Mouse hover doesn't produce preview in an application

I use a Bible program called Logos 5. For months I have had an issue where my mouse hover over a reference doesn't produce a preview, but only in one area of the program - my personal notes.
Recevied an email from the comany that said,
That specific tool tip is one that we are relying on Apple to make a call back to us for it to appear. What this means is at some point you, or a piece of software you’ve installed, or changed settings from, has modified the Apple tool-tip settings which is, in this case, disabling that tool-tip. The fact that it does appear when you hold down a modifying key also points to the fact that this is a system setting that has been modified.
Any clue what program or setting could have interfered? I do not have this problem on an older iMac with the same program & files loaded.

Hi All,
I have got LabVIEW 8.0. I make a VI for discovering BT targets. It works fine on my computer and also fine when I make a application.
I don't have any problem with this function and the discovering of BT
target. I made the test of the PC of my collaegue and It works fine too.
Two tests done : One with a own Vi and an own application on my PC ==> everything OK
                            One with the Vi and application of Aquila1981 from the folder "rest.zip" (see first thread)==> everything OK
My config : Win XP Pro ver 2002 SP2
                  Pentium IV (3,4 Ghz)
                  1 Go of RAM
Targets : Pocket PC Asus A620 BT
               Sony-Ericsson Mobile Phone K750i
BT stuff : BT USB Stick
                Manufacturer : Broadcom ==> Blutonium BCM2035 BT 2.4 Ghz Single Chip Transceiver
                Driver version : 5.1.2600.2180
                Firmware Revision 00.04
Let me know if you have some problems.
Julien Roland
AE of NI Belgium
www.ni.com/support
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer

Similar Messages

Mouse hover doesn't show URL since I installed Firefox 4.0

Since I installed Firefox 4.0, when I hover the mouse over a link I don't see the URL anymore. All I see is a small empty white box under the pointer. I've tried uninstalling FF4, installing the older version, disabling hardware acceleration, and several other solutions I've found on this site, but nothing has worked so far. I don't have this problem with Internet Explorer, but I don't want to use IE. Any ideas? Thanks.

You should be able to see where a link is going to take you on the Status bar at the foot of the page.
If you want a permanent status bar, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

Disabling Mouse Hover Feature?

Good Evening,
We have a new Pavilion g4-2029 laptop with Windows 7. Both the built-in touchpad and a Logitech mouse we just bought have a very annoying way of interpreting a hover over an item as a "click". I have looked for settings to disable this un-helpful function, but even unchecking a block that talks about "mouse hover for clicking" doesn't change the way anything behaves.
Can somebody please tell me how to turn this off, so that we have to Click using buttons as on a regular PC?
Thank you,
Kurt

Hi,
There is no option to diable auto-alignment in FormsCentral, but you may create a PDF form in Acrobat pro and then import it into FormsCentral to distribute it.
Thanks,
Wenlan

Bridge doesn´t show preview of tif-images

Hi,
I uses Bridge CS6 on a Mac with MacOS 10.9.2. Suddenly bridge doesn´t show previews of Tif-images. It´s also impossible to fill in any metadata. The program also says that the image isn´t tagged with any color profile. I don´t have these problems with jpegs, only with Tif-images. I even get previews on the RAW-images. Does anyone know what the problem can be?
Ulf

I guess I have to try to reinstall the program.......
I'm 99,99 % sure that won't help solving your problem because to possible being effective you also should use the Adobe Clean tool to get rid of a lot of the hidden files that just stay put during a normal reinstall. But if you want to do something easier instead of reinstall, quit Bridge and go to the user library (by default hidden per OSX 7, use Finder, menu Go with option to reveal this library)
In the preferences folder is plist file for Bridge (com.adobe.bridge5.plist), drag this file to the trash. Then in same library go to the folder Caches / Adobe/ Bridge CS5 and inhere delete both plug in and folder called Cache. (this means recaching the previews and thumbs).
Then restart Bridge holding down option key and again choose 'reset prefs'. All previous deleted items will be replaced with new, fresh and empty ones and you have an almost like factory settings Bridge without the need of reinstall.
But I really suspect it comes down to the Tiff files so maybe also a reset of preferences in PS might be worth a try.

Bubble Chart mouse hover issue

Hi,
we are facing problem in removing mouse hover data point in the bubble chart.
Requirement is such that we do not want to show a data point in mouse hover in a bubble chart.Since size of bubbles in the chart have been mapped with these values,these are necessarily shown as a data points in mouse hover.
Is there any means by which we can continue mapping size to these data values and still not show in the bubble chart mouse hover.
Thanks,
Deepa

Thanks for ur response
Actually I Require to show the mouse hover values for other data points except size.If I uncheck the "mouse hover option"...Mouse hover property will vanish at all.
Thanks,
Deepa

Making tooltip appear on other events (not just mouse hover)

Is there a way to make tooltip text appear besides merely the mouse hover event? For example, could you set it to appear with Click, Enter, Exit and/or Change?
And if you can, will those pesky Javascript warnings popup too?

I have three iPhone users here at work who are experiencing similar symptoms, also all starting yesterday afternoon (February 4, 2014). All events still appear in the calendars on their iPhones, but very few events appear in their calendars on iCloud.com website.
For days that show some items, viewing that day in "Day mode" on iCloud.com then causes the missing events to appear for that day. But some days show no events at all on iCloud.com, and viewing those days in "Day mode" does nothing.
All three users tend to have lots of "all-day" events on their calendars.
It is as though the iCloud.com website's calendar is not properly refreshing or displaying the events which are clearly still saved in their iCloud accounts.
(As a side, all three users can still see all events in Outlook on their PCs, which is set to sync with the iCloud accounts).
Anyone else seeing this or have any suggestions?

Mouse Hover in some browsers displayed...

I noticed something funny while testing my website in browser labs. I have some css rules to change some background colors for mouse hover. In the browsers I tested, Firefox 4.0 for Windows seems to show these rules for approximately the center of the page (e.g. it acts as if there is a mouse hovering there).
Since this is not consistent between browsers, it would be preferable if the mouse didn't hover over pages at all (unless you can let us set where and do this for all browsers).
edit: actually this stopped and then reappeared, so it seems to be inconsistent even within the same browser. It's hard to tell if I messed up a css rule when the displayed page might be different in browserlab between refreshes (but without a change in my code).

Hi Travis,
Thanks for letting us know about this, we'll look into it. If your page is public, can you please post the url so we have a test case that demonstrates the behvavior?
Thanks,
Mark

Installed Firefox 3.6.10 now my mouse wheel doesn't scroll

I just installed FF 3.6.10 update, and now my mouse wheel doesn't scroll. I checked my mouse settings, and all is correct. Mouse wheel scrolls in non-Firefox applications, including off-line folders and online IE. Mouse wheel worked fine with last version of FF. Also tried hooking up a different mouse, (an old mechanical one at that), same problem. If this cannot be fixed, how can I uninstall the latest update and rollback to the previous version?

thanks for all the tips, however none of these work. Installed 3.6.10, 3.6.11 and latest version 3.6.13 but the mouse wheel is still not working.
Waiting for comment from Mozilla. If they take this problem serious, which I doubt, reading about the problem since September and 86 people who reported...

Mouse Hover Color in Horizontal Dropdown Navigation

Hi,
Mouse Hover color in the Horizontal Dropdown Navigation scheme is not changed even if you apply a different stylesheet. It remains the default blue. Is there a setting some where or it needs to be modified in the navigation scheme.
thanks
-Sachin

Sachin,
Are you talking about the mouse hover color for the dropdown menu entries? That stylesheet class is defined in a different stylesheet. Look in
<imageserver dir>\imageserver\plumtree\common\private\js\jsportalmenus\122846\styles\css\PTPMMenu.css.
The number might be different on your system. If you view the HTML source on a portalpage and search for PTPMMenu.css you will see the number your portal is using. The styleclasses you want to change in PTPMMenu.css are .PTPMMenuBody .hoverand .PTPMMenuBody .hover td. You might also need to change other classes with the highlight color depending on the type of entries you have in your menus.

Mouse hover style not changing

Hello
I am working on branding and am not getting the mouse hover css like
About Us same I want to do in Resource,selfservice,AdminLinks in second image
Thanks,

Its Top Navigation bar and the class name is "menu-item-text" .In the same top navigation bar I have subsite also when I mouse hover on that than am getting background image on mouse hover.

Robohelp 9 WebHelp - Searching doesn't produce any results.

Hi, I upgraded to RoboHelp 9 last week and now searching in Webhelp doesn't produce any results. I've created a new project, used the sample project, tried generating it to a new folder and results remain the same.
When I select the search tab, the status bar flutters with the "Waiting for file...." displayed indefinetly with the occassion display of the javascript: (void);
Screens shots are from the RH 9 sample project. Results are the same with my projects. CHMs generated work fine!
Any suggestions?

Mary
You added the problem to another thread that was not related as the issue there is the use of HTTPS. I have deleted that post.
You also started a second thread with a the same question. I don't understand how asking the question twice will help so I have locked that thread but created a link to this thread so that anyone with an answer can help you. If there is a reason for starting a second thread, please let me know.
Please just ask once and wait for a reply as this wastes moderator's time that is better used trying to answer questions.
Now to the problem. Searching with Chrome installed works just fine for most people so the problem seems to be local to you. If I have read you correctly, after installing Chrome, the search breaks no matter what browser is used.
Was that checked on other machines or just yours?
IGNORE THIS QUESTION - The answer is YES and that was in the post.
Did you also check that search was broken with the supplied sample projects? I know that works with the three browsers being discussed here?
Where was the help installed when tested by you both standalone and from the application?
Questions 2 and 3 are really only related to problems with Chrome. I have not seen anyone report Chrome also breaking the search in the other browsers. There's more to this than meets the eye as Chrome has not caused that problem for anyone else, or at least, no one has reported it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to make spry accordion open on mouse hover ?

hi everybody i have just a simple question about spry accordion in cs4 it try to open it using mouse hover not onclick
can anyone help me plz ?

This is one way
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Untitled Document</title>
<script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab" onMouseOver="Accordion1.openPanel(0); return false;">Label 1</div>
    <div class="AccordionPanelContent">Content 1</div>
</div>
<div class="AccordionPanel">
    <div class="AccordionPanelTab" onMouseOver="Accordion1.openPanel(1); return false;">Label 2</div>
    <div class="AccordionPanelContent">Content 2</div>
</div>
</div>
<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>
Another way is to have a SpryEventListener. Look that up for further info.
Ben

I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

[solved] Nautilus on Gnome doesn't show preview img of any video file

Nautilus on Gnome 2.24 doesn't show preview image of any video file. Images are normal. Somebody have this issue too?
Last edited by alessandro_ufms (2008-10-24 12:29:25)

Nautilus uses Totem and Gstreamer codecs to show video thumbs. Maybe a reinstall would solve the problem. Actually, I have no idea other then this.
Last edited by GERGE (2008-10-24 12:22:00)

Resizable menu items on mouse hover

Hello
I need to make a resizeable menu like the menu.gif picture I uploaded. For example the menu to have 5 or 6 elements doesnt matter the problem is to make them adjustable on size (will be different movie clips each one) on mouse hover over each one of them but also snap like this. If someone have any code that could help me please tell me
Thank you all!

thank u i ll search it!

Mouse hover doesn't produce preview in an application

Similar Messages

Maybe you are looking for