Mounting the same VHDX from 2 simultaneous user sessions?

Hi,
I need to mount the same VHD or VHDX file from 2 different user sessions. My file is BitLocker-encrypted, NTFS-formatted (I can reformat to an other filesystem if needed). It resides on a network location, a samba share. My scenario is the following:
user #1 logs on and mounts the VHDX file, is prompted for the password
user #2 logs on and mounts the same VHDX file, is also prompted for the password
Is it possible? Both users read/write to the VHDX concurrently. Do VHDX/BitLocker/NTFS support this?
If that doesn't work and if you have any alternate option/approach, please let me know. The VHD/VHDX file holds sensitive data, and is backed up on a regular basis.
Thank you!

Hi,
Please see the detailed steps mentioned in the following link, it is possible to auto-mount the VHD at startup\logon, but since you have enabled bitlocker, so it's recommended to add a time delay on the task scheduler or script\batch file to first unlock
the bitlocker, then mount the file
http://www.eightforums.com/tutorials/20342-vhd-auto-mount-startup-windows-8-a.html
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

How to handle an update of the same record from two different user JSP

how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

I'm not sure whether I understand your question. If one user changes a record then you would like other users to see those changes. Normally those changes will be visible to other users when they refresh their browser, after the first user has committed changes to the record. I you want to be sure that the same row isn't updated at the same time by to different user, you need to configure some locking (pessimistic locking) - this depends of what technology you use. In EJB3 pessimistic locking is performed by adding a version to every entity object. If you are using ADF, the framework is able to handle either pessimistic or even optimistic locking.
If you want the changed row to be updated in other users browsers without any user interaction by these users, you should take a look at Reverse Ajax (ex. DWR http://ajaxian.com/archives/reverse-ajax-with-dwr) - or Ajax in general. But you will never get a realtime solution, where changes is visible in other users browsers right after each record update.

How to handle an update of the same record from two different user in JSP

how to handle an update of the same record from two different user
how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

Usually, if two users try to update the same row at the same time, you want the first to commit to succeed, and when the second commits, they should fail with the error that the row was being concurrently updated. They you may want to show them the new row values and give them the opportunity to merge their values with the new row values...
How can you achieve this? Google optimistic locking.

I'm having the same buffering issues that other users are having when I try to send a short video from my Iphone 4S to my Apple TV. Has anyone heard back from Apple on this bug ?

I'm having the same buffering issues that other users are having when I try to stream a short video from my Iphone 4S to my Apple TV
Has anyone heard back from Apple on this bug ?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

TS4147 I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

You can't; not if the phones are sharing the same iCloud account. If you want to keep your data separate, migrate one of them to a different iCloud account. (You can continue to share the same iTunes ID.)
To do this, go to Settings>iCloud, tap Delete Account (this won't effect the other phone), choose Keep on My iPhone, sign back in with a different Apple ID to set up a new account, turn on your iCloud data syncing, then choose Merge to upload the data to the new account. You can then go to icloud.com from your computer and delete the other person's data from each account.
Another option if you're only concerned about not sharing contacts but wish to share everything else, is to set up a second iCloud account on one of the phones and sync contacts with the secondary account. To do this, go to Settings>iCloud, turn Contacts to Off and choose Keep on My iPhone. Then go to Settings>Mail,Contacts, Calendars>Add Account>iCloud, sign in with a different Apple ID to create the secondary account, and turn Contacts to On. You can then go to icloud.com from your computer and delete the other person's contacts from each account.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How can I remove multiple copies of the same song from the iTunes listing?

How can I remove multiple copies of the same song from the iTunes listing. The program seems to be picking up the same songs from, for example, my user area and my public area in the C drive

As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Can you use home share where there are 2 itunes on the same computer but under different user profiles?

Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

The same filename from a sender to a receiver file adapter - SP14

Hi Expers,
I Have Gone through the link which is given bu Michal.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here My Questions are.........
1.Should we give any file name in the receiver side Adapter in this scenario.?????
2.How wil be the Sender and Receiver Communication channel Parameters????
What Are they???????
Please Clarify me...
Regards
Khanna

Hi Rajesh,
Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
Pls. do the following.
1. In the mapping program that you are using populate the filename coming from the source into the target root element.
2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
Note: You donot need to specify any filename in the receiver communication channel.
To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
You donot need to hard code the value of the filename in the file adapter for your interface.
In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
Thanks
Indranil

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer. If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially. Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time. How do I fix this?

If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

Looping the same answer from the 1st row in the table

I have a database with 3 tables: (1) employeeTable (2) cityTable (3)stateTable.
I reference the employee's city name and state code by each id number from the cityTable and stateTable.
My Employee table has about 10 records, 3 has an idcity and idstate input, the rest are blank.
(1st row) id 9 for Henderson, id 28 for NV (6th row) id 9 for Henderson, id 28 for NV, and (10th row) id 10 for Las Vegas, id 28 for NV
I run a query:
<cfquery datasource="dsnName" name="qEmployees">SELECT * FROM users ORDER BY lastName ASC</cfquery>
<cfquery datasource="dsnName" name="qState">SELECT code FROM states WHERE idstate=#qEmployees.idstate#</cfquery>
<cfquery datasource="dsnName" name="qCity">SELECT name FROM cities WHERE idcities=#qEmployees.idcity#</cfquery>
a run the table output:
<table>
 <cfoutput query="qEmployees">
 <tr>
 <td>#qEmployees.lastName#, #qEmployees.firstName#</td>
 <td>#qCity.name#</td>
 <td width="40">#qState.code#</td>
 <td width="60">#qEmployees.zipCode#</td>
 </tr>
 </cfoutput>
</table>
PROBLEM:
All 10 records output in the table as the same answer from the 1st row (Henderson, NV).
What's making this loop having the same answer from the 1st row and affects all the rows with blank info or different info?
I've been trying to figure this out for weeks and I hope the community can help me out. Thanks!

As Dan rightly says, take a look into table joins; there's no point just giving you the answer as you'll just get stuck next time and these forums are to help people rather than to do their jobs for them.
What you're looking to do is a relatively simple join, so you shouldn't have to read up for long before you've mastered them. Plus your site will be significantly more efficient

Problems importing the same clips from diferents cards IMAC and CS5

Hi, I'm having trouble importing my clips recorded in The ex1, I'm using CS5 with an imac, The problem is that when I import the same clips recorded in two cards, the second card comes exactly with what is inside the first card. It does not have what was originally in it, it just copies what was on the first card or vice versa. But the original folder in my drive is intact with the two cards intact. The problem is when I import it to CS5 on IMAC. When i import the video the imac makes a long file with all the clips an puts them together except the clips from the previous card, it shows but with the same video that is in the begining of the second card or the last clip recorded in the second card .I tried to import the clip again from the first card and it comes with the same video from the second card again.

1) Don't know why this is happening. It may have something to do with
I downloaded from iCloud the same library I was working with
I'm not clear what procedure you're using here. Using a cloud for storage might change some file tags. Generally users I think keep the library on the same drive as the media, keeping the library backups on the system. There is no real benefit in keeping the media in a separate location. Often users will keep the library in the same folder as the media. It makes backing up using tools like Carbon Copy Cloner very efficient.
1a) This can be difficult to find as there sometimes is no obvious indicator. It might be a missing element in a compound clip, a missing or altered layer in a graphics file, a missing font, a missing effect. These will show up inside the item involved, but may not be apparent in the browser. A missing transition for instance will not be seen until you skim over the project or try to export it.
2) The 43 MB is a small amount of optimized media. This never prevents relinking. The library is always looking for original media, or proxy media if you're in proxy playback. It never looks for optimized media. If it has it, it uses it, if it doesn't, it uses the original media. If you are using original/optimized playback, you must have the original files. The optimized files are not enough.

Remove a stopped VM that uses the same vhdx as a production machine.

I have a VM that was created for testing purposes. The C: drive points to the same vhdx that is used by a production VM. I don't need the test VM and want to remove it. I don't want the vhdx deleted when I delete the test VM. How can I safely do this?

Hi rlevick,
Are you managing your VM's with VMM?
If so, I think the safest thing to do is remove the disk from the test VM with Hyper-V manager.
Refresh the test VM in VMM, and check if it shows no disks.. then delete it.
And ofcourse you can turn both VM's off, copy the disk (backup), and delete the test VM.
If the disk get's deleted, put the backup disk back in place.
Good luck

Synchronized my iPhone 3G 8G to copy the contacts and calendars from Outlook, I wonder if I can do the same synchronization to copy the same data from Gmail

Synchronized my iPhone 3G 8G to copy the contacts and calendars from Outlook, I wonder if I can do the same synchronization to copy the same data from Gmail ?

Right, I finally managed to get it sorted out.
iCloud only accept version 3.0 vcards, and the one I was using were version 2.1 so that's why it wasn't picking it up. So the easy way to get that sorted out is, use a gmail account.
I know you don't wanna do it because you think it's too much hassle and stuff, but trust me it only takes 5 minutes and that's it.
1. Create a Gmail Account.
2. Export your Old VCard files to the Gmail Account.
3. Now Import them from Gmail to your PC again.
And, that's it, that's just makes the new imported version in 1 file contains your all contacts in version 3.0. Now you can just upload that on icloud and then sync it with your iphone.
That's what I did and it worked, and I am sure if you wanna replace this file in the Contacts folder under your User Account in Windows and then try to sync Contacts in Tunes, it should work, but as I said, I did it with iCloud and it worked for me. So aye, that's pretty much it. Phewwww..
Been searching for it for the whole day and it took 5 minutes in the end, badass...
Anyway, don't lose hope and always Google for everything!

Mounting the same VHDX from 2 simultaneous user sessions?

Similar Messages

Maybe you are looking for