Mouse Move on the column Chart

Hi all visitors
I have created one crystal report and in my report i have created one column chart.
but i don't show the value on the column chart,however, when i move mouse on that column chart,
it will show the value.but in crystal report server,when i move the mouse on the column, it doesn't show the value like crystal report.
Anyone know about this how to show the value on the column when mouse move in crystal report server?
Please help me for this.
Best Regards,

Unfortunate Tool tip doesn't work with CR Charts.
Probably there may be some  trick that will configure to achieve. But I didn't came across till now.

Similar Messages

  • Missing column in the column chart - is it the selector's fault?

    Hi folks, thanks for bearing with me here:
    I'm working on fixing some issues on a dashboard that someone else has set up (and there's no way for me to reach that person).  One of those issues is that one of the columns in a column chart does not display on the dashboard when exported.  The column chart is pulling the data from the correct cells, so the problem doesn't seem to stem from there.
    I thought I got to the bottom of it when going over the scorecard.  The range used for its source data cuts off before it reaches the data for the column in the chart that doesn't show up in the exported dashboard.  However, when I adjust the range for the source data the resulting exported dashboard turns out an entirely blank column chart (even weirder, changing the source data back doesn't seem to fix this; I had to simply start back from my prior save state to reverse the blank chart).
    So am I even on the right track here?  And if not, any ideas on what's keeping that column from showing up?

    Thanks Ameet, I tried out the table as you said and the data for the column and the vertical progress bar were missing from there as well.
    It turns out I was correct about the scorecard's source data being to blame, and that adjusting it to include the fields in the spreadsheet that correspond to the missing graphics was the right course of action, the problem was something with my computer; I sent the file to another computer and adjusted the source data there, and it worked fine.
    It puzzles me why the edits wouldn't take on my computer (after being exported).  The only thing is maybe I need a newer version of Flash, but I have 9.0 r45 which should be enough.
    Edited by: xcelsiusnoob on Jun 23, 2011 2:16 AM

  • Adding mouse listener to the column header of a column in a JTable

    Hi
    I want to add a mouse listener to the column header of the 3rd column in a JTable. I dont find any appropriate method to do this. The code I have written to do this is below. But on using this code, the mouselistener is invoked if I click on any column header. Can anyone please help me to fix this.
    table.getTableHeader().addMouseListener(new MouseAdapter() {
    public void mouseClicked(MouseEvent e) {
    /* some actions */
    }

          table.getTableHeader().addMouseListener(new MouseAdapter(){
               public void mousePressed(MouseEvent me) {
                   int tableColumn  =table.columnAtPoint(me.getPoint());//it returns the column index
            });

  • How to add two X Axis in the Column chart?Need Help

    Hi,
    I have a requirement to add two X axis in the SSRS column chart.Can someone please help how to add two X axis. I tried the secondary axis for horizontal axis but current x axis is shifting to other side, second X axis is not coming.
    Regards
    Jon

    Hi Jon,
    According to your description, you want to add secondary X axis for one series in a column chart, right?
    The secondary axis is useful when comparing two value sets with two distinct data ranges that share a common category. In Reporting Services, it’s not supported to create two X axis for one series. We can create secondary X axis when there are two series
    in a column chart. As we tested in our local environment, we can add secondary X axis for specific series. Please refer to the screenshots below:
    So I would like to know what’s your exact needs about creating two X axis for one series. If possible please share some detail information about your data and expected looking of the chart.
    Reference: Plot Data on a Secondary Axis (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Mouse move to the edge of the tabitem and this will trigger mosueenter and mouseleave event again and again

    I have registered the tabitem mouseenter and mouseleave event, and when user move the mouse in tabitem a block will follow, if mouse leave the block will return to the original position. Now I meet a weird thing, when I MOVE THE MOUSE TO THE EDGE OF TABITEM
    CAREFULLY, the block will follow and return again and again. Have you ever meet this problem?
    void fe_MouseLeave(object sender, MouseEventArgs e)
    TabItem item = this.SelectedItem as TabItem;
    if (item != null && item.IsVisible)
    //block return to origin position
    BeginAnimation(item);
    void fe_MouseEnter(object sender, MouseEventArgs e)
    TabItem item = sender as TabItem;
    if (item != null && item.IsVisible)
    //block go to the mouse position
    BeginAnimation(item);

    The MouseLeave and MouseEnter are routed events and this means that your event handlers will get invoked whenever a child element of the TabItem raises any of these events, for example when the mouse enters and leaves an element that is part of the control
    template of the TabItem.
    You also need to understand that the entire TabItem is not a single UI element. It is for example made up of a header and a content panel and this means that there will be at least one MouseLeave and one MouseEnter event raised when you move the mouse pointer
    from the content panel area (which is made up of some elements) into the header area (which is made up of some other elements) and the other way around.
    You need to reconsider your approach here because the MouseLeave and MouseEnter routed events will be fired even when the mouse pointer remains inside the area that you consider to belong to the single TabItem.
    Please remember to mark all helpful posts as answer and then start a new thread if you have a new question. Please don't ask several questions in the same thread.

  • I am using a mac os10.6.8 with 2 gig of ram and its keeps freezing.  the mouse moves but the machine is frozen.  If I should down and restart the machine runs fine for a while and then freezes again.  any suggestions?

    I am using a Mac with OS X 6.8 it has 2 gig of ram and it keeps freezing.  Tlhe mouse will move but the machine is frozen, if i shut down and restart the machine is fine for a while. any suggestions as to what to check or what could be causing this?

    Run Disk Utility to check the SMART status of your hard drive.

  • X200t screen flickers when mouse moves off the right screen edge in secondary landscape orientation

    I just got my 1st  lenovo tablet pc (x200t multi-touch w7 32bit). However, my first experience is not so smooth.
    I am having a screen flicker issue in secondary landscape mode (not the default landscape mode) whenever I move my mouse beyond the right edge of the screen. From the symptom,  it seems like Windows 7 didn't stop the mouse from moving out of the screen, and hence  Windows 7 tries to redraw everything from the top up to the cursor repeatitively (i.e. flickering)
    In other orientation, the mouse is actually stopped before moving out of the screen because I can still see the edge of the cursor when I move to far right. 
    Does anyone know of a solution?  If not, I would like to know if anyone else experience this issue. You can reproduce this by
    1. rotation the screen orientation until buttons on the screen is at the top of the screen (i.e. the secondary landscape orientation)
    2. move your move beyond the right edge of the screen.
    3. screen starts to flicker
    I have updated all the drivers and software via Windows Update and Lenovo ThinkVantage.
    ThinkPad BIOS Update 3.11-1.04
    ThinkPad Power Manager 2.05
    Lenovo Fingerprint Software for Windows 7 32 bit 3.3.0.58
    Lenovo thinkVantage Toolbox (32-bit) 6.0.5449.31
    Here is my configuration 
    Intel Core 2 Duo SL9400 (1.86GHz, 6MB L2, 1066MHz)1
    Genuine Windows 7 Professional 3212
    12.1" Enhanced Multitouch WXGA LED Panel with Wide viewing Angle
    Intel Graphics Media Accelerator 4500MHD
    2 GB PC3-8500 DDR3 SDRAM 1067MHz SODIMM Memory (1 DIMM)8
    TrackPoint
    160GB Hard Disk Drive, 5400rpm4
    Integrated Bluetooth PAN
    Intel WiFi Link 5100 (AGN) with My WiFi Technology10
    Integrated Mobile Broadband - Upgradable65
    ThinkPad X200 Tablet 4 Cell Li-Ion Battery60
    7448: 1 Year Depot Warranty - TopSeller7
    Thanks

    Could you be a little more specific?  I took that section out of my CSS file but the problem persists.
    Thank you.
    Sincerely,
    Michael Yannetta
    Mio Web Designs
    530-414-3313
    [email protected]

  • My iMac screen is frozen, yet the mouse moves across the screen. I can not open anything up. I have restarted it a few times.

    The mouse keeps turning to spinning wheel. I think I have too many photos open on the desktop but I can not move them as the mouse can not pick them up

    If the Finder is bogged down by too many items on the Desktop, you may be able to free it up by hiding the preview icons. Click anywhere on the Desktop to select it, then press the key combination command-J, or select
    View ▹ Show View Options
    from the menu bar. In the dialog that opens, uncheck the box marked
    Show icon preview
    You may now be able to move the items off the Desktop. Otherwise, start up in safe mode and try again.

  • Hi all, my mac book pro boots up, but my track pad operation is strange, cannot click on anything, although it moves around screen ok. Cannot launch anything, nor close anything. Cannot get task bar to pop up either with the mouse movement.

    Hi All,
    My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
    I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
    I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
    Cheers
    Jazzy
    Message was edited by: Method TV

    Hi All,
    My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
    I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
    I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
    Cheers
    Jazzy
    Message was edited by: Method TV

  • How to implement DataTable where we can move the columns arround

    Hi,
    I want to implement a functionality where my data is shown in a table. I need to have a sort functionality, pagination functionality and also provide a functionality where users can resize the columns, move arround the columns. Just like windows explorer where we can sort and also move arround the columns. Also need to keep user profiles i.e. next time when a user comes in sees the same arrangement of columns and look & feel. Are there any open-source components I can use if not what is the best way to implement this functionality.
    Thanks

    Any feedbacks

  • Controling the MC or animation with the mouse moviment

    Hi folks... how are you?
    I need some help... I did a cube on the 3DMAX and exported as
    SWF and imported on flash... the animation i've made on the 3dmax
    is working... my question is... there is a way to control the cube
    moviment? like when mouse move to the right the cube moves to the
    right and same for left side? i put a picture on each cube's face
    and planing to use as a kind of menu.
    Tks a lot

    Any way we can see this cube? Do you have this uploaded
    anywhere?
    If you are using the imported cube as a symbol, and give it
    an instance name, you should be able to add a few lines of code to
    move it with the mouse. But it doesn't sound as though this is what
    you want. You want to control the full rotation. Maybe you need to
    use your imported swf as a template for redrawing the cube in
    Illustrator/Flash.

  • Overlapping data when more data column chart SSRS

    Hi guys,
    In my ssrs report the column chart  display is not good when more number of datas are viewed.How to overcum this issue
    I searched more on this issue no good solution found.
    I attached screenshot for this report,
    any suggestions pls
    Thanks,
    R.B

    Hi R.B,
    I can reproduce the issue in my local environment. If there are more column data with adjacent values in the chart, the label will be overlapped due to the insufficient space. In this scenario, there are several properties you can use to try to get the labels
    to fit better. Click the data point to open the Properties Windows, then go to the SmartLabels node.
    Expand the "NoMoveDirections" node. This will give us a lot of directions that we can use to restrict the directions that the labels can move in. We can try to change directions to see if it helps.
    Try to enlarge the chart size and use the method below to adjust the column size, it will free up more space to contain the label.
    http://www.bidn.com/blogs/ChrisAlbrektson/bidn-blog/1832/ssrs-adjust-bar-chart-width
    If we want to remove the black arrow, we can refer to the following thread:
    http://social.technet.microsoft.com/Forums/en-US/e3019086-4f72-4898-ba86-2e7c97c8fae4/ssrs-series-lable-overlaping-issue?forum=sqlreportingservices
    Alternatively, we can use Tooltip property to instead of actually displaying. Type the same expression with Value field in the Tooltip property.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SSRS Column Chart Design Returning values in a format different from SSRS -SSAS Query Designer

    Hi All,
    I have an SSAS cube Measure Group with Multiple Measures that I am attempting to return on one SSRS report and reflect the 
    values using a ssrs column chart.
    My Measure Group (Patients).
    Measures:
    PatientsOnMeds
    PatientOnRelapse
    PatientsCounseld
    TotalNumberOfPatientsRegisterd
    NewlyRegisteredPatients
    HealthPersonelTrainef
    Demension:
    Time (Year) :filtered to 2012 & 2013
    In my SSRS query designer I have filtered the above Measures with Time Dimesion year 2012 & 2013
    and the data is returned as :
    Year |PatientsOnMeds|PatientOnRelapse|TotalNumberOfPatientsRegisterd|NewlyRegisteredPatients|
    2012 | 700          | 526            |  25                          | 456
    2013 | 245          | 245            |  15                          | 70
    Now the problem is when I return this data on the column Chart it's in messed up mesh
    On the chart Data:
    -Values :Measures
    -Series Group: Dimension
    The report values are returned in multiple columns for each value segmented by year i.e year 2012,Year 2013.
    I want a single column for each Measure (value) for each single year and The chart axis to reflect the measures(values) 
    instead of grouping values according to series group.
    instead the legend returns:
    -Year A -PatientsOnMeds
    -Year A -PatientOnRelapse
    -Year B -PatientsOnMeds
    -Year B -PatientOnRelapse
    I would like the legend to reflect on -Year A,Year B in color code that will be highlighted in the column values.
    Please point me in the right course if you can.Your insights are highly appreciated.Thank you in advance.

    Hi Charlie, 
    Thank you for your kind response. 
    In actual I want the legend to show:
    -2012
    -2013
    And the bottom axis to show:
    PatientsOnMeds
    PatientOnRelapse
    PatientsCounseld
    TotalNumberOfPatientsRegisterd
    NewlyRegisteredPatients
    HealthPersonelTrained
    Indicating in color code for Year 2012 and Year 2013.
    This the challenge that I am struggling with.I hope you understand my scenario.
    It aint easy.

  • Get a quarter out of data for a column chart

    Who can help me with this challenge?
    I want to create a column chart with four quarters in the current year and one column with the rest later in time.
    One project can have multiple output data. They are separated by an ;
    The notation of the outputdata can be a date (d-m-yyyy), a month (mm-yyyy) or a quarter (Q1-yyyy).
    This is by example the available data.
    Project              outputdata
    Project 1           1-4-2014
    Project 2           03-2014;Q4-2014;Q2-2015
    Project 3           25-09-2014;Q1-2015
    The data I want to get for the column chart is:
    Project              outputdata                    columnchart
    Project 1           1-4-2014                       Q2-2014
    Project 2           03-2014                        Q1-2014
    Project 2           Q4-2014                       Q4-2014
    Project 2           Q2-2015                       2015 and later
    Project 3           25-09-2014                   Q3-2014
    Project 3           Q1-2015                       2015 and later
    I hope that someone can help me in the right direction.
    Thanks in advance,
    Els

    Adding to what Frank has already suggested, try something on these lines:
    Something like this?
    SQL> ed
    Wrote file afiedt.buf
      1  with x2 as(
      2     select 'proj1' proj, '1-4-2014' op, NULL chart from dual UNION ALL
      3     select 'proj2' proj, '03-2014' op, NULL chart from dual UNION ALL
      4     select 'proj2' proj, 'Q4-2014' op, NULL chart from dual UNION ALL
      5     select 'proj2' proj, 'Q2-2015' op, NULL chart from dual UNION ALL
      6     select 'proj3' proj, '25-09-2014' op, NULL chart from dual UNION ALL
      7     select 'proj3' proj, 'Q1-2015' op, NULL chart from dual
      8  )
      9  select
    10     proj,
    11     op,
    12     case
    13     when regexp_like(op,'((\d{1}|\d{2})-(\d{1}|\d{2})-(\d{4}))')
    14     then
    15             'Q'||TO_CHAR(TO_DATE(op,'dd-mm-yyyy'),'Q')||'-'||TO_CHAR(TO_DATE(op,'dd-mm-yyyy'),'yyyy')
    16     when regexp_like(op, 'Q\d{1}-\d{4}')
    17     then
    18             CASE
    19             when SUBSTR(op,-4,4) > 2014
    20             then
    21                     SUBSTR(op,-4,4)||' and later'
    22             else
    23                     op
    24             end
    25     when regexp_like(op, '\d{2}-\d{4}')
    26     then
    27             'Q'||TO_CHAR(TO_DATE(op,'mm-yyyy'),'Q')||'-'||TO_CHAR(TO_DATE(op,'mm-yyyy'),'yyyy')
    28     end
    29* from x2
    SQL> /
    PROJ       OP                   CASEWHENREGEXP
    proj1      1-4-2014             Q2-2014
    proj2      03-2014              Q1-2014
    proj2      Q4-2014              Q4-2014
    proj2      Q2-2015              2015 and later
    proj3      25-09-2014           Q3-2014
    proj3      Q1-2015              2015 and later
    6 rows selected.

  • How to reset drill-down column-chart based on map-chart?

    Hi guys,
    I'm facing pritty common issue while designing one of my dashboards.  Let me describe a little bit  more:
    1. I have some data extracted from BW using Query as WebService into my Xcelsius spreadsheet.
    2. I have map-chart - regions for some country.
    3. I have a drill-down column-chart, which displays data for a selected region.
    At the beginning column-chart displays results for entire country (which, in fact, is not exactly drill-down). The issue I'm fasing is, that in case I select any region and the data is drilled-down into my column-chart, I have no option to show data for the entire county in the column-chart anymore (the only one way is to restart the report).
    Are there any possible way to do this, or am I doing a design error while displaying data, which is not drilled-down, into a chart which is intended to display drill-down data only?
    Any help would be highly appreciated.
    Thanks in advance.
    Ivaylo Mutafchiev
    Varna Business Services
    Project Manager BOBJ

    Ivaylo Mutafchiev,
    I understand your problem now. So your column chart data which is coming from the QAAWS query should be having a prompt which is bound to some cell in excel. and your map might be passing the values for prompt isn't it? in your case the map might be passing a region.
    All you need to do is put the prompt in the web service for region as a optional prompt. Now pull in a check box or a Push button(name it as reset or something.). while binding the data to the check box or push button (source data) bind it to a blank cell. when user clicks on it , it passes a blank vlaue to the region(this is ur input for region) which will inturn makes the prompt optional for the region web service. which should pull all the data for all the region.
    The whole idea lies in somehow passing a blank cell to your  web service whose region prompt is optional.
    Thanks,
    Karthik

Maybe you are looking for

  • Use of UTL_FILE package

    Hi, I am trying to use the following command: UTL_FILE.FOPEN('/HOME/SCMS/DUNNING/OUTPUT/','DUNNING_ACCT_YYYYMMDD.PSC','W'); however i get an error invalid directory name. can anyone please advise how to assign the location as the name of a local dire

  • Motion 3 quits "ozone plugin"

    So I'm working in motion 3 and all of a sudden it quits and tells me the 'ozone plugin' could have caused this. I have been searching online for hours and have found that this is a common issue with motion. I have tried many different things. I have

  • Assigning of Classes to superior classes Using SXDA_Tools...Urgent

    Hi All, I have a requirement in which i have to create classes(Material classes, CL01) and subclasses for them. In the second step i will have to assign the created sub classes to their respective superior classes. I could create classes using batch

  • N93 - set date and time every time

    Hi there, I'm new here but I've got a frustrating problem with my N93. Every time I switch the phone off, I have to re-enter the correct time and date. This is frustrating because when the phone is switched off, the alarm won't function so I have to

  • Can't install email on new phone, its asking for port and things like kind of account this is POP3?

    when I go to add an account it only gives me options of FB, twitter, google, Samsung Microsoft exchange. If I go into 'email' it asks for POP3 server and port. I don't understand these things, would like to get emails on my phone.