Mouse keeps loosing connection

Happened once or twice and I ignored it but it happens 3 or 4 times a day now

One makes the device a favorite by going to system preferences>bluetooth. Highlight the device. If details are not displayed, click on the little gear and "show more info." Click on the gear again and make the device a favorite.
Barry

Similar Messages

Mighty mouse keeps loosing connection

so iv had my mighty mouse for over a year and its been used with numerous laptops. i bought a wireless keyboard there a few months ago. i mainly use my mbp as a desktop. yesterday i decided to lug in a 19" dell external monitor. since i plugged that in the mouse was slow and every minute or two (literally) it would come up with the lost connection image. The keyboard works fine. Actually now that i think bout it while i was using the monitor for maybe the first few hours this didn't occur. I did a search of the forums and didn't find much except the relation to the monitor. i unplugged it and the issue has stopped. i tried a different monitor and it also happened. Any ideas anyone?
ok just there 2 minutes after i posted with no monitor plugged in it did it again...
Regards
Message was edited by: alex.lyons

anyone

My wireless mouse for my iMac keeps loosing connection. Started after I was having problems with computor not waking up and I put the the setting to "never". Anyone having same problem?

My wireless mouse for imac keeps loosing connection. Started after I was having truoble with computor not waking up and I put the setting to "never sleep". Any suggestions?

If it's an Apple mouse, make it "Favorite" in Bluetooth preferences.
If it's not, the same thing might help, too, but if the problem continues it could be a driver issue (possible incompatibility with your OS X version).

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

HT2845 why does my wireless mouse keep losing connection?

Good morning,
My wireless mouse keeps losing connection...my batteries are at 100% and the "discoverable" option is checked off. Why is this happening?

Hi:
PRAM=parameter random access memory - reset like this:
http://support.apple.com/kb/PH11243
SMC=system management controller reset like this:
http://support.apple.com/kb/HT3964
Sometimes resetting these "fixes" odd problems - and it cannot hurt.
To make a device a favorite, go to system preferences>bluetooth. Highlight the device. If detailed information is not shown, click oin the little gear>show more info. Then click on the gear again and make the device a favorite.
Barry

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

Keep loosing connection

why do I keep loosing connection between laptop and printer it works fine after I reload printer

What printer?
What router?
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

X4000b Bluetooth Mouse constantly looses connection

Hello there
My new Bluetooth Mouse constantly looses connection to my Asus Transformer Windows TabletPC. So the mouse Pointer stops moving and can be moved again after 20 seconds or so. Any suggestions on how to solve this?

Try resetting the PRAM and SMC.
Barry

HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

HT4144 Last April I bought a new a iMac but I didn't need to use the magic mouse until few days ago. It drives me crazy. I have changed so many butteries but keeps loosing connection. I haven't it on the wall yet but I might be close to. It has to be fau

Why a magic mouse divours batteries? Why does it loose connection evey few minutes? Can I have it replaced?
<Edited By Host>

Hello again,
Just idly thinking about your post mentioning you had only had it for 4 or 5 days. Such a problem rarely gets better with time, were you suggesting you hoped it would improve, in other words?
I can see you are now aware of the packing option but if you are using Apple, Duracell or Energiser batteries packing it out should not be necessary. Any other batteries I cannot speak for.
One buys Apple because of its' reputation against other products; you will be helping to maintain that by asking for an exchange. You will feel better for it, and speak better of it.
Forgive me if the opinion is a touch biased; I've been very lucky with my iMac purchase and the only exchange I ever made only enhanced my view of Apple; it went so smoothly.
Thank you for the star.

Why does my mouse keep losing connectivity

My magic Mouse (came with the system) keeps losing connectivity. It seems that whenever the mouse has a period of inactivity such as when I am using the key board, it loses connectivity and I have to double tap it (two fingers) to get it to reconnect. Battery is >80%. Is this normal or is there a setting that can insure it stays connected? I appreciate any advice even if it is I have to put up with this annoyance. Thanks.

BDAqua
Thanks for the response. My WFi is a Linksys E2000. Because of the number of messages in the Console I will have to wait until the next time I lose connectivity and then check for messages in Console to see if there are any clues to what is going on.

Nexus keeps loosing connection, any ideas???

Just got my Nexus yesterday but it keeps loosing data connection, wifi does the same. Help!

Hi,
If this is to the AIM server and you are using the SSL option try it without the SSL option ticked.
8:30 PM Tuesday; November 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Airport express keeps loosing connection to Time Capsule

For several years I have had no issue with mt Airport Express staying connected to my Time Capsule/router. Now 2 of my Airport Expresses keep loosing the connection and flashing yellow. I have done the resets where I press in the little button on the bottom while plugging the AE back into the power source and reconnecting through Airport Utility and that will do the trick but after a short time the flashing yellow lights will go back on.
Would it help to turn off the router, rest all the AEs? It is so frustrating to keep loosing the connection and nothing else has changed; e.g. the AEs are all in the same place.

Same thing here! I didnt have the problem with airport express until I update the os from 10.6.2 to 10.6.6. I have been calling the apple support and they couldnt help (or thou sounded like they knew for that particular problem). I got from my work MacBookPro and same thing happen. I hope that apple will read this and just want to tell them that this is my 10 computer made by apple and God knows the last one! First of all they made the the fireware with the bad chipsets so I have to but extra cards and then airport. I cant connect at all to any wifi and have to put the cables on the floor from the wifi router to the ethernet input which is more than 10 metres. Apple sort this asap!!!!!!!!!!

WLC526 and two AP521 problem. Clients keep loose connectivity

I have a UC520 in a building with several IP phones. We installed a WLC526 and two AP521's for seamless roaming of cordless phones. THe phones work great with no issues. When I am running a ping test on a wireless laptop, i keep loosing packets. It looses connectivity randomnly. DHCP is given via Windows 2008R2 server. Have a cisco 2948 switch also in the mix. THe AP's are connected directly to teh front of the UC520. Is there something in the configuration I am missing? Why do phones work perfectly and not data?

You do a ping from a laptop to another laptops?
The WLC and the APs you have are really old. It will not be strange if you find the client you are using having problem with the APs/WLC that you have.

Browsers and Mail keep loosing connection and reconnecting randomly.

Connected to a wifi network that has always worked fine.
Only change is Yosimite upgrade.
Browsers intermittently report no network connection, then make connection seemingly randomly.
Mail keeps taking accounts off line in spite of always being connected.
I do have 16 gigs of ram.
Does anyone know what has happened and how to fix?

The only change has been switching to Yosimite.
The wireless diagnostic says "Basic failure..." contact apple support.
Other devices and computers are connected to same wifi without a problem.
The wifi network is not the issue, something has changed in how the OS is connecting.
The browsers, (Safari and Firefox) will loose connection and say not connected to internet from onwe moment to the next.
A page can be refreshed then a new will report that I am not connected to internet, then after a few attempts to try again, it works.
Mail also seems to loose connection and asking if I want to connect.
The wireless and mail and all browsers have worked with out a problem for years.

Mouse keeps loosing connection

Similar Messages

Maybe you are looking for