Mouse dead after leaving pc on overnight

I just got my first "root partition is full" warning, and read that pacman -Scc would clean it up. It did! THEN I read that you shouldn't use the -Scc, that -Sc is as far as you want to go. Seems like that happens to me a lot.
All seemed to go well, everything worked, so I though "No problem." now, well, I have a problem. After leaving the computer on overnight, my mouse is dead. It's a usb, generic mouse. It uses an led to show that it's powered up, and when I check it after setting for a few hours, the light isn't on. It comes on as soon as the bios loads, so I'm surprised that Arch even affects it, but I think the mouse is connected to the X window process. Google didn't give me any clue, and searching the forum drew a blank (for me, anyways). Searching for "mouse" in the wiki didn't work, either. I guess I could just shut it down and restart it, but I'd like to be able to let it sit overnight. Any idea what I broke?

I have what I'd call a "standard" install, as I've had Arch working for perhaps 5 or 6 months now. I haven't altered anything from the net install, as far as I remember.
After posting the problem, I let my computer "sit," and watched it to see what happened. The screen goes dark after maybe 15 minutes (screensaver, I suppose) and the mouse light stayed on. Then, after maybe another 25 minutes, something must send a shutdown signal to the system. The mouse light went off, but what alerted me was the speakers making a popping noise, like I had unplugged them. So it's a shutdown issue, with the mouse and probably all of Xorg going down, but the computer stays on.

Similar Messages

My iPhone 4 is unable to backup after I had the IOS upgraded to 4.3.5 ver. In iTunes, backup progress shown in initial progress even leaving it on overnight. What shd be done to normalize the backup process? SOS

My iPhone 4 is unable to backup after I had the IOS upgraded to 4.3.5 ver. In iTunes, backup progress shown in initial progress even leaving it on overnight. What shd be done to normalize the backup process?
iTunes for my PC was also updated to the latest.
.... SOS

You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, particularly before any update or restore.
You should also be syncing your contacts to your computer regularly. They hsould be in whatever program/service that you have selected to sync.
If you have failed to do this, then they are very likely gone.
You can try restoring from backup.

My wireless mouse disconnects after a long sleep, and only rebooting machine makes it come back.

My wireless mouse disconnects after a long sleep time, always overnight, and pushing buttons, replacing batteries, etc. doesn't wake it up again. I have to reboot the machine, sometimes losing data, in order to make it work again. I am kinda new to mac, so hopefully I am just missing something easy.

Maybe something here will help:
https://discussions.apple.com/message/15090955#15090955
Regards,
Captfred

Bluetooth-dead after coming out of sleep-have to shutdown/back on with switch-then all is normal again-help please

Intel iMac-bluetooth seems dead after sleep. Screen will come on after pushing power button, but wireless keyboard, trackpad, and mouse are dead. Shutdown using power button, push again to turn back on and all is back to normal...any idea what is going on?

There's a long thread here about this problem (and I think I've seen several others):
https://discussions.apple.com/thread/2223188?start=345&tstart=0
Seemed to start as a Snow Leopard issue but seems to have morphed into a Lion problem for some.
I have experienced the problem myself since updating to Lion, although only a couple of times. My workround is to set computer sleep to 'never'. Hoping that 10.7.2 will address the problem whenever it is released.

Left USB-Port dead after wake from sleep. Just restart helps.

I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
I'm really angry now.
When will Apple solve the most urgent problems in Leopard?
Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
Come on already Apple. This is a SERIOUS, SERIOUS problem.
Fix it.

Ipad dead after update software

On Sunday I did the update as suggested from the ipad. The ipad when stopped updated showed a blue screen, than the battery was down and after leaving the battery to get recovered my ipad seems to be dead, nothing is happening and the screen is black.

Try the information found in this link;
http://support.apple.com/kb/TS3281

USB mouse freezes after wake from sleep.

Since the 10.8.2 update my Logitech USB mouse freezes after waking up the computer from sleep or when it goes into energy save from non use. This also happens to my brand new MBPR. I tries repair permissions and reset the smc. Any suggestions?

I get a frozen mouse (Microsoft Intellimouse Optical) on my 2012 Mac Mini running Mavericks (it did it with Mountain Lion also) when waking from sleep about 75% of the time which works again if I unplug/replug it (light is on and mouse buttons work when it's frozen, but the pointer won't move). It does this whether I use a built-in USB3 port, a USB2 hub and now also with my new USB3 hub.
However, my 2008 Macbook Pro also has an Intellimouse connected to it when docked and it NEVER freezes when waking from sleep whether using the built-in USB2 port or a Gmyle USB3 card port. Either way, the mouse wakes fine and it's the SAME MODEL MOUSE and SAME OSX verison. I have no idea why the inconsistency. It ***** because "Wake on Network Activity" FINALLY works right here in Mavericks with XBMC on my Mac Mini so there's a perfect opportunity to save some electricity. I got excited when it woke up two times in a row with 10.9.1 and set up my sleep controls only to find it wouldn't go to sleep with the Energy Savings menu because I have an external USB3.0 3TB media drive connected (at all times). I finally found out (through more patient testing) that once the drive spun down (possibly on its own power saving timer as I'm not sure the "Shut down hard drives when possible" setting works in Mavericks; it was messed up in Mountain Lion in 10.8.4 and even though 10.8.5 fixed it, I'm not sure Mavericks is using the same code. It doesn't seem to shut down any faster with or without the setting on and shuts off several minutes after the computer attempts to go to sleep (on a 1 minute test setting; I think WD defaults to 10 minutes in firmware).
Anyway, once that was resolved and I saw it would go to sleep eventually once the drive spun down (it will sleep instantly if I select SLEEP from the Apple menu which I find odd if it's such a big deal that it's connected....), I thought OH BOY! I'm all set. Then I woke it from that sleep and found my mouse was frozen again..... :-( What a PITA to unplug/plug the mouse every time it wakes from sleep. It's not worth it. I'll just have to pay the extra few bucks in electricity each month I could have saved to avoid such a freaking nightmare hassle. Why on God's Green Earth, Apple CANNOT or WILL NOT fix their darn energy savings features is just beyond me. Instead of spending all their time making horrible horrible ugly icon/GUI updates to iOS and making it slower and slower and slower, why don't they actually fix some darn bugs in OSX for once in their lives.... I'm starting to think I should give Windows another chance I'm so annoyed right now. But then I think about having to run a malware program and have that program update and Windows software/security updates 3x a day and I think I can just deal with the Mini not sleeping.....
I'd like to know why Apple couldn't figure out those of us with multiple monitors would want a dock on BOTH monitors all the time either (first side-mount docks wouldn't migrate and now in 10.9.1, bottom-mounted docks won't migrate here either, leaving a dock on one monitor all the time and if that's the monitor that is showing full-screen video, you lost your dock completely while the video is playing. They finally figured out after a full decade that having a menu bar on both screens would be a good idea, but it just didn't occur to them that the same is true of the dock. How much are they paying these guys? Too much apparently (or is it too little to attract talented thinkers? Nah, it couldn't be since we give them feedback and they just ignore it).

Satellite L670 - Hard Disk Dead after 8 months only

Hi,
this morning I had to retunr my laptop due to bad hard disk problem. After 8 months, it's dead already.
The positive points are: I am still under warranty and second the toshiba software hilighted me on time, allowing me to back up my data before the crash. Tks Toshiba for this tool, very usefull.
The question is, how can a hard disk die that quick after just fews months ?
Bad luck or bad use ? I am wondering.
I wish to have a feedback from those who owns same model, L670 (windows 7), to understand if this problem is commun or if I was unluckily concerned.
Also, if there are possible solutions to avoid HD stress in the daily use ? Like for example, reduce writing on it (back up of blu-ray using AnyDvD HD ON hd, then cut&paste to external HD), or to not connect too often external hard disk to avoid electricity surcharge if any ?
In future, will I have to perform chkdsk more often ? Defrag ? If yes, at which frequency ?
This is my 3rd laptop dying, Sony VAIO = mothercard dead after 1.2 years, Fujitsu Amilo xi = explosed after 3 years, and now Toshiba HD after 8 months.
From 900EUR up to 1600EUR, I do not see a significative resistance of one of those models, Sony was the badest ever in terms of video card longevity and compatibility (games unplayable after 2 months, no driver update), keyboard "painting" was a mess with deterioration after fews months compared to Fujitsu and Toshiba (no pb). Toshiba L670 more recent, was the best in terms of game compatibility.
What to do ? Stop buying laptop or use it only fews hours a day with a PC on top ?
For time beeing I can't afford to have a PC + a laptop as I am unemployed, surviving with 10EUR/day,
time to find a job again.
Despite this situation, I managed to buy new Zelman notebook cooler for my Toshiba at around 40/50EUR, but, it didn't help apparently.
Tks for feedback about L670 duration life, and particulary HD problem + best use to protect it.
Guillaume

You're not the only one.
I bought an L670 in September last year. It was strictly for home use as replacement for a desktop PC, so it was never moved.
Just after a few weeks things started to go wrong: boot fails, programs crashing, Windows 7 crashing...
It's almost 7 months now since purchase and I'm writing this message on the very same notebook with 'Hard Disk Sentinel' running in the background, reporting more bad sectors every day. It tells me that hard disk health is now down to only 9% and that it has an estimated 14 days to live.
Since the notebook is technically still running fine, I don't think I can have the HDD replaced under warranty or am I wrong? Does the HDD have to cease working alltogether before I can have it replaced under warranty?

Mid-2010 battery dead after 629 cycles?!?

Hi,
My mid-2010 Macbook Pro 15" battery is seemingly dead after only 629 cycles. It says that the condition is "replace now" and the green indicator lights flash when I press the button on the side. It was working fine, and then I didn't use the computer for a little while, and now the battery doesn't charge and it has to be plugged in.
I'm hesitant to think the battery has just failed, because like I mentioned, there are only 629 cycles on it, and it was working prefectly before, and it seems very sudden.
Any help/thoughts/suggestions are appreciated!
Thanks!

Make an appointment at the genius bar. Have you fully discharged and recharge fully over the battery's 2 yr life? This is good to do a few times a year.
http://www.apple.com/support/macbookpro/service/battery/ shows the cost of replacing your battery.

Hp Pavilion 23 Blank Screen With Mouse Cursor After Hp Logo (Not Windows Logo)

Hello my computer wont start up all i get is a black screen but i have a mouse cursor. after a little bit the computer will restart and do a automatic repair but nothing happens it just keeps on rebooting. i tired to do a bio update but it seems to not be working. there is no option in the bios to update or even in UEFI. i also did a harddrive test and got a Short DST Check fail (FAILURE ID: 909HVX-0007K0-WPU2XF-60WH03) but i still can get access to the harddrive using a Linux LiveUSB and all files are there. (Product Number Is : H5P60AAR#ABA)

It is possible to receive a false DST check but not common.
It doesn't mean your hard has failed but that it is in imminent danger of failing.
You can try again but this time using the Extended DST test.
But before doing anything I suggest you back up all your important data using that live Linux boot disk just in case.
Every hard disk manufacturer has their own diagnostic boot cd/usb. Google it.
You should create one and run it for your brand hard drive.
You should be able to determine which brand you have from the BIOS/UEFI hardware tab.
While your'e in there double check that your boot priority is set to hard drive first.
Your other issue seems to be the dreaded 'Automatic Repair Loop' which could be caused by your possibly failing hard dirve. I would fully diagnose the hard drive first.
Here's a link with several suggested fixes. Some of them require a Windows 8 boot disk, other do not.
Automatic Repair Loop Fixes
If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody same..

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....

Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/

Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

Why does my iPhone 5 battery runs dead after only 5 hours in standby?

My brand new iPhone 5 runds completely dead after only 5 hours standby.
I might have done 2 or 3 calls, I switched off all the apps that are running in the background.
Wifi and bluetooth are on, and should stay on.
My old iPhone4 could work almost 2 days without recharging....
I have looked at different blogs and websites and set most of those tips and tricks, but without success... my phone is 1 day old and already synced....
Is there something big that I'm overlooking?

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
also recalibrate the battery, let if fully drain to where your phone shuts off and then fully charge it without using it.

KT6V 7021 - OnBoard NIC "dead" after BIOS 2.00 update ... any thoughts?

Hi!
Just flashed KT6V BIOS 2.00 and now my onboard nic suddenly stopped working.
The network adapter gets recognized by Windows as usual, but although I do get a dhcp lease from my server I'm unable to connect to any share on it. It's also impossible to surf the web or to simply ping any local/remote host. If I try to connect to the system from any other workstation on the lan it doesn't work either.
The network status only shows a great amount of sent packages - caused by AVAST! as it tries to look for an update on boot - but only "0" received.
I flashed the BIOS from the emergency diskette and did a CMOS clear (Jumper) afterwards. And yes, I did disconnect my PSU from the wall socket.
Since I need network access to the system I tried stepping back to BIOS 1.90 but with no avail - the onboard nic doesn't receive a single paket after it has got it's dhcp lease.
Any clue what might be wrong and how I'm able to get my nic back to work?
Thank you in advance for any useful help.

Hi Fredrik.
Quote
So if you were to downgrade BIOS problems would go away, right?
I have already downgraded to BIOS 1.90 and the problem stayed the same - the onboard nic is still dead beef.
Quote
When clearing CMOS there can be no el. left in your system, so unplug power cable etc.
As mentioned in my first post I _have_ unplugged the power cord from the wall socket.
Quote
If the new BIOS would affect NIC card... Hm, it is hard to see quite how.
I can't think of any reason either, however, the nic went dead after updating to BIOS v2.00. I assume that there must be some kind of "network code" inside the bios which has to do with the onboard nic - otherwise I'm unable to explain why the MAC address suddenly changed to "11:22:33:44:55:66". If I would only have a clue on how to access and/or flash the nic ... ???
Quote
Is there any error marks for the nic in say Device Manager, if you get that far?
Nope, there is no question or exclamation mark on the network card in the device manager. Windows thinks the card is working, but in reality it isn't. As already stated: No traffic from/to the network.

Mouse dead after leaving pc on overnight

Similar Messages

Maybe you are looking for