Mouse not moving during the talk

during a talk my mouse is not moving ...so how can i use pointer during keynote lecture>?

You can enable mouse movement during full screen playback by heading to Preferences/Slideshow/"show pointer when mouse moves"; or press the "c" key to show/hide the cursor

Similar Messages

BBP_PO_SEND_XML - Not triggered during the creation of PO

Hi All,
We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
Thanks,
Phani.

Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

Application does not start during the engine restart.

Hello all,
after deploying a custom developed application to the engine the application works fine. However, when the J2EE is restarted the application page is not available with the following message:
Application error occurred during request processing. Details:Error
[javax.servlet.ServletException: Spo object was not created during the
startup], with root cause [com.appname.exception.SevereException:
Spo object was not created during the startup].
Exception id: [0013729689A200590000009D00000D90000446937D1802B7]
The application is shown running from visual administrator.
The application page is again available when we restart the application
manually from visual admin.
SO everytime we restart the engine we need to restart the application
too in order to get back the application page back.
There are many errors in the SPO log like the following:
ERROR [SAPEngine_Application_Thread[impl:3]_25] - Failed to set up connection pool: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/jdbc/qaht6114.
Can anyone please advice us on what could be the problem here?
Thanks a lot in advance!
Edited by: Rodrigo Castilhos on Mar 21, 2008 6:21 PM
Edited by: Rodrigo Castilhos on Mar 25, 2008 6:48 PM

Hi Parvez and Ivaylo,
Has any of you used the startup mode setting? I tried using it and set it to always but the application still won't start. Is there anything I'm missing?
My application-j2ee-engine.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
     <provider-name>nexeninc.com</provider-name>
     <fail-over-enable
          mode="disable"/>
     <start-up
          mode="always"/>
</application-j2ee-engine>

HT1386 my sync stops due to iphone not found during the final copy step...how do I fix?

my sync stops with an error message that iphone not founds during the final copy step...how to I fix? always work before.

The backup is located at: iTunes/Preferences/Devices. Select the backup from the window and hit the delete key. Then connect your iPhone to your computer. It'll take a new backup.

Travel Expenses through ESS Not Moving to the MSS of Immediate Boss

Dear Gurus,
After the travel request has been approved by the immediate boss on MSS, employee is creating the Travel expense
report for the same request number through ESS.
But After saving and Sending the travel expense report for Approval through ESS by the employee,
Expense report for Approval is not Moving in the MSS of his Immediate Boss.
Kindly suggest how to achieve this, Immediate boss should approve/Reject the Travel Expense Report through MSS.
Any standard workflow existing for this ?? For Travel Request we are using 20000050 and it is working fine.
For Travel Expenses through ESS:-
We have already activated 20000040 and configured the same in T Code SWETYPV.
Object we are using is BUS2089.
Kindly let me know which Event and Functional module is configured in T Code SWETYPV.
Or any other steps we are missing Or any other Workflow to be used to achieve this ???
We need Travel Expense Approval on MSS by the immediate Boss.
Regards,
Edwin

Hi,
Try checking agent assignments of task TS 20000135:
Tcode PFTC:
Task type: Standard Task
Task: 20000135
Display
From top menu choose: Additional data --> Agent assignment --> Maintain
Click "Attributes..." and chooce "General Task" and then "Transfer".
Then click Red and White ball icon (refresh index Shift+F1).
Check also (using SWDD) that WS20000040 has agent maintained for task 20000135. I am not sure if it is there in standard. You can choose superior of the initiator rule from drop-down if it is not maintained.
Regards,
Saku

N95 alarm not functioning during the phone is turi...

After i upgrade my N95 to V20.0.015, i find that my alarm is not functioning during the phone is off. May i know what cause this problem occur?

07-Dec-2007 07:38 AM
calixteid wrote:
Sorry, no answer to this but tried to get the new software download from Nokia but only gives the V12 0 013 update.
has the download helped other problem?
That is because the code on your phone has not been authorised to get the latest FW update. Either an operator is not passing it yet or its country specific.
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

User ID & log in fix... to preserve or not preserve during the fix?

OK I have the same problem as most everyone else here but am not sure which preference to choose during the archive and install fix suggested by most everyone. So which option should I choose before I embark on this crazy bug fixing adventure.
Details: I upgraded to Leopard... Lost one of my four user log ins (the one with 8 or more characters in the password. Still have admin access via another user account (lucky me) but I want to get my other user log in back so the Re-install with Archive & install options seems to be working for most folks but am getting conflicting advice about weather to choose the "preserve option" or not
_*Do I choose the preserve user & network settings or not??????*_
For folks who have not scoured the 100s of other posts here is what I have gathered
http://docs.info.apple.com/article.html?artnum=107120 article
and
http://docs.info.apple.com/article.html?artnum=306840
and
I installed Leopard yesterday and had this problem - only said "Other..." and I could not sign on. None of the "gobbledygook" methods helped - a bit scary anyway. This morning I spoke to the local Apple supplier, who suggested to re-run the install, but click on "Options" and select "Archive & Install" - the default is just "install", which is what I ran.
At the end of the "Archive and Install" the user names were back, and everything seems normal.
I had the "Other" problem as well. Re-installing and selecting "archive & Install" in the "options" fixed it for me! Brought back all five users and their passwords (including the ones I had changed trying to fix this problem using the DVD install "utilities" and the "password reset" section.
Thanks.
I actually found that when I selected the drive to install to I did not double-click it to give me install options of keeping previous logins, once I reinstalled with this option, everything worked fine
einstall with archive method under options.
You have to reboot first with teh disc in the drive. Hold C the whole time.
and this posting which is the only one that mentions doing it without preserving
If you boot back up to the install disk, go to the Utilities menu then Password reset program. Select your hard drive and the drop down list for user accounts is empty, you could do the follwing to resolve the issue without looseing your personal files. Might take awhile though.
Do an Archive and Install without Preserving (http://docs.info.apple.com/article.html?artnum=107120)
When this is done you'll be guided through to make a new user account
Once in the new user account you go to /Previous Systems/<date and time of the A&I>/Users/<your home folder> and get all your files back

I had one account vanish in this way. This is what I did. In this case the missing account had a user name of bradleyross.
I logged in using an existing administrative account. You don't want to use the account that you create until after all of the files have been moved and had ownership updated.
1. Create a new account with a short user name of bradley.
2. Go into the terminal window and set the current directory to /Users/bradley
3. Delete everything in the bradley home directory
sudo rm -R /Users/bradley/*
4. Move everything in /Users/bradleyross to /Users/bradley
sudo mv /Users/bradleyross/* /Users/bradley
5. Change ownership to all of the files in /Users/bradley so that the owner is bradley
sudo chown -R bradley /Users/bradley/*
6. I was then able to log in to the bradley account and had all the files and settings from the bradleyross account.
7. I had to change a few shell scripts so that they contained /Users/bradley instead of /Users/bradleyross. I don't think that this will be a problem unless you have edited some UNIX shell scripts yourself.
Make a copy of everything in /Users/bradley and /Users/bradleyross before you start
I'm typing this in on a workstation at the Apple store at Christiana Mall in Delaware and typing this in from memory. I don't think I made any typos above, but look before you run.

Mouse not moving while key is pressed

I am using a Lenovo G500 (product 20236), I couldnt find the correct forum. Move to wherever necessary.
I have a problem where the mouse does not move or click while I am holding down a key. I want to do this without disabling my mouse driver, even though I really dont give a zero about its features other than scrolling. This "feature" is so frustrating, and can easily be replicated: Press a key other than alt, ctrl, or shift, and try to move the mouse. I want to be able to move the mouse while holding a key without removing the driver, but I dont want to remove the driver.
Moderator note: moved to appropriate forum. Edited subject.

There is no ultranav anywhere, and one finger scrolling is not in the Elan settings. There used to be one finger scrolling here.

Animated gif is not moving in the FireFox 3.6.3 ?

why animated gif is not moving in FireFox 3.6.3 ?
== This happened ==
Every time Firefox opened

Same problem in save mode. An animated gif will not start. No offending plugins or themes are installed.
But if I right-click on the animation and then on "Grafik-Info anzeigen" (maybe "show grafic info") then as soon as the info window starts the animation, it is also started in the browser!
And this error does not happen on all machines. My Win7 64bit does it right. My XP 32bit (freshly updated) freezes the animation. Weird world.

Process orders in the weekend moving during the night in APO/PPT1

Hello Gurus,
I have a problem on the scheduling of production orders when these orders are scheduled
on the week end.
Problem description:
On day 1 the short term planner schedules production orders in PPT1 (APO) on the
week end.
During the night these production orders are re-exploded in ECC (see: COR2 => Read
Master Data)
On day 2 the end production date of orders that were in the week end, have moved
by the system to the Sunday night.
Step 1: The order is scheduled on the week end on Saturday 14 March 2015.
Step 2: We explode the order in ECC
In ECC, we have:
But if we check the order in APO, we have:
You can see that the process order are placed at the night of sunday, also if in ECC after explosion was always where was planned.
Have you any idea how to avoid that the process order moving in APO ?
Thanks Gurus.
Livio

Hi
You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
br, Ajay M

My ipad is not moving from the icloud backup

My ipad is stuck with the icloud backup on the screen and pressing the ignore or the setting key it is still not moving. Any help

Hi..
After inserting my credentials, the new icon of my new app appears on the screen. On this moment an error appears, in dutch "Verbinding met iTunes store mislukt" meaning, "Connection with iTunes store failed"
Be aware, your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
edited by: cs

Microphone not working during the phone calls

Hi dear colleagues,
I've been using my STL100-2 for 3 weeks and suddenly my microphone stopped working during the phone calls.
It is 100% not a hardware problem because voice input works fine.
The microphone works correctly when I turn the speaker on. And when I use the headset as well.
What is wrong there? I tried hard reset, flashed my BB to the latest 10.2 and it didn't solve my problem: the other side could not hear me.b
Please, help me as I cannot do a very simple thing - make calls on my phone without those freaky tricks.
Thank you!

I have a similar problem, I found that it worked ok after I made a Skype call to the phone or if I called the phone from my playbook using video chat it would seem to start working, then it got worse and I found if I squeezed near the mick it would work ok. I also saw another thread where they had similar problems and solutions were possibly linked to loose screws on the plastic casing around the area of the mic as the author suggests it could be an assembly issue. I plan to check mine when I get to work tomorrow as I have no screw drivers small enough on my person right now. Anyway try it you never know it may give you a clue to the problem.
cheers.....

TS1363 my iphone4 is not moving pass the boot screen help

Help my Iphone4 will not go pass the boot up page its just sittes there

Try doing a Reset, as decribed here
http://support.apple.com/kb/HT1430
where is says Resetting your device.

The logo for the application has been changed in Azure portal, but it's not reflected during the login

Hi Azure support,
my name is Linda, Office365 technical support. I want to ask one Azure question on behalf on my customer. she has AAD_basic subscription.
she tried to change logo of one application, but failed. she followed the steps as below:
1. add the "Logo" in the application;
2. logo not reflect in the login page.
I cannot attach the screenshot, if you want, you could email me v-linsha
hope you could give some suggestion and resolution. thank you.

Sometimes I know I haven't changed anything in the external file. In this case, the supposed conflict seems to be a bug and I overwrite with Lightroom metadata without exception (but with fingers crossed) - that bug has been reported.
Other times however, I have edited the file in an external editor, and its possible that the external editor wants to add some information that may be worth having, or it may be that its lost the original information - this is when its a dilemma:
If I overwrite disk file with Lightroom metadata, I may be losing what the external editor added.
If I overwrite Lightroom metadata with disk data, I may be losing what Lightroom had and the external editor dropped.
This scenario has not been reported as a bug, since I don't know if it is one. If I could see the difference between the two, then I'd know.
Rob

Photoshop CC transform boundaries are not moving with the object...HELP

All of a sudden when rotating an object the white boundary boxes are not staying with the object which is causing me tons of problems!! How do I fix this?

There are many way to make templated to populate one like you have a background layer with placement layers above you need to add images and clip them to the placement layers.
I create mine with differently to allow automated population.
Photo Collage Toolkit
Photoshop scripting is powerful and I believe this package demonstrates this A video showing a 5 image collage PSD template being populates with images:
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples

Mouse not moving during the talk

Similar Messages

Maybe you are looking for