Mouse down help
Im trying to create a program so that when the next button is pressed, the gui then reads the next line on my excel sheet for the standard. Im having trouble with the mouse my down functioin for this.
Attachments:
Intensity4.vi 181 KB
Please show us where excel and file IO happens. I cannot find it.
Your VI is full of race conditions and very convoluted code.
To get one row of a 2D array, reshaping it to a 1D array with the lenght of one row seems pointless. All you need is "index array" with one index disconnected.
You have a case structure with the same property nodes in all case frames, thus they belong after the case, only on instance needed each.
There are plenty of potential race conditions. For example the boolean "standard" is read (via value property) and written in parallel elsewhere to the terminal.
How do you know what happens first?
Getting a scalar from an array does not need a detour via dynamic data ("Numeric", after the small FOR loop). try
index array"
In the "next: mouse down" event, all you need in the second frame is the "menu" local variable. wire it to the output if the +1 from the previous frame.
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
I'm experiencing frequent (every 11 minutes or so) mouse-down errors. As this occurs in any variety of apps, including the Finder, the application in-use seems to not be a factor.
I will be using an application and suddenly the track-pad no longer works. This is will last for between one and three minutes. Sometimes, the front-most window will veer suddenly to the left so that it is halfway off the screen. I will be unable to move it until the mouse-down error ends. Most of the time, I can continue to move the mouse around during these events, but I can't click on or move anything. Sometimes, gestures (like 4 finger push up to reveal Mission Control) will be disabled during these events, but not always. During these events, I am also unable to drag and drop any files from one space to another.
This is extremely frustrating and very disruptive to my work and I would really appreciate any help in resolving this.
The problem began a week or so ago after I installed more than a dozen applications; I have experimented with quitting one menulet at a time with no results. It seems to me, since the error is occurring on a fairly regular basis that one background process or another is causing it so the offending app would need to be fully uninstalled, not just quit anyway.
I'm wondering, at this point, if I should just restore from a two week old backup, but I would really like to avoid that hassle if it's possible to simple identify the offending process.
These are some of the console logs of mouse-downs:
This is the most recent EtreCheck report:
EtreCheck version: 1.9.15 (52)
Report generated 23, August, 2014 11:45:28 AM EDT
Hardware Information: ?
Mac mini Server (Late 2012) (Verified)
Mac mini - model: Macmini6,2
1 2.6 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: 768 MB
E2350 1920 x 1080 @ 60 Hz
System Software: ?
OS X 10.8.5 (12F45) - Uptime: 1 day 13:45:29
Disk Information: ?
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
⨀ (disk0s2) / [Startup]: 250.14 GB (72.26 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
APPLE SSD SM256E disk1 : (251 GB)
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted>: 209.7 MB
☾ (disk1s2) /Volumes/☾: 250.66 GB (250.34 GB free)
USB Information: ?
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1144 4 TB
S.M.A.R.T. Status: Verified
disk7s1 (disk7s1) <not mounted>: 209.7 MB
⠍⠑⠙⠊⠁∞ (disk7s2) /Volumes/⠍⠑⠙⠊⠁∞: 4 TB (695.3 GB free)
Western Digital My Book 1144 4 TB
S.M.A.R.T. Status: Verified
disk6s1 (disk6s1) <not mounted>: 209.7 MB
⠍⠑⠙⠊⠁ (disk6s2) /Volumes/⠍⠑⠙⠊⠁: 4 TB (1.17 TB free)
Western Digital My Book 1144 2 TB
S.M.A.R.T. Status: Verified
disk5s1 (disk5s1) <not mounted>: 209.7 MB
♾ ∞ (disk5s2) /Volumes/♾ ∞: 2 TB (823.76 GB free)
Western Digital My Book 1144 2 TB
S.M.A.R.T. Status: Verified
disk4s1 (disk4s1) <not mounted>: 209.7 MB
♾ (disk4s2) /Volumes/♾: 2 TB (826.78 GB free)
VIA Labs, Inc. USB3.0 Hub
Wacom Co.,Ltd. Intuos5 touch L
Audioengine Audioengine 2+
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Firewire Information: ?
LaCie Group SA LaCie DVD MULTI Drive 400mbit - 400mbit max
WD My Book 111D 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk3s1 (disk3s1) <not mounted>: 209.7 MB
⨀ ☾ ∞ (disk3s2) /Volumes/⨀ ☾ ∞: 999.83 GB (310.49 GB free)
WD My Book 111D 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted>: 32 KB
Djuna (disk2s3) /Volumes/Djuna: 2 TB (467.22 GB free)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Configuration files: ?
/etc/hosts - Count: 21
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) Support
[loaded] com.cleancutcode.displaypaddriver (14 - SDK 10.7) Support
[loaded] com.cleancutcode.displaypadframebuffer (14 - SDK 10.7) Support
[loaded] com.dvdfab.kext.fabio (1) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[loaded] com.makemkv.kext.daspi (1) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.6 - SDK 10.8) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
Startup Items: ?
ProTec6b: Path: /Library/StartupItems/ProTec6b
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.bombich.ccc.scheduledtask.17F56F48-3C2C-4D3B-B47E-205306ACCFDB.plist Support
[not loaded] com.bombich.ccc.scheduledtask.2D2A146C-2C9A-49C3-AB42-CC8739EB950B.plist Support
[not loaded] com.bombich.ccc.scheduledtask.5E0B2858-77D7-4B7F-9CFF-200039E53FA9.plist Support
[running] com.bombich.ccc.scheduledtask.5FDB8E27-273B-485D-AC72-217F3FD8119B.plist Support
[running] com.bombich.ccc.scheduledtask.65FB7ACA-8A91-47EC-AC2F-348EE1CE3AC4.plist Support
[running] com.bombich.ccc.scheduledtask.D8145D25-190A-44BF-BB03-CF94E6D9ADD7.plist Support
[loaded] com.cyberghostsrl.CyberghostPrivilegedHelper.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.github.GitHub.GHInstallCLI.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.informer.mac.daemon.plist Support
[loaded] com.JWVD.cbcache.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.robohippo.HippoConnectDaemon.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.wdc.WDDMservice.plist Support
[running] com.wdc.WDSmartWareServer.plist Support
[loaded] net.interacto.flavours.helper.plist Support
[running] org.glimmerblocker.proxy.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
[not loaded] org.virtualbox.startup.plist Support
[loaded] org.wireshark.ChmodBPF.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.robohippo.HippoConnectAgent.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[running] com.wacom.wacomtablet.plist Support
[failed] net.culater.SIMBL.Agent.plist Support
[loaded] org.glimmerblocker.updater.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.adobe.ARM.[...].plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[running] com.bombich.ccc-user-agent.plist Support
[running] com.nchsoftware.expressinvoice.agent.plist Support
[running] com.nchsoftware.inventoria.agent.plist Support
[loaded] com.nchsoftware.switch.schedule.LikeSurvey.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[loaded] uk.co.markallan.clamxav.clamscan.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ?
CheatSheet
handyPrintDaemon
iTunesHelper
iTunes
Degrees
Calendar
Wunderlist
Mint QuickView
Mail Call
Plex Media Server
Dropbox
DeskConnect
CloudClip Manager
Converto
Brightness Slider
ByteController
Moom
App for Facebook
Cobook
Numi 2
SnappyApp
TotalFinder
XtraFinder
Internet Plug-ins: ?
DirectorShockwave: Version: 12.0.5r146 - SDK 10.6 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
OVSHelper: Version: 1.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.1
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
Safari Extensions: ?
myPlex Queue-2
AdBlock
DuckDuckGo
Save to Pocket
LinkThing
Deanimator
Harakirimail
dotepub
ClickToFlash
JavaScript Blocker-2 (Disabled)
FeedButton
1Password
Audio Plug-ins: ?
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
InstantOn: Version: 8.0.0 - SDK 10.8 Support
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
RealPlayer Plugin: Version: Unknown
3rd Party Preference Panes: ?
Flash Player Support
GlimmerBlocker Support
handyPrint Support
Java Support
MenuMeters Support
Perian Support
Shades Preferences Support
SwitchResX Support
WacomTablet Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
⨀: Disk size: 232.96 GB Disk used: 165.67 GB
☾: Disk size: 233.44 GB Disk used: 298 MB
Destinations:
Ectoplasm [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 77
Oldest backup: 2013-12-21 04:36:50 +0000
Last backup: 2014-08-23 15:01:44 +0000
Size of backup disk: Adequate
Backup size 931.16 GB > (Disk used 165.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
11% firefox
2% WindowServer
1% Dropbox
1% Console
1% plugin-container
Top Processes by Memory: ?
1.76 GB firefox
1.70 GB com.apple.automator.xpc.workflowServiceRunner
393 MB mds
262 MB iTunes
213 MB installd
Virtual Memory Information: ?
3.03 GB Free RAM
6.08 GB Active RAM
4.47 GB Inactive RAM
2.41 GB Wired RAM
1.56 GB Page-ins
0 B Page-outs
Again, I would really appreciate any suggestions or questions you can throw at me.
Thank youTry un-installing SIMBL. It is a system hack.
SIMBL Uninstall
SIMBL Uninstall (2) See solution posted by Linc Davis .
Try un-installing the applications you installed. Un-install using the developer’s instructions to make sure you remove all parts of the application. Some people recommend not installing an application unless you know how to remove it. When you find the problem application, you can try re-installing the others. -
Mouse down event handling of table control in subvi
Hello Everyone.......
I have created a vi which has a table control and xy graph... the function of the vi is to plot the data of two particular column of table into xy-graph after user selects the data from table.... In this vi , I have used mouse down event for selecting data set so that the color of selected row get changed for user reference....... the vi is working fine.....
My problem is that this vi is a part of main vi.. and I want to use this vi as a subvi.... So, in my main vi I have a table control which is connected as input to the subvi... I come to know that I need to register event for triggering a event in a subvi.......
(1) How to register Mouse down event of table control which is on Main Vi to trigger mouse down event of table in subvi.... Another Important thing is... how to link every property of table control of subvi to the table control of main vi... so it just act as single control adapting every property like when user selects a particular row its color changes in subvi....so it should be reflected even if user selects a row in main vi... I mean table control of main vi and subvi should be a single control...is it possible?
I hope I am clear......Thanks ..See the modified version of the VI. I use the 'Point to Row Column' method to get the cell that was clicked on - your method also worked using 'Selection Start' but I thought I'd show you an alternative.
I've used a single event structure to update two table controls - the point is that if you have the references to the controls you can update the control from anywhere. You can also 'register for events' to allow you to register for events from a different VI (again, using the references) that doesn't have the control on the front panel.
Couple of things about your VI:
You don't need to put a wait node if you have a timeout on your event structure.
You don't need the for loop for the columns/rows - if you look at the help for the 'Active Cell' property you can use a value of -2 for the row/column to select all cells in the row/column.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Attachments:
Highlight Selected Row in Table Control_lv2009.vi 13 KB -
PDA Mouse Down Event on Picture Control
While using the Mouse Down Event on the Picture Control for LabVIEW 7.1 PocketPC PDA, I want to get the xy coordinates on where the user tapped on the pict control. Any ideas or workarounds?
RobertHello Robert �
What do you mean by �outputting individual horizontal and vertical components�?
In the LabVIEW PDA module (and this applies to PocketPC and PalmOS), clusters will not show up in the PDA�s screen. You can use clusters to group controls/indicators but when there is need of sending a new value/showing the value in the screen, the bundle and unbundled functions have to be used, so that you can have individual controls/indicators to pass a new value/see the value, respectively.
So, from the Coords terminal in a Mouse Down/Up event, you need to unbundle the cluster and create individual indicators for each, the horizontal and vertical position.
I am attaching an example to show you what I mean. For PalmOS, the same applies.
H
ope this helps and if I misunderstood your post, please let me know.
Have a great day.
S Vences
Applications Engineer
National Instruments
Attachments:
PPC_Picture_Events.vi 30 KB -
I have been having a hard time figuring out where to fix this mouse down problem. On this new site magbacker.com, when you click the left navigation text the text gets smaller. I have a separate css style sheet called "sprymenubarvertical2.css" and a overall site css style sheet called "magbacker.css". I also have a few internal css styles on each page for specail design elements. The font size of the left navigation is 17px and on some of the pages it goes smaller when you click or mouse down on the text. Some page it stays the same which is what I want. I don't want the text to change when clicking it or doing a mouse down. I can post the css code here if necessary but you savy css coders should be able to see it based on veiwing the source code on the site.
I'm working on the site as you read this due to a tight deadline so some things maybe changed.
Any help on this seemingly simple fix would be most apprecaited.
http://magbacker.com
Thanks,
JayIn each page you have embedded styles. Change this -
a:active {
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #00F;
to this -
a:active {
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
color: #00F;
By the way, while browsing to one of those pages, increase the text size in your browser a few times and you'll see why we plead with people NOT to use absolute positioning as a layout tool. -
Mouse down on 3D picture control
Hi,
i would like to know how to indicate mouse down on the 3D picture control as can be done for the picture function.
http://forums.ni.com/ni/board/message?board.id=170&message.id=49423&query.id=66219#M49423
regards
king1Hi King1
I have been able to modify an example VI which came with LabVIEW v8.2 which uses the 3d picture control. I have added an event structure to the code which allows the user to pause the rotation of 2 objects in the picture display area. I have added notes to the block diagram which should help in describing its behaviour. the file is attached with this post.
I hope this is of some help, there are a few more 3d picture examples in the LabVIEW example directory which might also be of use.
Best wishes
Rob L
Rob L
NI Applications Engineer
UK & Ireland
It only takes a click to rate this message ;-)
Attachments:
3D Picture with User Selection.vi 61 KB -
Can I caputure the mouse down timing in flex ? If the user hold the mouse down for 30 milli seconds i have to fire an event. Please show me some pointers to implement this feature.
Create a global variable and on mouse down store the current time.
Also on mouse down, create a Timer object and let it fire each 250 milliseconds. It should check the current time against the stored time above.
In a mouse up handler reset the current time variable.
If you hit 30 seconds in the timer checking the time, do whatever you wish.
http://livedocs.adobe.com/flex/3/html/help.html?content=08_Dates_and_times_4.html
http://blog.flexexamples.com/2007/08/14/creating-a-simple-timer-in-flex-with-the-flashutil stimer-class/
http://groups.google.com/group/flex_india/browse_thread/thread/6404b8d35ce32907
If this post answered your question or helped, please mark it as such. -
Detect clicked cluster in mouse down event for clusters within multiple stacked clusters
With the help of Ben (see http://forums.ni.com/t5/LabVIEW/Determine-cluster-element-clicked-in-mouse-down-event/td-p/1245770)
I could easily find out what sub-cluster had been clicked on (mouse down event) within the main cluster, by using the Label.Text Property.
However if you have a cluster within a cluster within a cluster then you probably have to use individual mouse down events for each sub-sub cluster.
I just wanted to use one "Main Cluster":Mouse Down event and from that determine which of the sub-sub clusters had been clicked on - is this even remotely possible?
Chris.Chris Reed wrote:
With the help of Ben (see http://forums.ni.com/t5/LabVIEW/Determine-cluster-element-clicked-in-mouse-down-event/td-p/1245770)
I could easily find out what sub-cluster had been clicked on (mouse down event) within the main cluster, by using the Label.Text Property.
However if you have a cluster within a cluster within a cluster then you probably have to use individual mouse down events for each sub-sub cluster.
I just wanted to use one "Main Cluster":Mouse Down event and from that determine which of the sub-sub clusters had been clicked on - is this even remotely possible?
Chris.
Yes but... you will have to pass through 26 Kudos worth of Nuggets to get there (Well maybe you can skip the last 5 or so).
This Nugget by Ton teaches us how to use Dynamic Event Registration. (15 Kudos, must read and understand)
This Nugget by me talks about getting at references inside arbitrary data structures. (11 Kudos, You don't have to read the whole thing, only enough to get at nested objects).
SO use the stuff I wrote about to gather up the references to the clusters. Build them into an array and then use dynamic event registration and what you learned in that thread you linked in your question.
So Possible? Yes!
Easy? YOU tell me.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
ADMFlashPlayer Mouse Down/Drag problem on MACOS 10.5
I have successfully created a ADMFlashPlayer item however,
When I use the mouse to scroll or push a button, there appears to be no user feedback on the UI controls (Scrollbar or Button).
On closer inspection it appears that while the left mouse mouse button is held down there is nothing being refreshed inside the ADMItem flash player item. I know for a fact that the Flash movie is preforming the operation offscreen and is only rendered after the left mouse button is released.
I have tried SADMItem->Invalidate() & SADMItem->Validate() to force refresh the flash player, and dialog from a kADMIntermediateChangedNotifier event.
Force refreshing in this manner simply does not work (or any manner).
I believe this behaviour is only MAC OS related. My guess is that some sort of drag event, (or other mouse down event) is blocking any ADMFlashPlayer from updating its contents to be rendered correctly.
(If this is not a bug, it is quite possibly my code causing the problem)
I think the Patch panel Flash player may also suffer from this same problem?
Any help will be appreciated!I disabled the mail extensions by removing them from the ~/Library/Mail/Bundles/ directory. I didn't think the mail extensions could get patched into Mail.app by any other means, but if you care to clarify I would appreciate it.
-
Hi,
M using CS5 Flash.
I hav an image which i haved converted into a symbol(button)
Now the thing is..inside the Button movie clip, i hav embedded a sound only on the mouse-over keyframe but My problem is that when i click the button(mouse-down), i get the sound too.
can anybody pliz help me out.
I knw this is a very simple query but i new to flash and so, pliz dont mind for posting this one up.
Thanks a lot.That's the way Flash works, I don't know why, but it is. In order to get what you want, the sound only on mouse over, you'll need to use Actionscript to create an event listener, to control a function that will play the sound.
-
SG tutorial MP4 videos wont load. jpeg seq will only show on mouse down
Hello,
just got the SG trial installed yesterday : 2014.1 build: 8.1x128
The footage (MP4) in the first tutorial project works fine in PremPro CC & AE CC but wont load in SG.
After rendering it to a sequence (jpg,png,tga) the footage will appear in the window 'only' on mouse down or in full screen mode (again on mouse down).
Win 7 64 SP 1
I5 -2400 @3.1GZH
RAM 4GB
Onboard intel HD 2000
Appreciate any help on this.
Thanks
bThank you Silkrooster! I did the download of Quicktime and re-did the video training exercise, but this time it worked flawlessly! Thanks, Chuck
PS: As I entered the forum, I noticed someone else with the exact same problem that I had. But that person was able to ask their question in a couple of simple sentences instead of my long ramble! -
Basically, I want to build several independent buttions. When one button gets the mouse down event, some code is excuted once, but when mouse up, the button go to its original status, and wait for the next click.,
this should be pretty simple in other languages (C++, or Java), anyway, I feel so hard to figure it out in Labview.
Any help will be greatly apprecitated!
bestSee this post for some good guides to start with
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs? -
Problems with Mouse Down event for a picture control embedded in tab.
I noticed that when trying to get a Mouse Down event for a picture control that the Mouse Down will not be 'fired' if the picture is embedded in a tab control. It also appears that this problem exists for other controls (I only tested a slider in addition to the picture). It isn't much of an issue for me now as I can just poll the mouse property of the picture control, but the Mouse Down event has information that I may want access to in my next software revision (button pressed, and Alt mod). I could do that by handling the Mouse Down event for the tab itself and checking to see if the the mouse property isn't -1, -1 for the picture, but that seems a little bit too kludgy (sp?) to me and wouldn
't address the issue with other control types. Any chance of this being addressed by a patch sometime in the next couple of months???
Attachments:
TabProblem.vi 69 KBThe problem I reported above was in LV 6.1.
As a work-around, I used the mouse down on the tab control and did the math to decide if the picture was clicked.
I have been told that this was fixed in LV 7.0. I can not confirm.
You could call NI and ask about the service request number I cited above.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Itunes thinks my ipod touch is a iphone!!! help apple and wont show my ipod
first of all my iPod was not showing up then it keeps saying error occurred could not connect iPhone why is this i dont have a IPOHNE and i can sync my iPod will not show up i need help!!!!!!! i keeps coming up as iPhone and camera.
-
Hi all, I have urgent problem. I created PO with K (cost center) acc. assign., entered Cost center and automatically got expense account. Created GR and posted expense acc.&GRIR clearing account. In Miro it should be vendor & GR/IR clearing and tax.
-
Changing / swopping my slot loading CD-RW for a DVD/CD-RW combi drive
Can anyone explain to me how I can change my slot loading CD-RW for a DVD/CD-RW Combi drive?? I know it's something to do with the IDE cable but if someone could give me a idiot's walkthru guide I would apreciate it. x
-
GL Codes Marked for Deletion - Segregation
Hi, The users have some GL Codes that are in the Chart of Accounts but have been marked for deletion. The users now want these GL Codes to be segregated from the normal ones being used, by using a prefix such as "Z" or "X". Is it possible to do so an
-
Getting error message on ipad2 hdmi not compatible
Television with HDMI input is stating there is no signal and my ipad two gives me the error message "this accessory is not compatible". I am using the HDMI connector purchased from Apple store. Can anyone give me some advice (I have tried restarting