Mouse not working no yellow light

My touch pad isn't working and there isn't a yellow light in the corner notifying me that it's locked out. Everything was working fine when I shut down last night does any one have any suggestions.

You are still under warranty.  Call Apple tech support and let them deal w/it.

Similar Messages

  • Touchpad not working indecate yellow light

    touchpad not working indecate yellow light

    I think it is telling you that you need a firmware update.  Happend to me

  • My apple tv is not working, the front light its blinking

    my apple tv is not working the front light its blinking the only image on my tv is the apple picture

    You need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • Magic mouse not working in mountain lion

    magic mouse not working in mountain lion....What can I do?

    Have you tried a fresh set of Alkaline Batteries?
    Was  it ever paired to another divice?

  • Mouse not working in open applications

    Mouse not working properly on menu bar in certain applications: Text Edit, Calendar, Notes.  You can hover over the  red X but it will not close the application.  Also unable to click on a text form and drop the cursor in to edit or copy text.  Can open preference box but uanable to navigate because mouse will not click.  Have to now use keyboard to open and close most applications.  Virus?  Setting that got magically turned on?  Have powered down, checked batteries, etc.

    This is not due to a virus, or any other kind of malware.
    First, is this a wired mouse or a Bluetooth mouse? If it's a Bluetooth mouse, try changing the batteries, even if they should be fully charged.
    Have you tried a different mouse? If not, try that. Borrow one from a friend or buy a cheap wired mouse and see if that makes a difference.
    If the problem affects all mice, try restarting in safe mode. Does the problem happen while in that mode? If not, and if it comes back when you restart normally, then you have some kind of third-party software that is causing the problem. The trick will be figuring out what it is.

  • Mouse not working when reinstalling OS X with install disk

    I am trying to reinstall OS X 10.3 on iMAC G5 after a hard drive crash with the help of the original install disks, but my wireless mouse does not work anymore. Any ideas how I can solve this or go through the installation process with the keyboard alone? I couldn't find a keyboard shortcut to tab from a list in a window to the select button...

    How is your mouse not working? Is it dead?
    Is the wireless mouse a Mighty Mouse or a 3rd party mouse?
    Does you mouse need batteries?
    *Just in case it's dirty:*
    http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
    Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
    TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
    "Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
    Some cell phone leather cases actually fit right over the Mighty Mouse.
    Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
    Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.
    Only do the following if your warranty has run out:
    Cleaning inside and dismantling the Apple Mighty Mouse
    If so, then I suggest (if your 1 year warranty is not up and/or you have Apple Care Protecton Plan) you call Apple Tech Support & ask for a replacement.
    =========================
    Mighty Mouse Take Apart Photos

  • My apple TV box is not working. The light blinks but the TV only shows the apple picture and nothing happens. Any ideas what is wrong?

    My apple TV is not working. The light blinks but the TV only shows the apple picture and nothing happens. Any idea why?

    James,
    Thank you for the information. I did what you said but it is still not working. My apple box works with my wifi so I think the wife was disconnected and I can't figure out where to go to set up the wifi pass word for the apple box. Any hits would be appreciated if not my next step is to ship back the box to apple.
    Thanks,
    Marta

  • Hi i installed wrong iousbfamily on osx and now my login screen is frozen, keyboard and mouse not working plz help

    hi i installed wrong iousbfamily on osx and now my login screen is frozen, keyboard and mouse not working plz help

    How and why did you install that?  What steps did you take in that process.  I can then help with some steps to undo them. 

  • Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

    Hi.
     I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
    The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
    I have checked the software that  I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
    But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
    But the web cam is not working. Could you help me fix this problem?
    Best regards:
    JEIO71

    I have a pavilion dv6 notepad. it's about a year old.
    about a month ago internal webcam truevision hd stop working.
    Called hp tech. they sent a box for me to ship the laptop.
    they hp tech attempted to correct the problem via internet
    did not work.
    wanted me to do a restore to factory setting i stopped him there.
    Webcam detected in device manager.
    the webcam light come on but no image.
    I actually see the back drop through the image space.
    running windows 7, fully updated.
    I found many comments on the web about the webcam connector disconnecting.
    But if it was the case with my computer, the webcam would not be detected.
    Many other comments suggests to do a restore to factory setting but \i read also that
    does not work often.
    I read many comments where disappointed clients believe hp should update
    the software but the driver is actually microsoft dating back to june 2006.
    Is it possible it's  a hardware problem, ie webcam is burned out.
    I have received a box to sent it and know they will do a system restore.
    Don't feel to go that way.
    Many comments refers to hp making an effort to get a driver update.
    ps I decided to purchase a logitech webcam, works perfectly.
    What else can I do to fix this problem.
    Can hp send me another internal webcam.

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Does anyone know how to fix my 2010 macbook air the keyboard and mouse not working

    keyboard and mouse not working on macbook air ?

    Hi aaphillylawyer,
    Welcome to Apple Support Communities.
    The article linked below provides some general troubleshooting tips that may resolve the issue with the keyboard on the MacBook Air.
    Mac OS X 10.6: If keys on your keyboard don’t work
    http://support.apple.com/kb/PH6748
    I hope this helps.
    -Jason

  • Bluetooth mouse not working

    Bluetooth mouse not working.
    can click and scroll but pointer will not move.

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • Ultraslim wireless keyboard and mouse not working

    Hi ,  I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
    Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
    I looked online for troubleshooting options, but did not find anything.
    The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
    My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
    can the nano reciever be replaced;
    any other options to troubleshoot;
    any chance that this could be a software problem
    Thanks

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My imac  keyboard and mouse not working

    On my imac,keyboard and mouse not working,i can't login or do anything,i have tried unplug mains,plug back,hold power botton alt  cmd p and r all at same time for 40sec still nothing,i need help bec i can't use my imac please help

    How about telling us how your keyboard & mouse are not working?  Are both using batteries or are they wired?  If batteries, have you checked and/or changed them?  Keyboard & mouse Apple's or 3rd party?  If you are still under warranty and/or have AC, call them & let Apple deal w/your problems.
    If possible, try another keyboard & mouse? 
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    ================
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

Maybe you are looking for

  • CLOB datatype is PSP

    I want to upload a file to a clob field in the database and also I want to save the data in a clob field to a file using PSP. Is this possible. any body has done any work on this. Please help. Mohan

  • Trouble installing an E4600 processor into 945GCM5-F V2

    I'm having a problem with this, i manage to get the chip in correctly and close the "lid" over it, but the catch that keeps it all in place slips out and pops up meaning that its not secure. Ami doing soemthing wrong or is it faulty? Matt

  • Customer Credit and Collection options

    Hello, There is a "Credit and Collection" section under Customer Account Profile. I want to understand about all the options, another word, how all these options works, specially RISK code , Credit Rating and Credit Clafication....How do they came in

  • FLV file doesn't start or play

    Hi, Brand new to Strobe, watched a couple vids you all put out and downloaded the StrobeMediaPlayback_1.5.1-full.zip.  Used setup.htm to create code...my flv was encoded with Sorenson Squeeze 4.1 using Spark Pro codec...I copied the file StrobeMediaP

  • Shaded band on Table of Contents page

    Hi everyone I wonder if anyone can help me with a query on the Table of Contents page?  Everything is looking good except that at the bottom of the page there is a shaded square on the left and a band all the way across the page and extending beyond