Mouse Cursor Problem on Android RD Client Application

Hi;
I am use to Lenovo tablet. my problem is rd client mouse cursor. the cursor positions on left and top corner always. do not item select. do not item click.
Help me, please.

Hi Sir,
>>The week before it work perfectly and we have had nothing changed since then except for the fact that we have changed the RD web access public IP to the same as the RD Gateway's
Is it possible to change the public IP back for troubleshooting ?
Beset Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

Inlarged mouse cursor problem

hey every1
I have the inlarged mouse problem sounds bad but not as bad as an inlarged prostate lol
My system is win7 64 pheon 550 ,m3a board,audgy2 and 5770
The problem is .....at any time the mouse cursor increases size to extra large and its very annoying.When checking mouse settings everything is set to normal.
The only fix i could find that stopped this is ....enable mouse tale then it stays normal size but having the tale is very annoying
There are also hot fixes at ati but dont work cheers steve

ive solved the problem
i have a nortek cordless mouse and have had for a year and worked faultless with a nvidia card but when i upgraded to an ati 5770 this problem started.
i have searched the net and found other people with the same problem but its not common.Ive posted this problem here and at driverheaven and some of the replies to this problem were good but didnt help.
A lot of people hadnt seen this before so i took a screen shot and posted it.
Yesterday i was tiding my desk and came across the old driver disk for my mouse and thought lets chuck it in and install him
Its been nearly 48 hours and no inlarged mouse so i,m thinking the win7 mouse drivers or something like that.....I relly hope it helps some1

Mouse cursor problem (dock magnification, highlight issue)

My logitech wired USB mouse has an issue with my iMac. It worked for a couple weeks. After then, whenever it is plugged in, it does not magnify the dock, nor highlight things correctly (cursor does not turn into hand over links, does not open nor highligh menus unless clicked, etc).
After searching, this problem has dated back years and across OS X versions, usually having to do with a wireless or wired Logitech mouse (which mine is). The first thing people suggest is restarting/killing dock, re-install OS, repair permissions, among other things. This rarely fixes the issue. The solution that seems to fix it for most people is to simply unplug the mouse and plug it back in. Most people state this fixes it until it happens again a week later and either they do the unplug-plug again or just give up and switch to another mouse.
I have tried re-plugging it back in but it doesn't solve the issue. Other mice work just fine which I've have gone to, but I really want to use that mouse (plus, I hate giving up!)
Can anyone help me? I'd appreciate it! Thank you!
EDIT: Here are some more clues to the puzzle:
- The mouse works fine on multiple other computers
- Other people have described this problem as the iMac no longer knows where the mouse cursor is until a mouse-click is pressed. That is why it doesn't open menus, magnify the dock, change into a hand when hovering over a link, etc. To open and select a menu at the top of the screen, for example, the left mouse button must be clicked and held, then let go of when you want to choose something.
Message was edited by: vsonline11
Message was edited by: vsonline11

zmbmartin wrote:I have a problem with webkit based browser and was wondering if someone else had the same problem and/or had some ideas on how to fix it. In webkit browsers my mouse/cursor does not respond to state changes. So when I hover over a link the mouse/cursor does not change to a hand or when I hover over a text box it doesn't change to the text cursor. It is really annoying. If I do click on a link after I click the cursor turns into a hand and then stays that way no matter what I hover over.
Just a remark:
I'm also facing a similar problem running chromium on 32-bit arch with KDE. When I move the mouse cursor over the edges/corners of the browser the mouse cursor changes state (so a s to show arrows used for changing windows size) but uses the default X11 theme instead of my KDE mouse cursor theme....
Also I'm using gtk-kde4 for gtk apps in KDE.
Last edited by bhadotia (2011-01-10 15:22:27)

Mouse cursor problem with CS4 64 bit under Windows 8.1

When using tools such as the various lasso tools, I get three cursors in a horizontal line, the leftmost one being the active one. Then when I click in a panel, it turns into a hieroglyph resembling three small vehicles or boats in a line. I don't know if this is related to the reputed bug that plagues gamers using Win 8.1. Any suggestions greatly appreciated.

I seem to have solved my problem and give the solution for the benefit of anyone else encountering it.
I had right clicked on the Desktop and selected Screen Resolution. I then clicked on 'Make text and other items larger or smaller' and moved the slider to the right to make the PS panels larger.
This seems to have caused the problem, and I overcame it by returning the slider to the central position and then reducing the screen resolution to bring the panels up to the desired size.

Mouse cursor problem when external display connected

When my external Apple display is connected to my MacBook Pro (Retina, Mid 2012, 10.10.2) the cursor jumps to a spot on the external display and will not release from it. I move the cursor anywhere and it jumps back to that original spot. Cursor operates normally when the external monitor is not attached. I've used the monitor for a few years with no problem, but this started just recently. I do not use the external monitor daily and I cannot recall doing anything that might have triggered this problem. Any ideas on a fix? Thanks.
Bill

Just an update to close this. Call Apple Support. An advanced support tech walked me through several procedures. Eventually, the problem disappeared after deleting a bunch of plist files and startup items. Which particular file caused the problem we don't know. But problem gone and I will monitor going forward. Hopefully it was a one-time corruption of one of the preference files.

QEMU mouse cursor problem

Hello folks, I was trying to have a little fun with QEMU, so I installed Arch and Xorg in it, but after starting X then twm through startx, my mouse pointer shows only until I click for the first time, then becomes ad stays invisible even if I reboot; a poweroff is necessary. Here's the QEMU command used:
qemu-system-x86_64 -netdev user,id=vmnet -device e1000,netdev=vmnet -enable-kvm -cpu host -smp 4 -m 2048 -drive file=VMs/arch.img,index=0,media=disk,format=raw -usbdevice mouse
(I already installed and used Gentoo with success with this command without -usbdevice mouse)
And here's the Xorg.0.log: http://paste.pound-python.org/show/Qimj … BGkwIW7Sy/
The QEMU wikipage and doc says that -usbdevice mouse overrides the PS/2 mouse emulation, but ImExPS/2 Generic Explorer Mouse is detected at some point by Xorg.
I must say that I do not fully understand the situation here.

Hmm, it's strange. Usually, you have to point the mouse on the border of a window to resize it or press "alt" and click on the border to move it..

Why does the mouse cursor move to away from the currrent application without the mouse being moved

the mouse cursor moves away from the current application without the mouse having been moved - this started with the new version - re-installing Firefox makes the problem go away for a short period - re-installing is not a solution
== This happened ==
Every time Firefox opened
== a few days after installing 3.6.3

Hello Jim.
It's probably one of three things:
#your mouse is getting old (this behavior is common in old optical mouses);
#you have software that is making your mouse cursor behave unexpectedly (I know of an option in Windows that will automatically move your mouse to windows buttons...);
#or you may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[SOLVED]Mouse cursor changes between applications

Hi, everyone this thing is driving me crazy. I'm still searching for some good solution for this.
When i move the mouse cursor over a kde or java application (using gnome) the cursor changes to the system default, that black ugly thing. I know there is a way to do it by changing the default cursor theme, but when i do it kde and java applications don't launch. Someone please explain this on easy words, or some other solution please!
Last edited by Hyugga (2010-05-16 03:38:12)

Try to set Xcursor theme in ~/.Xdefaults
$ grep Xcursor ~/.Xdefaults
Xcursor.theme: Neutral_Plus
Works for me in DWM
Last edited by oew (2010-05-15 04:48:42)

Losing mouse cursor

Hi All!
I'm losing my mouse cursor everytime I pass from any application (Apple or not) to the finder. I only get it back when it comes over the dock. Anyone know about this issue?
FB

Create a new user and see if the mouse issue exists with the new user.

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

Get screenshot with mouse cursor and send for client application

I took
this function for getting a screenshot from a client application. I to tried adapt this function in my project, but I can not capture desktop showing mouse cursor (coming from a remote pc) in my server application (controller).
Here is my adaptation (in client side) but without success:
void SendScreenProc()
// Send First Bitmap
MemoryStream streamScreen = new MemoryStream();
this.bmpScreenSend = CaptureScreen(true);//new Bitmap(this.boundScreen.Width, this.boundScreen.Height, PixelFormat.Format24bppRgb);
Graphics g = Graphics.FromImage(this.bmpScreenSend);
g.CopyFromScreen(0, 0, 0, 0, this.boundScreen.Size);
this.bmpScreenSend.Save(streamScreen, System.Drawing.Imaging.ImageFormat.Png);
Compress.CompressStream(streamScreen);
Byte[] bufferScreen = streamScreen.ToArray();
mreSendData.WaitOne();
this.queueSendData.AddScreen(streamScreen.GetBuffer());
streamScreen.Close();
this.receivedScreen = 0;
while (this.remoted)
// Send next bitmap result by difference with previous bitmap.
if(this.receivedScreen == 0) {
} else {
Bitmap bmpCurrentScreen = CaptureScreen(true);//new Bitmap(this.boundScreen.Width, this.boundScreen.Height, PixelFormat.Format24bppRgb);
g = Graphics.FromImage(bmpCurrentScreen);
g.CopyFromScreen(0, 0, 0, 0, this.boundScreen.Size);
if (this.receivedScreen == 1) {
if(this.bmpScreen != null) {
this.bmpScreen.Dispose();
this.bmpScreen = this.bmpScreenSend;
} else if(this.receivedScreen == 2) {
if (queueSendData.AvailableScreenAdd && IsDifferent(bmpCurrentScreen, this.bmpScreen))
streamScreen = new MemoryStream();
Bitmap bmpDiff = XorBitmap(this.bmpScreen, bmpCurrentScreen);
bmpDiff.Save(streamScreen, System.Drawing.Imaging.ImageFormat.Png);
this.bmpScreenSend.Dispose();
bmpDiff.Dispose();
this.bmpScreenSend = bmpCurrentScreen;
mreSendData.WaitOne();
this.queueSendData.AddScreen(streamScreen.GetBuffer());
streamScreen.Close();
this.receivedScreen = 0;
else
bmpCurrentScreen.Dispose();
Thread.Sleep(30);

Hi FlashCoder,
Do you mean like this capture? Use mouse cursor to capture the specified area.
If so, here is a sample that I wrote. It should meet your requirement. If not, please feel free to let me know.
The following is ScreenForm code
public partial class ScreenForm : Form
public ScreenForm()
InitializeComponent();
public event copyToFatherTextBox copytoFather;
public bool begin = false;
public bool isDoubleClick = false;
public Point firstPoint = new Point(0, 0);
public Point secondPoint = new Point(0, 0);
public Image cachImage = null;
public int halfWidth = 0;
public int halfHeight = 0;
/*Copy the entire screen, and form fill the screen*/
public void copyScreen()
Rectangle r = Screen.PrimaryScreen.Bounds;
Image img = new Bitmap(r.Width, r.Height);
Graphics g = Graphics.FromImage(img);
g.CopyFromScreen(new Point(0, 0), new Point(0, 0), r.Size);
//Maximize form
this.Width = r.Width;
this.Height = r.Height;
this.Left = 0;
this.Top = 0;
pictureBox1.Width = r.Width;
pictureBox1.Height = r.Height;
pictureBox1.BackgroundImage = img;
cachImage = img;
halfWidth = r.Width / 2;
halfHeight = r.Height / 2;
this.Cursor = new Cursor(GetType(), "MyCursor.cur");
private void ScreenForm_Load(object sender, EventArgs e)
copyScreen();
/*Begins when the mouse is pressed screenshots*/
private void pictureBox1_MouseDown(object sender, MouseEventArgs e)
if(!isDoubleClick)
begin = true;
firstPoint = new Point(e.X, e.Y);
changePoint(e.X, e.Y);
msg.Visible = true;
/*Displayed when the mouse moves to intercept the border*/
private void pictureBox1_MouseMove(object sender, MouseEventArgs e)
if (begin)
//Redraw the background image
secondPoint = new Point(e.X, e.Y);
int minX = Math.Min(firstPoint.X, secondPoint.X);
int minY = Math.Min(firstPoint.Y, secondPoint.Y);
int maxX = Math.Max(firstPoint.X, secondPoint.X);
int maxY = Math.Max(firstPoint.Y, secondPoint.Y);
Image tempimage = new Bitmap(cachImage);
Graphics g = Graphics.FromImage(tempimage);
//Picture cropping frames
g.DrawRectangle(new Pen(Color.Red),minX,minY,maxX-minX,maxY-minY);
pictureBox1.Image = tempimage;
//Calculation of coordinate information
msg.Text = "Upper left corner coordinates：(" + minX.ToString() + "," + minY.ToString() + ")\r\n";
msg.Text += "Lower right corner coordinates：(" + maxX.ToString() + "," + maxY.ToString() + ")\r\n";
msg.Text += "Screenshot size：" + (maxX - minX) + "×" + (maxY - minY) + "\r\n";
msg.Text += "Double-click end screenshots anywhere!";
changePoint((minX + maxX) / 2, (minY + maxY) / 2);
/*Dynamically adjusts the displayed location, enter the parameters for the current screen mouse position*/
public void changePoint(int x, int y)
if (x < halfWidth)
if (y < halfHeight)
{ msg.Top = halfHeight; msg.Left = halfWidth; }
else
{ msg.Top = 0; msg.Left = halfWidth; }
else
if (y < halfHeight)
{ msg.Top = halfHeight; msg.Left = 0; }
else
{ msg.Top = 0; msg.Left = 0; }
/*Screenshot is completed when you let go of the mouse operation */
private void pictureBox1_MouseUp(object sender, MouseEventArgs e)
begin = false;
isDoubleClick = true;
/*When I double-click a screenshot when notifying parent form complete screenshot action, while closing the form*/
private void pictureBox1_DoubleClick(object sender, EventArgs e)
if (firstPoint != secondPoint)
int minX = Math.Min(firstPoint.X, secondPoint.X);
int minY = Math.Min(firstPoint.Y, secondPoint.Y);
int maxX = Math.Max(firstPoint.X, secondPoint.X);
int maxY = Math.Max(firstPoint.Y, secondPoint.Y);
Rectangle r = new Rectangle(minX, minY, maxX - minX, maxY - minY);
copytoFather(r);
this.Close();
//msg.Text = r.ToString();
This is the mainFrom code.
public delegate void copyToFatherTextBox(Rectangle r);
public partial class Form1 : Form
public Form1()
InitializeComponent();
/*Start screenshot*/
private void button1_Click(object sender, EventArgs e)
ScreenForm screen = new ScreenForm();
screen.copytoFather += new copyToFatherTextBox(copytoTextBox);
screen.ShowDialog();
/*Screenshot of subsequent operations*/
public void copytoTextBox(Rectangle rec)
Rectangle rec2=rec;
if(rec.Width>2&&rec.Height>2)
rec2= new Rectangle(rec.X + 1, rec.Y + 1, rec.Width - 2, rec.Height - 2);
Rectangle r = Screen.PrimaryScreen.Bounds;
Image img = new Bitmap(rec2.Width, rec2.Height);
Graphics g = Graphics.FromImage(img);
g.CopyFromScreen(rec2.Location, new Point(0, 0), rec2.Size);
Clipboard.SetDataObject(img, false);
richTextBox1.Paste();
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle forms application login cursor problem

Hi,
Goodmorning to all. I've a problem here. I've an application in Forms 6i istalled in my system which has a problem in the Login page where when you press the Tab button, the cursor is moving from one item to another. It is working fine in another system but this is the client's system on which I'm facing the problem . I reinstalled the application 3 times but to no effect. Can anyone help me out?
Thanks in advance,
Nitin

You really were not very clear. What exactly is the problem? Is the cursor not moving, is it moving to the wrong item, etc?
Additionally, is this a web form or client/server? What is the client platform and version? If a web form, which browser and version? If web, which Jinitiator or Sun JRE version? What is the complete Forms 6i version?

Sending email via android email client from Air application

Hello!
I'm creating an Air application for Android and was wondering if it's possible to send an email via the android/gmail client within the application.
Thank you for any help or direction in advance
sjhitta

Hi Jari,
Thanks to reply me.
There is an workspace details where user solve that problem but now i have troed to access that workspace but its not working .i have cofusion how can i do this where i put
apex_mail.send(
p_to => v_recipient_list
, p_from => v_from_list
, p_subj => 'Hello world'
, p_body => v_body
, p_replyto => null);
this package
and how to and where set SMTP of Gmail and i don't know about gmail SMTP Server Specification
i ahve jus create a form with
P1_TO Text Field
P1_SUBJECT Text Field
P1_FILE_BRE File Browse...
P1_COMMENT Textarea
Please guid me...how can i do that step by step
Thanks

SBS Client Application Launcher has encountered a problem and needs to close

I logged in to a remote session on the SBS to add a user to a security group. Now, when I log on to my computer with the domain administrator account, I get the error "SBS Client
Application Launcher has encountered a problem and needs to
close." There is an event in the Application log associated with the error:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date:  8/29/2011
Time:  2:27:46 PM
User:  N/A
Computer: CONTROLLERASST
Description:
Faulting application applnch.exe, version 5.2.2893.2, faulting module applnch.exe, version 5.2.2893.2, fault address 0x0002442a.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 61 70 70   ure app
0018: 6c 6e 63 68 2e 65 78 65   lnch.exe
0020: 20 35 2e 32 2e 32 38 39    5.2.289
0028: 33 2e 32 20 69 6e 20 61   3.2 in a
0030: 70 70 6c 6e 63 68 2e 65   pplnch.e
0038: 78 65 20 35 2e 32 2e 32   xe 5.2.2
0040: 38 39 33 2e 32 20 61 74   893.2 at
0048: 20 6f 66 66 73 65 74 20    offset
0050: 30 30 30 32 34 34 32 61   0002442a
0058: 0d 0a                     ..
After clicking to send/not send an error report, I get back to the desktop where all appears normal. However, I can no longer access the internet while logged in under this account.
I can log in on another PC with the domain admin account with no error.
Any help would be appreciated.

Hi,
I would like to suggest you run System File Checker with command: sfc /scannow to scan and repair the system files.
If it does not work, please also test the issue in Clean Boot.
Clean Boot
================
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading
program or service. Please perform the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System
Configuration Utility when Windows starts" box and click OK.
What’s the result in Clean Boot?
For more information regarding Event ID 1000, please refer to the following link:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2&EvtID=1000&EvtSrc=Application%20Error&LCID=1033
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Mouse Cursor Problem on Android RD Client Application

Similar Messages

Maybe you are looking for