Mouse and keyboard giving erratic results

Text tool switching to pointer too. Sometimes I can't type a letter at all. Up and down arrow tools not always working.

Hi RedTower,
If you're having issues with your keyboard and mouse, you may find the following article helpful:
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Regards,
- Brenden

Similar Messages

Problem with xfce and/or mouse and keyboard

Hi!
Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
It's happening when I start xfce both from user and super user.
Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
Thanks,
Gaba

Sorry for not replying, but I didn't have access to my laptop by this time.
On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
http://codepad.org/8pYIj8qC
I see that something is wrong, but after some attempts I don't know how to fix this ^^
Edit:
Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
Last edited by gargoyle (2015-03-15 23:20:18)

Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?

I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pair.
Any help would be appreciated.

Well, the 'unplugged' reference was noted earlier and I wasn't sure if you'd get a
better response than a standard suggestion to try the other ideas in this link first
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
before actually performing the SMC, that is a dragnet kind of catch-all, sometimes.
All of my keyboard & mouse units are USB and I've gone as far as supplying the
mouse and other peripherals with a powered USB hub; so power from the Mac
isn't spread too thin. The keyboard is one of the only items that should be attached
to the USB port; as it has to work on startup pre-boot keyboard shortcuts... Such
as SafeBoot, PRAM reset, and others where you need a live keyboard and BT
may not be up to the task of being ready. Three going on four of my Macs have
bluetooth capabilities for those items; but I can't justify the continual upkeep cost.
Spare USB keyboards and a few extra mouse are handy as troubleshooting tools, too.
There are some USB keyboard references among search results in this linked page:
https://www.google.com/?gws_rd=ssl#q=Apple+USB+keyboard+troubleshooting
Perhaps the SMC pre-reset suggestions may help resolve the issue, if not, try reset.
Good luck & happy computing!
edited

How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

Hi, I have a question for u guys who can solve this.
I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
So back to my question.
So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
Dose anyone knows how to fix this freezing thing?
My computer is:
27' iMac late 2013 (bought it just few days ago)
I did no upgrades when I bought it, except the graphic card.
I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
Please leave a comment when u think u can solve my problem.

See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
Good luck,
Clinton

UN-pairing wireless mouse and keyboard ?

I have a new(ish) 27" iMac, OS X 10.6.3 [ with two-tone display ...but that's another story ]
I set it up with the wireless mouse and wireless keyboard that came with it.
The instructions were pretty clear how to "pair" the mouse and keyboard.
So I paired them both up and got started with my new iMac.
But I really didn't like either one (to each his own).
Tried my best but just never warmed up to them.
So, I have just gotten me new, third party, wired mouse and wired keyboard.
Question: am I supposed to formally UN-pair the mouse and keyboard?
Seems like you ought to.
Tell the iMac to quit looking for them?
There's an on/off switch on the mouse.
I can just turn it off.
But do I UN-pair it first.
Or anything?
And...there's what the manual says is an on/off switch on the keyboard.
But it seems to be an "on/on" switch.
Maybe this is a "small deal".
Or maybe it is a "no deal at all".
But I find that some times it DOES make a difference whether you do something just the right way or not.
So, just trying to find out.
Thanks,
James

David,
I have also invoked the wrath of someone that I was assisting with an issue who accused me "assuming" that they were a beginner and of talking down to them. It is often a thankless position.
I was mainly poking fun at myself for being so basic in my understanding of some of this stuff.
But I understand exactly what you're saying.
Hard to know isn't it?
I believe that if you highlight each device separately in the list, that you can then select the - symbol next to the cogwheel and delete the device altogether from your iMac.
Well, I WAS highlighting each device separately, but all the "cogwheel" was giving me was the "disconnect" option.
Then I wondered, hmmm... what's these little "+" and "-" symbols next to the cogwheel mean?
BAM! yep, the minus sign removes them from the computer completely.
..which, if I'm not going to be using them again was what seemed TO ME the thing to do.
Thanks for your help!
James
P.S. And I just now noticed, someone deemed my passing comment in my OP about my display to be politically incorrect. Didn't realize it would have been a big deal. Oh well, live and learn.

Windows 10 install (64 bit). Mouse and keyboard do not work, can't click through setup configuration.

I've tried with both upgrade and iso installation (starting from Windows 7), but for some reason, after setup is finished and I get into the configuration area (IE, accepting license agreements or choosing network or choosing express setup), I do not have
a mouse and keyboard to do anything with. The keyboard and mouse are powered, but aren't giving input. For example, toggling cap's lock does not show up on the keyboard's lights.
Keyboard is Razer Black Widow, mouse is Gigabyte M8000X. I also tried with a Microsoft wireless mouse/keyboard pair with the Razer unplugged during setup (Reason being, a separate razer setup window would appear during the 'configuring devices' stage).
I am able to install to virtual box, but I've only tried the 32 bit installer. I have not yet tried the 32 bit installer on the actual machine, and I have not yet tried booting to the CD.

Review these,
http://www.tenforums.com/tutorials/1950-windows-10-technical-preview-clean-install.html
http://www.tenforums.com/tutorials/2108-windows-10-dual-boot-windows-7-windows-8-a.html
http://www.tenforums.com/tutorials/2087-hyper-v-virtualization-setup-use-windows-10-a.html

Why is my mouse and keyboard freezing up?

Imac G5 with OSX 10.5.8, and imac G5.2 with 10.6.8
The same problem after transfering my folders from the G5 to the G5.2
I have to keep unpluging the keyboard and pluging it back in again, to free the mouse or keyboard.
I've changed both the mouse and keyboards.
I've done the both the SMC and PRAM resets, permissions fix, and virus searches.
No results.
This is a long discussed problem, has anybody found a fix?
Please lemme know.
Thanks

Pedestrian1980,
Hate to say it but you are either posting on the wrong forum or don't know which Mac you own. This is a Intel based iMac forum, as all G5 iMacs were PPC based that would indicated you are on the wrong forum. If you have an Intel based iMac (click About this Mac and check for the microprocessor) then you are on the correct forum.
You did not indicated if the keyboard or mouse are wired or wireless and if they are Apple or not. However, after determining if you have an Intel based iMac then redo the SMC and PRAM resets at least 3X each back to back and then retest. To be sure you are doing each reset correctly please click
https://discussions.apple.com/docs/DOC-3603
for directions.

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Will my wireless mouse and keyboard(pc...Logitech) work with my MacBook Pro

I'm wondering weather or not my pc mouse and keyboard( wireless....Logitech) will work happily with my new MacBook ? Never had a mac before so this may be the first if many dumb questions

They will ... I know from experience.
But also be warned that those devices operate at 2.4 GHz usually, and will fight a 2.4 GHz wirless network signal. Sometinhg will lose and will behave erratically.
Having a 5 GHz network available is a very good idea.

P45-C51 mobo. Mouse and Keyboard freezes frequently. Please Help !!!

Hi everyone. I just bought P45-C51 mobo a week ago. It was working fine then since yesterday and then frequently today I'm facing a real problem. I'm using Windows 7 Ultimate 64bit. Whenever I start my computer and it reaches the desktop, after a couple of minutes the mouse and keyboard stops responding but the windows is not hanged as I can simply press the power button and it normally shuts down within 5 to 10 seconds. I checked it both with USB and PS2 version of the keyboard but both seems to freeze. I first thought it was something in windows but i think its something from the bios because when i turned my pc ON and went to the bios then there after 5 minutes the keyboard was frozen but the bios was normal as i could see the seconds change on the system information screen. Can anyone please point me in the right direction what could be the cause of this problem. All the specs are as follows.
Mobo: MSI P45-C51 (MS-7519)
Processor: Core 2 Quad Q8400
RAM: Corsair Vengeance 8gb kit 1600Mhz (4x2)
GPU: EVGA GeForce GT 240 DDR3 1GB
PSU: Cooler Master Extreme Power 460 Watt
Casing: Cooler Master Elite 334 Nvidia Edition
HD Primary: WD2500AAKX 250GB
HD Storage: WD10EARS 1TB
Bios Version: 5.7
Cooler: So far none. I'm on air cooling. One CPU fan and two chassis fans.
Temps for CPU are under 40 degrees.
Please help anyone...

Quote from: Bernhard on 21-September-11, 23:46:23
Inspect all your USB ports carefully for any visible damage inside the ports itself. Test if a USB device can be inserted smoothly into each one.
As a last resort, remove the MB and test on a non-conducting surface, and remember an anti static bag is not a non-conducting surface.
Have you started your system in safe mode to test the ports ?
Hi Bernhard, Sorry for the late response. This problem was something related to that board physically as I searched and dig inside the motherboard basics in deep I found out that the ICH10 Usb Host Controller was giving me problems or their might actually be some problem with the South Bridge because thats what controls the low power accessories like usb, IDE sata etc... and thats why the keyboard and mouse was hanging. There were some more issue too with that board like Slow boot and resuming from hibernate took about 3 minutes and when I press the power button for the cold power on it usually power on after 3 seconds and some times it happened if i properly shutdown and then again power on it won't turn on (LEDs and fans start but no power on to the system) So i would have to switch off the power supply, disconnect the power cord and then wait 5 minutes and then reconnect and it turn on then.
What i did was go to the shop from where I bought the mobo and told him all the problems and replaced my board with a new one because it was in warranty and bought only eleven days before.
Thanks alot Bernhard for so much your time you spent on helping me on this issue. The new board seems to work great and I can see very significant different in performance and speed.
Two last queries I have if you can help me out. Can you tell me If i can use Cooler Master Hyper n520 Cooler on this board. I have CM Elite 334 Nvidia Edition Casing. And second thing is that the bios of this board 5.1 and the latest is 5.7. Should I care updating the bios version? If yes then do you suggest any hints on how to do this ?
I really appreciate your help you have done so far.

USB mouse and keyboard not working

Any advice/thoughts/suggestions appreciated:
All 3 USB ports at the back of my iMac have stopped working. This means I can't use either a keyboard or mouse, so have no way of logging in. I turn my iMac on, it boots up as usual, but when it gets to the login screen, the mouse and keyboard don't work and I get a message about bluetooth set-up. (Both my mouse and keyboard are wired, not bluetooth).
I have tried an SMC reset (by turning the iMac off, unplugging all USB devices and the power cable, leaving the iMac for a few minutes and then plugging the cable back in a turning it on again). This didn't work.
I've also tried a different version of the SMC reset where I hold down the power button whilst all the cables are unplugged and also as I plug the power cable back in. After doing this, the fan turns on at full speed (v loud), but the mouse and keyboard still don't work.
I've also checked my mouse on a different computer and it works fine.
Has anyone got any other suggestions / workarounds?
Note I can't do a PRAM reset because my keyboard doesn't work.
Is it probably that the USB hardwear has failed? If so, is it possible to repair this? It is worth repairing given it is a 5/6 year old iMac (the white plastic one) which is probably on its last legs anyway?
many thanks!
Jez.

Try the SMC reset again, only this time wait 5 minutes in set 3 instead of fifteen seconds.
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. 5 minutes.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

Try resetting the SMC (no peripherals required).
Barry

External mouse and keyboard no longer work after 10.8.5 upgrade

Today I upgraded from OSX 10.8.4 to 10.8.5 on my macbook pro 17". This upgrade caused by external mouse and keyboard to completely stop working. I tried installing the 10.8.5 "combo" install (http://support.apple.com/kb/DL1676) and also tried resetting the PRAM, but neither action had any effect.
I also tried restoring to an older time machine backup with 10.8.4, but could only figure out how to restore files, not the entire system.
I've lost a day of work at this point, I need help... How can I get back to 10.8.4 or get the mouse/keyboard working again on 10.8.5??

Try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

[solved] mouse and keyboard not working (and previous fix wont work)

i made a clean default setup with
arch
latest kernel - 2.6.29 i think
xorg 1.6.1
video-intel-legacy
on a 865G intel box + tried usb and ps2 keyboards + usb mouse
when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
- without xorg.conf
- with auto-generated xorg.conf (X -confogure)
- with the automatic conf +
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with tiny xorg.conf containing only
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with dbus/hal enabled and disabled in rc.conf
how i make it work
Last edited by ash (2009-04-30 19:01:41)

the setup that works to me now is
automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
dbus and hal enabled in deamons
this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
Last edited by ash (2009-04-30 18:26:16)

Mouse and keyboard giving erratic results

Similar Messages

Maybe you are looking for