Mouse clicks not working on published air app, works fine when debugging/testing

So I have an issue where when debugging my Air application, it runs fine and mouse clicks work and everything.  When I publish the application and install it, it plays fine but clicking does nothing.
We have an older version which is working when we publish it and we're trying to add things in one step at a time, but I figured I'd see if anyone else has had this issue.  A bit frustrating.
Thanks!

FIXED!!!!
We're using Dropbox to share files and it turns out that two people having project open at same time is a bad idea when doing final publish!  It creates conflict files and effects the final package or something of that nature.
Glad we got that one figured out!

Similar Messages

  • Mouse click not working

    i set up a new battery, i pressed command D without not cause. After that my mouse is not working, its noly moving and scroll. Does not CLick.what to do now?

    Please reset the SMC Control, Apple explains how in:
    http://support.apple.com/kb/ht3964

  • Smartform : line type not working fine when used on Next page

    Hi ,
    Please help on below :
    I have a smartform and have line type which is used in printing the items.
    When I use this line type on very first page , it works fine.
    But for the next page which is the exact copy of first page ,
    the line type does not work fine with printing first line item on next page,
    it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
    But on the next iteration it works fine and does not refresh work area.
    Please see why is such abnormal behavior happening.
    Regards,
    Uma Dave

    Hi Ameya
    there might be syntax error. Try to get what exaclty is an error using following code.
    CALL FUNCTION <smartform>
        EXCEPTIONS
        IF SY-SUBRC  0.
           CALL FUNCTION 'SSF_READ_ERRORS'
                IMPORTING
                     ERRORTAB = IT_ERRORLIST.
         ENDIF.
    In IT_ERRORLIST you will get error message.
    Regards
    Sachin G Patil

  • Right Mouse Click not working. Despite trying everything including reinstalling TB I can't get it to work on my Desk Top - works on my Laptop?

    I have tried reconfiguring my mouse including downloading up to date drivers. The frustrating part is it works fine on laptop

    Hmm- you're right.  I've run software update and the app store and it hasn't come up.. so I thought I was up to date (not to mention I just got the laptop a few days ago... and assumed it was updated).  I'll try that.  Thanks

  • Mouse click not working properly

    I just bought a macbook pro last week. Since using lion, I have noticed a problem clicking. Such as opening folders, minimizing windows, clicking the back space button etc. I click on a few folders and they open, and then I try to click on another one and it refuses to open no matter how many times I click on it unless I unselect it and try again. It is not consistent to specific folders/icons, it just happens at random. It is as if the OS is not registering clicks consistently, like it were a hardware problem. Also my right click malfunctions at times and will either not work or will behave like it is the left click and vice versa and takes awhile to regulate itself.
    Keep in mind I use both a wireless usb mouse and my trackpad and this is a problem I experience with both of them. I am using the latest version (10.7.3)

    Your warranty includes 90 days of phone support. Call AppleCare.

  • Webi: Mouse clicks not working

    Hi
    I am using BO XI 3.1, Webi 12. .1.0.882 client. It is not responding to mouse clicks although I can use keyboards to open the universe e.g.(even for logon).
    Any ideas why is this happening and how to sort this?
    Thanks for all help.

    I have the same problem some times.
    This is going to sound crazy, but try this:
    1. Lay the mouse down like you would if you were going to use it.
    2. Use you index finger and "bang" on the mouse like you were mad at it. Hit it where the primary button (left side for me) is. Don't be too aggressive.
    3. It should work. It has always worked for me.
    4. It also helps to clean the track ball. I just run the track ball back and forth on my jeans.
    Good luck!
    P.S. I do not think this will void any warranty, just don't tell Apple!

  • Mouse Clicker Not Working

    Hey
    You know how the mouse clicker is supposed to pop back up after you click it? Well only one side of my clicker does. The other side will not pop back up. I believe my laptop is still under warranty. If I take it into the Apple store can they fix it?
    Thanks

    If you are under warranty, just take it back and Apple should fix it.
    If you are out of warranty, I'm sorry no answer for that.

  • Mouse clicks not working

    Hello,
    I am managing a mac pro (leopard) from a macbook (leopard) using remote desktop 3.2. Often when I control the mac pro, and enter a user session the mouse clicks on the managed computer behave incorrectly. A normal click corresponds to a click with a side button (the ones that show all the windows on screen). When this happens I have no other solution than to reboot the managed machine because I can't control it with the mouse. (can't select anything)
    Has this happened to anyone else ?

    Oops. Doing the same thing again. If I disconnect/reconnect the mouse, the buttons get switched to the right position. After that log out/in and the buttons are again the other way around. To do a click have to press the command key while pressing the mouse button.

  • Fixed 30 Days calculation for any month..Not working fine when Split Occurs

    Hello Everybody,
    I am stuck with an issue..which is creating problem when there is a split..in Normal Conditions it's working fine...Kindly help me out on the same.
    We have to calculate the Salary on 30 Days fixed basis and not on calender days...
    <b>eg  For January Salary will be calculated based on 30 days and not on 31 days and for Feb also on 30 days not on 28/29 days.....</b>      Every thing is working fine for normal payroll i.e without any splits..
        <b>But if there are any splits  in the month then calculation for 2nd split goes wrong ....</b>
        Eg.  person is hired on 02feb 2007 and he got re-org on 17 feb 2007 with basic as rs.10000
      As per Clients requrement it should be calculated as  :
    for period 2nd Feb 2007 - 16th Feb 2007 : 10000 * 15/30  : Working Fine in SAP
    for period 17th Feb 2007 - 28th Feb 2007 : 10000* 14/30 :  Not Working  Properly  <b>In SAP calculation is done  as 10000*12/30</b>
    <b>We want it to calculate as 10000* 14/30</b>
    Kindly let me know wat can be done :
    1 How can i write PCR..if that needs to be change
    2. If user exit then how shall i go about the same
    if some body has any 3rd option let me know...
    Regards,
    Ketal Parikh

    Hi ,
    Solved the issue by writing rule.
    Regards,
    Ketal
    Edited by: Sikindar on Jul 3, 2010 10:28 PM

  • Magic Mouse click not working

    I have a magic mouse, with a MBP and 10.6.1 and the wireless mouse update installed.
    The mouse more or less works if "Secondary click" is checked. If I uncheck it, clicking does nothing. The mouse moves and scrolling works, but clicking has no effect.
    Also with "Secondary click" checked, if any part of my hand is touching the top surface of the mouse, I get a right-click when I click - makes the grip kind of awkward.
    Tried re-installing the software update.
    Any ideas? Thx.

    Not sure why it worked this time, but I deleted
    com.apple.driver.AppleBluetoothMultitouch.mouse.plist
    from the User preference folder again, and now the mouse is behaving as normal. I did not touch the .globalpreferences file.
    I did clean all the system/user caches (using Cache Out X), and then deleted this file again, but now the behavior seems correct
    - with Secondary Click deslected, the surface acts as one big single click button
    - with Secondary Click selected, it acts as a two button mouse
    - in Secondary Click mode, resting your second finger on the contexual side surface while clicking on the single click side surface does not interfere with the single click as it had before
    - in Secondary click mode, you need to lift your finger off the single click side when clicking the contextual button side, or it will not register as a contexual click. I presume this is expected behavior, as it is physically a one-button mouse, and Apple opted for a two-finger click to be interpreted as the more common single click request.
    Hope this helps some

  • Mouse clicks not working: hyperlinks and closing tabs require multiple clicks

    When I click on the "x" icon to close a tab the tab will not close. After clicking a second, or sometimes third time, the tab will close. Same thing happens with hyperlinks. Also, Firefox seems slow and lethargic.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • JSlider and mouse click not working

    I am using a JSlider class so the user can choose a population size. I'm showing the slider with a scale from 0-100.
    When I move the slider button with my mouse the value changes. However, when I click anywhere else on the slider, nothing happens. It should be moving to the next minor tick. Here is my code snippet:
    import javax.swing.*;
    import javax.swing.event.*;
    import java.awt.*;
    import java.awt.event.*;
    (here's the construction of the slider)
    private JSlider m_popSizeSlider = new JSlider(0,100,20);
    m_popSizeSlider.addChangeListener(new SizeSliderHandler());
    // now handle the size slider
    m_popSizeSlider.setPaintTicks(true);
    m_popSizeSlider.setPaintLabels(true);
    m_popSizeSlider.setSnapToTicks(true);
    m_popSizeSlider.setMajorTickSpacing(20);
    m_popSizeSlider.setMinorTickSpacing(5);
    comboPanel.add(new Label("Size of Population: "));
    comboPanel.add(m_popSizeSlider);
    (here's the change listener code - defined as an inner class)
    class SizeSliderHandler implements ChangeListener
    * <p> This method is called when the user clicks on the size slider
    public void stateChanged(ChangeEvent e)
    JSlider s = (JSlider) e.getSource();
    m_popSize = (int) s.getValue();
    //System.out.println(m_popSize);
    so what am I doing wrong?
    thanks
    barry

    This page has lots of examples:
    http://www.esus.com/docs/GetIndexPage.jsp?uid=301

  • Sprinter 12.20 Not Working Properly When Editing Test Plan That Was Recorded

    After using the steps tracker to create a test plan, I am experiencing an error when tring to edit the steps/expected result.  It is showing different information before and after clicking into the box.  Below are two screenshots.  On step 88, you can see that they don't match, when they should.  Saving and restarting temporarily solves the issue, but it then reoccurs about every five minutes. 

    Interestingly enough I had been using the Player 10 SWC from the beginning because I had the intention of using the RTMFP protocol to enable P2P chat when available, so for some reason even using Player 10 I am having no success with this external mic. It is possible I am doing something incorrect in my project configuration, but I don't think that is the case.
    When I deploy my app to our target device which runs an embedded Windows OS the audio is properly transmitted when using a 3rd party mic, leading me to believe this is a Flash - Mac issue as stated. I believe I will be able to work around this in the interim, but a long term solution would be extremely helpful as our host platform will likely be variable.
    I am a new Flex user, and straight away I've jumped into using the AFCS package. I must say it is incredibly comprehensive and very well implemented. I hope the performance improvements for embedded devices in Player 10.1 will quickly make their way into this library as they are released, or better yet the Player 10 source so we can poke at prod at what's under the hood.
    Thank you for the quick response.

  • Why can't I zoom in and out on my MacBook Pro trackpad with my fingers it was working, now I have to use command + or - to zoom in and out? It works fine when I test it with Safarie or Google Crome browsers!

    When I try to make a web page larger to view text better, I can no longer use my trackpad to do so. I must do this manually!

    Yeah, that's what I ended up doing. It just wasn't worth the hassle. I got a good (standard size) monitor for about half the price of the old one, so I'm not too disappointed. Thanks for your help though

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

Maybe you are looking for

  • One user can't get Outlook to work

    Hi, We have one user who is having problems with Outlook. It started a few weeks ago, and no one else is having the same problem. It says "The connection to Microsoft Exchange is unavailable. Outlook must be online to complete this action" Environmen

  • IPad volume doesn't work with 3rd party apps & volume slider gone.

    After even a Slide to Power Off, I'll reboot the iPad and I'll launch, say, The Daily Show app. What I encounter is that there is no volume. The physical volume switch has no affect. The volume slider in the video player has been replaced by the word

  • Set up withholding tax

    Hi I have created an sales invoice .whenever I transfer to A/r invoice ,after putting tax code ,it opens withholding tax for editing . It pops up with the window  .So far I have defined withholding tax ,tax categories ,tax  codes . When I try to chos

  • How to uninstall browser add~on's

    How to uninstall browser add~on's for the safari, via the app store...?

  • Checking Multiple condition in Mapping

    Hi , I need to check multiple OR condition in Message mapping should i need to write an U.D.F. For example:I has a field MATNR where the possible values are WE,WB,AR I need to check the condition Using OR condition MATNR                        EQUALS