Mouse cursor refuses to leave center of monitor after awakening.

Mouse cursor refuses to leave center of monitor after awakening.
So it requires a hard reboot since I can't access the menus, etc.
The cursor simply refuses to move away from a central region and if I try to move it out of this area the cursor snaps back.
Has anyone else heard of a similar problem?
I'm using USB Overdrive with my Logitech MX Performance mouse and OS X 10.6.5.
Never had this problem before... ever... in over a decade of using Macs, many years in using USB Overdrive, and over a year of using my Logitech mouse and quite a while using 10.6.5.
The only change that I made before this began happening was to install Portal... but even after not using it for over a week this still occurs.
I have used Snow Leopard Cache Cleaner to delete the cache files and this seems to cure the problem for a day or more.
I haven't been able to narrow it down to any specific app that might be causing the corruption/conflict since it happens so infrequently (once a day makes it hard to narrow it down).
I've done extensive searches on the web for others having similar problems and though I've read that many people have had jumping cursor problems I haven't found anyone with a similar limited/focused area cursor problem.
TIA for any suggestions/references.
Ron

I just thought of one other change that I made just before this began happening... I installed the latest Java update from Apple.

Similar Messages

  • No mouse cursor on one monitor - Windows 7 Boot Camp

    Hello,
    I installed Windows 7, and ran the boot camp installer; however, since then, my mouse cursor does not appear on one of my two monitors. I can still click on things (if I can figure out where my invisible mouse is), but the arrow itself is just gone. This is only the case within Windows; mouse works fine on the Mac end.
    Hardware in question:
    Computer - Mac Pro with NVIDIA GeForce GT 120 graphics card
    Monitor with issue - Hannspree widescreen monitor connected via HDMI cable + HDMI to mini DV adaptor
    Other monitor - hp fullscreen monitor, connected via VGA
    I'm wondering if it has something to do with my NVIDIA drivers on windows, because the mouse shenanigans seemed to start after this step in the Bootcamp installation process.
    Any ideas for how to fix this?
    Thanks very much.

    Then google for Cirrus Logic Audio for Mac running Windows.
    Something like this...
    MacBook Pro audio sound fix 
    http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
    Cirrus Logic CS4206A (AB 11)
    I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
    http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
    *MacBook Pro No Sound in Windows 7*
    Posted by Geek on +Jul 23rd, 2010+
    * You are running Vista or Windows 7 on a Macbook
    * You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
    *Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
    +(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
    +In case the above download link does not work google+ CirrusAudio.10.6.1.zip
    *Step 2:* Extract the right type of Driver
    (depending on your windows XP/ 7/ 32 bit/ 64bit)
    Step3: for Windows 7 only: Right Click on exe file of driver.
    Select Properties> Compatibility > run in compatibility mode
    Select Windows Vista from drop down menu and Click OK
    *Step 4:* Double click the driver and install.

  • Jumping mouse cursor movement with secondary monitor

    Mouse cursor movement is interrrupted or jumps as soon as a secondary monitor is connected to my iMac. Either mouse movement direction is affected. Typically cursor movement stops for about a second while moving mouse further. Then suddenly cusor jumps either forward or backward.
    As soon as secondary monitor is dicsonnected, cursor movement is perfeclty in synch with actual mouse movement.
    I would very much appreciate any hints to solve this issue.
    Thanks
    Ole

    Thanks for your link - read it already yesterday.
    Found after some further search other threads with exactly the same issue - unfortunately not yet solved:
    [Ati 4870 Monitor/Mouse problem|http://discussions.apple.com/thread.jspa?threadID=2130243&start=0&tstar t=0].
    [NEW09 imac External Monitor causes mouse to freeze every 4 sec for half sec |http://discussions.apple.com/thread.jspa?messageID=10832381&#10832381]
    This issue seems to affect various of monitor models.
    My secondary monitor is a Fujuistu Siemens model H19-1, resolution 1280 x 1024 @ 60 Hz, 32-Bit Colors connected via

  • Duplicate mouse cursor appears (but doesn't move) on second monitor

    I have a Mac Pro with the ATI XT1900 video card and 2 Dell 2407WFP LCD monitors attached via DVI.
    When I'm using an application, such as a web browser, and the cursor changes state (like the black arrow with spinning wheel in corner) a duplicate of this cursor state appears on my second monitor, on the left-hand side of the screen.
    This cursor DOES NOT MOVE, but does animate, and will not disappear unless I move my "live" cursor over to the second monitor, which I imagine causes OS X to "refresh" the position of the cursor. It realizes the duplicate shouldn't be there and it vanishes. The second cursor seems to appear only when the primary live cursor changes state, as in the black arrow becoming a black arrow with spinning wheel in the corner, etc.
    This is not a duplicate cursor due to having Displays set up to mirror one another. The second cursor doesn't move.
    This has happened in more than one software application, so it appears to be some sort of display driver error at the system level.
    Anyone else experience this or have a way to fix it? There have been several Apple Updates to OS X since this problem first started happening (on day 1 with the Mac Pro) and it has not been resolved.
    -R

    Try resetting SMC on the macbook air: http://support.apple.com/kb/HT1411
    Good luck!

  • Xorg-server 1.6 - black screen with mouse cursor

    Hi
    First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
    Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
    Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
    When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
    I added a new test user to my system without compiz and get the same.
    I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
    Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
    I googled this problem and was searching similar things in this froum, but I wasn't able to find something
    Here are some files
    xorg.conf (i know there are some bullshit things in it, but it was workig )
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    # Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/local/"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2" # PS/2 Mouse
    Option "Device" "/dev/psaux"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Eizo"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 24.8-80
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "GeForce4"
    # Driver "nv"
    Driver "nvidia"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "GeForce4"
    Monitor "Eizo"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "true"
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Eizo"
    (**) | |-->Device "GeForce4"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
    (--) NVIDIA(0): EIZO L578 (DFP-0)
    (--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GART.
    (II) NVIDIA(0): Setting mode "1280x1024"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
    (**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
    (**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
    (II) saa7134 IR (LifeView FlyVIDEO30: Found keys
    (II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
    (II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Last edited by MueLLe (2009-04-15 21:35:42)

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • How to 'lock' my cursor to one of my two monitors?

    Hello all, thanks for reading my question!
    My 'problem' is the following: I recently started using a second monitor on my iMac [OsX Yosemite - 10.10.2 / i5 - 2,7GHz / 8GB 1600MHz DD3]. The additional monitor is a Samsung 40" Television screen that I have been using with my old Windows PC. My input-devices are the standard wireless keyboard and magic-mouse, and in addition to that I am using a Wacom Graphire4 with Bamboo-drivers since it's not compatible with the latest version of OsX. The only software I installed to streamline this setup is called 'CatchMouse', which I use to center my cursor on either one of my monitors.
    What I would like to be able to do is lock my cursor to either one of my screens, and use my shortcuts to switch between them, without the possibility of my cursor jumping to the next screen as soon as I get too close to the edge of my screen. I have tried to change the alignment of the two screens in the preferences-menu, but that still didn't prevent my cursor from 'jumping' from one screen to the other. Is there a workaround for this, or perhaps additional software?
    The reason I would like to do this is my Wacom, I use it in absolute positioning (meaning that the top-left on my input-device is the top-left on my screen) and the second screen 'sorta' ruins that experience for me..... There's always a chance I am overlooking a very basic setting, apologies in advanced if this turns out to be the easiest thing to do on a Mac besides hitting the Power-button.... Perhaps some of you have the same 'problem' and know a workaround for it, I will of course continue my quest for a solution on the rest of the interwebs and post it here if/when I do find it, but any extra help from here will be greatly appreciated.
    Thanks for now!

    You need to contact Adobe support thru chat and ask them to reset your activations.  I don't believe they work weekends though.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Your license provides for you having two machines with activated installations, so if the lost machine was the only installation then there is nothing keeping you from installing and activating on the laptop.
    As far as downloading CS3 products goes, here are the links I know of for that...
    CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Acer Aspire E3-112 Mouse Cursor Gets Stuck on Screen - Touchpad Unresponsive

    Hi guys. I just bought a Windows 8.1 Acer Aspire E3-112-C6YY from Officeworks a week ago. It was the last one left in any store near me. It's been great so far but just last night when I unplugged my USB mouse, I noticed the touchpad stopped responding and the mouse cursor wouldn't move. My partner pressed Fn + F7 then pressed it again and it started working again and was fine until earlier today. The mouse/touchpad randomly 'gets stuck' and even completely stops working and I have to 'turn it on and off again' with those function keys. Sometimes it doesn't work immediately and is still stuck for a couple of seconds. This is happening every 5 minutes or so now. I'm worried it will stop working all together. The USB mouse doesn't do this so I think it's more of the touchpad itself not responding more than anything else. I'm not sure if this is a software issue as the laptop is brand new and everything should be up to date (I've been installing every new Windows Update that comes along) or if it's a hardware issue - I have Acer 1 year warranty but not sure if there's a simple fix for this rather than getting it sent off as my uni semester starts next week and I need it. I've been treating it gently, I don't leave it on all the time, I haven't dropped it or modified it in any way and I can't really take it back as this was the last model and I really like this laptop. Please help. Thanks

    In this case, you are advised to reinstall touchpad drivers and check if that work. To do this, follow the steps below:
    1. Go to http://us.acer.com/ac/en/US/content/drivers
    2. Type Aspire E3-112 in the box below "Search by Product Model" and click "Search".
    3. Once your product details are displayed on the screen, click "Driver" tab and download the latest touchpad drivers for your model. If you are not aware of which type of touchpad drivers (ELANTECH or Synaptics) you need to install, you are advised to refer to the computer's user manual for details.
    4. Follow on-screen instructions. If the issue still persists, you are advised to take it back to the seller or contact your nearest Acer service center through the following link for further assistance:
    http://us.acer.com/ac/en/US/content/service-contact Hope this will help you.

  • My Mouse Cursor Disappears coming out of standby and screensave​r!!

    I have a TX1000z, with a fresh install of Windows Vista Home Premium 64.  All drivers are current, including the video, networking, mouse, etc.  I am using the xb3000 port replicator with the logitech MX Revolution mouse and a bluetooth wireless keyboard.
    My mouse cursor disappears from the screen, sometimes both the laptop and the monitor (a Dell 22"), sometimes just one or the other.  I can still use the buttons and see different things highlight, but no mouse cursor.  It is not related to Windows Media Center as I have not run that on my laptop yet.  I can reboot and everything is fine, but then it will just disappear again and I cannot keep rebooting!  I have seen this problem posted all over the web, usually in relation to Windows Media Center and the "solution" is always the same...Disable Pointer Trails and "hide cursor while typing."  Neither of these has worked for me.  In fact, when I went in to disable trails, they were already disabled.  Actually, when I clicked on Enable Pointer Trails, the mouse becomes visible.  The mouse is then choppy (even when the trail is very short) and disappears again if I disable pointer trails.
    Here is a link to another post with a very similar problem, but the resolution was not posted (though a suggestion was):
    http://forums.logitech.com/logitech/board/message?​board.id=software_mice&message.id=12940#M12940
    HELP!!

    Still an issue. No fix found for me either.
    Windows Vista 64 sp3. Latest NVidia Video drivers. External Logitech Trackball Marble Wireless. Trails disabled, Hide while typing Disabled.
    Happens when coming out of sleep, screensaver or hibernate. Usually on the primary screen only (dual display). Sometimes on all.

  • Keeping mouse cursor stationary

    HI guys.
    I recently started programming a FPS shooter using JOGL. I've already managed to hide the mouse cursor (otherwise aiming will move the cursor all over the screen). Now in order to register the amount moved by the mouse (must also be able to exceed the desktop),
    I need a constant reference point.
    In C++ it was easy to constantly set the mouse's position, how can I keep the mouse centered?
    Thanx!

    there isn't any built in function like that except basic math. the problem is, like you've already said, the desktop size. the way Maya does it (a 3D modeling program) is that it wraps the mouse around the screen while you move it. Kind of like in Asteroids when your ship leaves one side, it shows up on the other. you can do that part with the Robot class, but you need to keep a variable of how many times the mouse has "wrapped" around the screen on both the x and y axis.
    for example, if the player is getting frantic and keeps moving the mouse left so as to rotate the player around several times, you're going to be wrapping around the x-axis for sure. so have a variable, say `xwrap` which keeps track of how many times the user has looped around the x axis (and is initially set to 0). if the player keeps moving his mouse towards the left, when it comes to the very left, you need to subtract 1 from `xwrap` and place the mouse with Robot to the RIGHT side. so, using pseudo code...
    if (mouse_x <= 0) {
      xwrap--;
      mouse_x = SCREEN_WIDTH+mouse_x;
    }if the situation is the opposite, and the mouse is moving towards the right, you need to increase xwrap when the mouse hits SCREEN_WIDTH
    if (mouse_x >= SCREEN_WIDTH) {
      xwrap++;
      mouse_x = SCREEN_WIDTH-mouse_x;
    }of course, all of this applies to the y-axis in the very same way. up is negative, down is positive.
    now this brings us back to the original point: the offset of the mouse. with your `wrap` variables in place, simple math will save you: (note: CENTER_X is the center x point on the screen. you should manually set the mouse to the center of the screen with the Robot class when the game starts - this will be the reference point)
    offset_x = CENTER_X+SCREEN_WIDTH*xwrap+mouse_x;
    offset_y = CENTER_Y+SCREEN_HEIGHT*ywrap+mouse_y;this code will work fine as long as your player isn't REALLY looping around the screen as often as I was saying (in an average game you probably won't leave the screen more than 3 or 4 times since you typically move the mouse BACK after you move it FORWARD [e.g. he will always want to shoot straight anyway]). if you seriously left the screen 5, 6, or 10 times or whatever, your offset will be HUGE, although it will still be accurate.
    one final note.. this code will only work for ABSOLUTE positioning. what I mean by absolute is that "the reason the character is facing this direction is because this is where the mouse moved from the original point." it won't work for games that constantly keep rotating the player little by little based on how far away the mouse is from the original point.

  • New Install - startx results in blank screen with mouse cursor

    I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
    I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
    I'm not sure what the problem could be...
    Here is my output from 'startx'
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    xinit: connection to X server lost
    waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
    after 554 requests (554 known processed) with 0 events remaining.
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    And my Xorg.0.log
    [ 4955.478]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4955.479] X Protocol Version 11, Revision 0
    [ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
    [ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    [ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    [ 4955.479] Build Date: 05 October 2012 02:01:30PM
    [ 4955.479]
    [ 4955.479] Current version of pixman: 0.26.2
    [ 4955.479] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    [ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4955.480] (==) No Layout section. Using the first Screen section.
    [ 4955.480] (==) No screen section available. Using defaults.
    [ 4955.480] (**) |-->Screen "Default Screen Section" (0)
    [ 4955.480] (**) | |-->Monitor "<default monitor>"
    [ 4955.481] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4955.481] (==) Automatically adding devices
    [ 4955.481] (==) Automatically enabling devices
    [ 4955.481] (==) Automatically adding GPU devices
    [ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4955.481] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4955.481] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4955.481] (II) Loader magic: 0x825a620
    [ 4955.482] (II) Module ABI versions:
    [ 4955.482] X.Org ANSI C Emulation: 0.4
    [ 4955.482] X.Org Video Driver: 13.0
    [ 4955.482] X.Org XInput driver : 18.0
    [ 4955.482] X.Org Server Extension : 7.0
    [ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
    [ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
    [ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4955.486] Initializing built-in extension Generic Event Extension
    [ 4955.486] Initializing built-in extension SHAPE
    [ 4955.486] Initializing built-in extension MIT-SHM
    [ 4955.486] Initializing built-in extension XInputExtension
    [ 4955.486] Initializing built-in extension XTEST
    [ 4955.486] Initializing built-in extension BIG-REQUESTS
    [ 4955.486] Initializing built-in extension SYNC
    [ 4955.487] Initializing built-in extension XKEYBOARD
    [ 4955.487] Initializing built-in extension XC-MISC
    [ 4955.487] Initializing built-in extension SECURITY
    [ 4955.487] Initializing built-in extension XINERAMA
    [ 4955.487] Initializing built-in extension XFIXES
    [ 4955.487] Initializing built-in extension RENDER
    [ 4955.487] Initializing built-in extension RANDR
    [ 4955.487] Initializing built-in extension COMPOSITE
    [ 4955.487] Initializing built-in extension DAMAGE
    [ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4955.487] Initializing built-in extension DOUBLE-BUFFER
    [ 4955.487] Initializing built-in extension RECORD
    [ 4955.487] Initializing built-in extension DPMS
    [ 4955.487] Initializing built-in extension X-Resource
    [ 4955.487] Initializing built-in extension XVideo
    [ 4955.487] Initializing built-in extension XVideo-MotionCompensation
    [ 4955.487] Initializing built-in extension XFree86-VidModeExtension
    [ 4955.487] Initializing built-in extension XFree86-DGA
    [ 4955.487] Initializing built-in extension XFree86-DRI
    [ 4955.487] Initializing built-in extension DRI2
    [ 4955.487] (II) LoadModule: "glx"
    [ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4955.489] (II) Module glx: vendor="X.Org Foundation"
    [ 4955.489] compiled for 1.13.0, module version = 1.0.0
    [ 4955.489] ABI class: X.Org Server Extension, version 7.0
    [ 4955.489] (==) AIGLX enabled
    [ 4955.489] Loading extension GLX
    [ 4955.489] (==) Matched intel as autoconfigured driver 0
    [ 4955.489] (==) Matched intel as autoconfigured driver 1
    [ 4955.489] (==) Matched vesa as autoconfigured driver 2
    [ 4955.489] (==) Matched modesetting as autoconfigured driver 3
    [ 4955.489] (==) Matched fbdev as autoconfigured driver 4
    [ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
    [ 4955.489] (II) LoadModule: "intel"
    [ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4955.491] (II) Module intel: vendor="X.Org Foundation"
    [ 4955.491] compiled for 1.13.0, module version = 2.20.9
    [ 4955.491] Module class: X.Org Video Driver
    [ 4955.491] ABI class: X.Org Video Driver, version 13.0
    [ 4955.491] (II) LoadModule: "vesa"
    [ 4955.491] (WW) Warning, couldn't open module vesa
    [ 4955.491] (II) UnloadModule: "vesa"
    [ 4955.492] (II) Unloading vesa
    [ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 4955.492] (II) LoadModule: "modesetting"
    [ 4955.492] (WW) Warning, couldn't open module modesetting
    [ 4955.492] (II) UnloadModule: "modesetting"
    [ 4955.492] (II) Unloading modesetting
    [ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 4955.493] (II) LoadModule: "fbdev"
    [ 4955.493] (WW) Warning, couldn't open module fbdev
    [ 4955.493] (II) UnloadModule: "fbdev"
    [ 4955.493] (II) Unloading fbdev
    [ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 4955.496] (--) using VT number 7
    [ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
    [ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 4955.509] (==) intel(0): RGB weight 888
    [ 4955.509] (==) intel(0): Default visual is TrueColor
    [ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
    [ 4955.509] (**) intel(0): Relaxed fencing disabled
    [ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
    [ 4955.509] (**) intel(0): Triple buffering? enabled
    [ 4955.509] (**) intel(0): Framebuffer tiled
    [ 4955.510] (**) intel(0): Pixmaps tiled
    [ 4955.510] (**) intel(0): 3D buffers tiled
    [ 4955.510] (**) intel(0): SwapBuffers wait enabled
    [ 4955.510] (==) intel(0): video overlay key set to 0x101fe
    [ 4955.593] (II) intel(0): Output VGA1 has no monitor section
    [ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
    [ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
    [ 4955.676] (II) intel(0): EDID for output VGA1
    [ 4955.677] (II) intel(0): Printing probed modes for output VGA1
    [ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 4955.677] (II) intel(0): EDID for output LVDS1
    [ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 4955.678] (II) intel(0): Output VGA1 connected
    [ 4955.678] (II) intel(0): Output LVDS1 connected
    [ 4955.678] (II) intel(0): Using exact sizes for initial modes
    [ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
    [ 4955.678] (==) intel(0): DPI set to (96, 96)
    [ 4955.678] (II) Loading sub module "fb"
    [ 4955.678] (II) LoadModule: "fb"
    [ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4955.679] (II) Module fb: vendor="X.Org Foundation"
    [ 4955.679] compiled for 1.13.0, module version = 1.0.0
    [ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4955.679] (II) Loading sub module "dri2"
    [ 4955.679] (II) LoadModule: "dri2"
    [ 4955.680] (II) Module "dri2" already built-in
    [ 4955.680] (==) Depth 24 pixmap format is 32 bpp
    [ 4955.680] (II) intel(0): [DRI2] Setup complete
    [ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
    [ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
    [ 4955.680] (II) UXA(0): Driver registered support for the following operations:
    [ 4955.680] (II) solid
    [ 4955.680] (II) copy
    [ 4955.680] (II) composite (RENDER acceleration)
    [ 4955.680] (II) put_image
    [ 4955.680] (II) get_image
    [ 4955.680] (==) intel(0): Backing store disabled
    [ 4955.680] (==) intel(0): Silken mouse enabled
    [ 4955.681] (II) intel(0): Initializing HW Cursor
    [ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4955.684] (==) intel(0): DPMS enabled
    [ 4955.684] (==) intel(0): Intel XvMC decoder disabled
    [ 4955.684] (II) intel(0): Set up overlay video
    [ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
    [ 4955.684] (==) intel(0): hotplug detection: "enabled"
    [ 4955.983] (--) RandR disabled
    [ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 4956.021] (II) AIGLX: Loaded and initialized i915
    [ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
    [ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.124] (II) LoadModule: "evdev"
    [ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
    [ 4956.125] compiled for 1.13.0, module version = 2.7.3
    [ 4956.125] Module class: X.Org XInput Driver
    [ 4956.125] ABI class: X.Org XInput driver, version 18.0
    [ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
    [ 4956.125] (**) Power Button: always reports core events
    [ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 4956.126] (--) evdev: Power Button: Found keys
    [ 4956.126] (II) evdev: Power Button: Configuring as keyboard
    [ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 4956.126] (**) Option "xkb_rules" "evdev"
    [ 4956.126] (**) Option "xkb_model" "evdev"
    [ 4956.126] (**) Option "xkb_layout" "us"
    [ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
    [ 4956.198] (**) Video Bus: always reports core events
    [ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 4956.198] (--) evdev: Video Bus: Found keys
    [ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
    [ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
    [ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 4956.198] (**) Option "xkb_rules" "evdev"
    [ 4956.198] (**) Option "xkb_model" "evdev"
    [ 4956.198] (**) Option "xkb_layout" "us"
    [ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 4956.200] (II) No input driver specified, ignoring this device.
    [ 4956.200] (II) This device may have been added with another device file.
    [ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 4956.202] (**) Sleep Button: always reports core events
    [ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
    [ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 4956.202] (--) evdev: Sleep Button: Found keys
    [ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
    [ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
    [ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 4956.202] (**) Option "xkb_rules" "evdev"
    [ 4956.202] (**) Option "xkb_model" "evdev"
    [ 4956.202] (**) Option "xkb_layout" "us"
    [ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
    [ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 4956.205] (**) Option "xkb_rules" "evdev"
    [ 4956.206] (**) Option "xkb_model" "evdev"
    [ 4956.206] (**) Option "xkb_layout" "us"
    [ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
    [ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
    [ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
    [ 4956.210] (II) No input driver specified, ignoring this device.
    [ 4956.210] (II) This device may have been added with another device file.
    [ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 4956.211] (II) No input driver specified, ignoring this device.
    [ 4956.211] (II) This device may have been added with another device file.
    [ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
    [ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
    [ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
    [ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
    [ 4956.214] (**) Option "xkb_rules" "evdev"
    [ 4956.214] (**) Option "xkb_model" "evdev"
    [ 4956.214] (**) Option "xkb_layout" "us"
    [ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Sleep Button: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Video Bus: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.190] (II) evdev: Power Button: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.192] Server terminated successfully (0). Closing log file.

    karol wrote:
    Leonid.I wrote:@0x001A4:
    To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
    According to his first post he has both xorg-twm and xterm installed.
    I do indeed.
    I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
    I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
    xinit: connection to X server lost
    waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 2326 requests (2323 known processed) with 0 events remaining.
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    .xinitrc for my user
    exec ck-launch-session startlxde
    Very wierd.

  • What causes a slow mouse/cursor response on a fast machine?

    I have a system that has always displayed poor cursor redraw performance with certain adobe applications.   All rendering and other effects are fast, but basic mouse selections and button knobs are extremely unresponsive.   I have searched and searched and can not seem to find out what causes the mouse cursor speed issues.   Does anyone have any ideas as to why my mouse would slow for such basic Interface interactions?    Do I need to change my hardware, settings, displays, BIOS, etc?
    Any insight into what the mouse redraw/refresh is called in terms of computing would help me search for a solution.  And if you have a solution as to why my mouse cursor acts drunk and sluggish when interacting with the Adobe UI's in premiere and after effects and sometimes Photoshop I would greatly appreciate the help.
    Thank You.  I attached a screen shot of a very basic selection interaction that is dog slow.  The selection box redraws like there is a lag in some process associated with the square box overlay.
    Computer Specs
    Windows 7 64
    ASUS Z9PE-d8
    dual xeon
    64 gig ram
    quadro 5000 (driving two 30 inch dell monitors of different models  One DVI-D and the other Display Port)
    512 SSD main drive with windows Swap on 10k Raptor drive.
    *All have been updated and the issue remains for over a year and a half.
    Thank you so much.
    Cliff

    Your answer is in this part of your specs:
    > (driving two 30 inch dell monitors)
    It takes a long time to draw and redraw the pixels to the screen(s) with such large monitors.
    We can mitigate this by making some changes in how our UI is drawn to the screen, and such changes are a rather high priority for use to work on for the near future.

  • Gnome Black Screen with Mouse Cursor after Login

    I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
    The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

    there are a lot of processess running... dunno killing which process will not cause a problem
    here is the xorg log  ( sorry i dont have much knowlegde to analyse it )
    [ 2957.489]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 2957.493] X Protocol Version 11, Revision 0
    [ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
    [ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
    [ 2957.497] Build Date: 21 September 2014 10:53:13AM
    [ 2957.498]
    [ 2957.499] Current version of pixman: 0.32.6
    [ 2957.501] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
    [ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2957.507] (==) No Layout section. Using the first Screen section.
    [ 2957.507] (==) No screen section available. Using defaults.
    [ 2957.507] (**) |-->Screen "Default Screen Section" (0)
    [ 2957.507] (**) | |-->Monitor "<default monitor>"
    [ 2957.507] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2957.507] (==) Automatically adding devices
    [ 2957.507] (==) Automatically enabling devices
    [ 2957.507] (==) Automatically adding GPU devices
    [ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2957.507] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2957.507] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2957.507] (II) Loader magic: 0x818d80
    [ 2957.507] (II) Module ABI versions:
    [ 2957.507] X.Org ANSI C Emulation: 0.4
    [ 2957.507] X.Org Video Driver: 18.0
    [ 2957.507] X.Org XInput driver : 21.0
    [ 2957.507] X.Org Server Extension : 8.0
    [ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
    [ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
    [ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2957.512] (II) LoadModule: "glx"
    [ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2957.514] (II) Module glx: vendor="X.Org Foundation"
    [ 2957.514] compiled for 1.16.1, module version = 1.0.0
    [ 2957.514] ABI class: X.Org Server Extension, version 8.0
    [ 2957.514] (==) AIGLX enabled
    [ 2957.514] (==) Matched intel as autoconfigured driver 0
    [ 2957.514] (==) Matched intel as autoconfigured driver 1
    [ 2957.514] (==) Matched modesetting as autoconfigured driver 2
    [ 2957.514] (==) Matched fbdev as autoconfigured driver 3
    [ 2957.514] (==) Matched vesa as autoconfigured driver 4
    [ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
    [ 2957.514] (II) LoadModule: "intel"
    [ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2957.515] (II) Module intel: vendor="X.Org Foundation"
    [ 2957.515] compiled for 1.16.1, module version = 2.99.916
    [ 2957.515] Module class: X.Org Video Driver
    [ 2957.515] ABI class: X.Org Video Driver, version 18.0
    [ 2957.515] (II) LoadModule: "modesetting"
    [ 2957.515] (WW) Warning, couldn't open module modesetting
    [ 2957.515] (II) UnloadModule: "modesetting"
    [ 2957.515] (II) Unloading modesetting
    [ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "fbdev"
    [ 2957.515] (WW) Warning, couldn't open module fbdev
    [ 2957.515] (II) UnloadModule: "fbdev"
    [ 2957.515] (II) Unloading fbdev
    [ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "vesa"
    [ 2957.515] (WW) Warning, couldn't open module vesa
    [ 2957.515] (II) UnloadModule: "vesa"
    [ 2957.515] (II) Unloading vesa
    [ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 2957.516] (++) using VT number 1
    [ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
    [ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    [ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
    [ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2957.517] (==) intel(0): RGB weight 888
    [ 2957.517] (==) intel(0): Default visual is TrueColor
    [ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
    [ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 2957.517] (II) intel(0): Enabled output LVDS1
    [ 2957.517] (II) intel(0): Output VGA1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VGA1
    [ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output HDMI1
    [ 2957.517] (II) intel(0): Output TV1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output TV1
    [ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VIRTUAL1
    [ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
    [ 2957.517] (==) intel(0): TearFree disabled
    [ 2957.517] (==) intel(0): DPI set to (96, 96)
    [ 2957.517] (II) Loading sub module "dri2"
    [ 2957.517] (II) LoadModule: "dri2"
    [ 2957.517] (II) Module "dri2" already built-in
    [ 2957.517] (II) Loading sub module "present"
    [ 2957.517] (II) LoadModule: "present"
    [ 2957.517] (II) Module "present" already built-in
    [ 2957.517] (==) Depth 24 pixmap format is 32 bpp
    [ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
    [ 2957.518] (==) intel(0): Backing store enabled
    [ 2957.518] (==) intel(0): Silken mouse enabled
    [ 2957.518] (II) intel(0): HW Cursor enabled
    [ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2957.518] (==) intel(0): DPMS enabled
    [ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
    [ 2957.518] (II) intel(0): [DRI2] Setup complete
    [ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
    [ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
    [ 2957.518] (II) intel(0): hardware support for Present enabled
    [ 2957.518] (==) intel(0): display hotplug detection enabled
    [ 2957.518] (--) RandR disabled
    [ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2957.569] (II) AIGLX: Loaded and initialized i965
    [ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
    [ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
    [ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2957.636] (II) LoadModule: "evdev"
    [ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
    [ 2957.637] compiled for 1.16.0, module version = 2.9.0
    [ 2957.637] Module class: X.Org XInput Driver
    [ 2957.637] ABI class: X.Org XInput driver, version 21.0
    [ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
    [ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2957.638] (**) Video Bus: always reports core events
    [ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2957.638] (--) evdev: Video Bus: Found keys
    [ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
    [ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
    [ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 2957.638] (**) Option "xkb_rules" "evdev"
    [ 2957.638] (**) Option "xkb_model" "pc104"
    [ 2957.638] (**) Option "xkb_layout" "us"
    [ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
    [ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
    [ 2957.670] (**) Power Button: always reports core events
    [ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2957.670] (--) evdev: Power Button: Found keys
    [ 2957.670] (II) evdev: Power Button: Configuring as keyboard
    [ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
    [ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2957.670] (**) Option "xkb_rules" "evdev"
    [ 2957.670] (**) Option "xkb_model" "pc104"
    [ 2957.670] (**) Option "xkb_layout" "us"
    [ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2957.671] (II) No input driver specified, ignoring this device.
    [ 2957.671] (II) This device may have been added with another device file.
    [ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
    [ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 2957.672] (**) Sleep Button: always reports core events
    [ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 2957.672] (--) evdev: Sleep Button: Found keys
    [ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
    [ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
    [ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 2957.672] (**) Option "xkb_rules" "evdev"
    [ 2957.672] (**) Option "xkb_model" "pc104"
    [ 2957.672] (**) Option "xkb_layout" "us"
    [ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
    [ 2957.674] (II) No input driver specified, ignoring this device.
    [ 2957.674] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
    [ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2957.675] (**) Option "xkb_rules" "evdev"
    [ 2957.675] (**) Option "xkb_model" "pc104"
    [ 2957.675] (**) Option "xkb_layout" "us"
    [ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
    [ 2957.675] (II) LoadModule: "synaptics"
    [ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2957.676] compiled for 1.16.0, module version = 1.8.1
    [ 2957.676] Module class: X.Org XInput Driver
    [ 2957.676] ABI class: X.Org XInput driver, version 21.0
    [ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
    [ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
    [ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.676] (**) Option "Device" "/dev/input/event11"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
    [ 2957.710] (**) Option "TapButton1" "1"
    [ 2957.710] (**) Option "TapButton2" "2"
    [ 2957.710] (**) Option "TapButton3" "3"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
    [ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
    [ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
    [ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
    [ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
    [ 2957.712] (**) ALPS PS/2 Device: always reports core events
    [ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
    [ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
    [ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
    [ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
    [ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
    [ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
    [ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
    [ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
    [ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
    [ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 2957.714] (**) Dell WMI hotkeys: always reports core events
    [ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
    [ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
    [ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
    [ 2957.714] (**) Option "xkb_rules" "evdev"
    [ 2957.714] (**) Option "xkb_model" "pc104"
    [ 2957.714] (**) Option "xkb_layout" "us"
    [ 2963.887] (II) evdev: Dell WMI hotkeys: Close
    [ 2963.887] (II) UnloadModule: "evdev"
    [ 2963.887] (II) systemd-logind: releasing fd for 13:69
    [ 2963.949] (II) evdev: ALPS PS/2 Device: Close
    [ 2963.950] (II) UnloadModule: "evdev"
    [ 2963.950] (II) systemd-logind: releasing fd for 13:74
    [ 2964.016] (II) UnloadModule: "synaptics"
    [ 2964.016] (II) systemd-logind: releasing fd for 13:75
    [ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2964.070] (II) UnloadModule: "evdev"
    [ 2964.070] (II) systemd-logind: releasing fd for 13:64
    [ 2964.123] (II) evdev: Sleep Button: Close
    [ 2964.123] (II) UnloadModule: "evdev"
    [ 2964.123] (II) systemd-logind: releasing fd for 13:67
    [ 2964.156] (II) evdev: Power Button: Close
    [ 2964.156] (II) UnloadModule: "evdev"
    [ 2964.156] (II) systemd-logind: releasing fd for 13:66
    [ 2964.183] (II) evdev: Video Bus: Close
    [ 2964.183] (II) UnloadModule: "evdev"
    [ 2964.183] (II) systemd-logind: releasing fd for 13:76
    [ 2964.271] (EE) Server terminated successfully (0). Closing log file.

  • New screen standby bug (black screen with mouse cursor)

    It seems there is a new issue with adobe messing up the monitor standby process.
    This time the monitor turns of at the setup time, but after a few minutes turns on again showing a black screen with the mouse cursor in the middle.
    Happens with me if i have any kind of webbrowser running in the background, as soon as i quit the browser my screen stays off again. But with open browser windows it often turns on again and shows the black screen with the mouse cursor.
    Anyone else experiencing this problem?

    I haven't been able to reproduce this.  What makes you suspect Flash Player?  Do you see this behavior if you uninstall the player?  What output do you get if you type the following commands in a command prompt window?
    powercfg -lastwake
    powercfg -devicequery wake_armed
    Thanks,
    Chris

  • Create Cursor from File with big mouse cursor

    Hi All,
    I'd like to change the mouse cursor to a picture (.cur file) and back to normal again.
    With the LabView vi "Create Cursor from File" and "set cursor" VIs it works, but the cursor is limited to 16x16 pixels (it will be shrinked if I load a biger .cur file).
    Alternatively I tried to use the windows api to set the cursor (according to the example in Thread ) .
    Setting the cursor to a biger size works now, but I'm not able to set the cursor back to normal again.
    It seems to me, that the labview behaviour is overuled by the windows api.
    Soes somebody know how to store the current cursor behaviour and reset it after I changed the cursor?
    thank you
    Mario Hirth
    Attachments:
    set_cursor_demo_8.2.vi ‏28 KB

    Hi Mario,
    I attached you an example which worked the way you want, I guess. It's saved with LabVIEW 8.6. Copy the coursor file cross_i.cur to a location you want and change the path to that location or copy it to C: and leave the path in the path control.
    Regards.
    TomBaum
    Attachments:
    example.zip ‏15 KB

  • Xorg: blank screen, mouse cursor only - ATI Radeon HD3450

    Last friday, my old Nvidia card died (overheated, I think). I got a replacement today: an ATI HD3450 card by Asus (R600 series). This is an old PC with an AGP slot, so my options were unfortunately limited. I was looking for a Nvidia replacement originally, to avoid having to reconfigure stuff, but that turned out to be too hard. So I got an ATI card instead. I regret this decision now... it works fine in console mode, but I can't get it to work in X.
    I've tried radeon and radeonhd drivers. I'm reluctant to try catalyst, seeing as they do not support the current kernel version (2.6.32) and I don't want to downgrade.
    radeonhd (xf86-video-radeonhd) is just a disaster. When I try to start X, all I see is a screen which is mostly black, except for a garbled band of about 1/4th the screen height, mostly white with some random colours thrown in.
    radeon (xf86-video-ati) doesn't work either. When X starts, all I see is the mouse cursor. And nothing else. Just a black screen with a mouse cursor. The funny thing is, it's all there, I just can't see it. When I tried "startxfce4", the cursor would change shapes when it was over window edges or text boxes. But they were invisible. Too bad.
    When I run "startx" as root, I see a couple of twm windows (the default configuration, I normally don't use X as root), and I can interact with them, but it's as if the screen isn't refreshed properly. When I move a window, it isn't redrawn, but it was definitely moved, because when I enter text in it, the text appears at the new position. The 'vesa' driver works, but I can't use that for obvious reasons.
    I have read the wiki article about ATI drivers and tried some of the things mentioned there (no xorg.conf, simple xorg.conf with some combinations of the sections mentioned, ...). I'm pretty sure the problem isn't KMS-related, because it's disabled by default with the 2.6.32 kernel.
    What pisses me off the most is that I get no error messages whatsoever, so I haven't a clue what could be the problem. I'm working on getting some Xorg.0.log output in this thread ASAP.
    Anybody have any idea what could cause this? I would really like to get this working soon. It would kinda suck if it turns out I've replaced an unusable graphics card with another unusable graphics card.
    If the radeonhd problem is easier to solve, then solutions for that are welcome as well. I just need a working driver that can handle compiz, and doesn't require me to downgrade my kernel.
    EDIT: Xorg.0.log contents, enjoy!
    X.Org X Server 1.7.5
    Release Date: 2010-02-16
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux arch 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 14:46:08 UTC 2010 i686
    Kernel command line: root=/dev/sda6 ro vga=838 radeon.modeset=0
    Build Date: 17 February 2010 07:52:42PM
    Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 2 17:45:35 2010
    (II) Loader magic: 0x81e4ca0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:95c6:1043:0028 ATI Technologies Inc RV620 LE AGP [Radeon HD 3450] rev 0, Mem @ 0xe0000000/268435456, 0xf9000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default ati Device 0"
    Driver "ati"
    EndSection
    Section "Screen"
    Identifier "Builtin Default ati Screen 0"
    Device "Builtin Default ati Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default ati Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI RS880
    (II) Primary Device is: PCI 01@00:00:0
    (II) RADEON(0): TOTO SAYS 00000000f9000000
    (II) RADEON(0): MMIO registers at 0x00000000f9000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon HD 3450" (ChipID = 0x95c6)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x0028
    IOBaseAddress: 0x9000
    Filename: SV31552.bin
    BIOS Bootup Message:
    95C6.10.88.0.19.AS02
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 600000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will not try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling disabled
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 600.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
    Shared DDC line: 0 3
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output HDMI-0 has no monitor section
    (II) RADEON(0): I2C bus "HDMI-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: HDMI-0
    Connector: HDMI-A
    DFP1: INTERNAL_UNIPHY
    DDC reg: 0x7e60
    (II) RADEON(0): Port2:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP2: INTERNAL_KLDSCP_LVTMA
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
    (II) RADEON(0): Year: 2007 Week: 26
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing not preferred mode in violation of standard!
    (II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
    (II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x864@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
    (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    (II) RADEON(0): Serial No: 00673
    (II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEON(0): Monitor name: H-W22 DVI
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0005232300a1020000
    (II) RADEON(0): 1a110103802f1e78e837a0a655489a26
    (II) RADEON(0): 125054bfef808140818081c09500950f
    (II) RADEON(0): b300010101017c2e90a0601a1e403020
    (II) RADEON(0): 3600d62c1100001a000000ff00303036
    (II) RADEON(0): 37330a20202020202020000000fd0037
    (II) RADEON(0): 4b18530f000a202020202020000000fc
    (II) RADEON(0): 00482d573232204456490a2020200061
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
    (II) RADEON(0): Year: 2007 Week: 26
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing not preferred mode in violation of standard!
    (II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
    (II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x864@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
    (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    (II) RADEON(0): Serial No: 00673
    (II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEON(0): Monitor name: H-W22 DVI
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0005232300a1020000
    (II) RADEON(0): 1a110103802f1e78e837a0a655489a26
    (II) RADEON(0): 125054bfef808140818081c09500950f
    (II) RADEON(0): b300010101017c2e90a0601a1e403020
    (II) RADEON(0): 3600d62c1100001a000000ff00303036
    (II) RADEON(0): 37330a20202020202020000000fd0037
    (II) RADEON(0): 4b18530f000a202020202020000000fc
    (II) RADEON(0): 00482d573232204456490a2020200061
    (II) RADEON(0): Panel infos found from DDC detailed: 1680x1050
    (II) RADEON(0): EDID vendor "AIC", prod id 35
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output HDMI-0 disconnected
    (II) RADEON(0): Output DVI-0 connected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
    (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules/libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    mc fb loc is 00ff00e0
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x20000000
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Allocating from a screen of 262144 kb
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00b7c000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00b80000
    (II) RADEON(0): Will use 11760 kb for front buffer at offset 0x00000000
    (II) RADEON(0): Will use 11760 kb for back buffer at offset 0x00b84000
    (II) RADEON(0): Will use 11760 kb for depth buffer at offset 0x01700000
    (II) RADEON(0): Will use 112640 kb for textures at offset 0x0227c000
    (II) RADEON(0): Will use 114192 kb for X Server offscreen at offset 0x0907c000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x00e1; Card 0x1002/0x95c6 0x1043/0x0028]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xf0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb712c000
    (II) RADEON(0): [agp] ring read ptr handle = 0xf0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb72fb000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xf0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6ebd000
    (II) RADEON(0): [agp] GART texture map handle = 0xf0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xa523d000
    (II) RADEON(0): [drm] register handle = 0x2f200000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0x00ff00e0 is: 0x00ff00e0
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x0000de00
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Setting EXA maxPitchBytes
    (II) EXA(0): Offscreen pixmap area of 116932608 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (II) RADEON(0): Acceleration enabled
    (==) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Mode 1680x1050 - 1840 1080 9
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    freq: 119000000
    best_freq: 119000000
    best_feedback_div: 119
    best_ref_div: 3
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
    (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Output DIG2 encoder setup success
    Output DIG2 encoder setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 disable success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Mode 1680x1050 - 1840 1080 9
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    freq: 119000000
    best_freq: 119000000
    best_feedback_div: 119
    best_ref_div: 3
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
    (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Output DIG2 encoder setup success
    Output DIG2 encoder setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 444 x 277
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS2++ Logitech MX Mouse
    (**) PS2++ Logitech MX Mouse: always reports core events
    (**) PS2++ Logitech MX Mouse: Device: "/dev/input/event4"
    (II) PS2++ Logitech MX Mouse: Found 12 mouse buttons
    (II) PS2++ Logitech MX Mouse: Found scroll wheel(s)
    (II) PS2++ Logitech MX Mouse: Found relative axes
    (II) PS2++ Logitech MX Mouse: Found x and y relative axes
    (II) PS2++ Logitech MX Mouse: Configuring as mouse
    (**) PS2++ Logitech MX Mouse: YAxisMapping: buttons 4 and 5
    (**) PS2++ Logitech MX Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS2++ Logitech MX Mouse" (type: MOUSE)
    (**) PS2++ Logitech MX Mouse: (accel) keeping acceleration scheme 1
    (**) PS2++ Logitech MX Mouse: (accel) acceleration profile 0
    (II) PS2++ Logitech MX Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
    (II) RADEON(0): avivo_restore !
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Another update: the card seems to work just fine under windows, so it is definitely a configuration or driver issue.
    Last edited by Sander (2010-03-02 17:12:40)

    "Enabling KMS will make Xorg fall back to software rasterizing, at the cost of 3D performance. " <- is this still true at the moment? In that case, enabling KMS really isn't the solution I'm looking for. Back to square one
    This is not true.  Software rasterization indicates that KMS was not set up correctly.  You will get 3D acceleration with KMS correctly configured.
    Thanks for taking the time to reply
    I'll give enabling KMS a try. What thread is it that you're talking about? Also should I follow the "early start" or "late start" instructions?
    EDIT: I'm guessing you mean this one? http://bbs.archlinux.org/viewtopic.php?pid=613720
    That thread is the one I meant. 
    Your xf86-video-ati doesn't have support for KMS - you have to rebuild it against libdrm_radeon. This also means that you have to rebuild mesa against same new libdrm because mesa doesn't have KMS support without libdrm_radeon either.
    Is this information applicable to my situation? No instructions on how to do this are provided, so I have no idea how to try it, or if it's worth trying at all.
    Yes, this is a problem.  You have to modify a PKGBUILD or two and build/install the packages in the correct order.  I detail the right way to do everything below.
    I used the following packages:
    * kernel26-git: http://aur.archlinux.org/packages.php?ID=25304 (you must configure with CONFIG_DRM_RADEON=m. CONFIG_DRM_RADEON_KMS=y enables KMS by default.  you should be presented with a configuration menu when the package builds.  type '/' to search.)
    * kernel26-firmware-git: http://aur.archlinux.org/packages.php?ID=25782
    * radeon_ucode: http://aur.archlinux.org/packages.php?ID=33016
    * libdrm-git: http://aur.archlinux.org/packages.php?ID=10254 (you must edit the PKGBUILD to enable radeon support, see below)
    * glproto-git: http://aur.archlinux.org/packages.php?ID=18964
    * dri2proto-git: http://aur.archlinux.org/packages.php?ID=19051
    * libgl-git: http://aur.archlinux.org/packages.php?ID=19044 (this is out of date and requires a patch.  see my comment on the AUR page)
    * mesa-git: http://aur.archlinux.org/packages.php?ID=8266 (you can reuse src/mesa from libgl-git, it clones the same repository)
    * xf86-video-ati-git: http://aur.archlinux.org/packages.php?ID=15374 (you can reuse src/mesa from libgl-git)
    libdrm-git PKGBUILD:
    sh autogen.sh --prefix=/usr \
    --enable-nouveau-experimental-api \
    --enable-udev || return 1
    # --enable-radeon-experimental-api
    libdrm-git PKGBUILD modified:
    sh autogen.sh --prefix=/usr \
    --enable-radeon-experimental-api \
    --enable-udev || return 1
    Install those packages in that order and add yourself to the video group.  Make sure that your grub configuration has an option to select the new kernel.  Also make sure all of your PKGBUILDs from AUR are up to date.  A week or two ago they were all wrong (as a noted above, one of them is still wrong and requires a patch).
    I hope that helps.  Eventually Arch will support KMS for radeon by default, but the driver and the kernel need to go through another release or two.
    Last edited by tss (2010-03-02 20:34:52)

Maybe you are looking for