Mouse and keyboard don't respond after a wake up

hi i have a problem with my mac pro under leopard 10.5.5
when my mac is sleeping and i wake up him sometimes the mouse is freeze and the keeboard too
even the caps lock light does not blink
and after 1 or 2 minutes it work again ! i dont understand why
thanks for your help

Flagadajones - I have the same problem. Have you found a solution?

Similar Messages

Thinkpad t42 mouse and keyboard don't work after factory reset

I get to the system preperation tool 2.0 but i cant click or select anything . Same thing happens if i turn the machine on and go into safe mode - the keyboard works to select safe mode but when I get to safe mode they both don't work. they both work if i go into the IBM recovery menu.
Any help would be appreciated
Thanks
DK
Solved!
Go to Solution.

Hi DK,
If you are using the Rescue and Recovery to reload Windows, you should never see the "SysPrep 2.0" appear. Are you using the orignal recovery CDs to reload windows or booting from the F11 partition? To fix this problem, I would simply start the process of reinstalling Windows again.
Go to this website and follow the guide for Using Rescue and Recovery to Recover your OS
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
If you are still seeing the "System Preparation Tool 2.0" after reloading Windows, do the following:
Step 1: Under the "Options" box, make sure the following are checked:
"Don't reset grace period for activation"
"Use Mini-Setup
"Don't regenerate security identifiers"
Step 2: In the drop down menu for "Shutdown mode", change this setting to "Quit"
Step 3: Click the "Reseal" button
This should resolve your issue. Be sure to reload the OS using R&R FIRST before doing the above steps.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Macbook pro mouse and keyboard don't work after installing drivers. Help!

I just installed windows XP SP2 on a macbook pro 2.66 i7 running 10.6.4. I installed the boot camp drivers from my OSX install disk and now neither keyboard, trackpad, nor usb mouse work. Not sure what to do other than delete the partition and start over. Any help is much appreciated!

I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

External mouse and keyboard no longer work after 10.8.5 upgrade

Today I upgraded from OSX 10.8.4 to 10.8.5 on my macbook pro 17". This upgrade caused by external mouse and keyboard to completely stop working. I tried installing the 10.8.5 "combo" install (http://support.apple.com/kb/DL1676) and also tried resetting the PRAM, but neither action had any effect.
I also tried restoring to an older time machine backup with 10.8.4, but could only figure out how to restore files, not the entire system.
I've lost a day of work at this point, I need help... How can I get back to 10.8.4 or get the mouse/keyboard working again on 10.8.5??

Try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?

I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pair.
Any help would be appreciated.

Well, the 'unplugged' reference was noted earlier and I wasn't sure if you'd get a
better response than a standard suggestion to try the other ideas in this link first
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
before actually performing the SMC, that is a dragnet kind of catch-all, sometimes.
All of my keyboard & mouse units are USB and I've gone as far as supplying the
mouse and other peripherals with a powered USB hub; so power from the Mac
isn't spread too thin. The keyboard is one of the only items that should be attached
to the USB port; as it has to work on startup pre-boot keyboard shortcuts... Such
as SafeBoot, PRAM reset, and others where you need a live keyboard and BT
may not be up to the task of being ready. Three going on four of my Macs have
bluetooth capabilities for those items; but I can't justify the continual upkeep cost.
Spare USB keyboards and a few extra mouse are handy as troubleshooting tools, too.
There are some USB keyboard references among search results in this linked page:
https://www.google.com/?gws_rd=ssl#q=Apple+USB+keyboard+troubleshooting
Perhaps the SMC pre-reset suggestions may help resolve the issue, if not, try reset.
Good luck & happy computing!
edited

Please help! my iMac keeps freezing, mouse and keyboard do not work after

Early this morning I turned on my iMac and started downloading updates through software update as usual. I was browsing a website in Safari when all of a sudden the "zoom" feature activated itself and I could not turn it off. I restarted and the keyboard started typing different characters but not letters, so I took out my installation CD and it took me quite a while to reboot the computer using the CD as a startup. Since the keyboard had a different input, the C key was not running the CD. I tried loggin into the support page, but it downloaded the links into the desktop. I used system utilities to restart the computer from the CD, I verified the Disk Permissions, then Repaired the permisions, then the Verify Disk and then the Repair disk, in that order. I restarted the computer and everything seemed fine, but after a couple of minutes the mouse starts closing windows, downloading website links into the desktop and then the keyboard freezes and does not let me type! This has repeated over and over, and I don't know what to do!
Posting this message has been quite an achievement, because I have restarted the computer a lot of times in order to finish.
Someone please help! I don't know what else to do!!!
Thanks!

Yes. And since you aren't backed up, you may have to use Prosoft Data Rescue to try to recovery any information that is critical. First though, do you have another Mac you can hook this one up to using Target Disk Mode?
If you do, that's another way to rescue information. Target Disk Mode is explained here:
http://docs.info.apple.com/article.html?artnum=58583
Similarly, if you have a bootable external hard drive, you can try to boot off that with the Startup manager:
http://docs.info.apple.com/article.html?artnum=106178
To rescue your information. This at least will allow you to do further analysis to see what data corruption might have happened. If the drive is invisible when booted off another, that may indicate a directory issue. But first let's see if we can attach or boot off another and see the internal drive of the machine.

After catalyst 10.10 / xorg 1.9 update, mouse and keyboard don't work

Hi guys,
Yesterday I got the new catalyst update together with the new xorg server, but after rebooting and starting x, I neither could move the mouse nor press short cuts.
I have reinstalled xf86-input-evdev and xorg-input-drivers, but still same issue.
How to fix this?
Edit: Solution: remove [xorg18] repo from /etc/pacman.conf
Thanks
Last edited by scenox (2010-10-26 11:42:09)

Double checking,
are you loading hal at startup (evdev needs it)
yes, see my rc.conf
DAEMONS=(syslog-ng hal cups @network @net-profiles netfs @alsa !slim)
and did you try recreating your config with aticonfig --initial?
yep.... i try
my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen "aticonfig-Screen[0]-0" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "dri"
Load "glx"
Load "GLcore"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

[solved] Xorg 1.8.1 + FGLRX Mouse and keyboard don't work...

Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)

Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)

Mail and iChat don't respond when computer wakes up

Hi everybody,
When I first boot up my computer, mail.app and iChat both work fine, but when I put it to sleep, and then wake it up, neither application responds. I just get the little spinning rainbow. When I force quit, and reopen, I have the same problem. When I reboot, they're both fine again.
I've tried deleting the preference files for both applications, with no luck.
Thanks

OK Jeremy, this may help or may not, but it will do no harm.
Power down both DSL and Airport, and your Mac (or at least log out).
Wait about one minute, power up DSL, let it pass some configuration routine (may take another minute or so), power up Airport, wait another minute and fire up the old Mac.
Open chat and mail, put it to sleep and wake it up again.
Did this improve things?

T400 - frozen mouse and keyboard after waking from standby

I'm experiencing a very annoying problem on my T400 with Win XP Professional SP3: around 75% of the time, when I wake up my T400 from standby mode, the mouse and keyboard don't work. Actually what happens is one of these situations:
1) Neither keyboard nor mouse (stick and pad) respond - Ctrl-Alt-Del to enter username/password is not registered, I can't log into Windows
2) Keyboard works (I can log into windows) but mouse doesn't respond
I have to close the laptop to standby and re-open, repeatedly, until it finally works. Though one interesting aspect is that if I have external USB keyboard and mouse plugged in, they always work.
Anyone have any ideas? Thank you in advance!

Hello jsolomin and welcome to community,
Kindly update the BIOS and then check if the issue gets resolved.
BIOS Update (Bootable CD)
BIOS update utility for Windows 32-bit
BIOS update utility for Windows 64-bit
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problem with xfce and/or mouse and keyboard

Hi!
Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
It's happening when I start xfce both from user and super user.
Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
Thanks,
Gaba

Sorry for not replying, but I didn't have access to my laptop by this time.
On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
http://codepad.org/8pYIj8qC
I see that something is wrong, but after some attempts I don't know how to fix this ^^
Edit:
Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
Last edited by gargoyle (2015-03-15 23:20:18)

USB mouse and keyboard not working

Any advice/thoughts/suggestions appreciated:
All 3 USB ports at the back of my iMac have stopped working. This means I can't use either a keyboard or mouse, so have no way of logging in. I turn my iMac on, it boots up as usual, but when it gets to the login screen, the mouse and keyboard don't work and I get a message about bluetooth set-up. (Both my mouse and keyboard are wired, not bluetooth).
I have tried an SMC reset (by turning the iMac off, unplugging all USB devices and the power cable, leaving the iMac for a few minutes and then plugging the cable back in a turning it on again). This didn't work.
I've also tried a different version of the SMC reset where I hold down the power button whilst all the cables are unplugged and also as I plug the power cable back in. After doing this, the fan turns on at full speed (v loud), but the mouse and keyboard still don't work.
I've also checked my mouse on a different computer and it works fine.
Has anyone got any other suggestions / workarounds?
Note I can't do a PRAM reset because my keyboard doesn't work.
Is it probably that the USB hardwear has failed? If so, is it possible to repair this? It is worth repairing given it is a 5/6 year old iMac (the white plastic one) which is probably on its last legs anyway?
many thanks!
Jez.

Try the SMC reset again, only this time wait 5 minutes in set 3 instead of fifteen seconds.
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. 5 minutes.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.

Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.

Hi,
Welcome to the  Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Mouse and keyboard don't respond after a wake up

Similar Messages

Maybe you are looking for