Mouse Move Operation in 10g

Hi Guys,
We are doing migration of Forms from Oracle 6i to 10g.
In 6i One form contain Mouse Move Trigger.
Let me know,Whether Mouse Move Option will work in Oracle 10g ?
Otherwise,How to handle this type of trigger in Form.?
If it work fine then,Tel me the Solution how to use this?
Thanks,
Gany

Hello,
The Oracle Forms OTN Forum is here : Forms
Regards

Similar Messages

Hi all, my mac book pro boots up, but my track pad operation is strange, cannot click on anything, although it moves around screen ok. Cannot launch anything, nor close anything. Cannot get task bar to pop up either with the mouse movement.

Hi All,
My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
Cheers
Jazzy
Message was edited by: Method TV

Hi All,
My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
Cheers
Jazzy
Message was edited by: Method TV

CS3 Ext. Vista 64 jerky mouse movement

Hi there,
I have a huge problem with my 32 Bit Photoshop CS3 Extended under the operating system Windows Vista Business 64 Bit and don't know if this is a known problem or has to do with the 64 Bit or something. I don't know what to do more so I ask here in hope of some help.
The problem: When I use the f-key to switch to a mode where the image uses the whole space behind the tool paletts and use the space-key to switch temporarily to the move tool to move the image around, my next mouse movements with click actions will be really jerky.
To explain this further more imagine you are on a deep zoom level inside an image, using the polygon lasso to mark an object exactely, there's often the situation where you come to the border of what you can still see and what you can't see anymore. Here you'd use space and move the window a bit in the direction you want to continue marking the object. When I do that (in fact after the first time i do that) I see that the whole processing of generating those marking points with the lasso gets really jerky as if the pc is studdering. It is not possible to work fluently and/or fast this way. As you can see from my speccs (see further down for details) pc speed is no real issue here. Other things like GPU-heavy games (e.g. Crysis) don't show any studdering.
Things I already tried to no success:
1) deactivated version cue
2) bumped the memory that Photoshop may use from 2.5 GB to the maximum of about 3.5 GB. Windows still has plenty of memory left for itself as Photoshop seems to have a border here that windows itself hasn't.
3) deactivated GPU-Support temporarily
Some more information:
1) Windows and Photoshop are on their newest versions/patches.
2) There is no emulation software and no Nero installed.
3) The file I'm testing this with is newly made (ctrl-n) in a resolution of 1280x1024 @ 300 dpi plain white. This shouldn't be extremely large.
4) Computer speccs: Intel Core i7 920 @ 4000 MHz, 6GB DDR3-1600, Geforce GTX 285 Black Edition, Watercooling for processor and north-/south-bridge and condensators. The whole system resides on 2 500GB Samsung Spinpoint F1's that run in raid 0 mode for speed purposes. Partitioning is done so that the operating system, programs, data, temp-files, photoshop swap file, windows swap file (and some more partitions) are each on separate partitions.
5) CPU/GPU temperatures are on nice levels (about 50°C each) and at least what I see from the CPU usage all 4 CPU-cores are getting bored during all this (less than 10% usage each).
6) This is nothing that is limited to the polygon lasso tool: If i use the clone stamp tool or a brush I get the same problem after moving the image around with the move tool on a higher zoom level.
7) I didn't have this problem on my old pc with Athlon 64 4000+ single core with 2 MB RAM and Windows XP Prof. 32 Bit. Furthermore I haven't seen my new pc without that problem so far. So the problem exists from the beginning.
Any help is much appreciated! I hope I made myself as clear as possible. If there are questions on your side please ask.
Kind Regards
Steve

Yes, of course the guarantee is solely on the vendor's part. They give 5 years of guarantee on the hardware as they build them together.
That is an interesting information with CS3 and multi-core-systems. I shall google that and see what information I find about it. Thanks for the remark.
I'd be more than happy if some folks here could bring some more light in the 64Bit-RAM-size-scratch-disk-issue and how it affects CS3-behavior. Would be really helpful.
Right now it should be (almost) like this: Vista gets about 2.5GB of RAM, Photoshop gets about 3.5GB of RAM, that is if Photoshop would take it (I'm not sure if it does although I configured it to do so). Being able to use the whole 6GB of RAM was the reason to use a 64Bit OS.
EDIT: I found a test with dual-core and quad-core systems with Photoshop CS3. The operating system seems to be 32 Bit though. It seems that CS3 doesn't scale very well with 4 cores. It uses 2 apparently but cannot make use of more. But anyway as I said: My old PC with a speed of 2.4GHz (single core Athlon 64 4000+) whose clock-speed is not directely comparable to my i7's 4GHz because of efficiency did the job without studdering. It had only one core that was much (!) slower than any single core on my i7. Even if the multi-core cannot be used from CS3 one would think that it had to run faster with the i7. In my opinion it must have something to do with either the 64 Bit OS or the raid0. The partions were no issue on the old machine (although I used multiple HDDs in the past so Windows and Photoshop were on the same HDD on different partitions but the scratch disks were on another).

Mouse tirgger in oracle 10g

Hi,
Is there any solution to use
When mouse move
when mouse enter
when mouse leave
triggers in Oracle 10g.
Regards,

http://forms.pjc.bean.over-blog.com/article-4850195.html
Re: Trigger not working in Web.

Trackpad-mouse moves-doesn't select

Hey all,
My friend's trackpad has an issue. She was working, closed her laptop, came back an hour later only to find that she couldn't select anything. The mouse moves and there is still a clicking noise when pushing down on the trackpad. I enabled the tap selection option so she could still work on it but the actual selection by clicking on trackpad is a no go.
She has the 10.5.8 Processor: 2.26 GHz Intel Core 2 Duo MacBook Pro -- if models have different trackpad versions...
I understand this most likely will need to be replaced, however, I'm looking for an explanation to why it would just stop like that and if there is a manual solution that won't cost much money (besides buying a mouse)... if this has happened to you, how much did you pay to have it fixed?
Polite suggestions and information is needed! Thank you!

This sounds like it could be a software issue. Does she have her information backed up? If so I would try to re install the operating system. If it still doesn't work after that then I would recommend calling Apple.

Different mouse clicks & speed up mouse movements?

Hello,
Does Adobe Captivate recognise different mouse clicks better
to say if it can record on RMB LMB and MMB clicks different
effects? For example I wish to record Software Simulation project
were on different mouse clicks (RMB, LMB, MMB) would have custom
effects like "OrangeRing" for RMB " "GreenRing" for LMB etc?
One more question plz: I found Published movie mouse
movements are very slow can I make it move more fast without
editing every slide separatelly?
Thanks
Ton

Hello Tony,
Whilst Captivate does recognize different mouse clicks (in so
much as the application will capture a right-click menu) you cannot
specify what type of mouse effect the application will use when you
capture.
What you can do is change the mouse click effect post
capture. To do this and with a just captured project open carry out
these steps:
1. Select the slide that has a mouse pointer where you would
like need to show a right-click action.
2. Choose Slide > Mouse > Properties...
3. In the Mouse Properties dialog make sure that the option
"show mouse click" is selected and then show either the color or
the custom effect you would like to use to represent the
right-click operation.
Naturally, at the very start of your movie/project you would
need to inform the learner that each time they see the one of the
effect you want them to right-click. You could also include some
audio as well which would be important if you need to adhere to
accessibility standards.
In regard to your second question, in most cases you will
find that you get the best result if you adjust the mouse timing
using the Timeline.
That said if you own a copy of Adobe Captivate 2 you can
change the mouse Display and Appear After settings globally via the
Mouse Properties dialog. Personally, for mouse movement I would not
recommend this. Anyway here are the steps to carry that out.
1. Select any slide that has a mouse pointer present.
2. Choose Slide > Mouse > Properties...
3. Click the Timing tab
4. Change the Display time and Appear After values
5. Click the Settings button
6. Choose the appropriate options from both Which properties
and which slide categories
7. Click OK.
Note : You can also show the Mouse properties dialog by left
clicking on mouse icon on any of the slides in the Filmstrip
Regards,
Mark

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

Sharepoint 2013 copy/move operation using Content and Structure fails

Hi,
We had a recent upgrade from SP2010 to SP2013 environment. After the migration, we realized that the
copy/move operations using Manage content and structure(sitemanager.aspx) is not working as expected, neither does this give any error nor is it stuck. In fact if I check the content and structure log I find the message as
succeeded but file/item is not copied to the target.
The strange thing is that if I am performing this operation with Full Control permission level it
does not work but if I do the operation as Site collection admin it works without problem. I know if sub-sites are to moved then one should be site col admin but in this case I am trying to move just documents or pages.
Any help will be greatly appreciated.
Thanks

Hi Vineet,
According to your description, my understanding is that copy/move operation using Content and Structure cannot work in SharePoint.
I recommend to check if there are any custom fields in the source list/library and target list/library. If yes, delete the custom fields to see if the issue still occurs.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/56d803d7-8573-4c29-9f6b-c63023941f44/manage-content-and-structure-cannot-move-or-copy-items?forum=sharepointgeneralprevious
To copy or move files/items between sites, we need to have
appropriate permissions on both sites.
I recommend to check if the user has full control on both sites.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

On my Cinema Display the screen is blurry and shifts with mouse movement.

I have had this screen for a year and a half and only use it once a week in my remote office. This morning I noticed blurring on the screen and the whole screen shifts up/down, left/right with mouse movement. Please help. I am getting a headache.
Thanks In Advance,
Rob

Press Command-Option-8 once or twice.
You have Zoom on. It is controlled in "Seeing" in "Universal Access" system preference, and by Control-Scrollwheel.

Flash video performance poor in Firefox 3 and other newer Gecko-based browsers; fails to detect mouse movement in full-s

Regardless of configuration, I have found Flash video
performance on Firefox 3 to be severely sub-par. Numerous visual
lags occur throughout a typical Youtube video as it cannot seem to
manage to maintain a steady frame rate. When in full-screen, mouse
movement is not detected, forcing me to click in a full-screen
Vimeo video in order to display its controls when I should have
only needed to move the mouse. I was informed that the technical
explanation for this is that Flash isn't triggering MouseEvents
other than MouseEVENT.CLICK.
In my tests, this behavior also occurred in Flashplayers 9
and 10 as well as with recent versions of other browsers that also
use the Gecko rendering engine, namely Camino, Flock and Songbird,
but not in Firefox 2. I was told by a Mozilla employee that this
issue can only be solved by Adobe.
This has forced me to use the Safari browser as my only
available work-around. I implore that these issues get resolved as
quickly as possible.

guys, im exactly experience the same issue here.. any
solution guys? tks in advantage..

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Press the key combination command-F5 to deactivate VoiceOver. If that doesn't work, proceed as follows.
For OS X 10.7: From the menu bar, select
 ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off
For OS X 10.8 or later: Select
 ▹ System Preferences ▹ Accessibility ▹ VoiceOver ▹ Enable VoiceOver: Off

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

How can I stop coalescing of mouse move/drag events in jdk1.6 ?

Hello all,
My application uses a [pen-based tablet|http://en.wikipedia.org/wiki/Graphics_tablet] to draw lines/curves. But the problem is: when I run my application, due to javas default behavior of discarding the mouse events which occurs during the repaint call, the curves results in the set of joined straight lines.
To overcome this problem, when searched over net, came across below link:
[http://forums.sun.com/thread.jspa?messageID=10811388]
I tried the option provided at the above URL i.e. overriding the below method of Component.java file:
protected AWTEvent coalesceEvents(AWTEvent existingEvent,AWTEvent newEvent);
But later found that, overriding this method worked fine for me for jdk1.5 but this solution did not work in case of jdk1.6. When reviewed the source of Component.java and EventQueue.java files in jdk1.6, found that this method is not having any implementation and simply returns null and the complete handling of coalescing of events occurs within EventQueue.java files local method which is mentioned below:
private boolean coalesceEvent(AWTEvent e, int priority);
As this method is part of EventQueue.java and also it is a private method, I am not finding any way to stop the coalescing of mouse move/drag events in jdk1.6.
The main problem is that my application is purely based on jdk1.6 only.
Can anybody help me out to solve this problem by providing any option of preventing the coalescing of mouse move/drag events in case of jdk1.6.
Thank you.

Look at the link I posted, you aren't double buffering correctly.
I saw the other post you mistakenly made before you edited it. Not really a big deal, I was just wondering why you did that.

Mouse Move Operation in 10g

Similar Messages

Maybe you are looking for