Mouse gesture causes sudden increase in window size

I'm unsure where this question belongs, I have searched high and low but obviously have not struck the right combination of search terms. So if this is not the correct place please point me in the right direction.
I generally have the Safari app opened to almost fill the whole Mac screen and have 5 or 6 tabs opened ready to look at each on in some detail.
Sometime when searching the web with a few windows open, using Safari 5.1.4, Inadvertently my finger(s) brush the top of the Magic Mouse and the primary open window will zoom in [enlarge]. At least I think it is a light finger touch which causes this, unless it is a slight movement of the mouse itself. So what was visible, ordinarily normal, on a single web page is now extraordinarily expanded and only a small portion can fit and will appear on the web page. This happens when I go to attempt to drag the window up/down/sideways but I never get to that action. I have no keys pressed on the keyboard [Apple Bluetooth]. This anomaly does not increase the web page window size to fit the screen.
I have tried the CMD - (plus) keystrokes to no avail. Similarly the CNTL - scroll wheel will not bring the page back to correct [previous] size. The only solution is to CMD-W that page and reopen to normal size, in effect, start again.
I have no third party software on my Magic Mouse and I can not see any gesture to do this on the System Prefs for Mouse. I can not re-create this happening no matter what gesture I use on the Mouse and thus am unable to identfy the cause. The zoom happens so fast I can not tell where my fingers were at the time. I can find nothing relevant in Sys Prefs>Universal Access>Mouse>Mouse Options. I have Sys Prefs>Universal Access>Seeing>OFF checked. AFAIK I have no third party apps on my iMac which have any bearing on zoom. I have googled but as usual google results depend on the search terms which I seem not to be able to accurately describe.
24in iMac 8,1 6GB RAM, OS X 10.7.3.
I would appreciate any advice.

What you describe sounds like the Smart Zoom gesture for the mouse - a gentle single-finger double-tap on the mouse will zoom the contents of a Safari window. Repeat the gesture to bring it back to normal.
This can be disabled in System Preferences > Mouse > Point & Click by unchecking the Smart Zoom item.

Similar Messages

Sudden Increase in database size

Hi all,
I have noticed sudden increase in sys schema size, after making queries on DBA_TABLESPCAES, DBA_DATA_FILE,
DBA_EXTENTS,DBA_SEGMENTS.
Does it means Oracle has generated lot of data after queries to these views ?
It's very urgent .
Please reply.

Hi,
Is any application accessing this database? If yes, then did you confirm with the application contact whether any heavy changes have taken place in the application/database? I think that an increase of 300M is not huge but normal/acceptable. However, it is a factor of the actual database size. What is you database size?
Regards.

How to increase main window size dynamically in sapscript

Hi,
I have to print all records which are available in internal table in a main window.The main window is in between two variable windows.And below two other varaible windows are there.
I want main window size to be increased as per no. of records available(max 12 records) in internal table.
If the specified size is insufficient then the variable window which is below the main window should move below to accommodate the records available in internal table.
This is very urgent requirement.
Please help me.
Regards,
Vidya

Hi Vidya,
Main Window size cannot be changed dynamically.
They are static values.
However, i hate to say this again but
if you use a table with a footer the footer of the table will move up if the number
of records are less. Sorry for not having a more positive reply.

I would like to know how to increase the window size and message font size on the the Three Button Dialog.vi

I like using the Three Button Dialog .vi. However, I am doing a job were I need to use a larger font size. I tried to adjust the core vi but could not make it do what I wanted. Any help would be great.

Jeff Bohrer wrote:
1: VI Properties Window Size- Check maintain proportions of window for different monitor resolutions. (Your users will thank you)
Jeff,
Why do you think that is a good idea? When I opened your VI on my screen, the buttons were cut off at the bottom, and there was a slight cutoff on the right side. Without scrollbars or the ability to resize the panel, (which I generally wouldn't want on a dialog box anyway) there is no way to be able to see the whole dialog.
Did your VI show all of the buttons and show all of the text box? On mine it looked like this.
What was your screen resolution and your monitor aspect ratio? Mine is 1680 x 1050 for a 16:10 ratio. I think you will have problems with checking this box. I would recommend unchecking it. Suppose you programmed on a 16:10 screen, but someone else has a 16:9, or even a 4:3. That is going to screw up the appearance of the dialog unless you take the time to resize the buttons and text inside the dialog. (And I feel checking the resize option inside the Window Appearance settings just never works right either.)
If I was the user, I'd appreciate a dialog box that wasn't cut off.
Attachments:
3ButtonDialog.PNG ‏6 KB

Need to increase main window size except last page in smartforms

I have only one main window in a smartform to print a invoice. Currently the mainwindow size is small because i added some additional info to print at the end of the main window.{i.e with some tax details}. All the pages execpt the last page has free spaces. Now the requirement is to increase the size of the main window to avoid the blank spaces except the last page.
I have used the SFSY-FORMPAGES. THIS is not working to identify the total no of pages of the form. i have condenced it also.
Can anyone give some details to solve this.
Thanks in advance.

Hi,
I don't understand ... the size of the main window is not link between the different page ... so there is no problem.
My main window in all the form are never the same size between first page and next page.
Rgd
Frédéric

Increase main window size in the second page

Dear Experts,
In my first page i have the main window, i want to increase the size of main window in the secon page. how?

Hi Venkey,
When you have two or more pages in a smartform it is necessary that each page should have it's main window. But one important thing is that all the main windows of all the pages should be of same width and height. You cannot have different measures for each of the main window. If you do so you will end up in run time error.
In second page, add window and make it as main window. Make sure that width and height is same as main window of first page. Next add another window and make it as secondary window. Later add any components like templates, texts etc to this secondary window. Otherwise they will not be shown up during print or print preview.
Let me know if you have any further issues.
Thanks,
Rajesh

How to increase log window size ?

I use System.out.println() to display debug messages in the log window but there is a limit of lines and there are so many prints of the stack trace that I can't see my debug messages.
If I could increase the number of lines displayed, I could see my debug messages before the stack traces.
I've looked in DefaultServer-diagnostic.log and my debug messages are not in this file.
I could send my debug messages to a file but I would like to keep using println and the log window.
I'll use the debugger for now.
Thanks,
JP

JP,
it's not clear to me where you what to show the output. When you run the app inside jdev using the embedded wls or when you run the app outside jdev using a full wls instance.
If you are using jdev you can increase the number of lines via the Tools menu: 'Tools->Preferences->Environment' select 'Log' and increase the 'Maximum log lines' property.
If you are running a wls instance you should look for the console output in the DefaultServer.out or DefaultServer.log files.
Timo

How to increase login window size ?

Hi all,
The default size of the login window is quite ridiculous on my 24" iMac... I've 5 accounts and I need to use the scrollbar to access the last one, while my screen is so big !
I don't have this problem on a 20" iMac under MacOS 10.3.9...
Does anybody knows a method to change this size (e.g. a property to be added to loginwindow.plist) ?
Thanks in advance,
Marco

scapesuiter your reply is ridiculous
the question is not how to change the resolution but how to see more login accounts.

Sudden Increase in Library Size

Without downloading (to my knowledge) any additional music files, my library grew from 15 GB to 195 GB overnight. I've already tried compressing files, but now I need a way to sort by size to find the culprit files. Any ideas?

rcunio wrote:
I need a way to sort by size to find the culprit files. Any ideas?
Click on the "Size" column. If Size is not visible, enable it by going to View > View Options.

Interaction Agent - Account Search view - How to increase the window size

Gurus, I have 2 views on the Interaction Center Agent Account Search screen. On the left side ICCMP_BP_SEARCH component with BupaMixsearch view and on the Right side, we can customize such as IBase search / Customer Invoice etc through configuration. I went ahead and removed the configuration for IBASE. so the right side panel/view area is empty. How can I strech the Account search view (move the fields to right side panel) instead of 2 column layout.
Edited by: Sai on Oct 1, 2010 10:48 PM

If you want to change the memory only for your app in eclipse go to the menu
    Run -> run...select your configuration on the left side and go to the Arguments tab on the left side; enter your options (-XMs...) in the VM arguments box
to change it globaly (in eclipse) go to the menu
    Window -> Preferences...in the tree select
    Java -> Installed JREsselect your JRE in the right window part and press the Edit... button
put your options as Default VM Arguments:
Message was edited by:
S_i_m_u
1 month old problem...

Window size increase

Dear Experts,
how can i increase the window size?
Regards
Khan

you go in se71 and type your program and type language de and go in change mode and then in menu go in utilities and convert original language from de to en.
after change original language you can change the window size.
if helpful please give points
Regards
Maqsood

How can I change the default window size of a new message permanently?

The mail window opens up very small and every time I must increase the size manually. I want to be able to set it so it opens larger or at least opens to the saem size as a previous mail window, which is what Mail used to do.
Also, can anyone tell me how to stop that new mail window from opening on the bottom left of my screen? I need to move it in orde to increase the window size. So, 2 default actions that are a psin to constantly deal with.
Is there any guru out there who has had this problem and solved it? Thanks!

http://kb.mozillazine.org/Font_settings_in_Thunderbird

How to configure window sizes?

I have a new Macbook Pro and when I open new windows, especially documents or downloads, the windows are less than half screen. Can I somehow set this up, so that any window I open will always be Full screen, or do I have to manually increase the window size to full screen myself?
Thank You!

How about clicking the green button in the upper left. It should remember that default setting.
I also use RightZoom.app for better functionality across the board.

What is the mouse gesture to minimize all windows?

I am having trouble understanding the mouse gesture that minimizes all windows back into the dock. I keep on doing something which causes this to happen and I cannot figure out or find anywhere what this gesture is.

Do you mean ctrl-clicking the Composite Channel icon in the Channels Panel?

Windows 7 mouse gestures don't work with DW and FW

I discovered that the mouse gestures don't work with Dreamweaver CS4 and Fireworks CS4 windows. When I drag a window to the right or left, nothing happen. The gestures words fine with all other programs, even Adobe programs like Photoshop or Lightroom. Can anyone help?

Thanks Robb. I tried those options but it didn't work, but I'm posting here the final resolution in case anyone else encounters the issue.
I had the local desktop support check out his PC and it turns out that the Windows 7 screen resolution was causing the issue. The only reason it was caught is because his desktop sharing software also was not working correctly.
Within the display settings Windows 7 allows you to display text/icons larger without changing the resolution. The user's display was set at 150%. After changing to 100% (default) the desktop sharing and Essbase double clicking are working.

Mouse gesture causes sudden increase in window size

Similar Messages

Maybe you are looking for