Mouse not connecting automatically after waking from sleep

Hi,
When I open my MacBook after it's been asleep, my apple bluetooth (non-mighty) mouse does not connect automatically. I have to repeat the setup new device wizard to get the mouse to work. This is 100% consistent and occurs every time.
This mouse was previously my son's and has a particular "affinity" for his computer. For example, before he deleted it from his own system preferences, the mouse would connect to his computer instead of my own even if he was rooms away from me. (this isn't strictly related, since it still occurs even if his powerbook isn't here or is sleeping).
Thanks,
Diane

Hello Diane:
Welcome to Apple discussions.
Try clicking the mouse if it does not automatically pair.
I would also delete the preference file (com.apple.bluetooth.plist) and restart.
Barry

Similar Messages

  • Not re-connecting automatically after waking from sleep

    Hello,
    I have recently purchased the TC 1Tb version. I have set this up to be automatic for both channels and all seems OK. However, after I wake up the Imac from sleep mode, the wireless does not automatically re-connect. I have to manually re-connect from the airport symbol in the menu bar. I have an a normal AE before this, and I did not have this issue.

    Hello Diane:
    Welcome to Apple discussions.
    Try clicking the mouse if it does not automatically pair.
    I would also delete the preference file (com.apple.bluetooth.plist) and restart.
    Barry

  • After upgrading from Lion to Mountain Lion the wi-fi doesn't connect automatically after waking from sleep. I have a Macbook Pro. It's really annoying and I need help. Anyone?

    Wi-fi worked fine before I upgraded and always connected automatically but now nothing seems to work. Does anyone know how to fix this?

    you've posted in the iPhone forum.

  • My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode

    Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
    Does anyone know how to fix that?
    Thanks in advance,
    Arthur.

    Hi, arthurpacifico. 
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Reset your computer’s PRAM
    http://support.apple.com/kb/HT1379
    If the issue persists, try the troubleshooting steps I have attached below.
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
    After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
    Solution
    Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/ht4628
    Cheers,
    Jason H. 

  • Connection problems after waking from sleep????

    I'm having a strange issue with my 2012 Macbook Pro running OSx v10.8. I take my computer with me between home and school, and I usually just put it to sleep during the commute. For the last few weeks, when I got to school and woke up my MBP, it wouldn't connect to the internet. It recognized the WiFi connection, but did not assign a valid IP address. It was only when I shut the computer down and rebooted it that I was able to connect. Strangely, when I got home, I had no problem connecting to my home network, even after waking up from sleep.
    After a little while of this, it got worse. Now, even after re-starting, I am unable to connect at school. (WiFi icon shows exclamation point). This is also true for my home network.
    Here's the kicker. When I log out of my default account and log into the guest account, I have no trouble either in school or at home. Waking from sleep is never a problem and I connect everywhere. However, as soon as I log back into my other account, I lose connectivity.
    I have tried renewing my DHCP lease, or manually inputting an address, but neither of these have worked. I have resorted to using the guest account, and I want access to my old files again without having to switch back and forth.
    If anyone has any input on this, it would be greatly appreciated!! Feel free to e-mail me at [email protected]
    Thanks!

    same issue here..
    reset my network settings and reset phone a billion times already, same issue still occur. sometimes the phone will wake up with wifi and sometimes it will go to 3g, one time it went to GPRS, its just really bizarre. If i open safari it will ask if i want to join the network that i originally set up, but when i select the network it just says "unable to connect". If i just leave the phone be for a couple hours and wake it up again, it will rejoin the wifi network.
    I use remote to control my music library, but if my phone goes to sleep, it won't reconnect again so it's basically useless.
    BIZARRRRRE, driving me crazy..

  • Network connection lost after waking from sleep

    iMac (27" late 2013) running Yosemite 10.10.
    Ethernet connection direct to the computer from the FIOS router.
    Upon waking from sleep, the computer is not connected to the internet.
    After about 20 seconds it finally reconnects.
    Under Mavericks it never lost the connection by sleeping - was instantly connected upon wake up.
    I tried creating a new location under the network system preferences and ordered it so that Ethernet was the first to connect.
    That didn't change anything.
    Any suggestions how to fix this?  I don't want to have to wait every time I wake up the computer.
    Really bugging me.

    Update on my situation.
    I have tried many things to get this fixed including:
    SMC reset (for an iMac this means unplugging it, waiting, and plugging back in)
    PRAM reset
    deleted the "system configuration" folder
    Still no luck.  Upon freshly booting the machine, it gets to the desktop and opens up mail for me, but the internet is not connected right away.  Still takes an additional 15seconds or so after Mail boots up to get a connection.  Then everything works fine.  If the computer sleeps, it doesn't have internet upon waking, but again will establish a connection (self assign an IP address) after about 15-20 seconds.
    So while not crippling, these 15-20 second waits are very annoying.
    Interestingly, this is ONLY with a wired Ethernet connection.  If I use WiFi everything connects right away.  But my WiFi is slower than the wired connection and I prefer to use the wired connection.
    Any further suggestions are welcome.
    Chris

  • Wireless Mouse Doesn't Work After Waking From Sleep Mode

    I have a MacBook Pro 13" 2.9 GHZ running on OSX 10.8 and when it wakes from sleep the wireless usb mouse no longer functions. I have to continually unplug then plug the mouse back in for it to work. Is there a way to solve this problem? I haven't found any definitive answers through searching the web. It's minor but irritating as I'm not fond of using the trackpad.

    Would like to backtrack this discussion to
    Re: iMac 2014 5K Bluetooth Trackpad Problem after sleep
    Please add your system configuration and Wifi details (G, N or AC) to the mentioned thread if possible

  • Wi-fi internet connection problem after waking from sleep

    hi, i have a macbook pro 5,4 running 10.6.8 OS and i have a wireless issue. whenever the laptop is awkoen from sleep it will take about ~60 seconds to connect to the internet. The wifi indicates that it is connected to my home wifi almost immediately but there is just no internet. Google chrome reports that it is sending a request or redirecting in which it eventually fails to load page. this is very annoying having to wait a minute for my internet to work. i have tried downgrading my wireless card driver/extension to older 10.6.4 as i read there was a wireless issue from 10.6.5 up, but this did not fix the problem. i have also tried changing channels and settings on wireless router with no effect. i do not have any connection issues once the internet connection is established. please help. thanks!

    Have you tried it with a different mouse? I'm no expert, but you might want to find out, if the problem is mouse-specific.

  • Keep losing network connection, especially after waking from sleep, but...

    For a while now, my G5 would have intermittent problems not finding the network after it has been asleep for a bit. I used to resolve this by resetting the router, or sometimes putting the Mac back to sleep and resetting the router.
    Lately, I discovered another fix: wake up my MacBook. The MacBook wakes up, connects wirelessly, and sees the network, and shortly thereafter, the G5 sees it too.
    I cannot interpret this. Why would it be that the G5 would fail to see the router until after the MacBook is awake (and sees the router)? I never could figure out which component was at fault before, and this further confuses me. I mean, it seems that it has to be the G5, since if another computer can see the net on the same network, it would rule out the router and the cable modem. Right?
    So what do I do about the G5, then? Yesterday, it was getting to the point where every time I woke up the G5, it wouldn't find the network (until after I woke up the MacBook).

    Hi, Brent:
    I would not be too quick to start swapping things out (esp. expensive things!) without letting the discussion flow. I have never seen an answer that worked except updates and not all do... see below.
    My Dual 2.5GHz G5 has been doing this on and off for years. It has been networked wirelessly since I got it and I am on my third router now for other reasons. I run two other Macs (G4 mini and early IMac/Intel) as well as two laptop PCs, all wireless. None of the other machines ever has this intermittent connectivity issue - just the G5. The symptom is a stalled browser (Safari or FireFox) with the wireless symbol almost always at four bars. Once in a while (like today), the bars will fade down to two for a while, but rarely. Absolutely the only temporary fix I have found successful is to switch airport on and off. Cure may hold for a while or it may not. Have noticed some apps using airport still seem to work (an old MacStumbler utility) even when Safari locks up. Thought it might be a Safari bug, but FireFox does the same thing.
    IMHO, this is fundamentally related to a G5 software issue or interaction with the airport or network card. As I noted above, code evolution is a strong factor in my experience. My problems come and go tightly linked to software updates. It is usually a night-and-day change. I am at 10.4.11 on all Macs here; problem had not been around until I ran the last big update to 4.11. Interestingly, my daughter owns a very new iMac with Leopard and has seen the same type of behavior since Day One. I have also seen this problem mentioned about Leopard and iMacs in the lay press.
    Wish I could offer a solution, but I am just waiting it out again.

  • MBP 6,2 late 2010, OSX 10.6.6, Ethernet not detecting cable after waking from sleep. Must restart MBP to get ethernet detect cable. Any ideas? (apart from rebooting when not working).

    Will be installing 10.6.7 soon, will let you know if it fixes it.

    OK, 10.6.7 update did NOT fix the issue.
    So before putting mbp to sleep last night, I did a SMC reset procedure.
    This morning when it woke up, it detected the cable immediately.
    Thanks leroydouglas.

  • Safari hangs and is very slow to connect initially after waking from sleep

    Using Safari and 10.4.8 on a Mac Mini intel core duo
    I put my Mac to sleep at night with the hard drive awake. In the morning, I wake my Mac and try to load a page in Safari and it always take about a minute for it to load the first page. Once it does that successfully then it works fine. Just seems that Safari and the network, which is wireless, take an exceptionally long time to wake up.
    Any suggestions? I've cleared Safari's cache and rebooted.

    Hi alternapop!
    Is loading webpages on Safari the first thing you do every morning you wake your Mac? It would seem to be something more related to your network or system getting up and running than Safari? Can you try it out with Firefox or another browser and see if you get the same thing and post back?
    Reg...

  • My iMac won't automatically connect to wifi after waking from sleep mode

    After dowloading the newest software update and performing a firmware update for my Airport router, my Imac won't connect to Wifi automatically after waking from sleep mode

    Please re-download and install the 10.7.3 update. You can locate it at 10.7.3 (Client Combo). Follow the on-screen instructions. Then test it out, if you still have the same problem please restart, when you hear the startup tone hold down the Option Key and then choose the Recovery Partition. Then open Disk Utilities and Repair Disk Permissions 2x. Then exit DU, restart normally and re-test.

  • Wifi does not connect automatically after sleep

    Since installing Yosemite on my Mid 2011 iMac - when my computer wakes from sleep mode, it does not automatically connect to the wifi.  I have to select the network to join from the top menu bar.  Is there anyway to make it connect automatically like it use to?  Thanks for any and all help!

    Hello ffmed124,
    The steps detailed below can help get your iMac to reconnect to your Wi-Fi network automatically after waking from sleep.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus (-) sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility. 
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Restart your computer.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    Allen

  • Ethernet slow to connect after waking from sleep

    Since installing Lion (and updating to 10.7.1) on my 2008 24" iMac I have noticed that after waking from sleep the internet connection takes about 10 seconds to restore. I have reset the SMC and PRAM and performed a safe boot (in case this helped) but to no avail. The slow conenction can be observed if after waking from sleep the Network System Preference is clicked and the ethernet status "light" is red, changes briefly to amber and then green indcating a connection. The iMac is connected via an ethernet cable to a Linksys 802.11n 4 port wireless router.
    I also have a 2010 13" MacBook Pro, with the same OS, and version, conencted in the same way to the same Linksys router and it does not exhibit this problem.
    This slow internet connection access after waking from sleep is an annoyance and I'd appreciate any input on how to elimnate it.
    Thanks to those wiser than I, who might read this note.

    SOLUTION FOUND!
    I've found a list of possible solutions here's the link:
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    I solved my problem moving the Ethernet and WiFi adapters in the top of the list and Bluetooth at the end.
    Move Wi-Fi to the top of the Service Order list – This is an old tip that simply prioritizes WiFi as the primary method that your Mac should connect to the internet, and it seems to help maintain connections

  • Mouse skipping wildly after waking from sleep

    Not sure if I've fixed this already yet or not but, sometimes after waking from sleep my wireless mighty mouse has a bad delay (skips around a bit too). I'm using Steer Mouse (which seemed to preform normally) but have uninstalled it just to see if it was the problem. So far, so good: no mouse problem after sleep, though I've only tried it a few times.
    Anyone having this problem who doesn't have Steer Mouse installed?

    same prob but with the trackpad. I don't think it is a prob with your particular mouse. There is a few other topics covering this.
    Common theme... only a reboot will fix.

Maybe you are looking for

  • Support symbolic links (symlinks or Unix's 'ln -s') in the iTunes Media folder hierarchy

    As of iTunes version 12.0.1.26, iTunes has partial support for symbolic links in the iTunes Media folder hierarchy. I'd like Apple to enhance iTunes to treat any symlink or folder alias within the hierarchy the same as folders. With the Unix core und

  • Bug? Picture Ring proprty String and Values" returns error 1054 in LV 8.5

    Should that propert exist for a Picture Ring? Ben Message Edited by Ben on 09-01-2008 07:47 AM Ben Rayner I am currently active on.. MainStream Preppers Rayner's Ridge is under construction Solved! Go to Solution. Attachments: Error_1054.PNG ‏27 KB

  • Order of songs in a playlist ?

    Hello, I hope somebody can help me: I created several playlists on my 1st-generation iPod nano in coordination with iTunes. Now I want the songs to be played in alphabetical order - in iTunes everything is okay, but if I eject the iPod the songs are

  • Status stuck in computer to computer

    My biege G3 runs 10.2.8 at 400 mhz . My airport status bar shows computer to compter - so I can't join my wireless network. I can't figure out how or what I did to change it. Much less how to put it back. The iBook shows "Staus: not available" but wo

  • LineTo on MouseMove has performance issue on scaled display object

    Here is the scenario: 1. on mouse down on a canvas, start handling MouseMove event 2. on Mouse Move draw a line to the current mouse position When the above processes run, the result is a descent enough line being drawn on the canvas. Now if we progr