Mouse click adding character to password

I am working on my parents IMAC G5 with OS X 10.4.11. The problem is when I click Apply to save the PPPoE settings, it adds an extra character to the password. This under the network setup under System Preferences.
I can't use the key board to tab through and hit enter to apply either.
I wind up having to not save the password, and then go through a whole series of diagnostics to sign on through Safari.
Why is it adding a character when the mouse is clicked on apply? It does this with USB mouse or with a wireless mouse. I all ready tried to turn off the blue tooth, too. I'm stumped, please help.
Thanks Much, Inkudu

Thank you for the warm welcome.
I'm pretty sure it's adding or changing a character. It doesn't do what I described when I tell it to not remember my password and sign in maually.
It only rejects my password through system preferences.
I'll try the key chain. I also didn't know about the adding dots to make the password look longer. Are there any known issues where that interfers with passwords?
Thanks Much, Inkudu

Similar Messages

  • Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

    Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
    To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad.  Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
    i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
    Thanks.

    It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
    Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
    Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
    Tom

  • I went to import special characters in imovie '11 and now the character window comes up on every application, yet won't open in iMovie at all, it flashes across every screen on each key/mouse click

    I went to import special characters in imovie '11 and now the character window comes up on every application, yet won't open in iMovie at all, it flashes across every screen on each key/mouse click, stops the other software from running, and won't shut off, ever.

    Try trashing the .plist in Home/Library/Preferences which has CharacterPalette in its name.

  • Adding mouse click effect

    Hello,
    I am trying to create a whirpool like wave effect on a image
    with a mouse click.
    This following url is what I am trying to achieve with
    captivate.
    http://www.gautamsaha.com/bigsky/assessment.swf
    The was created using the hotspot quiz type feature of
    "articulate"
    When you click on any part of the map with mouse, a nice
    wavelike ripple shows.
    When you click again on another part of the map, the same
    feature shows.
    I have tried hard...but I cant seem to figure out how to do
    this with Captivate.
    Can anyone help?

    Hi again gotham1
    When I say "create a widget", I'm referring to what I've seen
    my fellow Adobe Community Expert Paul Dewhurst do. You can check
    his stuff out by
    clicking here.
    Your statement regarding adding this to the gallery somewhat
    confuses me, as almost any object you add appears in the gallery.
    Further I'm confused with the comment regarding there being nothing
    in Captivate to enable interaction with Flash things. I'm really
    hopeful that you will check out Paul's stuff, as he has done many
    such things.
    I think your approach is what Paul uses. That is, dropping
    the Flash created .SWF onto a Captivate slide as an animation.
    Cheers... Rick

  • Problems using right-mouse click functionality in a Captivate added to Articulate?

    Has anyone experienced any problems using the right-mouse click functionality? It's working fine when I preview the project, or view the published Captivate SWF or HTML file, but it's not working when I insert the published Flash file into Articulate and then try it in the published Articulate. I'm using AS2 and Flash Player v10. When I try to right-click it's bringing up the Flash Settings menu you can click on. I've been into my Flash Manager and told it to always allow content from the folder my Articulate is in but that hasn't made any difference. I'm viewing the Articulate on my C drive and I have read that that can cause problems - does anyone have any ideas? If I left-click it recognises it as a click but doesn't recognise it as the correct click action, so just keeps on bringing up my failure caption and won't allow me to progress.
    Thank you!

    Hello,
    The right-click functionality in Captivate is 'in' the JS-file, that is called by the HTML-file that will open the SWF. But if you insert the SWF-file in Presenter (Articulate or Adobe) the right-click functionality will not be there, because you are not using the JS-file. BTW: this was also explained in the thread where you posted this same question before. Please, do not post the same question in 2 different threads
    Lilybiri

  • How do I set my project to advance to next slide on mouse click vs just play?

    Captivate 6 on mac running OS 10.7.5 file format in question .htm (firefox)
    I'm brand new to Captivate 6 (never used it before) I have put together a mock presentation from scratch which has a few introductory slides then a quiz. When I publish it there is a "play" button which is NOT the behavior I want.
    I watched a training video from Lynda.com and the insstructor imported a PPT file, there was a dialog box which asked the how to advance slide, there was a drop down menu and one of two options was advance "on mouse click". This is the behavior I'm looking for.
    I've scoured the internet and forums etc to find a comparable option elsewhere in Captivate 6 when creating from scratch vs importing from PPT and cannot find one anywhere. I've also read that you can insert a click box object and that that would do what I'm looking for but that doesn't work either.
    Does any such option exist and if so where/ how do I get to it/ use it. Please see attachments below. First screen shot is the first slide I get which isn't the first slide either, what's up with that? Next one is simply to show how the project just "plays" instead of advancing slide by slide. Third is my publish dialog box. Bottom line I don't want a "play" button I want the user to mouse click next, next, next etc. How do I do this?
    Thank you for any help or suggestions!

    Maybe I understand something wrongly, but thought you also wanted to know how you can make slides advance on clicking the Next button instead of having it playing on automatically? And instead of using the playbar you want to have a Previous and Next button?
    The way imported PPT with advance on Mouse click works is because there is a click box added to each slide that pauses that slide at its end. The user has to click on the slide to advance.
    A click box is an 'interactive' object: this means that you can have it pausing the slide, that the user can interact with it and trigger an action like 'Go to Next Slide'.
    You added (from what I see on the last screenshot) another interactive object, but now I'm confused: the third screenshot has a Prev and Next arrow, I think those are shapes. You do not need to add a click box on top of them (what I see on the last screenshot), they can be converted themselves into buttons. I blogged a lot about those shape buttons. Anyway, both click box and shape button can pause the slide. This is the case by default for click boxes (at the end of their duration, their timeline), for shape buttons you have to tell them to pause in the Timing accordion. In your case I certainly would choose a shape button because they can be put on a master slide, or timed for the rest of the project whereas Click boxes need to be unique on each slide, you'l have a lot of copy/paste to do then. In the Action accordion, On Success you choose the action, I think in this case you want 'Go to Next Slide' for the Next 'thing'
    As for the first screenshot, Rod explained that you cannot get rid of the play button for pdf output, but you can have a poster image instead of the blank screen. There is a folder icon in Preferences, Project, Start and End when you deselect AuotPlay.
    Here is a link to an article where I explain shape buttons:
    http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6
    There is an on-demand webinar as well on the Adobe site which I presented, only about shape buttons.
    Lilybiri

  • Automator - How do I: Mouse Click, Move Windows, and more

    Hello,
    I am attempting to create my own Automator programs and for a while I had some that worked nicely. I have recently been tweaking my iMac so that it can "think" on its own (by automator of course) and do things for me. However, I've run across a block with Mavericks (I believe it's due to Mavericks).
    1. How can I get Automator to register a mouse click? "Watch me do" does not seem to want to work for me at all. I also would prefer if it would just be a registered mouse click, but not actually use the mouse (I know this is possible) so that if I'm doing something and it runs, it won't disturb my mouse and I can keep working.
    2. How can I register a keyboard stroke? Same as above
    3. How can I have automator move windows? I have two monitors and there are times when I may want it to move a window from one mintor to another
    The following is a list of all the things I'm attempting to accomplish at the moment (with other things when I think of them) with automator (either through applications, folder actions, or ical actions):
    1. Register a mouse click at a given area or on a given element in a safari page
    2. Register a keyboard stroke in a given program (be able to focus on a program and then do the keystroke)
    3. Move windows from one location to another
    4. Full-screen and Un-full-screen iTunes at certain times of day
    5. Download all purchased items on iTunes that aren't on the computer (sometimes iTunes doesn't download stuff if it was downloaded on my MacBook Pro first)
    6. Automatically voice read reminders (that I've set in Reminders) each day at a given time (I can use loop to repeat it to make sure I hear it all)
    I'll think of more of course, but the mouse click, keyboard stroke, and moving windows is the big thing I'm trying to figure out how to do. Can anyone help?
    Also, I am not a computer tech. I am tinkering with this because it's fun and helpful, but an answer of "just use applescript" or "just use java" will likely just give me a headache. I know that it's going to be one of those codes, but I'm hoping someone has a "base" code that can be copied and pasted that's just a standard click that I can adjust for where I need to click and what process I need to click on.
    If there is an Action Pack that includes a "Register Mouse Click" and/or "Register Keyboard Stroke", then that would work great, but the only action packs for automator I've seen that work with Mavericks is for photoshop.

    You're asking for a lot in one post.  It would be better to break your requests down a bit. 
    For example, to deal with mouse clicks, you can use the Automator Action Run Shell Script with this python script:
    import sys
    import time
    from Quartz.CoreGraphics import *
    def mouseEvent(type, posx, posy):
            theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
            CGEventPost(kCGHIDEventTap, theEvent)
    def mousemove(posx,posy):
            mouseEvent(kCGEventMouseMoved, posx,posy);
    def mouseclick(posx,posy):
            mouseEvent(kCGEventLeftMouseDown, posx,posy);
            mouseEvent(kCGEventLeftMouseUp, posx,posy);
    ourEvent = CGEventCreate(None);
    # Save current mouse position
    currentpos=CGEventGetLocation(ourEvent);
    # Click the "Apple"
    mouseclick(25, 5);  
    # 1 second delay       
    time.sleep(1);        
    # Restore mouse position
    mousemove(int(currentpos.x),int(currentpos.y))
    It will look like this in Automator:
    To drag something (i.e. a window, a file icon) from position 40,60 to 60,300:
    import time
    from Quartz.CoreGraphics import *
    def mouseEvent(type, posx, posy):
               theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
               CGEventPost(kCGHIDEventTap, theEvent)
    def mousemove(posx,posy):
               mouseEvent(kCGEventMouseMoved, posx,posy);
    def mouseclickdn(posx,posy):
               mouseEvent(kCGEventLeftMouseDown, posx,posy);
    def mouseclickup(posx,posy):
               mouseEvent(kCGEventLeftMouseUp, posx,posy);
    def mousedrag(posx,posy):
               mouseEvent(kCGEventLeftMouseDragged, posx,posy);
    ourEvent = CGEventCreate(None);
    # Save current mouse position
    currentpos=CGEventGetLocation(ourEvent);
    # move mouse to upper left of screen
    mouseclickdn(40, 60);
    # drag icon to new location
    mousedrag(60, 300);
    # release mouse
    mouseclickup(60, 300);
    # necessary delay
    time.sleep(1);
    # return mouse to start positon
    mouseclickdn(int(currentpos.x),int(currentpos.y));
    For keystokes in AppleScript (which can be added to Automator with the Run Applescript Action) see: http://dougscripts.com/itunes/itinfo/keycodes.php

  • How can I (neatly) control mouse click events in a multi-dimensional array?

    Hello everyone!
         I have a question regarding the use of mouse clicks events in a multi-dimensional array (or a "2D" array as we refer to them in Java and C++).
    Background
         I have an array of objects each with a corresponding mouse click event. Each object is stored at a location ranging from [0][0] to [5][8] (hence a 9 x 6 grid) and has the specific column and row number associated with it as well (i.e. tile [2][4] has a row number of 2 and a column number of 4, even though it is on the third row, fifth column). Upon each mouse click, the tile that is selected is stored in a temporary array. The array is cleared if a tile is clicked that does not share a column or row value equal to, minus or plus 1 with the currently targeted tile (i.e. clicking tile [1][1] will clear the array if there aren't any tiles stored that have the row/column number
    [0][0], [0][1], [0][2],
    [1][0], [1][1], [1][2],
    [2][0], [2][1], [2][2]
    or any contiguous column/row with another tile stored in the array, meaning that the newly clicked tile only needs to be sharing a border with one of the tiles in the temp array but not necessarily with the last tile stored).
    Question
         What is a clean, tidy way of programming this in AS3? Here are a couple portions of my code (although the mouse click event isn't finished/working correctly):
      public function tileClick(e:MouseEvent):void
       var tile:Object = e.currentTarget;
       tileSelect.push(uint(tile.currentFrameLabel));
       selectArr.push(tile);
       if (tile.select.visible == false)
        tile.select.visible = true;
       else
        tile.select.visible = false;
       for (var i:uint = 0; i < selectArr.length; i++)
        if ((tile.rowN == selectArr[i].rowN - 1) ||
         (tile.rowN == selectArr[i].rowN) ||
         (tile.rowN == selectArr[i].rowN + 1))
         if ((tile.colN == selectArr[i].colN - 1) ||
         (tile.colN == selectArr[i].colN) ||
         (tile.colN == selectArr[i].colN + 1))
          trace("jackpot!" + i);
        else
         for (var ii:uint = 0; ii < 1; ii++)
          for (var iii:uint = 0; iii < selectArr.length; iii++)
           selectArr[iii].select.visible = false;
          selectArr = [];
          trace("Err!");

    Andrei1,
         So are you saying that if I, rather than assigning a uint to the column and row number for each tile, just assigned a string to each one in the form "#_#" then I could actually just assign the "adjacent" array directly to it instead of using a generic object to hold those values? In this case, my click event would simply check the indexes, one at a time, of all tiles currently stored in my "selectArr" array against the column/row string in the currently selected tile. Am I correct so far? If I am then let's say that "selectArr" is currently holding five tile coordinates (the user has clicked on five adjacent tiles thus far) and a sixth one is being evaluated now:
    Current "selectArr" values:
           1_0
           1_1, 2_1, 3_1
                  2_2
    New tile clicked:
           1_0
           1_1, 2_1, 3_1
                  2_2
                  2_3
    Coordinate search:
           1_-1
    0_0, 1_0, 2_0, 3_0
    0_1, 1_1, 2_1, 3_1, 4_1
           1_2, 2_2, 3_2
                  2_3
         Essentially what is happening here is that the new tile is checking all four coordinates/indexes belonging to each of the five tiles stored in the "selectArr" array as it tries to find a match for one of its own (which it does for the tile at coordinate 2_2). Thus the new tile at coordinate 2_3 would be marked as valid and added to the "selectArr" array as we wait for the next tile to be clicked and validated. Is this correct?

  • Mouse clicks not recognized?

    I have a 20" iMac w/ the most recent updates. In the past couple of days I have a problem with mouse clicks not being recognized. It seems to happen when I begin to fill in a text field either in Safari or the Finder (like trying to enter username/password, to authenticate in the finder, etc) The wierd thing is that this only happens on one of the two user accounts on this computer. I have also created a new user account and it is fine. I've looked for applications that are different, but can't find any. I have repaired permissions and repaired the disk through disk utility.
    I am at the end of my rope! Please help!

    I somehow managed to fix it, for now. I think I ended up resetting the PRAM. I gave up trying software solutions and unplugged everything, including the iMac's power cable, and cleaned up the mess of cables behind my desk because I needed some time to think. After starting up the computer, everything seems to be fine. If the problem comes back, I'll post here again. Thanks for the suggestion!

  • Mouse clicks count!

    Hello!
    I have a JTable. I added a mouse listener to it! The problem is that I cannot count the mouse clicks correctly!
    I have:
    mouseClicked(... e){
    e.getClickCount()
    but I only get 1 click, despite the double click I made!
    Does the table mouse listener erases the preceding event and never gets to count the second click? I got the behaviour of two single clicks!
    THANKS in advance!
    Rui Vale

    ... the the milli between the events... if they are say 40 milli or less the action is a double click...if not restart the chronometer...You can use other listener to...it depends on what you want to do!
    JRG

  • Mouse clicks on shapes drawn on canvas

    I'm having some trouble adding a mouseListener to a shape I've drawn on a canvas.
    I'm drawing a circle using g.drawOval() and then filling it in with the g.fillOval().
    The thing is I want the circle to be sensitive to mouse clicks on it, I'm trying to write the classic dots and boxes game, so I can draw a line from it to the
    next circle (dot) clicked.
    Unfortunately, the circle is not picking up on the mouseClicked event, I'm pretty sure my dotActions class works because I used it on another class which extends JLabel and it works fine, that is when the label is clicked the program exits, but when I add it to the Dots class it doesn't pick up on any mouse events.
    Here is my code, any help would be appreciated, thanks.
    public class Dots extends Canvas {
    public Dots(gameBoard gb, Graphics g, int x, int y, int hspace, int vspace){
    g.drawOval(x, y, 10, 10);
    g.fillOval(x, y, 10, 10);
    dotActions da = new dotActions(this);
    addMouseListener(da);
    public class dotActions implements MouseListener{
    public void mouseClicked(MouseEvent e){
    //this is a test to see if the mouse event is picked up
    System.exit(0);
    public void mouseEntered(MouseEvent e)
    public void mouseExited(MouseEvent e)
    public void mousePressed(MouseEvent e)
    public void mouseReleased(MouseEvent e)
    }

    Create a shape and add the listener to that as well as drawing to the screen.
    Or what I did was to save all the shapes and then test the mouse point to see if current mouse point was inside any. In my case I am using it to provide context sensitive help
    MArk
    * handle context sensitive tooltips - replaces default java
    * routine with our own which is context sensitive
    public String getToolTipText(MouseEvent e)
    Point raw_p = e.getPoint();
    //convert to our co-ords
    Point p = new Point(screenToScaledCoordsX((int) raw_p.getX()),
    screenToScaledCoordsY((int) raw_p.getY()));
    String tip = null;
    //check any tooltips to see if match found
    if (number_of_tooltips > 0)
    //check each object and get master tooltip text if inside rectangle if on
    //same page - go through all as text objects added before titles which will then be picked up
    for (int i = 0; i < number_of_tooltips; i++)
    if ((tool_tip_page[i] == last_page_id) &&
    (tool_tip_rectangle.contains(p)))
    tip = tool_tip_text[i];
    //return default or ours
    return tip;

  • How do I create a new folder to use for my Outlook 365 mail account? I know with pc all I had to do was to right mouse click.

    Wondering how to create new folders for my Outlook 365 mail account. I know with pc all I had to do was to left mouse click.
    Any suggestions?

    New folder where? If you added the account in Mail app it should of created the folders to store that email automatically.
    What email program are you using?

  • How can i run a jar file as EXE on mouse click..

    *{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*

    amrit_j2ee wrote:
    *{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*Do you mean converting it from a jar file to an EXE file or do you mean that you would like to run the application by just double clicking it?
    If it's the latter then you need to make the jar file including a manifest.
    The manifest can be just a txt file with its content to be something like this:
    Manifest-Version: 1.0
    Ant-Version: Apache Ant 1.7.1
    Created-By: Somebody
    Main-Class: NameOfTheMainClass
    Class-Path:
    X-COMMENT: Main-Class will be added automatically by buildTo make the jar file including the manifest, use something like this in your command prompt (of course you must have compiled your java file(s) first):
    jar cfm test.jar MANIFEST.txt NameOfTheMainClass.classAfter that you'd be able to run your application just by double clicking it.
    If you're a NetBeans user, you can build your standalone application by right-clicking your project and then going to properties => run => and choosing a Main class. After that right click on that project and "Clean and Build", locate the jar file in the "dist" folder and double click it =]
    Hope it helps,
    LD

  • Can spark datagrid mouse click be disabled while in a custom item editor?

    Hi,
    Is it possible to prevent a user from clicking on another cell in a datagrid until the cell currently being edited has had its data saved? 
    I would like to validate the cell's text data as it is being entered by a user, character by character.  If the validation fails, I would like to put up an error message and prevent the user from clicking outside of the cell.  I am able to validate the data and put up an error message.  But I have not found a way, if there is one, of disabling mouse clicks in other cells.  I've tried setting the IE's parent.editable, .enabled and .mouseEnabled properties to false.  But none of these are working for me.
    Thanks,
    -Adobegillisisle2

    The session does stay if I hit the TAB or RETURN keys.  I return false from my overridden save() function and the session stays keeping the user in the edit cell, allowing fixing the invalid data.   But I don't get the same behavior when I click the mouse on another cell.  In these cases, my save function is still called, and I still return false ( in the case where the validation fails ), but the edit session goes away. 

  • Middle mouse click no longer works after recent update

    I noticed after updating about 3 days ago that clicking the scroll wheel no longer acts as middle click on my MX Revolution mouse from logitech anymore. Pressing on the scroll wheel use to act as middle mouse click, now it just switches between scroll modes. I would like to have the former functionality returned as I really like to be able to open links in new tabs and paste with just one click.
    Does anyone know how I could get this functionality working again on this mouse? All other button functions work as they did prior to the update that changed my scroll wheel click behavior.
    Thanks for any help with this matter and please let me know if any other information is needed to diagnosis this problem.
    Last edited by daedalusman (2009-07-26 05:06:48)

    djszapi wrote:
    Does this mouse work with other OS/PC ?
    After a simple reboot or pacman -Syu, do you backup to roll back ? Can you mention which packages/files were updated?
    Yes the mouse works in windows, but logitech provides a configuration utility for it and so I use that set it up. In linux there is no such utility to configure the mouse. There use to be btnx and that worked great but it's no longer in the repos or AUR so I don't use that anymore. I haven't done pacman -Sc or pacman -Scc in a while so I should still have the packages to roll back, but I'm not sure what package update caused this. Here is a list of the of packages that were updated just before this started happening, from pacman.log...
    [2009-07-22 11:20] synchronizing package lists
    [2009-07-22 11:20] starting full system upgrade
    [2009-07-22 11:21] starting full system upgrade
    [2009-07-22 11:23] upgraded python (2.6.2-4 -> 2.6.2-5)
    [2009-07-22 11:23] upgraded brltty (4.0-2 -> 4.0-3)
    [2009-07-22 11:23] upgraded cairomm (1.8.0-1 -> 1.8.2-1)
    [2009-07-22 11:23] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
    [2009-07-22 11:23] upgraded devicekit-power (008-1 -> 009-1)
    [2009-07-22 11:23] upgraded dri2proto (2.0-1 -> 2.1-1)
    [2009-07-22 11:23] upgraded ptlib (2.6.2-1 -> 2.6.4-1)
    [2009-07-22 11:23] upgraded opal (3.6.2-1 -> 3.6.4-1)
    [2009-07-22 11:23] upgraded ekiga (3.2.4-1 -> 3.2.5-1)
    [2009-07-22 11:23] upgraded glibmm (2.20.0-1 -> 2.20.1-1)
    [2009-07-22 11:23] upgraded pango (1.24.4-1 -> 1.24.5-1)
    [2009-07-22 11:23] upgraded gtk2 (2.16.4-2 -> 2.16.5-1)
    [2009-07-22 11:23] upgraded libcanberra (0.12-1 -> 0.14-1)
    [2009-07-22 11:23] upgraded gnome-power-manager (2.26.2-1 -> 2.26.3-1)
    [2009-07-22 11:23] upgraded gstreamer0.10-base-plugins (0.10.23-1 -> 0.10.23-2)
    [2009-07-22 11:23] >>> Updating module dependencies. Please wait ...
    [2009-07-22 11:23] >>> MKINITCPIO SETUP
    [2009-07-22 11:23] >>> ----------------
    [2009-07-22 11:23] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-07-22 11:23] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-07-22 11:23] >>> More information about mkinitcpio setup can be found here:
    [2009-07-22 11:23] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-07-22 11:23]
    [2009-07-22 11:23] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-07-22 11:23] ==> Building image "default"
    [2009-07-22 11:23] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-07-22 11:23] :: Begin build
    [2009-07-22 11:23] :: Parsing hook [base]
    [2009-07-22 11:23] :: Parsing hook [udev]
    [2009-07-22 11:23] :: Parsing hook [autodetect]
    [2009-07-22 11:24] :: Parsing hook [pata]
    [2009-07-22 11:24] :: Parsing hook [scsi]
    [2009-07-22 11:24] :: Parsing hook [sata]
    [2009-07-22 11:24] :: Parsing hook [filesystems]
    [2009-07-22 11:24] :: Generating module dependencies
    [2009-07-22 11:24] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-07-22 11:24] ==> SUCCESS
    [2009-07-22 11:24] ==> Building image "fallback"
    [2009-07-22 11:24] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-07-22 11:24] :: Begin build
    [2009-07-22 11:24] :: Parsing hook [base]
    [2009-07-22 11:24] :: Parsing hook [udev]
    [2009-07-22 11:24] :: Parsing hook [pata]
    [2009-07-22 11:24] :: Parsing hook [scsi]
    [2009-07-22 11:24] :: Parsing hook [sata]
    [2009-07-22 11:24] :: Parsing hook [filesystems]
    [2009-07-22 11:24] :: Generating module dependencies
    [2009-07-22 11:24] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-07-22 11:24] ==> SUCCESS
    [2009-07-22 11:24] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
    [2009-07-22 11:24] upgraded lib32-libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-22 11:24] upgraded libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-22 11:24] upgraded libpng (1.2.37-1 -> 1.2.38-1)
    [2009-07-22 11:24] upgraded libtracker (0.6.6-1 -> 0.6.95-1)
    [2009-07-22 11:24] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
    [2009-07-22 11:24] upgraded mesa (7.4.4-1 -> 7.5-1)
    [2009-07-22 11:24] upgraded nautilus-cd-burner (2.24.0-1 -> 2.24.0-2)
    [2009-07-22 11:24] upgraded perl (5.10.0-5 -> 5.10.0-6)
    [2009-07-22 11:24] upgraded pycairo (1.8.4-1 -> 1.8.6-1)
    [2009-07-22 11:24] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
    [2009-07-22 23:38] adding new group: ntp
    [2009-07-22 23:38] adding new user: ntp
    [2009-07-22 23:38] installed openntpd (3.9p1-7)
    Hope this helps in figuring out this problem, thanks for your help.

Maybe you are looking for