Mouse Issues

Just downloaded and installed the latest update from Apple, and have noticed an issue remains with the touchpad mouse. If you close an application or window using command-Q or W, and then use only the far right side of the mouse, the cursor does not move and is non-responsive. This is true for about 1/4 of the far right side of the mouse. Moving your finger toward the center to reengage the mouse all is fine. I have only found this directly after the combination of closing a window as described above.

I have a brand new mac book pro intel duo, and I have similar touch pad issues. As soon as I use the keyboard on any situation, weather it is to scroll or type, the touchpad becomes unresponsive on the right hand side. Once I touch the left hand side, it starts working again. It can get aggravating for a right handed laptop user.

Similar Messages

Magic Mouse issues after updating to iTunes 11

Hi,
Just updated to iTunes 11, and immediately after installing I have been losing Bluetooth connection to my Magic Mouse. This usually happens when I click on an icon in my dock to launch an App. Specifically, most often when I am launching iTunes. I've ruled out a battery issue, as I've replaced them and it doesn't make a difference. I've even cleared my PRAM at startup (CMD+OPT+P+R at startup), since I saw this suggested for similar Magic Mouse issues not related to iTunes. Resetting the ram made no difference in my case.
I've had the Magic Mouse for 2+ years, and this has never been an issue before. In fact, I've never had any connection issues with the mouse that weren't related to weak batteries, and everything was working great until I installed iTunes 11. Just wondering if others have had this issue since upgrading to iTunes 11, and if so, how it was corrected?
Thanks.

Hi, I've not had this issue, but iTunes 11 does seem to be doing something to my Magic Mouse. For example within iTunes 11 I can no longer swipe forwards and backwards. Not sure if there is some kind of hitch with the new iTunes software and the Magic Mouse firmware?

T400 mouse issues after spill

Hi,
I love my T400. It is the best built, most trouble-free laptop I've owned. Now I have an issue due to a stupid spill.
I spilled a fair amount of beer over the keyboard and immediately powered down. If I had it to do over I would have uplugged and removed the battery, but hindsight is 20/20 as they say.
At any rate, I unscrewed the keyboard and examined it and below it and didn't find any beer residue except on the keyboard itself. I popped all the key tops off and cleaned the entire area with ispropyl alcohol. There was a lot of dirt and hair in there. I think I went through about 70 double-tipped swabs. I also looked at the underside of the trackpad and didn't see anything that looked like it needed cleaning. I didn't remove any ribbon cables.
I'm using the same laptop right now and it is fully functional with the exception of an annoying mouse issue. I'll refer to the buttons as upper left, upper right, lower left and lower right which should be self explanatory. I've never used the upper middle button so not even sure what it is supposed to do.
The first thing I noticed was that the lower left button didn't work and the lower right button seemed to only work in certain instances. I hooked up a USB mouse and that overcame my problem. I soon noticed problems with that where it appeared a mouse click wasn't registering. I also about the same time remembered the upper mouse button on the laptop and started using that.
Generally, my upper left works for any left click functions. However I've notice in Google Chrome, I can't select a tab to change to it. If I left click the tab close, it does close the tab.
If I left click on my desktop, I get the right-click menu. The upper left button produces the Windows Start menu just fine but it is rare that I can get the right-click Windows Start menu. When I can, it is only with the upper right button.
What I'm guessing from all this is, everything that is mouse-related must run through the same hardware regardless of the input used (upper buttons, lower buttons or external USB device) and different software handles mouse clicks differently explaining the differences (good, intermittent or never) in response.
Here's another example. To run the Windows calc program from the Start menu Run feature, normally I would left click run and get the dialog with a drop down menu for recent programs accessed thru Run. Let's say I'm using calc. Simetimes this works normally. Other times when I click Run, I get a single option "drop-down" menu with that option being "run" which if clicked THEN takes me to the typical drop down menu of recent programs. Other times, I get a context menu which includes the Run option.
With that in mind, I'm wondering if replacing the touchpad assembly is likely to fix my problems or if anyone has any other suggestions other than to not spill beer on your laptop.
Thanks

hey beeherd,
replacing the touchpad assembly should resolve the issue. however, i am unable to guarantee that it will.
you could try that, or use an external mouse?
do a reinstallation of mouse drivers and use this manual : http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/43y6629_04.pdf .
open the unit and dry it in a dust free room.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

X100e keyboard/mouse issues

Hi Folks,
I've been having trouble with my recently purchased x100e (running Windows 7), and I'm hoping that someone may be able to help me out. I've been looking through the forums and on the web for solutions, but no luck.
Starting a few days ago, I notice that whenever I press a button on the keyboard, a dialog box pops up to ask me if I want to display the Trackpoint Guide. This prevents me from typing anything longer than one keystroke, because the dialog box just comes back when I hit the next key regardless of pressing "Yes" or "No." Additionally, whenever I press a key, the cursor changes from the standard pointer to the scroll icon that would display if I was pressing the middle mouse/scroll button above the trackpad. Furthermore, the middle mouse/scroll button above the trackpad no longer works when pressed.
I have noticed that it is possible to disable the Trackpoint dialog box from coming up by clicking the "do not display this message" option, but the cursor issue persists no matter what. The laptop is hardly a month old. I use antivirus, anti-spyware, etc. I have tried updating the mouse/trackpoint driver and also rolling it back to the originally installed driver, but neither step seems to resolve the issue. I thought that perhaps I had inadvertently changed some of the mouse settings, so I did a factory reset on the machine. Unfortunately, that didn't solve the issue either. I did an extra factory reset just to make sure. I've run anti-virus and anti-malware scans to see if anything would show up, but nothing does. This one really has me perplexed. If there's anyone out there who could offer any advice, I'd really appreciate it.
Thanks!

Hi onlylive2x,
Welcome to Lenovo Forums.
Could you try doing a factory reset without installing any antivirus or antispyware and see if there are any keyboard/mouse issues? This could be some software which is causing a conflict with the mouse drivers.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Annoying mouse issues of cs6 and cs5.5 on mountain lion

Hi everyone,
a couple month ago, a mac pro bought, which has mountain lion. i installed cs5.5 and for a while i have started to fight with mouse issues. illustrator, indesing and photoshop, all of them has mouse lag. photoshop has also freezing when i use stamp tool, and zooming in addition. if the screen moves (when i zoom or move the work to any direction of the window or use the tool which makes the screen move), it freeze and mouse pointer starts to spininnig. sometimes it comes back for a while, sometimes not. and then noticed that, forexample zooming or stamping, if i move mouse over the window, it completes the new view and everything is back normal.
but i can't use stamp tool as normal. it can't work fast and freezes mostly. the mouse lag occurs randomly; not only photoshop, but also indesign and illustrator. i looked at the consol messages and found this:
1/23/13 2:41:55.108 PM WindowServer[203]: _CGXGetWindowOrderingGroup: Operation on a window 0x69 requiring rights 0x5 by caller Photoshop
i googled it and can't found anything. when it freezes on photoshop, consol writes this message. screen never freezes indesign and illustrator. so, there is no messages. only mouse lag occurs on them.
i try to use different combination on photoshop's graphics processor settings. but it doesn't work. now i use photoshop by making the graphic processor off.
after that i installed cs6. but for a while, i met the same problems. i reset the photoshop, erased the preferences files. but it didn't work. after disabling graphic processor, i haven't met the freezing, but mouse issues continue in photoshop, illustrator and indesign.
if you need more info, just ask me.
thank you all.
mac pro 2x2.4 ghz 6-core intel xeon
12 gb ram
ati radeon hd 5770, 1024 mb

hi,
thanks for your answer. i don't know if it's a driver problem, or not. computer came with wireless apple magic mouse. today, i tried the old mac mouse (the ones without wheel). the same result.
if it worked, i wouldn't use this solution. because i do not have to use old mouse. we have met those problems in windows. i NEVER change any hardware for the problems in mac osx. i LOVE apple and its products, but if it worked, there is no different windows.
so, i don't know where is the problem, either in macosx or in adobe products. but i'm really tired of this..
i guess this problem because of the video card: ati hd 5700. their website has not any driver for this card suit for mac os.
appreciate any help..

Wacom or Bluetooth Mouse issues with most recent Beta??

Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

"Slow" Leopard with bonus mouse issues!

I have a Mac Mini at work, and ever since upgrading it to Snow Leopard, it's been driving me insane. I haven't had time to deal with it, so I've gotten used to all the annoying performance issues I'm having. Simply put, Snow Leopard is super slow, or "dopey" as I like to say. Every thing I do (EVERYTHING) happens slowly. Here are a few examples of what I'm dealing with. Switching between apps takes too long, from many seconds to minutes for an app to "wake up" again. When I click Print in Numbers, the print window takes up to a minute to appear, and then another 10-20 seconds before I can actually click print. As an added bonus, the mouse does a couple of "nifty" things on a regular basis. The first thing it does is it "locks" the left-click as if I'm holding down the button. I have to click it again to "release" it, so a lot of the time, I'm clicking the mouse three times just to do one click. The downward scroll also stops working intermittently. Now take the goofy mouse and mix it with the dopey leopard, and you've got yourself a wacky guessing-game! Is the mouse button locked or am I just waiting for the dopey leopard to wake up? Let's click again and see what happens! Maybe the pinwheel will show up, or maybe an open window will move halfway off the screen. Or better yet, maybe I'll delete two emails instead of just the one I wanted to! Weee! And by the way, the mouse issues happen whether I'm using a wired USB Mighty Mouse, wireless Mighty Mouse, or a Magic Mouse. Every once in a while, I get brief glimpses of the real Mac Mini - everything zips along beautifully for a couple minutes - but then it goes back to "dopey" mode. I don't even know who this Mac is anymore. My seven-year-old iMac at home works better than this thing. It doesn't do much anymore, but at least it shows me some respect.

How full is the hard drive?
Try resetting the PRAM. Info here:
http://docs.info.apple.com/article.html?artnum=2238

Mouse issue in all products including photoshop cs5/cs6

Hello! I'm having severe mouse issues with all CS5 and CS6 products.
The mouse will only do single click, and when pressing down on any of the mouse button, nothing functions. So, I'm only able to make a dot with any of the tools! I haven't had this much issues since I installed microsoft products.. please help!!! Also, there's no preference clear in this program, and I've tried the silly option + ctr+shift+ but it didnt work
Windows 7x64
Running trial version cs6

Funny, got the same issue and i can't find anything to help that out. Cyborg RAT9 mouse, Wacom Intuos 4 and even the Apple magic mouse can't make that long click we are looking for. So it cannot be anything else then Photoshop it self. Other Adobe products are working perfect. I'll allready try to reinstall, reboot, cs5, 32 bit 64 bit versions... But noting helps, Photoshop won't work right... like i would buy a +800 euro application that doens't even work as its should
Message was edited by: Blurr_designs

Radius L10W-B keyboard and mouse issues

Hello, I have just purchased a Toshiba Satelite Radius L10W-B notebook less then a day ago, and am exeriancing SERIOUS keyboard and mouse issues, Juts after purchasinng this notebook, after converting it to tablet mode and back to notebok mode, the keyboard and mouse was NON existant for over 4 hours, DID NOT WORK AT ALL. I took it back to the reseller and ofcourse as soon as I tried to show the issue, all worked fine. Now, I have massive latency issues with both keyboard and mouse. The keyboard misses key strokes in almost every 8 keys. I get 1 missed keystroke in every 8 keys pressed when typing, and these are not typos, just absolutely nothing, thyre absolute misses all togeather. This make for alot of retyping and backspacing etc etc. also, the mouse is disabled for about 3 seconds after tying, then snaps back into action. This means when typing and switching to the mouse reasonably fast, the mouse is non responsive for about 1 second which is fairly irretating. This email took over 20 minutes to write, for this exact reason. Im sure this is not normal. I really love this notebook in every other aspect, however these issues just make it plain ususuable. Any ideas? Thanks!

Peter,
thanks for the reply. However im convinced this is hardware related! While I really hope not, Ive tried all solutions posted by others.
It simply seems the keyboard is poor quality and the rest of the laptop is awesome!
I really hope im wrong! But its my gut feeling
Ill try give them a call but not holding my breath.

Jumpy wired Apple Mouse issue solved

I just want to share this with you whom has the same issue I had.
A few weeks ago I got myself a new Mac Mini and I used Migration Assistant to transfer everything (including Applications) from late 2009 Mac Mini to my new mid 2011 Mac Mini. Both Macs use Lion OS. It was a successful migration accept the mouse is acting funny on my new Mac. The mouse behaves jumpy.
The jumpy mouse happens when QuickTime 7 Pro, QuickTime X or/and iTunes are launched. When I quit them, the mouse goes back to normal behavior. I also notice that when any of these applications are launched, CPU usage reaches between 100% and 230% certainly and then drop back to 45% inconsistently. I believed what causes the CPU spike is totally QuickTime related. I realized it’s either its extension, preference or somethings else that needed to be taken care of.
Since I just purchased my new Mac Mini, I was entitled to free Mountain Lion upgrade. So I upgraded and hoping it will resolve my jumpy mouse issue. Somehow, it didn't but I love the new features from Mountain Lion though.
Finally, I decided to delete QuickTime 7 Pro completely. I also deleted com.apple.quicktime.plist in the Preferenc folder. Restarted my Mac. Voilà! Jump mouse stops completely. I launched QuickTime X and also iTunes, it doesn't cause any jumpy mouse issue anymore.
I hope this will help.

I have a Mac Pro 2007 (2,1) at work. Recently I upgraded from Snow Leopard to Lion (10.7.5) which is the last supported OSX for this model. After updating is finished, jumpy mouse symptom appears. I tried deleted all the preference filies but it did not work. To make long story short, it's the video board that caused the problem.
About a year ago I upgraded my video card to ATI Radeon HD 5770 Graphic Card. It works fine on Snow Leopard but not on Lion. On Lion, not only it causes jumpy mouse but also screen flickering on second monitor every few minutes or so.
So I uninstalled the card and put back the original OEM video card that came with it. The jumpy mouse stops and everything is back to normal.

Sticky mouse issue

On oracle forms application, If I click to another item with my mouse
cursor there is no navigation, more so when I am on a multiline text item. The other item is MOUSE NAVIGABLE.
I am on Form Server 10.1.2.0.2. This version is supposed to be a version that has an patch/fix for this mouse issue(Bug#301874).
Any help guys?
Thanks
Vijay

By default, whenever you have an item based on a long/clob column is it created with a query allowed property of 'No'?
I created a simple form to replicate the issue, with no success. I am suspecting this mouse issue might have more to do than just the item being multi lined/clob/long item, cos I have an on mouse double click event associated with the item which brings up an text editor
Edit_TextItem(50, 100, 500, 300);

Serious mouse issues with GTK

my mouse and touchpad for my laptop have always worked without any sort of problem. i recently switched to openbox from gnome and it's been a wonderful experience so far. i tried cleaning out unnecessary gnome stuff and installed KDE to toy with it a little. needless to say shortly afterwards i ditched KDE and switched back to openbox, only to discover my mouse being screwed. i can move the cursor around and such but after a few seconds of running my ability to click and right-click is gone. i tried re-installing gnome completely hoping it might effect it and logged into a gnome session instead but the problem is persisting here as well. if i am using my mouse in a window, i cannot select anything on the panels with it whatsoever without repeatedly right clicking in the window close to the panel and then clicking the panel. and whenever i have the panel selected i can interact with it fine but cannot switch over to any windows. it's making me believe there's something going on with the mouse thinking it's "stuck" on the panel or window so clicking outside of it is rendered useless. i really don't know, i've tried searching online and such for any help on the topic but could not find anything and this is my final resort before going completely mad. any help would be greatly appreciated.
EDIT: i've tried toying with settings in gnome in regards to the mouse and stuff, basically just doing anything i possibly can and while using a window from the control panel for the mouse and clicking within it i started opening a ton of control panel items (appearance, etc.) leading me to believe it's definitely an issue of the mouse being stuck in a window or something.
Last edited by hustletrees (2010-07-01 04:11:28)

Your mouse is handled by xorg, so you need to make sure it's configured correctly. "mouse issues with GTK" simply doesn't make any sense.
My guess is that somewhere in the middle of changing WM/DE, you also did a system upgrade (a good thing) without reading Arch news (a bad thing), so you now have xorg 1.8 and you need to change your config accordingly.

Touch pad mouse issue synaptics Touchpad v7.5

I have recently upgraded to windows 10 and i have the issue of when I press a key on the keyboard the mouse freezes the normal thing to do here is to disable palm checker (worked on windows 8) However now this dose not work I press a key i can move the mouse for one stroke then it freeze, how do i fix this is it a keyboard issue a mouse issue or a known issue

, Hello and thanks for posting on the HP support forums. The only options with this problem are as follows. Wait for Microsoft to update the list of drivers and software patches over the next little while or roll back to windows 8.1. With any operating system to update the first week it comes out is a risk as to what is going to work 100% or not. When dealing with notebook some of the hardware takes custom drivers and software and the general functions may work but not all of the extra functions. I hope this helps. Thanks again for the post and have a great day.

Late 2013 13" MBPr unresponsive (not keyboard/mouse issue)

Hi all,
I am running a 2013 13"MBPr with 1TB SSD, 16GB RAM and 2.8i7.
I have updated the firmware to fix the keyboard/mouse issue.
My problem is the computer hanging or unresposive when using other programs.
I thought this was a problem with Chrome which I use for browsing as I had a simialr issue with my 2010 MBP 15".
But yesterday it hung in Mail.
Apple Diagnostics was fine.
I have tried uninstall and reinstall of Chrome. I run a few extensions but have reduced these as much as possible. Only use Adblocker, 1password, Papers and Quidco apps.
I will try to reinstall mavericks and see how it goes. Hopefully I get some luck.
Anyone have any thoughts?
Thanks

Thanks Clinton,
Well It came with mavericks and I will reinstall tonight to see if it helps.
Called apple today and they suggested a reinstall.
In the mean time I have put a refund order thorugh for this computer and reorded it. So I guess this will rule out hardware issues. The only issue is the same spec computer is only expecting delviery between 9th to 16th December!!!
So may be without a computer for a while.
Happy to read that you suggest only perfection as this is what I expect.
Cheers

OSX 10.10.3 mouse issues

Hi!
Seems like 10.10.3 introduced some issues with mouse drivers.
My Kensington Slimblade trackball doesn't work with the Trackball drivers, as i get sporadic registered clicks etc. and occasional lock ups.
Seems like logitech software is not working either with 10.10.3.
Apart from that there seems to be a ton of other issues introduced with this update.
I couldn't care less about the new Photo app, it's crap and useless to me.
I just need my computers for work, Apple really dropped the ball with this update.

Yes, something drastically changed with 10.10.3 regarding mice. I've always used Logitech mice (for over 30 years now). I just like the feel of them in my hand better than any other brand. The same Logitech Control Center drivers that have always worked without issue in any version of the Mac OS prior to Yosemite are now having trouble. Logitech just released 3.9.2 with Yosemite support about a week ago, and that one isn't working, either. Does it have something to do with Yosemite's memory compression? Can't say.
Anyway, I have two bugs reports into Apple. The first being that since Yosemite came out, the Logitech drivers stop responding. If you can get to the Activity Monitor with a second keyboard, since the main one also usually stops responding, you can see the Logitech driver is dead. The cursor is completely frozen and the only way out of it it is to use keyboard commands to quit apps that are open, then restart the computer.
The second bug came with 10.10.3. The center wheel button assigned as a double click doesn't work if the Finder is the foreground app. You have to hold the Option key in order for it to work.
I also removed Logitech's driver and installed the 30 day demo of SteerMouse. Works perfectly. The assigned double click works as it's supposed to. As far as freezing, I don't know yet. I uninstalled SteerMouse and put the Logitech 3.9.2 software back on as Apple's engineers asked me to capture log data when it freezes. It's pretty random and far apart, so may take a couple of days for the mouse to suddenly decide to take another permanent vacation.

Suspend to RAM/HDD causes strange mouse issues in KDE

I suspect that this problem is related to something taking focus and not releasing it, but I'm having a very hard time identifying what, and I'm not sure on my next steps of investigation.
I have a newly installed Fujitsu Lifebook P701 laptop, set up with KDE (installed with KDE-Base). The system will Hibernate perfectly, either to HDD or RAM. It will come up correctly and get back to the login screen. I am able to log in fine and the mouse always responds correctly here. Once I have logged back in, the mouse responds correctly for a few seconds (this amount of time is variable). After these few seconds the mouse will move on screen, but when clicking it either doesn't respond at all, or responds in an unexpected way (depending on where on screen is clicked). Some examples of this behaviour:
1. Click on the K button in the task bar - Either the K menu opens, but nothing in the menu can be clicked; or the menu doesn't open at all.
2. Click on programs in the task bar - Either the program will maximise/minimise, but doesn't respond to right click; or the program doesn't respond at all (the response can be both for different programs).
3. Click on a link in web page - no response
4. Click anywhere else on a web page - either no response, or text is selected (from a single click).
5. Click on the top of a window - the four arrow cursor immediately comes up and the window starts to move, clicking again doesn't release the window.
Investigation done so far:
1. Removed every activity that is running (task manger, notification etc), the only one not removed so far is the task bar itself.
2. checked .xsession-errors for obvious errors (none found).
3. Used kwin --replace, the issue still occurs after this is run.
4. Closed every program that was running and tested.
5. Read around on the KDE and Arch forums to find anything similar, I can find a couple of posts that are similar, but no solutions as yet.
6. Done a full upgrade to the system (this was a couple of days ago now).
Investigation I've not done so far but am planning on doing:
1. Creating a new user - As the issue started on the first hibernation of the laptop I don't think this will fix it, but it's worth a go.
2. Installing another WM to prove this is a KDE issue (I'm pretty sure it is and I don't have a huge amount of space as I installed an SSD).
I can get the laptop to work again by restarting KDM (systemctl restart kdm) so it's fixable, but I'd really like to get to the bottom of it.
I've posted to Laptop fault as I'm not 100% sure this is a KDE issue, but I suspect it will be (it certainly seems to be similar to other issues that have been identified as KDE specific).
What are your next recommended steps of investigation? I'm really stumped on what could be causing this. As I say at the top I suspect it's a focus issue but I have no idea what is stealing focus and how to find the culprit.

I have similar problems since the last kernel upgrade: Prior to that everything on my laptop worked fine. After, when I close the lid (set to "sleep") the screen returns, the mouse appears to work, clicking on the panel often does not work, the menu may or may not pop up......
H/W path Device Class Description
===================================================
system HP Pavilion dm1 Notebook PC (VY474EA#ABU)
/0 bus 3663
/0/0 memory 1MiB BIOS
/0/4 memory 5GiB System Memory
/0/4/0 memory 1GiB SODIMM DDR3 Synchronous 800 MHz (1.2 ns)
/0/4/1 memory 4GiB SODIMM DDR3 Synchronous 800 MHz (1.2 ns)
/0/a processor Core 2 Duo
/0/a/b memory 1MiB L2 cache
/0/a/d memory 32KiB L1 cache
/0/c memory 32KiB L1 cache
/0/100 bridge Mobile 4 Series Chipset Memory Controller Hub
/0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4
/0/100/1a/1 usb3 bus UHCI Host Controller
/0/100/1a/1/1 input USB Receiver
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2
/0/100/1a.7/1 usb1 bus EHCI Host Controller
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller
/0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1
/0/100/1c/0 wlo1 network BCM4312 802.11b/g LP-PHY
/0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2
/0/100/1c.1/0 enp3s0 network RTL8101E/RTL8102E PCI Express Fast Ethernet controller
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1
/0/100/1d/1 usb4 bus UHCI Host Controller
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2
/0/100/1d.1/1 usb5 bus UHCI Host Controller
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3
/0/100/1d.2/1 usb6 bus UHCI Host Controller
/0/100/1d.2/1/2 communication HP Bluetooth Module
/0/100/1d.3 bus 82801I (ICH9 Family) USB UHCI Controller #6
/0/100/1d.3/1 usb7 bus UHCI Host Controller
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1
/0/100/1d.7/1 usb2 bus EHCI Host Controller
/0/100/1d.7/1/4 multimedia HP Webcam-50
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge ICH9M-E LPC Interface Controller
/0/100/1f.2 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Controller
/0/100/1f.6 generic 82801I (ICH9 Family) Thermal Subsystem
/1 power PT06055
$ uname -a
Linux hp-dm1 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64 GNU/Linux
Andrew

Mouse Issues

Similar Messages

Maybe you are looking for