Mouse Control Panel Looses scroll options and multi-button options

Hello-
I just bought the new Magic Mouse. Once it is paired with my bluetooth the mouse works fine but the Mouse control panel looses the secondary button and scroll options. Mouse will not scroll normally or momentum scrolling. As well the Bluetooth control pane does not show mouse battery level reading, and there is no Mouse name. What's happening here??
G5 PowerMac with 10.5.8 and normal wired extended keyboard.
Thanks,
Kevin

Hi,
Good to hear it's Ok and hopefully all the malware has been removed.
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • I have iOS 7, but when I swipe up to control panel, the airport, airplay,and whatever the three icons shown below on the web picture are, do not come up, only the volume, brightness etc. how do I get them to show?

    I have iOS 7 , but when I swipe up to control panel the airport,airplay, and the icon that are supposed to be under them are not there. How do I make them come up?

    If you don't see the AirPlay icon in Control Center:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad

  • Magic Mouse Control Panel Restore?

    Previous steer mouse driver with mighty mouse, now with lion with magic mouse, i don't see proper magic mouse control panel. how to restore?

    Steer mouse isn't compatible with the Magic Mouse.  You can uninstall steer mouse drivers with these instructions:
    http://plentycom.jp/en/steermouse/support.cfm
    Then your Magic Mouse Preferences panes will show.
    Regards,
    Captfred

  • Custom XML IP PHONE text on "Your current options" and softphone button on

    Custom XML IP PHONE text on "Your current options" and softphone button on call manager 7.0 call manager 7.0 ?

    Hello, Please try this link
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/5_0/sip/english/administration/guide/11ag50si.pdf

  • Custom XML IP PHONE text on "Your current options" and softphone button

    how maually or reconfigure the Custom text on "Your current options" and softphone button on the call manager 7.0 ?
    There is no documentation ?

    Hello, Please try this link
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/5_0/sip/english/administration/guide/11ag50si.pdf

  • The Flash Text and Flash Button options have dissappeared

    the Flash Text and Flash Button options have dissappeared in the insert menu in Dreamweaver CS4. They used to be there but not now

    Adobe announced the features they were removing from CS4 a year or so before CS4 launched:
    The ill-conceived Flash buttons and Flash text were among the deprecated features.
    http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS2C41F19D-502B-4fb5-8A54-4442E2127C84a .html
    Deprecated features
    The following features have been deprecated for Dreamweaver CS4:
    Timelines
    Web services
    Layout mode
    Site Map view
    Java Bean support
    Adobe® Flash elements (Image Viewer)
    Adobe® Flash text and Adobe® Flash buttons
    ASP.NET and JSP server behaviors and recordsets

  • Flash Text and Flash Button options have dissappeared in DW CS4

    the Flash Text and Flash Button options have dissappeared in the insert menu in Dreamweaver CS4. They used to be there but not now

    You need the Dreamweaver forum - click here.

  • HFM icons,explore option and Financial Reporting option missing from Workspace 11.1.2.1

    Hi,
    We finished installing and configuring hyperion 11.1.2.1. We noticed unusual behavior in Workspace, All the HFM icons are missing from the menu , it is showing some hfm path. Explore option and financial reporting options are also missing from the Preferences and workspace. Can you please advice what could be causing this issue ?
    Regards,
    Andy

    Hi Thanos,
    Thanks for the reply. Actually i tried to login to HFM client but it says application not registered. So when i tried to register it from workspace, it gives error.  I have already configured all the components but i didn't reconfigure Foundation web server after every component. Is it okay if i do it now when all the components  are already configured ? Or do you suggest reconfiguring all the components again followed by Foundation web server ?
    Also do you think it will help me get explore option in the workspace ?
    Kindly advice. Appreciate your help.
    Regards,
    Andy

  • We try to unistall from control panel or helper folder and nothing happens. What are the next step.

    We want to upgrade Mozila to a new version. When we try to upgrade from your web site, nothing happens.
    When we follow your recommendation to unistall the program from control panel or helper folder, the folder doesn't open.
    we need to force the unistall to upgrade the new version.
    Thanks for your advice.
    Julio

    I had the same issue. To resolve it, I:
    1. Backed up my bookmarks to my desktop;
    2. Deleted the Mozilla Firefox folder (in the C:\Program Files folder).
    3. Reinstalled Firefox
    4. Uninstalled Firefox (to make sure any registry entries that may have been causing problems were removed)
    5. Reinstalled Firefox again
    6. Imported bookmarks.
    7. OPTIONAL: Reinstall any add-ons I regularly use
    I no longer have the problems with slow performance or websites hanging that I had after originally upgrading to Firefox 7.
    Obviously if you just want to uninstall, you only need to do steps 2 through 4. I wanted to continue using Firefox and was just trying to resolve the issues I was having browsing the web since upgrading to 7.

  • Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

    HP Pavilion m6-1035dx, product B5S06UA#ABA
    Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

    I suspect this may all be related to a common cause.
    When updating the windows experience index, what is the error message you receive?
    Has the video card driver been installed? It is necessary for the windows experience index to complete.
    Also, ensure the HP Software Framework is installed.  It is under the Software Solutions category.  
    You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • [Request] Move Windows Control Panel applet from "System and Security" to "Programs"

    The "Flash Player (32-bit)" Windows Control Panel applet should be  moved from "System and Security" to "Programs" where the Java applet is.
    Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=2953107
    Thanks

    njb,
    Why not just run the ThinkVantage System Update and let it install as usual. You can also "un-check" those drivers that you don't want to install.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • What is the differences between PC Settings and Control Panel in Windows 8 and later

    Background:
          I made a windows driver. I need to let the settings of it can be searched in 2 places:
                   1.Search box of the Control Panel page
                   2.Search box[Settings] when press the [Win] + W Keys.
          Now the 1st place has been supported, but did not find out the method for 2nd place.
          About Windows Search I just find out the search guide for file systems, does anyone know how to support the 2nd Search box[Settings].

    What region are you in? I heard that there are no separate student and education versions anymore.
    If it actually says "Education edition" somewhere then I'm guessing 1 of 2 things:
    1. "Education Edition" is just another name or title for "Student + Teacher Edition"
    or
    2. The "Education Edition" is the volume licence equivalent of the Student + Teacher Edition (which is a single licence for personal use on one computer only).
    Don't take my word for it though. I'm new to all of this (looking to buy my first Adobe software products)
    I'm in Australia and I can only buy Student + Teacher Edition (no Education Edition).
    Did you receive a physical CD copy of the suite?

  • How: Using the same control panel for multiple vi and propogatin​g changes to the control panel.

    I have created a labview project that contains about 40 vi.  Each vi has a control panel in common that is a group of ip address, or port address, and settings that are passed from high level vi to low level vi for the purposes of controlling and accessing our daq cards.  As this control panel exist in all vi's and is required to be identical there is a problem when needing make a change or update the controls during development.  The problem is how much time it takes to go and change every single vi's control panel.  I wish to have a way of propogating a change in the control panel across all vi simultaneously.
    All control in the control panel are in a bundle, so all values are passed in 1 wire. 
    I tried turning the control panel into a sub vi, and this way I can just "create control" and have outputs of the vi maniuplate settings, however if I update the vi, I still have to go back and create a new control for each vi as the control has changed.
    I have tried using the subpanel and creating the control panel in a sub vi that is displayed in the subpanel, but this gives the unwanted consequence of not being able to view or change settings on the control panel if the program is not running, as subpanels blank out when the program is not running.
    Is there another way to dispaly a subvi's front panel beside using a sub panel?  Is there a better way to propogate changes in a bundle throughout a series of vi? 
    JW
    Solved!
    Go to Solution.
    Attachments:
    Labjack Comm Settings.vi ‏15 KB

    Yes a type def would help you out and I'd take the next step to make it a strict type def if you want the appearence to be the same across all of its instances. You can also review this Nugget on Type definitions for more idea on this topic.
    Have fun,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • RIPPLE EFFECT when using mouse to click on scroll bar and scroll

    Has anyone else had this problem? I have tried 4 new 24" iMac's and ALL FOUR do this! When you click on the scroll bar and scroll down or up, there is a definite "ripple" in the window of what you are looking at. It's as if you put a steel rod under a sheet and pulled it up and down. It only happens when using the mouse to click and scroll. Not with the track ball, not with the arrows, not with the keyboard. I updated Safari, tried using Firefox instead, installed all the OS updates, but it still happens. So far no one in Support has a clue. The display models at the stores didn't do it, but my guess is they are from an older shipment...so maybe this is an anomaly with imac's shipped after April 10.
    Try it on your computer and see if it happens. If so, we need to all let Apple know there needs to be a fix.

    HI,
    Quit Safari.
    Go here: MacintoshHD/Library/Preferences and locate this file.
    com.apple.windowserver.plist
    Drag that file to the Desktop. Launch Safari and see if the scroll functions as it should. If it's ok, drag that file to the trash, empty the Trash and restart your Mac.
    Carolyn

Maybe you are looking for