Mouse and track pad not responding

intermitently the mouse and track pad arent working. I can move the cursor put no left or right function. I have to restart computer to get them working again.

well, it is not over yet
the bluetooth keeps disconnecting the magic mouse
Any advice?

Similar Messages

  • Mouse and touch pad not responding/working?

    the entire touch pad doesnt work when using the computer. also when a mouse is plugged in that doesnt work either!...... but both work fine when in the lenovo help section, (when pressing the lenovo help button) they only dont work from the login section and when logged in.
    HELP!!!

    I am facing similar problem. However it is little different. My touch pad stopped working just within 3 months after buying this product. Now the problem is no body is taking responsibility of this kind of problems customers are facing. Here the real problem is my blue light at the touch pad has also stopped working.
    I believe it means, it must have some hardware problem. Now it is almost more than 8 months to this product and am still struggling with this problem. The only good part of it is, here my usb mouse is still working.
    One more thing i would like to know here, how can i find lenovo help key you mentioned in your querry? Please guide someone to get rid of this problem.

  • Recently updated iMac and macbook pro to mountain lion.   Now mouse and track pad operate backwards i.e.  scroll up and page scrolls down. how do you fix this?

    recently updated iMac and macbook pro to mountain lion.   Now mouse and track pad operate backwards i.e.  scroll up and page scrolls down. how do you fix this?

    System Preferences > Mouse -- deselect "Scroll direction: natural." Do the same for the trackpad > Scroll & Zoom preference.

  • Mac Book Pro Keyboard, Track pad not responding at login page

    URGENT! URGENT! I´m currently in the middle of the amazon shooting a documentary and my Macbook Pro boots up to the login page but I cannot nothing appears on the login line when I type, and my track pad in not responding. Keyboard and track pad dead. However, I can hit the control-apple-power button and get the shutdown-restart-sleep sceen. I plugged in my usb mouse and that works--track pad does not.
    I have rebooted, with power supply, without power supply; removed-replaced battery; still the same problem, boot to login screen--now keyboard, not track pad.
    Any suggestions?

    I also have this problem. After closing my MBP to put it into sleep mode, I opened it a few hours later to resume work and the machine was locked up. I shut the machine down by holding the power key for 5 seconds. Now, every time I try to restart, the login screen appears (after a very long boot time) but the trackpad and keyboard do not respond.
    My summer internship final project is due in 3 days and I am desperate. Please help!

  • MBP keyboard and track pad not working

    Today the keyboard and track pad on our mac book pro laptop just stopped working. The mouse connected to it by usb continued to work but we can't type or anything. We tried the ^F6 keyboard shortcut but it did nothing since of course the keyboard isnt working. And it is also not the number lock key. The computer was working fine all day up until now. It is just under a year old. Any ideas?

    I'm having the same problem. It appeared yesterday and then magically "repaired" itself. My MBP was fine today. Tonight the problem is back. No response from the keyboard and track pad. Track pad works fine using a USB mouse. My problem appears at start up. The cursor is in the usual upper left hand corner. It can't be moved. Restart, sleep then restart do not solve the problem.
    Suggestions?

  • Key board and track pad not working

    Ok, My situation is similar to some of the other things posted but not quite.
    I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
    When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
    I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
    My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

    Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
    http://support.apple.com/kb/HT1661
    Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
    Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
    I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
    It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
    I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
    Good luck!

  • IMac powers up fine.  Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

    My iMac was off during a recent thunderstorm. When I power up the computer all is fine.  However the wireless keyboard and track pad are not recognized by the computer.  Their power lights blink twice, go off, then blink again. Any suggestions?

    Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

  • Magic Mouse and Track Pad won't scroll after after waking

    I installed Lion and a TrackPad on my 27" iMac at the same time. When I wake my Mac up after sleeping for a period of time, the scrolling does not work on either the TrackPad or the Magic Mouse. The pointer works fine on both, however. I have to restart in order for things to work again as they should.
    Apple Care has so far been unable to help. Has anybody else experienced this? I'm ready to return the track pad and/or uninstall Lion. This is turning into a Windows experience. Not typical for Apple.

    Agreed. My bluetooth keyboard works fine with iMac and Lion. Not so for my magic mouse. It will work for a while and then clicking and scrolling become unresponsive. Sometimes a complete shutdown and start up will solve the problem for a little while (not always), but then mouse becomes unresponsive again.
    Speaking of unresponsive, that is Apple on this subject. Many, many complaints, but no action.
    I'm using a 2010 iMac, all updates are installed. Batteries are charged. Reset PRAM. Checked settings in System Preferences. Did everything others have suggested. No help.
    The magic mouse was fine with Leopard. It was even fine with Lion, until the Lion update and then the problems began.
    I'm back to using my USB mouse. I'll see if Apple Store will accept return of magic mouse. Doubt it.

  • Track pad not responding to finger click

    I recently got a Macbook Air and tried using the track pad for the standard finger click options however it doesn't work/respond.
    Viewed the "how to demo" fromt eh track pad options, tried those and it is still not reponding.
    I used to have an old Macbook in which i enabled the finger click and worked fine.
    Is there a set up that I don't know about?
    Thanks for your help in advance.

    What OS are you using. Your profile shows IOS 5 but that is for an iPhone or iPad.

  • Track pad not responding correctly, what to do?

    The track pad is not responding as it should, arrow moves on its own at times and when clicked it does not respond or click where it should. Have tried restarting it and it will work fine for a min or so then go back to being inaccurate.

    What OS are you using. Your profile shows IOS 5 but that is for an iPhone or iPad.

  • Spotlight starts indexing after every restart and there is a scrolling delay with both mouse and track pad.

    I had to restart my MBP three time, two after it crashed. Every time Spotlight starts to index the content on my Mac
    which takes two hour. Then there is a delay when I start scrolling, both with the mouse and with the track pad.
    I also notised that after changing the icons with Candybar they still appear unchanged in Launchpad, which makes
    it confusing. Launchpad isn't consitent when putting the apps in aphabetic order, but jumble up some of the apps.
    i don't get back the wab sites after restart as i was to believe I would.
    As Jobs sez; And more thing.
    Well one more might OK, there are more bugs then that, but I to tired to tell them all.
    I have never found so many bug in such a short time (only in two hours with Lion now) with any other OS and I have worked with Macs since -91.
    God help us.

    Hi, me again, more data.
    I have found that some plugins are accessing the internet without my permission.
    And when I went into the plug in menu via the addons options through the Tool Menu option, I found the plug ins there.
    BUT I never installed those plugins, and now they are there and they are accessing the Internet. Here are two images to show the plug ins disabled and yet another image showing them still accessing the Internet even when disabled.
    I then removed them from the system (I did back them up first, just in case).

  • Eratic pointer and track pad not not working properly

    my pointer is eratic, deleting words as I type and moving around on its on opening items while trying to type. The track pad doesn't even seem to be working

    Sometimes a very thorough cleaning of the trackpad restores its functionality. 
    I have no idea what you mean by the screen jumping around.  More details would be helpful.
    Ciao.

  • Mac Book Pro - Mouse and Track Pad Freeze

    I left my mac book pro asleep for a few hours, everything had been working fine. When I returned it would not wake up so I restarted it.
    It makes the chime and comes to the password page as per normal. Then I cannot move the mouse and the keyboard does not work. Also impossible to select Caps lock (light does not come on)
    Things I have tried:
    PRAM
    Safe Start Up Mode
    Attaching external keyboard and mouse
    Restarting holding down ctrl, apple and power key
    No luck with any of the above.
    Any ideas.
    Thanks in advance!

    It's not completely clear if you are using an external USB mouse. Some people use the term "mouse" for the clicker bar so I want to make sure I understand how you are set up instead of guessing.
    If you are not using an external mouse, remove the battery and inspect it for bulging or other deformation. That can put upward pressure on the underside of the trackpad assembly and take it down, often taking the built-in keyboard with it.

  • My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

    My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
    Please can you help with this.
    It has only just happened in the last few days.
    Many thanks

    You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
    For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
    (Until your issue's resolved, you can Control-Left Click to get the right click functionality).

  • Keyboard, Trackpad, Mouse and USB ports - Not Responding

    Hello,
    Here is my problem. Today when I started my MBP, there was no keyboard, no mouse(USB), no trackpad, no USB ports. I restarted it several times, but nothing changes. If not everything looks fine My desktop is availble, also the backlight on the keyboard works fine, but I can do nothing, my MBP is unusable. Only the power button works fine. I tried to connect an external USB keybord without success, the same with usb drives. I'm running 10.5.6 on MBP, Core Duo 1.83 GHz, 2 GB RAM.
    I found many discussions here about the same problem( http://discussions.apple.com/thread.jspa?threadID=1568210&tstart=0 ), I tried a restart without battery etc.... Nothing helps.
    Please help, my warranty passed away
    Message was edited by: gvassilev

    As this is literally a brand new imac, I would hope that the ports aren't giving up as I am sure they are very expensive to replace.
    If it is that new you should be under applecare so you could take it your nearest apple store and let them deal with it (or call apple first if you want).
    Besides the keyboard do you have anything else connected to the usb ports that may be drawing off too much usb power? In which case you may need a powered usb hub.

Maybe you are looking for

  • Issue in registering ABAP stack into SLD

    Hi all The issue is as shown below. I appreciate your help. Environment: SLD host-Windows Server 2003, Oracle 10g, WAS JAVA 640 SP19 CRM ABAP+JAVA 640 host - unix, Oracle I was able to register CRM JAVA stack in SLD from Visual Administrator>SLD Data

  • Cannot switch to 90 minute mode in idvd 3.0.1 running 10.4.6 and QT 7.0.4

    Hello, I have a dvd project that has more than 60 minutes of video in it, and iDVD wants to switch to 90 minute mode, but when I click on the 90 minute button or 60 minute button when the window pops up, nothing happens, and I have to end up killing

  • Problems with OMBCOPY MAPPING

    I'm trying to copy MAPPING in OMB+ When I'm in destination project i write: OMBCOPY MAPPING '/SOURCE_PROJECT/MODUL/MAP_NAME' TO '/DESTINATION_PROJECT/MODUL/' USE REPLACE_MODE and i get the following message: OMB01065: Object type MAPPING is not valid

  • My Ipod crashed and I can't restore it.

    When I try and restore it, it says I need to update my firmware but when I go to install the firmware it extracts but then I get an error message. It won't let me update to 5.0 or any earlier firmware. Help!!

  • HT201250 Need to free up space!

    I have an external drive, it's hooked up and everything. Can I now delete files taking up massive amounts of space and get them back later down the line? The reason for this is that my drive is taken up by 105 GB of "other" and I cannot identify what