Mouse acting strange in Console one with Hand Held Snap ins

Has anyone else noticed that Console One acts strange after installing the
Hand Held snap ins?
Thanks,
Cactus

cactus wrote:
> I was able to fix this issue by deleting or renaming one snapin file.
> The file C:\novell\consoleone\1.2\snapins\zen\ZENLicensingS napins.jar
> seems to be causing all this trouble. Restoring the file causes the
> problems again.
>
>
> "cactus" <[email protected]> wrote in message
> news:Z5XRg.500$[email protected]..
>> Has anyone else noticed that Console One acts strange after installing the
>> Hand Held snap ins?
>>
>> Thanks,
>>
>> Cactus
>>
>
>
I had issues with that file as well when I was running ZFD and ZFS 6.5
SP2 with ZFH 7 SP1. See my thread "Bug found with ZFH7 ConsoleOne
plugins." Deleting the license snapin file or updating all components
to 7 SP1 resolves the issues.
Jason Doering
Address is munged; I already get enough spam.
Remove three nospams to reply.

Similar Messages

  • I have a disability and my hand shakes does anyone know of software for a mouse that is good for people with hand tremors?

    I have a disability and my hand is shaky does anyone know of software for a mouse that is good for people with hand tremors?

    You might try contacting the local school district's special needs people - this is something they will be familiar with. Also if you have a local cerebral palsy organization they might be able to point you in the right direction. Assistive software and devices do exist but I am too far out of that loop these days to give any specific help.

  • Mouse acting strange

    If I close the project and open a new one from the File menu than very often my Apple Mighty mouse doesn't act as it supposed to in Logic any more. The "wheel" ( ball ) does not move Logic window up-down and left-right. To get this feature back I always have to restart Logic. This happens also when Logic is running for a while and then I open a project by clicking on icon of a project...
    Finally in Arrange window sometimes track buttons like Mute, Solo (region mute and solo), Record ready are not "clickable". For exanple: I can not make track Record ready with the button visible on each track- have to view channel strip of that track and click on Record button there (under the fader). So I have to restart Logic again... Is that "normal"?

    Thanks for reply. No. I did not add any new device. But I also think that it really is not mighty mouse problem-I checked that at the same time it is not working in Logic it works in other apps like Safari, Preview etc without problem.
    My G5 is acting strange for last 10 days. That's it. I have also big problem with opening Logic-it is very often (90% times) quitting before opening, after 3-5 seconds I doule-click to open a project or Logic app... (I made a separate Topic about it)

  • Integration with hand held devices

    Experts,
    My client is looking for options where the field technicians will be able to get the notifications assigned to them in a hand held device. Can someone share any options you might have considered to enable this? If yes, I will also be keen to know other purposes we can make use of such mobile devices.
    Appreciate your inputs.

    Hi,
    There are plenty of options. The one product mainly useful in EAM is SAP Syclo - now merged with SMP which has ready to use apps for EAM(might need custom development based on how modified ur SAP system is from standard).
    SAP Work Manager(part of Syclo) is a mobile app which works with Service Orders - http://www.sap.com/pc/tech/mobile/software/lob-apps/work-manager-app/index.html
    I'm not sure whether SAP Fiori has apps for this specific scneario but worth checking out.
    Another option would be to go for non-SAP mobile products or developing a mobile solution suited to your business process. But then it all depends upon the requirements and the scenario and how much you are ready to invest.
    Cheers,
    Mahesh

  • SIM user is not able to login with hand held device

    SIM user of particular store is not able to login with handhel device but able to login with terminal.
    Please tell me whether it is configuration issue or data issue.

    You can check whether password is expired or not. Is it same login details used for SIM GUI? If so, are you able to login to GUI.

  • Console One Blues

    Running console one ver 1.3.6 installed from a zen 7 cd. When launching
    console one app., window will not refresh until I move application window or
    click outside of the application window. Then information will populate
    application window. This happens on every click in the application as well.
    I've tried doing a manual uninstall, reinstalling, a different version, all
    with the same results. It's got to be something on my local PC that is
    causing the problem but I'm unable to figure it out. I was thinking maybe a
    different java version possibly. Any ideas? Thanks in advance,
    Tommy

    > Running console one ver 1.3.6 installed from a zen 7 cd. When launching
    > console one app., window will not refresh until I move application
    window or
    > click outside of the application window. Then information will populate
    > application window. This happens on every click in the application as
    well.
    > I've tried doing a manual uninstall, reinstalling, a different version,
    all
    > with the same results. It's got to be something on my local PC that is
    > causing the problem but I'm unable to figure it out. I was thinking
    maybe a
    > different java version possibly. Any ideas? Thanks in advance,
    > Tommy
    >
    >
    According to the ZFD7 documentation ConsoleOne version 1.3.6e or later
    should be used with the ZFD snap-ins.
    Hope this helps.
    Chris

  • Has anyone had a problem with Illustrator lagging behind one letter when you're typing? For example, when I type "apple," the "a" doesn't appear until I type the "p." I only have one window open, and I restarted, but it's still acting strangely.

    For example, when I type "apple," the "a" doesn't appear until I type the "p." I only have one window open, and I restarted, but it's still acting strangely.

    Hi Swampxiix,
    How many programs do you have open while you're working in Illustrator? Do you have a lot of layers or art boards?
    It could be that your computer was being slowed by too many programs, or a complex design file. The age of your computer could also be a culprit.
    If you're on Windows, here are some tricks you can try to speed up your computer:
    Help - 12 Tips to Speed Up Windows 7 Tips, Solutions & How Tos  | PCMag.com
    For Mac:
    Five tips for cleaning and speeding up your Mac - CNET
    Hope this helps!

  • My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

    my macbook pro started acting strange after a safari reset.
    the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
    the mouse also gets 'stuck' in logic precipitating force quits.
    i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
    my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
    pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
    macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
    i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
    what shoud i do?

    You don't say which year you have, however...
    ...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
    Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
    One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
    Good luck,
    Clinton

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • Ipad 3 to my TV with the Apple Digital AV Adapter. The Ipad is acting strange when I connect

    When I connect my Ipad3 to my TV with the Apple Digital AV Adapter the touch screen starts to act strange. The mirroring on the TV looks great, but its impossible to navigate on the Ipad. It keeps opening apps I have not selected and not responding when I try to open and close f.ex. pictures and videos.
    When I disconnect everything is back to normal.
    Any suggestions?
    br
    Bubba

    Thanks for the fast reply
    Already tried that. Didn't help

  • I have files on iomega zip discs from 10 years ago, but no longer have a zip drive.  I can buy one second hand at a reasonable price, but I don't know if it would be compatible with my MacBook pro.

    I have files on iomega zip discs from 10 years ago, but no longer have a zip drive.  I can buy one second hand at a reasonable price, but I don't know if it would be compatible with my MacBook pro.

    Google is wonderful: https://www.google.com/#hl=en&output=search&sclient=psy-ab&q=iomega+zip+drive+ma c+os+x&oq=iomega+zip+drive+mac&aq=1v&aqi=g1g-v3&aql=&gs_l=hp.1.1.0j0i15l3.0l0l1l 1521l0l0l0l0l0l0l0l0ll0l0.frgbld.&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=14 034e73db4ae90b&biw=1626&bih=891

  • Mouse feels strange with mac mini and LG LED TV

    Hi,
    I recently bought a mac mini to use with my LG LED 42LM660T Smart TV. Connected via HDMI.
    I have setup bootcamp with Windows 7 on the other partition.
    The odd thing is that when on the OSX partition, the mouse feels terrible.
    Its almost uncontrollable. Cant get any acuracy.
    I have tried an Apple wireless mouse and a microsoft wired one, installed new drivers etc and still no difference.
    The odd thing is that the mouse feels perfect on the PC partition.
    I looked at a few other forum entries and some people said to change the settings on your tv, like put it into game mode.
    I have tried but there is no difference and anyway, it wouldnt be perfect in the PC partition if this was an issue
    Any help would be useful as without the PC partition this may as well be a brick.
    Thanks
    Tom

    Right click the desktop - show view options
    Icon size and text size can be changed here
    On in a window - go Finder - View - Show View Options

  • What is the music app in the "Together" iPad commercial? The one with four hands (fingers) playing it?

    What is the name of the music app in the "Together" iPad commercial (the one with four hands (fingers) playing it)?

    Thank you!  Gotta wonder why Apple makes it nearly impossible to find Apps that it features in its TV ads. Very annoying. How did you find it? ... and thanks again.

  • Why does selecting a web link open 2 windows, one with the link and the other the home page? This is a single click of the mouse.

    When I single click on a weblink (usually in an email, Firefox starts up and opens two windows; one with the selected web page and one with my home page. If Firefox is running, it opens a new tab which is what normally occurs. It is only when it is not open that I now get the 2 windows. I have an imac running OSX 10.6.3
    == This happened ==
    Every time Firefox opened
    == In the past couple of weeks.

    Hi,
    The rolling over from radius servers only occurs on the same wlan and only when the controller deems the radius server being dead. However, if you get rejected from one WLAN but then you reassociate to another WLAN there is no mechanism in place in rejecting the attempt because they previously failed on a seperate wlan. This happens all the time with users connecting on incorrect wlans.
    The failover feature is for when you have multiple servers (usually for redundancy) on the same WLAN. So when user is rejected but radius server 1 the process stops there and the request isnt sent to radius server 2.
    Hope that helps!
    Tarik Admani
    *Please rate helpful posts*

  • Safari is acting strangely on several counts

    For the last several days, Safari is acting strangely on several counts. I haven't downloaded any updates or plugins recently, and I am not aware of any Safari viruses on Mac OS X, so I'm totally lost here. Please help!
    1. Periodically, Safari will stop loading a page completely. So it will start and then the url bar will be partially blue and the circle will keep circling but nothing will happen. Once it does this on one tab in that window, it will start doing it on all new tabs opened up in that window, but any original tab there might still go through. If I close the window and reopen another window, all sites on all tabs will go right through. I tried disabling DNS prefetching, and that helps Safari behave for a few minutes, then it goes back to such strange behavior. I tested using my wireless and using a different network, and it happens on both, so it's not my router. Sometimes, opening a new window doesn't help. So I shut down Safari and restart. Sometimes that doesn't help either, so I end up having to reset Safari. Obviously, having to reset Safari multiple times a day is neither productive nor ideal.
    2. When it does that url thing, it also seems to become incapable of completing from history or bookmarks. So for example, if I open a tab and type a website name, it won't complete it, even though I have that bookmarked. Generally when that happens on the first tab of a window, I can pull up the site from bookmarks and it will load immediately. But the next tab I open in that window, will do the webpage not loading business I described in #1 above.
    3. A short while ago, i tried resizing a window and it did the strangest thing where it would expand the window space, but just give me a "gray area" rather than expanding the whole web page. I closed the window, opened a new one and resizing worked fine again.
    4. A short while ago, another strange happening: everytime I opened up a new tab in the window and loaded a site, it would merge that tab with my old tab and delete the first tab, so at any given time, it was just a single tab window. I closed the window and reopened, and voila normal tab behavior again.
    Strangely, if I have two windows open - as I often do - only one window will be affected by such strange behavior. The other one will function normally. But such odd behavior is not limited to instances when I have two windows open. It's also happening when there's one window open. For reasons I do not understand, it seems something in the processes of a window gets corrupted after a little while on Safari and that window starts acting strangely.
    Odd and irritating and difficult. I'd greatly appreciate your help!
    I'm using Safari 5.0.6 on OS X 10.5.8... thanks!

    I don't see anything in your post regarding the Safari cache. BTW, a "reset" does not empty the cache.
    From your Safari menu bar click Safari / Empty Cache. Restart your Mac, try Safari.
    If that didn't help, quit Safari if it's open.
    Go to ~/Library/Caches/com.apple.Safari
    Move the Cache.db (or ApplicationCache.db) file from the com.apple.Safari folder to the Trash.
    Try Safari.
    If nothing above helped, make sure there's enough free space on the startup disk.    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
    If nothing above has helped, try Safari in another user account. If you see the same issues there, log back into your admin account.
    Launch Disk Utility. Select the startup disk in the panel on the left then select the First Aid tab.
    Click:   Verify Disk  (not Verify Disk Permissions)
    If the disk needs repairing follow the instructions for Using Disk Utility to verify or repair disks.

Maybe you are looking for