Mouse move slow in gnome

My mouse in gnome move very slow.But it doesn't like this in xfce4 and fluxbox.I have adjust the mouse acceleration in gnome but can't change.
Who can solve this?and explain.

Hello,
The Oracle Forms OTN Forum is here : Forms
Regards

Similar Messages

Why does my mouse move slowly?

Why does my mouse move slow?

Check the setting for tracking speed. You'll find that in System Preferences > Mouse.
Note that tracking speed has variable accelleration associated with it; it responds to the speed of the mouse movement as well as the distance. When the tracking speed is set to fast, a slow movement of the mouse will yield an approximate one-to-one response from the cursor; but if you flick the mouse quickly, the cursor will fly across thre screen.
If you're using a non-Apple mouse, and it came with its own software, check in that control pane for a similar setting.

After web page finish, mouse movement and scroll up down very slow.

After web page finish loading,both mouse movement and scrolling that page is very slow.
I compare the same page on MS internet explorer and have no problem.
p.s. I'm using intel core 2 dual on 4gb ddr3 windows vista 32bit.
== URL of affected sites ==
http://www.sanook.com

Thanks for both of these answers. I am finding that I do not
like the totally manual method all that much (but it does work).
Using the PrintScreen-before-and-after-each-action method seems a
little better for me. Either method requires way too much editing
for a simple "let me show you" movie. I have moved on to version 3
since it seems to behave a little better.
I think it is odd how sometimes Captivate puts an action
(like a mouse click) on a background from *two* slides previous.
Why would it ever go backward - especially skipping over the
previous slide to get an even older screen. If I have forced a
screen capture, you would think it would stay with that.
I realize that I am not using Captivate where its strengths
seem to be (eLearning) but there must be a lot of people capturing
demos of web-based material. Does everyone have this
problem?

My laptop had water spilled on it 3 days ago, I let it sit as instructed by best buy . I am on it right now but the mouse movement isn't smooth anymore and it is slower. The first time I turned it on it didn't respond at all, how bad is the damage.?

My laptop had water spilled on it 3 days ago, I let it sit as instructed by best buy . I am on it right now but the mouse movement isn't smooth anymore and it is slower. The first time I turned it on it didn't respond at all,can anyone tell how bad the damage really is without actually seeing it ? Do you think maybe it will be just a simple repair or am I looking at a whole new logic board?

Until you take it in so that a technician can look at it, it is all guessing and nothing more.
Allan

CS3 Ext. Vista 64 jerky mouse movement

Hi there,
I have a huge problem with my 32 Bit Photoshop CS3 Extended under the operating system Windows Vista Business 64 Bit and don't know if this is a known problem or has to do with the 64 Bit or something. I don't know what to do more so I ask here in hope of some help.
The problem: When I use the f-key to switch to a mode where the image uses the whole space behind the tool paletts and use the space-key to switch temporarily to the move tool to move the image around, my next mouse movements with click actions will be really jerky.
To explain this further more imagine you are on a deep zoom level inside an image, using the polygon lasso to mark an object exactely, there's often the situation where you come to the border of what you can still see and what you can't see anymore. Here you'd use space and move the window a bit in the direction you want to continue marking the object. When I do that (in fact after the first time i do that) I see that the whole processing of generating those marking points with the lasso gets really jerky as if the pc is studdering. It is not possible to work fluently and/or fast this way. As you can see from my speccs (see further down for details) pc speed is no real issue here. Other things like GPU-heavy games (e.g. Crysis) don't show any studdering.
Things I already tried to no success:
1) deactivated version cue
2) bumped the memory that Photoshop may use from 2.5 GB to the maximum of about 3.5 GB. Windows still has plenty of memory left for itself as Photoshop seems to have a border here that windows itself hasn't.
3) deactivated GPU-Support temporarily
Some more information:
1) Windows and Photoshop are on their newest versions/patches.
2) There is no emulation software and no Nero installed.
3) The file I'm testing this with is newly made (ctrl-n) in a resolution of 1280x1024 @ 300 dpi plain white. This shouldn't be extremely large.
4) Computer speccs: Intel Core i7 920 @ 4000 MHz, 6GB DDR3-1600, Geforce GTX 285 Black Edition, Watercooling for processor and north-/south-bridge and condensators. The whole system resides on 2 500GB Samsung Spinpoint F1's that run in raid 0 mode for speed purposes. Partitioning is done so that the operating system, programs, data, temp-files, photoshop swap file, windows swap file (and some more partitions) are each on separate partitions.
5) CPU/GPU temperatures are on nice levels (about 50°C each) and at least what I see from the CPU usage all 4 CPU-cores are getting bored during all this (less than 10% usage each).
6) This is nothing that is limited to the polygon lasso tool: If i use the clone stamp tool or a brush I get the same problem after moving the image around with the move tool on a higher zoom level.
7) I didn't have this problem on my old pc with Athlon 64 4000+ single core with 2 MB RAM and Windows XP Prof. 32 Bit. Furthermore I haven't seen my new pc without that problem so far. So the problem exists from the beginning.
Any help is much appreciated! I hope I made myself as clear as possible. If there are questions on your side please ask.
Kind Regards
Steve

Yes, of course the guarantee is solely on the vendor's part. They give 5 years of guarantee on the hardware as they build them together.
That is an interesting information with CS3 and multi-core-systems. I shall google that and see what information I find about it. Thanks for the remark.
I'd be more than happy if some folks here could bring some more light in the 64Bit-RAM-size-scratch-disk-issue and how it affects CS3-behavior. Would be really helpful.
Right now it should be (almost) like this: Vista gets about 2.5GB of RAM, Photoshop gets about 3.5GB of RAM, that is if Photoshop would take it (I'm not sure if it does although I configured it to do so). Being able to use the whole 6GB of RAM was the reason to use a 64Bit OS.
EDIT: I found a test with dual-core and quad-core systems with Photoshop CS3. The operating system seems to be 32 Bit though. It seems that CS3 doesn't scale very well with 4 cores. It uses 2 apparently but cannot make use of more. But anyway as I said: My old PC with a speed of 2.4GHz (single core Athlon 64 4000+) whose clock-speed is not directely comparable to my i7's 4GHz because of efficiency did the job without studdering. It had only one core that was much (!) slower than any single core on my i7. Even if the multi-core cannot be used from CS3 one would think that it had to run faster with the i7. In my opinion it must have something to do with either the 64 Bit OS or the raid0. The partions were no issue on the old machine (although I used multiple HDDs in the past so Windows and Photoshop were on the same HDD on different partitions but the scratch disks were on another).

Jumpy mouse movements on Asus netbook

Just installed FF 4.0 and using it on an Asus netbook 1101HA. Whenever I use the mouse on a website, the mouse moves erratically, noticeably erratic. This problem is not apparent in any other app. (I'm using the mouse pad and not an external mouse.)

Hi Rod,
we are working on this with our team, and here are some interesting things we found out:
We uploaded a non-scorm course on Moodle and it works smoothly. In Captivate every page will communicate with the LMS for bookmarking and reporting. Maybe for that reason the animations are not smooth. With this observation we are trying to play around with the layers in Captivate to see if it brings any difference.
Here is the link to the non-scorm course: http://mytechschool.com/moodle/file.php/101/Multi%20Color%20Pen%20-%20v1.38.htm
The communication that occurs on each slide is causing the jumpy mouse / slow mouse movements. Is it possible to fix it by modifying / adding javascript into the HTML wrapper so the SCORM package didn't send the results until the end of the assessment?
How can we do this?
Here is the moodle post where they provided javascript code to accomplish this task. Unfortunately, when this code is used, it doesn't record the results in the gradebook. We could use help from the Adobe community to modify this code so it records the results in the gradebook while avoiding a jumpy mouse.
http://moodle.org/mod/forum/discuss.php?d=79349#p804524\
TIA.

Capturing mouse movement to define an animation path?

Hi All,
Does there exist a plugin for flash that would allow me to
define animations by capturing my mouse movements? I'd like to be
able to rough in my animation timing by selecting an object, then
dragging it around the screen at will while the software captures
the path of motion along with the timing of it. This would allow me
to keyframe a rough animation sequence really quickly because the
computer clock and my hand motion defines the placement of the
various keyframes. Is anything like this possible right now?
Thanks

i dont think so.. but why dont you use the pencil tool and
draw on the stage, make that layer a guide layer, the shorten the
distances of keyframes for your animation so it looks like it's
speeding up, widen them to look like its slowing down

My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Different mouse clicks & speed up mouse movements?

Hello,
Does Adobe Captivate recognise different mouse clicks better
to say if it can record on RMB LMB and MMB clicks different
effects? For example I wish to record Software Simulation project
were on different mouse clicks (RMB, LMB, MMB) would have custom
effects like "OrangeRing" for RMB " "GreenRing" for LMB etc?
One more question plz: I found Published movie mouse
movements are very slow can I make it move more fast without
editing every slide separatelly?
Thanks
Ton

Hello Tony,
Whilst Captivate does recognize different mouse clicks (in so
much as the application will capture a right-click menu) you cannot
specify what type of mouse effect the application will use when you
capture.
What you can do is change the mouse click effect post
capture. To do this and with a just captured project open carry out
these steps:
1. Select the slide that has a mouse pointer where you would
like need to show a right-click action.
2. Choose Slide > Mouse > Properties...
3. In the Mouse Properties dialog make sure that the option
"show mouse click" is selected and then show either the color or
the custom effect you would like to use to represent the
right-click operation.
Naturally, at the very start of your movie/project you would
need to inform the learner that each time they see the one of the
effect you want them to right-click. You could also include some
audio as well which would be important if you need to adhere to
accessibility standards.
In regard to your second question, in most cases you will
find that you get the best result if you adjust the mouse timing
using the Timeline.
That said if you own a copy of Adobe Captivate 2 you can
change the mouse Display and Appear After settings globally via the
Mouse Properties dialog. Personally, for mouse movement I would not
recommend this. Anyway here are the steps to carry that out.
1. Select any slide that has a mouse pointer present.
2. Choose Slide > Mouse > Properties...
3. Click the Timing tab
4. Change the Display time and Appear After values
5. Click the Settings button
6. Choose the appropriate options from both Which properties
and which slide categories
7. Click OK.
Note : You can also show the Mouse properties dialog by left
clicking on mouse icon on any of the slides in the Filmstrip
Regards,
Mark

(Solved) Mouse moves faster than windows (e17)

I use KDE as my main DE so I have mainly qt applications. I wanted to try out something new so I downloaded e17, openbox and fluxbox, hoping to try each out for a week and see what I liked.
The problem arises with e17. I'm loving it except for the fact that most of my applications move literally slower than my mouse, its like there's some effect enabled that makes my windows have 'inertia' and move slower than my mouse cursor.
The movement seems to also be toolkit (qt/gtk) independant, however this is hard to judge because I have mainly qt applications other than Rhythmbox.
Any ideas?
Thanks in advance.
Last edited by mtbrooks33 (2012-03-23 10:48:58)

kevinmchapman wrote:Are you using the Composite module? I once had a similar problem when I was trying out some options with that module, but my video card did not like. Probably the easiest "fix" is to delete the .e folder in your home directory. You will need to go through the first-run questions again to recreate it, but saves a lot of experimental box ticking/unticking.
Deleted the .e folder and reconfigured. Problem solved! Thread marked as such. Thanks for your help.

Erratic USB mouse movement.

I'm having an issue which I believe is common, however I cant find a proper answer to it.
I have a 3Button USB mouse plugged in, and whenever the cursor goes near anything clickable, the mouse pointer slows down and then speeds up again as I move over the icon/link/control.
I originally thought this was some kind of accessibility feature, I noticed the issue on my universities Mac computers last year.
Some of the software I use for my work requires a 3button mouse, and this problem is making those programs completely unusable.
I have tried numerous USB mice from different manufacturers and no 3rd party drivers or mouse controlling software has been installed.
Is there any way to fix this? the wireless mouse the iMac came with seems unaffected, but It does not support Middle or 2button mouse clicks which I need to do my work.
Thankyou.

This is likely caused by the software that came with your TP mouse. I have experienced a similar problem in the past.
Forst thing I would check is go to system preferences and look for one labeled with the Mouse's brand name (i.e. Logitech) and see if you can disable any predictive clicking options.
Having said this the [Magic Mouse|http://www.apple.com/magicmouse> that came with your iMac certainly does support two-button clicking - you need to enable in from System Preferences > Mouse as it is not enabled as default.

Mouse moves farther when moved faster... really annoying

This is really annoying me and I can't believe there is no setting for this.
All there is is a setting for mouse speed.
When drawing in photoshop or things like that, if you're trying to draw fast and accurate you can't. Because when you move faster, you're going different lengths then when you move slower. In windows it's all the same, if I move 3 inches going slow I go the same distance as going fast, but not on mac...
Is there a way to solve this?... You would think they would do something about this.

Are you using an external USB mouse? If so try downloading the shareware driver USB Overdrive and installing it in place of any third-party mouse software you are presently using. It will give you much greater control over scrolling and tracking speed.
If you are using the computer's trackpad then you might try installing SideTrack. It also provides more control over tracking and scrolling.
You will find both at www.versiontracker.com or www.macupdate.com.

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mouse move slow in gnome

Similar Messages

Maybe you are looking for