Mouse dragging cycle region not working What am I missing?

Hi,
Pretty new to STP. I'm using STP 2.02. I'm following a on line tutorial whereby the person just simply mouse drags and highlights a section on the waveform a section they wish to remove by command delete. dragging my mouse does nothing but move the entire audio clip.
I feel like a retard, seems like the easiest thing to do yet I can't figure it out..
Any guidance would be great.
Cheers

i figured it out. I just had to open the aiff file rather than bring it in via FC..
thanks!

Similar Messages

Mouse - Drag and drop not working

The Drag and drop feature is not working with my mouse. The mouse was tested and is fine. It's a software thing. It works with everything else, but if I try to select something and drag it, it doesn't work. Any advice?

PaulyK,
Believe it or not it may take multiple or several restarts....not just a couple. I have seen where it took 5 or 6. I have also seen where this did not clear the problem.
re: "Any other upgrades that might help with out having to buy new software"
The 10.2.8 update to Jaguar was the last before the "upgrade" to 10.3 Panther which is a paid upgrade.
There is a third party utility Dragster that may correct this problem or you can delete the associated files that it deletes manually. The files are:
com.apple.desktop.plist
com.apple.dock.plist (your choice to delete this or not)
com.apple.finder.plist
com.apple.LaunchServices.LocalCache.csstore
com.apple.LaunchServices. plist
com.apple.LauchServices. UserCache.csstore
LSApplications
LSClaimedTypes
LSSchemes
The contents of the /Library/Caches/ folder
You should have no problem with this utility or deleting the files manually if you go that route but I cannot vouch for it as it is third party....Use at your own risk!
edit: I just noticed that the link is no longer working for Dragster and the software now is part of a retired collection of apps from ifthen software.
If after multiple restarts and/or using Dragster or manually deleting the associated problem files you have no luck you might want to try applying the 10.2.8 Combo Update again to see if this will clear up the problem. Remember to repair permissions from Disk Utility before and after the update.
The Combo Update can be found here.
Post back if still no luck,
littleshoulders [:-)
Message was edited by: littleshoulders

Mouse drag, hand tool not working at all!

So I've installed Photoshop CC 2014 and Illustrator CC 2014 on my computer, started a new file but only found that any action that includes mouse dragging - creating shapes, hand tool, pen tool - do not work at all, everything just do not respond, when creating a shape it will treat it as if I have clicked once (which pops out the create rectangle window for size input..), the same situation happens to Photoshop as well (perhaps all Adobe CC software). I've been trying everything that have been suggested on the forum (some from the links below): removing all other software at the background (spotify, 1password, etc). Also I've tried with using different sets of keyboard and mouse, either wired and wireless, still no luck. One situation that finally works is that all software work perfectly fine in safe mode, then I rebooted back to normal mode, try killing any background process that was not running in safe mode, still...not working at all...
References:
(Illustrator CS6) Spacebar stops working seemingly randomly
Spacebar Shortcut: Hand Tool Not Showing and Not Working
Illustrator gets stuck on hand tool
My computer specs:
Windows 7 Pro 64-bit
Intel Core i3-4130 3.4Ghz
4GB RAM

wecon,
You could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How to set email notification on home page lock screen on iphone 4s . Settings did not work, what am I missing?

I have a iphone 4s. I cannot get any email notifications on the home page/ lock screen. Also to find out if i have mail i have to press on the email icon and it will update , then it will show i have mail. I talked to a verizon technician and went trough all the settings . He suggested to reset the settings to default , if that does not work i need to replace the phone. Any suggestions ? Am I missing something?
Thanks,
Miri

What are you rmail settings? Sounds like manual pull versus push, is this correct? If your email provider does not offer "push" mail like gmail or iCloud then change from manual pull to hourly or the interval you prefer; more frequent can degrade battery performance.
Also, go to Settings > Notifications and select "Mail" and move "view in lock screen" to on to see message previews in the lock screen.

CP8 GeoLocation not working - what am I missing?

Working on a windows 8 pc, cp8.
I created a variable for US with lat/long and a large radius.
I then put a caption for rest of project to display my var and the cpInfoGeoLocation var
cpInfoGeoLocation is blank - that doesn't seem right!
I created an advanced action:
If cpInfoGeoLocation is equal to US
Jumpt to slide 5
else
Jump to slide 8
I always land on 8.
Any ideas on what's going wrong?
Thanks everyone,
Lori

I tried it in preview mode and also published and then double clicked and tested in chrome, firefox and IE - none worked.
Does it have to be from an lms or webserver?

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouse

I want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!!

Why does drag and drop not work?

Why does drag and drop not work?

Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
If not - please describe exactly what the problem is.

Mouse pad virtual wheel not working in bookmarks menu

Hi,
My laptops mouse pad wheel does not work in the bookmarks menu. It works fine in any other application or on the main view in firefox. I'm not very organized and have hundreds of bookmarks, it's frustrating to have to wait for the up/down buttons in the bookmarks menu to scroll.
I've read https://support.mozilla.com/en-US/kb/Cannot+scroll+with+mouse+wheel+or+touchpad
which did not work.
Here are my specs. I won't dump the entire dxdiag, I'm sure there's a lot of redundant info. in it.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
System Information
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: NV53
BIOS: Ver 1.00PARTTBL]
Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
Memory: 4096MB RAM
Available OS Memory: 3838MB RAM
Page File: 1489MB used, 6185MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x1002, 0x4397
| Matching Device ID: usb\root_hub
| Service: usbhub
Gameport Devices
PS/2 Devices
+ Launch Manager
| Matching Device ID: *pnp0303
| Upper Filters: DKbFltr
| Service: i8042prt
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Alps Pointing-device
| Matching Device ID: *pnp0f13
| Upper Filters: ApfiltrService
| Service: i8042prt
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD

Maybe FCP 3 doesn't provide support for mouse wheel scrolling? I can't remember and I'm not going to install FCP 3 to test that theory.
You should be able to at least set the MS mouse driver to perform scroll wheel functions in FCP through the MS mouse preference pane (zoom in/out for example) but I don't know if that includes scrolling.

Field list on/off drag and drop not working in smartforms

Hello Friends,
field list on/off drag and drop not working in smartforms.
is there any settings or some components needs to be activated ??
i can drag the fields from the list but when i drop in the text node its not dropping tht field.
Regards,
Sunny

Hi Friends,
Even I am facing the same problems. What is the solutions for this ?
And may I know what software version (sap gui) are you using.

My iMac mouse right click does not work now

Hi all,
My iMac mouse right click does not work now. It was fine a couple of days ago.
Right click is definitely enabled, I have checked it several times.
A Google search revealed that in Firefox it could be that I'm not using the latest version of Firebug. I have auto updates on and Firebug is the latest version 1.11.3
I use right click for correcting spell checked words, instead of a suggested correct spelling I get the 'open in a new tab' menu.
In Firefox when I right click to open in a new tab I get the menu but it does nothing.
It is driving me mad
Any help will be greatly appreciated,
Thank you
P.S. thought it was suddenly working when I did the spell check in this post but it was the left click doign it....

I don't use Firefox so I can't test it, but it might be something to do with a preference setting. Have a look at this link (ignore all the instructions), just look at the image of the preferences, there appears to be a setting in Javascript preferences relating to contextual menus. Check to see what your settings are:
http://stackoverflow.com/questions/16377381/disable-firefoxs-silly-right-click-c ontext-menu

Optical mouse (AVF AM1940U) is not working in CQ40-101TU which is running Windows 7 32-bit.

Hi. I'm using Compaq CQ40-101TU which is running Windows 7 Professional 32-bit.. My optical mouse (AVF AM1940U) is not working in USB ports. The pointer of mouse is always stuck at top of the screen. I can move the mouse left or right to both edges of the screen at the top and can right click in this regard it works but I cannot move the mouse down the screen.
What is the problem? May I know how to solve it?
Thanks.

Ya. Another mouse didn't have problem. This is the first time I face this problem. When this optical mouse is plugged into USB ports, the driver named "iBall Advanced Mouse" is being installed. After that, my mouse cannot working.
Is that I have to install another driver before using this mouse?
Thanks.

PowerMac 5.1 drag and drop not working, any suggestions?

Powers Mid 2010 5.1 running 10.10.3, drag and drop not working smoothly, won't engage to drag. Any suggestions?

Thanks for the return, well, just trying to relocate a web screen or move a saved application from the desktop into a folder. I use Final Cut Pro Ten extensively and sometimes I want to drag something off my desktop into the time line on the FCPX. When I left click and hold on the item to drag it doesn't seem to engage then when it does move it quits along the way to the drop point. I hope that makes since too you? I use a Logitech two button with a scroll wheel wired mouse and have twin 32" monitors. Thanks Latranner

I AM USING KEYBOARD WITHOUT MOUSE AND LETTER "H" NOT WORKING

I AM USING KEYBOARD WITH NO MOUSE AND LETTER "H" NOT WORKING
DOES SOMEONE KNOWS WHAT CAN BE DONE.
THANK YOU
MARIA

I saw this issue before where cause was a bad preference for another application.
When I had the "can't type Shift H" problem in Entourage, it was a corrupt preference for FlightCheck, a preflighting program I use in conjuction with QuarkXPress that was the culprit.
First determine if the problem is in your User’s folder by creating a new User in System Preferences and test for the problem there. If it goes away then you know the problem is in your User’s folder.
Use new User to test for problems
Let us know the results

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Force quit will not work what do I try next

force quit will not work what do I try next

Other than the keyboard & mouse, disconnect all devices from your iMac.
Check out: Troubleshoot the spinning beach ball/freezing & crashing and Troubleshoot the spinning beach ball. Not sure if you have tried everything mentioned in these articles. If you have, and no one else can come up w/any suggestions, then it's time to lug your iMac to your local AS or an AASP. Diagnostic testing is FREE!!!

Mouse dragging cycle region not working What am I missing?

Similar Messages

Maybe you are looking for