Mouse and keyboard problem after updating to Mountain Lion

Hi!
This is the strangest problem I got on a Mac for 20 years...
I work on a Macpro 3,1. I upgraded my 10.7.5 os to 10.8.5 (needed it to use GTX 680 card).
The upgrade went fine and then... The mouse and the keyboard don't react.
After resetting the SMC they began to react but the mouse is deadly erratic and the keyboard repeats few time each key (impossible to write), for instance I hit n and got nnnnnn.
Resetting PRam does not help. Redoing the os update did not help.
This is really bad cause I can't use my Mac at all right now. I think I'll do a Fresh lion install and move my data back to it before I find something for that Mountain.
Its a real pain, does someone have an idea?
Thank you,
Milosz

Hi!
For those interested, I found the solution reading others forums.
Here it is:
I had to remove my optional old apple airport card (atheros a/b/g) and everything works fine now.
Hopefully I don't wifi on that Mac, otherwise I would need to buy another one. Which one? I don't know.
Too bad Mountain Lion isn't supporting anymore that apple card…
Have a nice day

Similar Messages

Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

Hi !
I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
Anybody got a solution to this other than using the iMac for offline use only ?

Hi !
I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
Thanks for pointing me to the right direction !

How do I fix missing and corrupted images after update to Mountain Lion 10.8.2 and Aperture 3.4?

Last night I tried to update to Aperture 3.4 on my MacBook Pro (late 2007 / 3,1 model) and received a message that I needed to install Mountain Lion 10.8.2 first. However, there was no update in my App Store account for 10.8.2. The update for 10.8.2 appeared above the Aperture 3.4 update after I restarted the laptop and rechecked for updates. I proceeded to update Mountain Lion and then Aperture. Everything seemed to be working fine so I opened Aperture 3.4 and watched it update the database without any issues...
Upon examining the small library (of approximately 1200 images totaling about 8 GB) that I leave on this MacBook Pro specifically for testing Aperture updates, I observed the following:
I know anything can happen with stored images, so I try to create redundancy by duplicating important photos on import to an external device, running Time Machine backups and keeping memory cards stored away until I am comfortable with the integrity of the first 2 methods. I am not really worried about this specific Aperture Library on this laptop because it has become my "laboratory" for testing new updates before we apply them to our other computers.
In general, I try not to be too early of an adopter when it comes to software and updates--even though I have had remarkably few problems with Apple updates in the past. However, my success rate with Apple's products and "feature curiosity" occasionally leads me to update early! It is my curiosity that, again, has me wondering: What went wrong and how can I fix this in case it happens to something important in the future?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

Java problem after updating to mountain lion 10.8.2

I have a macbook pro
the java was working perfectly on mountain lion 10.8.1, but when I update to 10.8.2 it stoped working and just keep loading and the borwser just stuck either using safari or firefox. ( screen shots attached )
I will wait for any suggested soulution, so far I tried many. otherwise I will just install the 10.8.1 version again and will see if the problem solved

sorry ... the problem solve, it seems that I had a problem with my router.

Problem after update to Mountain Lion with QuickTime

Hello! I have a Macbook Pro early 2011. After updating to ML i have a problem with QuickTime player 10.2. I cant open any video with this player. For example i also have flip4mac + perian and i cant play an avi file. Specifically, i can open but it doesent play. I click to play button, but nothing works... I can see image but doesnt play normally.
But the most strange is, that i cand open also a .mov (quicktime file).. I export a video from my Aperture Library, and when i press play, the video plays ,but i cant see anything... only black screen. The video plays normally within aperture app..
Quicktime player 7 is ok... but QuickTime player 10.2 doesnt work.. why?

Is the time capsule the only router in the network?
Try setting the lease time in the TC to very short value.. 20min or even less, 10min. It will not add signficant network traffic but might keep the Air updated to the TC.
I would also use SMB compatible name for the TC as well as wireless.. ie short, no spaces.. pure alphanumeric.
Set a different name for 5ghz so it cannot swap around.
And lock the wireless channels. Try each channel in turn, to see if any are better.

App Store and Mail crash after update to Mountain Lion

I installed Mountain Lion on an empty partition on my HD and then used Migration Assistant to bring over my user account.
I can boot into ML but the App Store and Mail crash when launched.
Has anyone else seen this, or better yet, have a solution?
Thanks,
Richard

I have noticed the same thing on my MAC. Mail has become very "clunky"- Before Mountain Lion, whenever I clicked on a msg or a function (delete), it would respond immediately. With Mountain Lion there is an unacceptable hesitation. What is going on with this latest update?

IWork and iPhoto problems after upgrading to Mountain Lion.

Since I have upgraded to OS 10.8.2 (Mountain Lion), iWork would not load and I can't export pictures from iPhoto. I am using a MacBook Pro 17", early 2008, with 1 Tb hard drive and 4 Gb RAM. Any help will be appreciated. Thanks.

Hi !
I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
Thanks for pointing me to the right direction !

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

After updating to mountain lion, icloud password has not been accepted by system preferences

After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?

I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

After updating to mountain lion, my Safari e-mail thru AT

After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.

Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1   com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2   com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???

Mouse and keyboard problem after updating to Mountain Lion

Similar Messages

Maybe you are looking for