Mouse flickers on remote viewed workstation

Workstations are winXPsp2, using ZfD7sp1IR1--when remote viewing the
workstations the mouse cursor on the workstation being viewed flickers. If
set to poll full screen it flickers about once a second. If set to normal
refresh, and the target workstation is viewing a rapidly changing screen
(like an online game) the mouse flickers constantly. Is there a way to
overcome this problem? Thank you--Chris G

Chris,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Allow end user to Remote Contorl or Remote View a workstation?

With ZENworks 7 we have certain operating room computers setup with remote
view capabilities to one specific workstation. These doctors needed remote
view capabilities to a computer that displays useful live medical
information.
This was done by using the software called "ZEN Workstation Browser" which
avoids needing them to start ConsoleOne to initiate a Remote View session
and of course, privileges are all controlled within eDirectory.
Does anyone know if this kind of capability might be possible with ZENworks
11? Can an end user be given limited access to ZCC such that they only have
the ability to remote view a specific workstation?
We're starting to roll out our agents and I'm not sure how to deal with this
unique setup. Because multiple computers may view that one workstation,
using RDP is not an option.
Thanks,
Marc

Marc Charbonneau,
Have you tried the ZENworks Remote Management viewer tool?
Else, then yes, you can give some users the rights to remote using the
ZCC.
Niels Poulsen
Novell Knowledge Partner
A TRUE RED DEVIL

Flickering screen during remote view

When I remote view a work station the screen will "flicker" on the computer
I am remoting into. Is there a way to stop this?

Jklocke,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

IE could not show remote View plug-in windows

Hi All
I install ZCM remote viewer application (10.3.4) to a workstation with IE8.When I install it completed,it should be show a remote viewer plug-in message on the webpage for install plug-in compoment.But I try to install some times...I make sure this application install successfully, but IE still not show the plug-in message ....How could I make IE show the message or How could I install remote-viewer plug-in manually.
wyldkao

Wyldkao,
if you have installed the plug-in, then there should be no message - if
you want to install it manually, click on Download ZENworks Tools in
ZCC, then go to Administrative Tools
Shaun Pond

Stand Alone Remote View

Hello,
I have been searching for a stand alone remote viewer for Zenworks 7. I found a few applications that seem to have worked with Zenworks 4 and they don't really provide the functionality that I need.
I need to have a stand alone application that will be able to either view the container with the workstation objects or the ability to scan the network for the objects.
Any ideas?

On Tue, 19 Feb 2008 20:16:01 GMT, cgrossko wrote:
> I have been searching for a stand alone remote viewer for Zenworks 7. I
> found a few applications that seem to have worked with Zenworks 4 and
> they don't really provide the functionality that I need.
try the wsbrowser from holger dopp www.hdopp.de
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de

Right for Remote View Only?

I am using ZfD3.2sp2 with ConsoleOne 1.3.5 or 1.3.6. I have a Help
Desk
that I would like to grant Remote View of a group of workstations. I
am
able to remotely control workstations as administrator. I have
checked
Remote Operator tab and the users show with Remote View and I have
granted
read right to the WM:Network Address property and write to the DM:ZEN
Remote View property of the Workstation object. I am able to ping the
workstation but receive a failure due to rights issue.
Can anyone tell me what rights I really need to allow a non-admin the
ability to RC a workstation?
Thanks,
Rob Bennett

Rob,
How about this one?
http://support.novell.com/cgi-bin/se...?/10087662.htm
Also, there is wizard that does this for you under c1, tools.
Jared L Jennings, CNE
Novell Support Forums SysOp.
http://support.novell.com/forums/faq_nntp.html
Posting with XanaNews Reader 1.15.8.4
Geek by Nature, NetWare by Choice.

Minimum rights for remote view/control

I am in the process of cleaning up rights in my eDirectory because our last Novell admin was quit liberal with assigning rights. What I need to know is what are the minimum rights needed to remote view a workstation and what the minimum rights needed to remote control a workstation. I have been searching Google and the forums for a while with no luck.

Originally Posted by mbreiden
On Wed, 30 Jul 2008 15:16:02 GMT, geistc wrote:
[color=blue]
write to the action you want to allow
read to mac address
DIDAS AG
Thanks for the quick response.
I ran through the wizard and then looked at rights it gave the account. It looks like the attributes are as follows:
Remote Control:
DM:Remote Control -- write
WM:Network Address -- read
Remote View:
DM:ZEN Remote View -- write
WM:Network Address -- read
The only thing I wanted to verify was, do I need to give those rights to the user objects as well as the workstation objects in order for this to work? I know some of the techs use C1 and right-click on the user, then select 'Remote Management'. Just not sure if I need to give rights to the user objects as well since the user will be logged in at the time the tech will be remote controlling/viewing.

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

N8 as remote control and life remote viewer for wi...

I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
Is there any software for N8 Belle ?

You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose.

Help networking a Security System DVR for remote viewing

Hey,
I am trying to network my Security System DVR for remote viewing but cannot seem to get it working. I have read some post on this site as well as many others and followed instructions to the T but to no avail.
Here's what I've got:
Linksys WRT54G2 V1 connected to a modem.
My DVR has 3 settings for networking:
-PPPOE
-Static
-DHCP
On DHCP, The DVR automatically sets these settings:
IP Address: 192.168.1.100
Subnet: 255.255.255.0
Gateway: 192.168.1.1
and then the DNS is the same as the one on the "status" area of the router settings...
Port: 10000-10020
I set up port forwarding for 192.168.1.100 for port 10000-10020 selecting "both"
If I pull up the "DHCP Clients Table" it shows the above IP Address but with no name....and the MAC address is something like ee:ee:ee:d4:03:5f.
I have tried to change the DVR to Static and do everything manually but thats not working either.
I created a Dynamic DNS with goddns.org but the DVR seems to have its own one built in that you cannot change. (at the bottom of the network settings it says something like "URL: 123484984.goddns.org----Status: OK." But when I try to type that in the address bar of IE it goes no where.)
I hope someone can tell me why its not working.... It was working when we first got everything set up...then it stopped. then I messed with it and got it working but didn't know what I did. Now its broken again and I don't know what to do.
-Ian
PS. When I am connected to the router via LAN cable and I type the internal IP Address assigned to the DVR by the DHCP (192.168.1.100:10000) it brings up the DVR menu perfectly. But when I try to log into it from a different location...with the external IP address...thats when I have trouble. I do not think my external IP has changed since I got this router set up.
Any help would be awesome.

Hmmm... Did that and I can't seem to get it working still. Whats weird is that as long as I am connected to the router...I can access it through the internal IP address.... (if using DHCP its 192.168.1.100:10000 and if using static its 192.168.1.99:10000)
Those both work when set up on DHCP for the first and Static for the second. But as soon as I type the external IP address with the port it doesn't work. Its like there is a firewall OR the port forwarding is not working. But everything on the port forwarding page looks good... Its enabled, set on Both, correct port range... 10000-10020...
Any Ideas?
-Ian

WVC80N software "unable to set up remote viewing" with TZO

I've researched this all night and I'm now begging for help.
I've got the camera all set up and I can view it while on the local network. The problem comes in when I try to sign up for the 90-day free TZO trial that comes with the camera to try to get remote viewing on my iPhone. I progress through the Linksys setup software (as is detailed here: http://www.tzo.com/MainPageSupport/HowToPage/LinksysHomeMonitoringNCameraTutorial.html) and between steps 7 and 8, I get a screen that says "Unable to set up remote viewing" with my network, click this link to learn how to remotely view your camera. The link takes me to a page on the TZO site that says "Oops, there was an unknown error with setting up you camern for remote access" and nothing else. It seems to die on the "Configuring Internet Server" step.
Within the camera's setup page, there's a link to the TZO website that tells me that because I have a WVC80N, I have to use the setup CD to set up the 90-day free trial, which fails as described above.
I've set the camera to have a fixed IP of 192.168.1.200
I've set the Alternative Web Access Port to 1024
In Port Range Forwarding in the router, I've set 1024 to 1024 to forward to 192.168.1.200 (not sure exactly what this does)
The router is a WRT160N
Any ideas?

Have you tried getting in touch with TZO and set the DDNS up the old fashioned way? I also know that TZO has a beta going on of a new IP camera application for remote viewing and this may also help. Not sure why the setup is failing though, but oook is probably right, something wacky with the router, IP or ISP that the setup software just doesn't like.
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Issue with folder in remote view

Ive just created a new web page which needs the use of a database so i saved my website under a separate name and tested it on MAMP first to make sure it all works. I then wanted to upload this to my live site, i did this by copying the new folder (admin) and pasted it into my live site. I then uploaded them and tried opening the page from the live site but it wont open. (Please see image below.) The other thing i noticed is when i look at my files panel in 'local view' everything looks fine but when i look at it in 'remote view' the admin folder (which holds all the new files) doesnt look right, the folder appears as one file and is blank?
```

Im not sure if it is that or if it has something to do with the code because this is what ive put in the connection/milesdata.php -
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_milesdata = "cust-mysql-123-12";
$database_milesdata = "milesdata";
$username_milesdata = "username";
$password_milesdata = "password";
$milesdata = mysql_pconnect($hostname_milesdata, $username_milesdata, $password_milesdata) or trigger_error(mysql_error(),E_USER_ERROR);
?>
This is the code for the page i currently cant open (insert_donation.php) -
<?php require_once('../Connections/milesdata.php'); ?>
<?php
$con=mysqli_connect("cust-mysql-123-12","milesdata","username","password");
// Check connection
if (mysqli_connect_errno())
   echo "Failed to connect to MySQL: " . mysqli_connect_error();
mysqli_query($con,"DELETE FROM donation WHERE dateCreated < DATE_SUB(NOW(), INTERVAL 1 DAY");
mysqli_close($con);
?>
<?php
if (!isset($_SESSION)) {
session_start();
$MM_authorizedUsers = "";
$MM_donotCheckaccess = "true";
// *** Restrict Access To Page: Grant or deny access to this page
function isAuthorized($strUsers, $strGroups, $UserName, $UserGroup) {
// For security, start by assuming the visitor is NOT authorized.
$isValid = False;
// When a visitor has logged into this site, the Session variable MM_Username set equal to their username.
// Therefore, we know that a user is NOT logged in if that Session variable is blank.
if (!empty($UserName)) {
    // Besides being logged in, you may restrict access to only certain users based on an ID established when they login.
    // Parse the strings into arrays.
    $arrUsers = Explode(",", $strUsers);
    $arrGroups = Explode(",", $strGroups);
    if (in_array($UserName, $arrUsers)) {
      $isValid = true;
    // Or, you may restrict access to only certain users based on their username.
    if (in_array($UserGroup, $arrGroups)) {
      $isValid = true;
    if (($strUsers == "") && true) {
      $isValid = true;
return $isValid;
$MM_restrictGoTo = "index.php";
if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
$MM_qsChar = "?";
$MM_referrer = $_SERVER['PHP_SELF'];
if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
if (isset($_SERVER['QUERY_STRING']) && strlen($_SERVER['QUERY_STRING']) > 0)
$MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
$MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
header("Location: ". $MM_restrictGoTo);
exit;
?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO donation (name, url) VALUES (%s, %s)",
                       GetSQLValueString($_POST['name'], "text"),
                       GetSQLValueString($_POST['url'], "text"));
mysql_select_db($database_milesdata, $milesdata);
$Result1 = mysql_query($insertSQL, $milesdata) or die(mysql_error());
$insertGoTo = "insert_success.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Insert data</title>
<style type="text/css">
@import url("../Style sheet.css");
a:link {
          color: #D91327;
a:visited {
          color: #D91327;
a:hover {
          color: #CEB239;
a:active {
          color: #D91327;
</style>
</head>
<body>
<div id="container"><img src="../banner.jpg" width="1082" height="187" alt="banner" />
<p> </p>
<p class="admin_heading">Insert Record to Database</p>
<p> </p>
<form action="<?php echo $editFormAction; ?>" method="post" name="form1" id="form1">
<table align="center">
    <tr valign="baseline">
      <td height="25" align="right" nowrap="nowrap" bgcolor="#E6CC7F">Deceased Name:</td>
      <td height="25" bgcolor="#E6CC7F"><input type="text" name="name" value="" size="70" /></td>
    </tr>
    <tr valign="baseline">
      <td height="25" align="right" nowrap="nowrap" bgcolor="#F5E7B8">Deceased Unique Url:</td>
      <td height="25" bgcolor="#F5E7B8"><input type="text" name="url" value="" size="70" /></td>
    </tr>
    <tr valign="baseline">
      <td nowrap="nowrap" align="right"> </td>
      <td><input type="submit" class="submit" value="Insert record" /></td>
    </tr>
</table>
<input type="hidden" name="MM_insert" value="form1" />
</form>
<p> </p>
<p class="maintext">If you wish to just update data in database please click <a href="update_donation.php">here</a></p>
</div>
</body>
</html>
The only difference between this page i cant open and the other page donation_2.php that i can open is that there is an extra piece of php code put in to delete the data after 1 day, which when i remove to see if it swill work without, loads and works fine?

Cannot remotely view camera image of WCS54CGA

I have wireless camera WVC54CGA. It is wirelessly connected to my Netgear router with WEP encoding. I can view the camera image via the camera utility. I can also view the image with my IE8 browser using the OCX plugin while at home. However when I go to a remote WIFI hotspot to test remote viewing I am not able to connect to:
http//----camera ipaddress-- .
I am using Comcast as my ISP. The camera IP address always comes up as the same value when I power up. So I do not believe I need to set up DDNS. I had not done the following on my first remote test.
I now see comment s about setting up port forwarding in my router for ports 1024 and 80 and setting these ports for the camera. Going into the router I added port forwarding for the http name with the camera IP address. In so doing it selects 80 for the start and ending addresses. I cannot seem to set up another port. In the camera setup I set “Enable ” (for http/web connections). It seemed to select port 1024. I am not sure I am doing the correctly. Can some one help?
Solved!
Go to Solution.

When you login to the Camera Setup page, You need to click on the "Advanced Configuration", and then you need to click on "Options" tab. Under Options tab you will find "Alternate Port" By default it will be Disable, So you need to Enable it , and By Default the Port No will be 1024 and you need to click on Save Settings.
Now you need to login to the Setup page of your Router and click on "Application and Gaming" tab and you need to Open the Port 1024 and 80 Pointing towards your Camera IP.
Under Application and Gaming Tab, you need to click on "Port Forwarding"
Application Name    Start Port End Port    Protocol IP address Check BOX.
Camera 80    80    BOTH Camera IP    Enable
Camera 1 1024    1024    BOTH Camera IP Enable
Now you can click on Save Settings...
Once you are able to the same page, You need to click on "Status" tab and below you will fine your Internet IP (WAN IP) . So note down your WAN IP.
So using that WAN IP you can View your Camera from the Remote Location.

Lightroom 1.0 and 1.1/Web Module/Flash gallery (default) remote viewing issue fixed.

Background: We experienced problems remotely viewing the Lightroom auto-generated Lightroom Templates/Flash gallery (default) template.
<br />On our local PC running XP SP2, the gallery works just fine. When uploaded, it doesn't work anymore when visited remotely from another PC.
<br />
<br />Fix: We found out that the top of each html file contained the code:
<br />
<br /><?xml version="1.0"?>
<br />"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<br />
<br />Those are document type declarations saying the code in the page is XML and follows the Strict XHTML guidelines as defined by w3.org; it tells the browser how to interpret the code that follows.
<br />Our guess was the code used doesn't follow strict XHTML guidelines, and it broke the page by preventing the browser from displaying the rest of the html--perhaps a problem with our server too? Anyway, deleting this header fixed the problem.
<br />
<br />It worked for us. Dunno whether other users experienced the same problem. Anybody reported/noticed the same issue? Any feedback/suggestion/interpretation? Has this been reported to Adobe before?

Oups, the code disappeared when I posted; here it is (added extra _ after > and before < and one space in between ht tp to freeze it!):
<_?xml version="1.0"?_>
<_!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"ht tp://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"_>

Why can't I install a plug-in for my CCTV remote viewer?

Why can't I install the plug-in for my CCTV remote viewer?

You can only install apps from the App Store.

Mouse flickers on remote viewed workstation

Similar Messages

Maybe you are looking for