocationHandler]com.bea:Name=ALSBConfiguration.SessionScript1236884174250,Type=com.bea.wli.sb.management.configuration.ALSBConfigurationMBean
[java] Jar Uploaded
[java] ALSB project crash_alsb will get overlaid
[java] Default importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 22900920>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 23950494>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 16994189>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6011310>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 33251361>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6566192>
[java] Modified importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] Deployment of : crash-alsb-20090205.jar successful
BUILD SUCCESSFUL
Total time: 8 seconds
TEST SERVER OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
remote.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : remote.import.properties
[java] Connecting to http://<IP removed>:7001 with userid <userid removed> ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'WL-DEV'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : http://<IP removed>:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884107843
[java] finding service...
[java] null returned from findService method.
[java] creating session...
[java] Unexpected error: exceptions.AttributeError
[java] Unexpected error: exceptions.AttributeError
[java] No stack trace available.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 212, in ?
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 130, in importToALSBDomain
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 197, in getSessionMBean
[java] AttributeError: 'None' object has no attribute 'createSession'
[java] Java Result: 1
BUILD SUCCESSFUL
Total time: 14 seconds
import.py
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.io import FileInputStream
#from com.bea.wli.config import TypeIds
from com.bea.wli.sb.util import Refs
from com.bea.wli.config.customization import Customization
from com.bea.wli.sb.management.importexport import ALSBImportOperation
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
import sys
#=======================================================================================
# Entry function to deploy project configuration and resources
# into a ALSB domain
#=======================================================================================
def importToALSBDomain(importConfigFile):
try:
SessionMBean = None
print 'Loading Deployment config from :', importConfigFile
exportConfigProp = loadProps(importConfigFile)
adminUrl = exportConfigProp.get("adminUrl")
importUser = exportConfigProp.get("importUser")
importPassword = exportConfigProp.get("importPassword")
importJar = exportConfigProp.get("importJar")
customFile = exportConfigProp.get("customizationFile")
passphrase = exportConfigProp.get("passphrase")
project = exportConfigProp.get("project")
connectToServer(importUser, importPassword, adminUrl)
print 'Attempting to import :', importJar, "on ALSB Admin Server listening on :", adminUrl
theBytes = readBinaryFile(importJar)
print 'Read file', importJar
sessionName = createSessionName()
print 'Created session name ', sessionName
SessionMBean = getSessionMBean(sessionName)
print 'SessionMBean started session'
ALSBConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
print "ALSBConfiguration MBean found", ALSBConfigurationMBean
ALSBConfigurationMBean.uploadJarFile(theBytes)
print 'Jar Uploaded'
if project == None:
print 'No project specified, additive deployment performed'
importResult = ALSBConfigurationMBean.importUploaded(None, false, true, passphrase)
SessionMBean.commitSession(sessionName)
else:
print 'ALSB project', project, 'will get overlaid'
alsbJarInfo = ALSBConfigurationMBean.getImportJarInfo()
alsbImportPlan = alsbJarInfo.getDefaultImportPlan()
alsbImportPlan.setPassphrase(passphrase)
operationMap=HashMap()
operationMap = alsbImportPlan.getOperations()
print
print 'Default importPlan'
printOpMap(operationMap)
set = operationMap.entrySet()
alsbImportPlan.setPreserveExistingEnvValues(true)
#boolean
abort = false
#list of created ref
createdRef = ArrayList()
for entry in set:
ref = entry.getKey()
op = entry.getValue()
#set different logic based on the resource type
type = ref.getTypeId
print 'got a ref TypeId of ', type
if type == Refs.SERVICE_ACCOUNT_TYPE or type == Refs.SERVICE_PROVIDER_TYPE:
if op.getOperation() == ALSBImportOperation.Operation.Create:
print 'Unable to import a service account or a service provider on a target system', ref
abort = true
elif op.getOperation() == ALSBImportOperation.Operation.Create:
#keep the list of created resources
createdRef.add(ref)
if abort == true :
print 'This jar must be imported manually to resolve the service account and service provider dependencies'
SessionMBean.discardSession(sessionName)
raise
print
print 'Modified importPlan'
printOpMap(operationMap)
importResult = ALSBConfigurationMBean.importUploaded(alsbImportPlan)
printDiagMap(importResult.getImportDiagnostics())
if importResult.getFailed().isEmpty() == false:
print 'One or more resources could not be imported properly'
raise
#customize if a customization file is specified
#affects only the created resources
if customFile != None :
print 'Loading customization File', customFile
print 'Customization applied to the created resources only', createdRef
iStream = FileInputStream(customFile)
customizationList = Customization.fromXML(iStream)
filteredCustomizationList = ArrayList()
setRef = HashSet(createdRef)
# apply a filter to all the customizations to narrow the target to the created resources
for customization in customizationList:
print customization
newcustomization = customization.clone(setRef)
filteredCustomizationList.add(newcustomization)
ALSBConfigurationMBean.customize(filteredCustomizationList)
#SessionMBean.commitSession(sessionName)
SessionMBean.activateSession(sessionName,"active session from import.py")
print "Deployment of : " + importJar + " successful"
except:
print "Unexpected error:", sys.exc_info()[0]
if SessionMBean != None:
SessionMBean.discardSession(sessionName)
raise
#=======================================================================================
# Utility function to print the list of operations
#=======================================================================================
def printOpMap(map):
set = map.entrySet()
for entry in set:
op = entry.getValue()
print op.getOperation(),
ref = entry.getKey()
print ref
print
#=======================================================================================
# Utility function to print the diagnostics
#=======================================================================================
def printDiagMap(map):
set = map.entrySet()
for entry in set:
diag = entry.getValue().toString()
print diag
print
#=======================================================================================
# Utility function to load properties from a config file
#=======================================================================================
def loadProps(configPropFile):
propInputStream = FileInputStream(configPropFile)
configProps = Properties()
configProps.load(propInputStream)
return configProps
#=======================================================================================
# Connect to the Admin Server
#=======================================================================================
def connectToServer(username, password, url):
connect(username, password, url)
domainRuntime()
#=======================================================================================
# Utility function to read a binary file
#=======================================================================================
def readBinaryFile(fileName):
file = open(fileName, 'rb')
bytes = file.read()
return bytes
#=======================================================================================
# Utility function to create an arbitrary session name
#=======================================================================================
def createSessionName():
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
return sessionName
#=======================================================================================
# Utility function to load a session MBeans
#=======================================================================================
def getSessionMBean(sessionName):
#SessionMBean = findService("Session","com.bea.wli.config.mbeans.SessionMBean")
print "finding service..."
SessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
if SessionMBean == None:
print "null returned from findService method."
print "creating session..."
SessionMBean.createSession(sessionName)
print "return SessionMBean..."
return SessionMBean
# IMPORT script init
try:
# import the service bus configuration
# argv[1] is the export config properties file
importToALSBDomain(sys.argv[1])
except:
print "Unexpected error: ", sys.exc_info()[0]
dumpStack()
raiseYour Template code is messed up.
Use the code validation tools below and fix reported errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Then post your Revised Template.dwt code. Once the editable regions are positioned properly, your child pages should perform better.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
After trial I have paid for lightroom yet the app still asks me to pay? What should I do?
My trial finished so I paid monthly rate for lightroom, yet it asks me to buy all the time. I have received the invoice! How to run lightroom?
DomGol if you have a purchased license then it may be that there is a connection error between the computer and our activation server. You can find details on how to resolve the connection error at Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.
-
If I buy a sim free phone here and take it to the Ukraine with me, can I get a card there in the Ukraine to use the phone with. If that is possible, when I return to the states can I get an AT & T sim card and the same phone work in the states? Thanks in advance for your help.
If you buy an unlocked phone, it will work on any compatible GSM network anywhere in the world. If you buy an unlocked phone in the US, it will not work on LTE networks outside of North America. The warranty is also only valid in the country where the phone was originally sold.
-
Automatic certificate enrollment for local system failed (0x800706ba) The RPC server is unavailable.
I have a lot of background on this question so bear with me please. :)
I am tasked with getting our domain from 2003 to 2008 level. In order to do that I brought up a 2008 R2 server into the domain and did dcpromo to get it to "play" with the two other 2003 DCs. All is working pretty well except that I'm getting the auto-enrollment
error above not because of a configuration error but because before I even came to work here the Root CA machine was taken out of service and disposed of! So the unable to contact is a true error. The machine no longer exists! I'm sure I'll have to re-setup
a Root CA but wanted some guidance on the path to take on getting from where I am (broke!) to back to healthy!
thanks in advance,
LeoHi Vadims,
I do have exactly the same problem as described above. The Root CA no longer exist and the certificates are about to expire, however I have checked the expiration date of the certificate using certmgr in the AD servers (Three server cluster) and I have found
different expiring dates for the same certificate as described bellow.
Trusted Root Certification Authorities > CONTOSO-CA (exp 17/05/2018)
Intermediate Certification Authorities > CONTOSO-CA (exp 17/05/2018)
Active directory User Object > CONTOSO-CA (exp 17/05/2014)
We currently have an AD cluster conformed by three Windows server 2008 and no currently Certificate Authority role installed on any of them.
I also have seen using certmgr that all machines in the company have the certificate CONTOSO-CA in the following way:
Trusted Root Certification Authorities > CONTOSO-CA (exp 17/05/2018)
Intermediate Certification Authorities > CONTOSO-CA (exp 17/05/2018)
Active directory User Object > Not present
My question is, can I safely decommission the certificate following the procedure stated above (step 6)? what will be the impact of this certificate (Active directory user object) expiring?
Thanks in advance
Cesar -
Audio tracks locked yet the track still gets bumped out
I'm editing a music video. I put the audio track for the song onto the first/second line of the timeline and locked the tracks. Then I added a video clip and the audio for that bumped the locked audio out of the other lines! It's never done that for me before, how do I get it to QUIT?
Hi,
Assuming that you really locked the audio track (see the diagonal lines running all along the locked track):
!http://i533.photobucket.com/albums/ee340/gogiangigo/lockedaudio.jpg!
you might be experiencing some bizarre behavior, which [trashing the preferences|http://www.digitalrebellion.com/pref_man.htm] could fix.
Try that,
G. -
BUILD FAILED: Install the Schema (FOD.zip) -- Solved
Buildfile: J:\fod\Infrastructure\Ant\build.xml
createDatabase:
refreshSchema:
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 9 of 9 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
createSchemaObjects:
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\createFODSchemaObjects.sql
[sql] 475 of 475 SQL statements executed successfully
createSequenceTriggers:
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\createSequenceTriggers.sql
[sql] 19 of 19 SQL statements executed successfully
populateTables:
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 4 of 4 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[echo] Demo Options Created
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\AVAILABLE_LANGUAGES.sql
[sql] 4 of 4 SQL statements executed successfully
[echo] Available Languages Created
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 244 of 244 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 244 of 244 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 244 of 244 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 244 of 244 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[echo] Country Codes Created
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 52 of 52 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 52 of 52 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 52 of 52 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[sql] 52 of 52 SQL statements executed successfully
[delete] Deleting: J:\fod\Infrastructure\DBSchema\Scripts\SQLRunner895321461.sql
[echo] Lookup Codes Created
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\ADDRESSES.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\DISCOUNTS_BASE.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\MEMBERSHIPS_BASE.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\SHIPPING_OPTIONS_BASE.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\SUPPLIERS.sql
[sql] 156 of 156 SQL statements executed successfully
[echo] Addresses, Memberships, Discounts, Shipping Options and Suppliers Created
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\DISCOUNT_TRANSLATIONS.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\ELIGIBLE_DISCOUNTS.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\MEMBERSHIP_TRANSLATIONS.sql
[sql] Executing file: J:\fod\Infrastructure\DBSchema\Scripts\DataScripts\PERSONS.sql
[sql] Failed to execute: INSERT INTO persons VALUES ( 102 , 'LDEHAAN' , NULL , 'Lex' , 'De Haan' , 'STAFF' , 'Y' , 3 , NULL , NULL , 'LDEHAAN' , 'LDEHAAN' , '515.123.4569' , NULL , NULL , TO_DATE('13-JAN-1963', 'dd-MON-yyyy') , 'MARR' , 'M' , NULL , NULL , NULL , 'Y' , 'Y' , '0' , SYSDATE , '0' , SYSDATE , '1' )
BUILD FAILED
J:\fod\Infrastructure\Ant\build.xml:16: The following error occurred while executing this line:
J:\fod\Infrastructure\DBSchema\build.xml:159: java.sql.SQLException: ORA-01843: mes no válido
Technology used: JDeveloper11g
Tks.
Message was edited by:
Alberto Ayalain PERSONS.sql
TO_DATE('03-JAN-1960', 'dd-MON-yyyy')
JAN no is admitid by INSERT... -
Any one can HELP on this since last month Sept until now cannot back up my Iphone4 DATA.
Ok. Found something that said to shut down and hold the option, command, p, and r keys on restart. Held them down for a few restarts and everything automatically signed in and works. Woohoo!!!
Maybe you are looking for
-
Reg: Delivery complition indicator
Hi All, Would you please help to confirm how to terminate a open return PO? And whatu2019s the impact of Finance view? The return PO could be for u201Cgoods returnu201D or u201Ccost center assignment w/o physical goods returnu201D. Whatu2019s the imp
-
Hello , I need a hitlist of customer programms with the most numbers of lines, or programmes with more than 5.000 lines of coding. Is there a table ? Which table holds the coding ? Thanks for any answer you know. Cheers Simone
-
Archive an existing iWeb website?
What's the best way to take an existing iWeb-created website & save *the entire thing* for offline viewing? Background: I'm about to restructure my family website, but my wife wants me to save "a copy" of the current website for posterity. I've tried
-
Anyone know of a fix after updating the last ios...ipad keeps restarting or won't stay on. Very aggravating.
-
How to monitor weblogic is hanging?
Hi guys, i'm a system admin, i run jsp on weblogic6.1. for some unknown reasons the server will be hanging. so i have to restart the weblogic. 1) how can i identify the server is hanging? is there any java code can monitor the server? 2) how can i tr